From 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Thu, 30 Oct 2008 23:22:04 +0100 Subject: Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX) Signed-off-by: Bartlomiej Sieka --- doc/README.update | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'doc/README.update') diff --git a/doc/README.update b/doc/README.update index a4760025bf..48f03b7802 100644 --- a/doc/README.update +++ b/doc/README.update @@ -39,11 +39,11 @@ The auto-update feature uses the following configuration knobs: These knobs control the timeouts during initial connection to the TFTP server. Since a transfer is attempted during each boot, it is undesirable to have a long delay when a TFTP server is not present. - CONFIG_UPDATE_TFTP_MSEC_MAX specifies the number of seconds to wait for the - server to respond to initial connection, and CONFIG_UPDATE_TFTP_CNT_MAX + CONFIG_UPDATE_TFTP_MSEC_MAX specifies the number of milliseconds to wait for + the server to respond to initial connection, and CONFIG_UPDATE_TFTP_CNT_MAX gives the number of such connection retries. CONFIG_UPDATE_TFTP_CNT_MAX must be non-negative and is 0 by default, CONFIG_UPDATE_TFTP_MSEC_MAX must be - positive and is 1 by default. + positive and is 100 by default. Since the update file is in FIT format, it is created from an *.its file using the mkimage tool. dtc tool with support for binary includes, e.g. in version -- cgit v1.2.3