From ec4c544bed9b026cdf93084fb0daa73ec53a9cda Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 9 Feb 2004 23:12:24 +0000 Subject: Patches by Stephan Linz, 30 Jan 2004: 1: - board/altera/common/flash.c:flash_erase(): o allow interrupts befor get_timer() call o check-up each erased sector and avoid unexpected timeouts - board/altera/dk1c20/dk1s10.c:board_early_init_f(): o enclose sevenseg_set() in cpp condition - remove the ASMI configuration for DK1S10_standard_32 (never present) - fix some typed in mistakes in the NIOS documentation 2: - split DK1C20 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1C20.h 3: - split DK1S10 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1S10.h 4: - Add support for the Microtronix Linux Development Kit NIOS CPU configuration at the Altera Nios Development Kit, Stratix Edition (DK-1S10) 5: - Add documentation for the Altera Nios Development Kit, Stratix Edition (DK-1S10) 6: - Add support for the Nios Serial Peripharel Interface (SPI) (master only) 7: - Add support for the common U-Boot SPI framework at RTC driver DS1306 --- doc/README.dk1c20 | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'doc/README.dk1c20') diff --git a/doc/README.dk1c20 b/doc/README.dk1c20 index bf3b6995e10..3c0e41bf7d6 100644 --- a/doc/README.dk1c20 +++ b/doc/README.dk1c20 @@ -24,7 +24,7 @@ Contents: 1. Files ========= - board/dk1c20/* + board/altera/dk1c20/* include/configs/DK1C20.h 2. Memory Organization @@ -73,11 +73,7 @@ see the following: 2. Quit nios-run and start your terminal application (e.g. start Hyperterminal or minicom). -3. From the U-Boot command prompt, erase flash 0x40000 to 0x 5ffff: - - ==> erase 1:4-5 - -4. Download the u-boot code to RAM. When using Hyperterminal, do the +3. Download the u-boot code to RAM. When using Hyperterminal, do the following: a. From the u-boot command prompt start a binary download to SRAM: @@ -86,6 +82,10 @@ following: b. Download u-boot.bin using kermit. +4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff: + + ==> erase 1:4-5 + 5. Copy the binary image from SRAM to flash: ==> cp.b 800000 40000 10000 -- cgit v1.2.3