From f0d1246ed7cb5a88522244c596d7ae7e6f161283 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 27 Jun 2007 13:34:26 +0200 Subject: atmel_mci: Use 512 byte blocksize if possible Instead of always using the largest blocksize the card supports, check if it can support smaller block sizes and use 512 bytes if possible. Most cards do support this, and other parts of u-boot seem to have trouble with block sizes different from 512 bytes. Also enable underrun/overrun protection. Signed-off-by: Haavard Skinnemoen Acked-by: Hans-Christian Egtvedt --- cpu/at32ap/atmel_mci.c | 21 +++++++++++++++++---- cpu/at32ap/atmel_mci.h | 4 ++++ 2 files changed, 21 insertions(+), 4 deletions(-) (limited to 'cpu/at32ap') diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c index 9f62c0f14b..bdca1c19f4 100644 --- a/cpu/at32ap/atmel_mci.c +++ b/cpu/at32ap/atmel_mci.c @@ -82,7 +82,9 @@ static void mci_set_mode(unsigned long hz, unsigned long blklen) blklen &= 0xfffc; mmci_writel(MR, (MMCI_BF(CLKDIV, clkdiv) - | MMCI_BF(BLKLEN, blklen))); + | MMCI_BF(BLKLEN, blklen) + | MMCI_BIT(RDPROOF) + | MMCI_BIT(WRPROOF))); } #define RESP_NO_CRC 1 @@ -225,7 +227,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt, *buffer++ = data; wordcount++; } - } while(wordcount < (512 / 4)); + } while(wordcount < (mmc_blkdev.blksz / 4)); pr_debug("mmc: read %u words, waiting for BLKE\n", wordcount); @@ -243,7 +245,7 @@ out: fail: mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR); - printf("mmc: bread failed, card status = ", card_status); + printf("mmc: bread failed, card status = %08x\n", card_status); goto out; } @@ -409,6 +411,7 @@ int mmc_init(int verbose) { struct mmc_cid cid; struct mmc_csd csd; + unsigned int max_blksz; int ret; /* Initialize controller */ @@ -444,7 +447,17 @@ int mmc_init(int verbose) sizeof(mmc_blkdev.product)); sprintf((char *)mmc_blkdev.revision, "%x %x", cid.prv >> 4, cid.prv & 0x0f); - mmc_blkdev.blksz = 1 << csd.read_bl_len; + + /* + * If we can't use 512 byte blocks, refuse to deal with the + * card. Tons of code elsewhere seems to depend on this. + */ + max_blksz = 1 << csd.read_bl_len; + if (max_blksz < 512 || (max_blksz > 512 && !csd.read_bl_partial)) { + printf("Card does not support 512 byte reads, aborting.\n"); + return -ENODEV; + } + mmc_blkdev.blksz = 512; mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2)); mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz); diff --git a/cpu/at32ap/atmel_mci.h b/cpu/at32ap/atmel_mci.h index 0ffbc4fd09..5b4f5c99b6 100644 --- a/cpu/at32ap/atmel_mci.h +++ b/cpu/at32ap/atmel_mci.h @@ -57,6 +57,10 @@ #define MMCI_CLKDIV_SIZE 8 #define MMCI_PWSDIV_OFFSET 8 #define MMCI_PWSDIV_SIZE 3 +#define MMCI_RDPROOF_OFFSET 11 +#define MMCI_RDPROOF_SIZE 1 +#define MMCI_WRPROOF_OFFSET 12 +#define MMCI_WRPROOF_SIZE 1 #define MMCI_PDCPADV_OFFSET 14 #define MMCI_PDCPADV_SIZE 1 #define MMCI_PDCMODE_OFFSET 15 -- cgit v1.2.3