From 5653fc335a450fa46d89989e1afe5e8bb9a0a52e Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 8 Feb 2004 22:55:38 +0000 Subject: * Patch by Yuli Barcohen, 26 Jan 2004: Allow bzip2 compression for small memory footprint boards * Patch by Brad Kemp, 21 Jan 2004: Add support for CFI flash driver for both the Intel and the AMD command sets. * Patch by Travis Sawyer, 20 Jan 2004: Fix pci bridge auto enumeration of sibling p2p bridges. * Patch by Tolunay Orkun, 12 Jan 2004: Add some delays as needed for Intel LXT971A PHY support * Patches by Stephan Linz, 09 Jan 2004: - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c - make DK1C20 board configuration related to ASMI conform to documentation --- common/cmd_bootm.c | 8 +++++++- common/miiphyutil.c | 4 +++- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'common') diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 34a74ce2c5..ac9c32e7b8 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -333,8 +333,14 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #ifdef CONFIG_BZIP2 case IH_COMP_BZIP2: printf (" Uncompressing %s ... ", name); + /* + * If we've got less than 4 MB of malloc() space, + * use slower decompression algorithm which requires + * at most 2300 KB of memory. + */ i = BZ2_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load), - &unc_len, (char *)data, len, 0, 0); + &unc_len, (char *)data, len, + CFG_MALLOC_LEN < (4096 * 1024), 0); if (i != BZ_OK) { printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i); SHOW_BOOT_PROGRESS (-6); diff --git a/common/miiphyutil.c b/common/miiphyutil.c index af8c7c7a31..03964da81f 100644 --- a/common/miiphyutil.c +++ b/common/miiphyutil.c @@ -99,7 +99,9 @@ int miiphy_reset (unsigned char addr) #endif return (-1); } - +#ifdef CONFIG_PHY_RESET_DELAY + udelay (CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */ +#endif /* * Poll the control register for the reset bit to go to 0 (it is * auto-clearing). This should happen within 0.5 seconds per the -- cgit v1.2.3