From 52affe04fa5493597d8a5f6202507190950a32e6 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Tue, 9 Mar 2010 19:17:52 -0600 Subject: ColdFire: Update processors' serial port configuration Provide parameter passing to uart_port_config(). Update port configuration - un-mask it before enable the bits. Signed-off-by: TsiChung Liew --- cpu/mcf5227x/cpu_init.c | 4 ++-- cpu/mcf523x/cpu_init.c | 26 ++++++++++++++------ cpu/mcf52x2/cpu_init.c | 61 +++++++++++++++++++++++++---------------------- cpu/mcf532x/cpu_init.c | 29 +++++++++++++++------- cpu/mcf5445x/cpu_init.c | 32 +++++++++++++++++++++---- cpu/mcf547x_8x/cpu_init.c | 4 ++-- 6 files changed, 105 insertions(+), 51 deletions(-) (limited to 'cpu') diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c index d336857edf..beb78f5839 100644 --- a/cpu/mcf5227x/cpu_init.c +++ b/cpu/mcf5227x/cpu_init.c @@ -125,12 +125,12 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_uart &= (GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK); diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index 3c04fd4134..0f299f0c3c 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -130,21 +130,32 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart &= ~(GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart |= (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); break; case 1: - gpio->par_uart = - (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + gpio->par_uart &= + ~(GPIO_PAR_UART_U1RXD_MASK | GPIO_PAR_UART_U1TXD_MASK); + gpio->par_uart |= + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); break; case 2: - gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#ifdef CONFIG_SYS_UART2_PRI_GPIO + gpio->par_uart &= ~(GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + gpio->par_uart |= (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + gpio->feci2c |= + (GPIO_PAR_FECI2C_EMDC_U2TXD | GPIO_PAR_FECI2C_EMDIO_U2RXD); +#endif break; } } @@ -156,7 +167,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear) if (setclear) { gpio->par_feci2c |= - (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + (GPIO_PAR_FECI2C_EMDC_FECEMDC | + GPIO_PAR_FECI2C_EMDIO_FECEMDIO); } else { gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 747c1cf90d..170bbfc356 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -135,12 +135,12 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_uart &= GPIO_PAR_UART0_UNMASK; gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); @@ -247,15 +247,19 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { + volatile u32 *par = (u32 *) MMAP_PAR; + /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { - case 0: - break; + switch (port) { case 1: + *par &= 0xFFE7FFFF; + *par |= 0x00180000; break; case 2: + *par &= 0xFFFFFFFC; + *par &= 0x00000003; break; } } @@ -291,21 +295,26 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { + u16 temp; + /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | - MCF_GPIO_PAR_UART_U0RXD); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xFFF3; + temp |= (MCF_GPIO_PAR_UART_U0TXD | MCF_GPIO_PAR_UART_U0RXD); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; case 1: - mbar_writeShort(MCF_GPIO_PAR_UART, - MCF_GPIO_PAR_UART_U1RXD_UART1 | - MCF_GPIO_PAR_UART_U1TXD_UART1); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xF0FF; + temp |= (MCF_GPIO_PAR_UART_U1RXD_UART1 | MCF_GPIO_PAR_UART_U1TXD_UART1); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; case 2: - mbar_writeShort(MCF_GPIO_PAR_UART, 0x3000); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xCFFF; + temp |= (0x3000); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; } } @@ -409,12 +418,12 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK); gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD); @@ -487,19 +496,22 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: + gpio->par_uart &= ~UART0_ENABLE_MASK; gpio->par_uart |= UART0_ENABLE_MASK; break; case 1: + gpio->par_uart &= ~UART1_ENABLE_MASK; gpio->par_uart |= UART1_ENABLE_MASK; break; case 2: + gpio->par_uart &= ~UART2_ENABLE_MASK; gpio->par_uart |= UART2_ENABLE_MASK; break; } @@ -621,10 +633,10 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: MCFGPIO_PUAPAR &= 0xFc; MCFGPIO_PUAPAR |= 0x03; @@ -729,14 +741,7 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { - /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { - case 0: - break; - case 1: - break; - } } #endif /* #if defined(CONFIG_M5249) */ diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 04160a8294..6f551b60c9 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -133,19 +133,21 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + gpio->par_uart &= ~(GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); break; case 1: #ifdef CONFIG_SYS_UART1_ALT1_GPIO gpio->par_simp1h &= - ~(GPIO_PAR_SIMP1H_DATA1_UNMASK | GPIO_PAR_SIMP1H_VEN1_UNMASK); + ~(GPIO_PAR_SIMP1H_DATA1_UNMASK | + GPIO_PAR_SIMP1H_VEN1_UNMASK); gpio->par_simp1h |= (GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD); #elif defined(CONFIG_SYS_UART1_ALT2_GPIO) @@ -297,22 +299,33 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + gpio->par_uart &= ~(GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + gpio->par_uart |= (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); break; case 1: - gpio->par_uart = + gpio->par_uart &= + ~(GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); + gpio->par_uart |= (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); break; case 2: +#ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_timer &= 0x0F; gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) + gpio->par_feci2c &= 0xFF00; + gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_UTXD2 | GPIO_PAR_FECI2C_SDA_URXD2); +#elif defined(CONFIG_SYS_UART2_ALT3_GPIO) + gpio->par_ssi &= 0xF0FF; + gpio->par_ssi |= (GPIO_PAR_SSI_RXD(2) | GPIO_PAR_SSI_TXD(2)); +#endif break; } } diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 00b7910ccd..00e0ca6da9 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -128,19 +128,43 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = + gpio->par_uart &= + ~(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); + gpio->par_uart |= (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); break; case 1: - gpio->par_uart = +#ifdef CONFIG_SYS_UART1_PRI_GPIO + gpio->par_uart &= + ~(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); + gpio->par_uart |= (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); +#elif defined(CONFIG_SYS_UART1_ALT1_GPIO) + gpio->par_ssi &= + (GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK); + gpio->par_ssi |= + (GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD); +#endif + break; + case 2: +#if defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->par_timer &= + (GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK); + gpio->par_timer |= + (GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) + gpio->par_timer &= + (GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK); + gpio->par_timer |= + (GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); +#endif break; } } diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c index 96a3132b78..60c91267a7 100644 --- a/cpu/mcf547x_8x/cpu_init.c +++ b/cpu/mcf547x_8x/cpu_init.c @@ -113,13 +113,13 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; volatile u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40); /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_psc0 = (GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0); break; -- cgit v1.2.3