From f3a8e2b7d41ca9039e934b5a59899dd57c577fa3 Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Mon, 26 Oct 2015 19:47:52 +0800 Subject: armv8/ls1043ardb: Add LS1043ARDB board support LS1043ARDB Specification: ------------------------- Memory subsystem: * 2GByte DDR4 SDRAM (32bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * XFI 10G port * QSGMII with 4x 1G ports * Two RGMII ports PCIe: * PCIe2 (Lanes C) to mini-PCIe slot * PCIe3 (Lanes D) to PCIe slot USB 3.0: two super speed USB 3.0 type A ports UART: supports two UARTs up to 115200 bps for console Signed-off-by: Hou Zhiqiang Signed-off-by: Li Yang Signed-off-by: Mingkai Hu Signed-off-by: York Sun Signed-off-by: Gong Qianyu --- configs/ls1043ardb_defconfig | 4 ++++ 1 file changed, 4 insertions(+) create mode 100644 configs/ls1043ardb_defconfig (limited to 'configs/ls1043ardb_defconfig') diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig new file mode 100644 index 0000000000..ae84d2e5c5 --- /dev/null +++ b/configs/ls1043ardb_defconfig @@ -0,0 +1,4 @@ +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_ARM=y +CONFIG_TARGET_LS1043ARDB=y +CONFIG_FSL_LAYERSCAPE=y -- cgit v1.2.3