From 7d9aa8fd87171164a6f14167a0c9c066f4312b8d Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Thu, 28 Feb 2013 18:08:40 +0000 Subject: usb: Add new command to set USB 2.0 port test modes This patch adds a new 'usb test' command, that will set a port to a USB 2.0 test mode (see USB 2.0 spec 7.1.20). It supports all five test modes on both downstream hub ports and ordinary device's upstream ports. In addition, it supports EHCI root hub ports. Signed-off-by: Julius Werner --- common/cmd_usb.c | 121 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 98 insertions(+), 23 deletions(-) (limited to 'common/cmd_usb.c') diff --git a/common/cmd_usb.c b/common/cmd_usb.c index dacdc2d5b1c..adc5f02a2cb 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -269,6 +269,22 @@ static void usb_display_config(struct usb_device *dev) printf("\n"); } +static struct usb_device *usb_find_device(int devnum) +{ + struct usb_device *dev; + int d; + + for (d = 0; d < USB_MAX_DEVICE; d++) { + dev = usb_get_dev_index(d); + if (dev == NULL) + return NULL; + if (dev->devnum == devnum) + return dev; + } + + return NULL; +} + static inline char *portspeed(int speed) { if (speed == USB_SPEED_HIGH) @@ -348,6 +364,66 @@ static void usb_show_tree(struct usb_device *dev) usb_show_tree_graph(dev, &preamble[0]); } +static int usb_test(struct usb_device *dev, int port, char* arg) +{ + int mode; + + if (port > dev->maxchild) { + printf("Device is no hub or does not have %d ports.\n", port); + return 1; + } + + switch (arg[0]) { + case 'J': + case 'j': + printf("Setting Test_J mode"); + mode = USB_TEST_MODE_J; + break; + case 'K': + case 'k': + printf("Setting Test_K mode"); + mode = USB_TEST_MODE_K; + break; + case 'S': + case 's': + printf("Setting Test_SE0_NAK mode"); + mode = USB_TEST_MODE_SE0_NAK; + break; + case 'P': + case 'p': + printf("Setting Test_Packet mode"); + mode = USB_TEST_MODE_PACKET; + break; + case 'F': + case 'f': + printf("Setting Test_Force_Enable mode"); + mode = USB_TEST_MODE_FORCE_ENABLE; + break; + default: + printf("Unrecognized test mode: %s\nAvailable modes: " + "J, K, S[E0_NAK], P[acket], F[orce_Enable]\n", arg); + return 1; + } + + if (port) + printf(" on downstream facing port %d...\n", port); + else + printf(" on upstream facing port...\n"); + + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_FEATURE, + port ? USB_RT_PORT : USB_RECIP_DEVICE, + port ? USB_PORT_FEAT_TEST : USB_FEAT_TEST, + (mode << 8) | port, + NULL, 0, USB_CNTL_TIMEOUT) == -1) { + printf("Error during SET_FEATURE.\n"); + return 1; + } else { + printf("Test mode successfully set. Use 'usb start' " + "to return to normal operation.\n"); + return 0; + } +} + /****************************************************************************** * usb boot command intepreter. Derived from diskboot @@ -441,17 +517,9 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } else { - int d; - - i = simple_strtoul(argv[2], NULL, 16); + i = simple_strtoul(argv[2], NULL, 10); printf("config for device %d\n", i); - for (d = 0; d < USB_MAX_DEVICE; d++) { - dev = usb_get_dev_index(d); - if (dev == NULL) - break; - if (dev->devnum == i) - break; - } + dev = usb_find_device(i); if (dev == NULL) { printf("*** No device available ***\n"); return 0; @@ -462,6 +530,18 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } + if (strncmp(argv[1], "test", 4) == 0) { + if (argc < 5) + return CMD_RET_USAGE; + i = simple_strtoul(argv[2], NULL, 10); + dev = usb_find_device(i); + if (dev == NULL) { + printf("Device %d does not exist.\n", i); + return 1; + } + i = simple_strtoul(argv[3], NULL, 10); + return usb_test(dev, i, argv[4]); + } #ifdef CONFIG_USB_STORAGE if (strncmp(argv[1], "stor", 4) == 0) return usb_stor_info(); @@ -571,7 +651,6 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; } -#ifdef CONFIG_USB_STORAGE U_BOOT_CMD( usb, 5, 1, do_usb, "USB sub-system", @@ -580,30 +659,26 @@ U_BOOT_CMD( "usb stop [f] - stop USB [f]=force stop\n" "usb tree - show USB device tree\n" "usb info [dev] - show available USB devices\n" + "usb test [dev] [port] [mode] - set USB 2.0 test mode\n" + " (specify port 0 to indicate the device's upstream port)\n" + " Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]\n" +#ifdef CONFIG_USB_STORAGE "usb storage - show details of USB storage devices\n" "usb dev [dev] - show or set current USB storage device\n" "usb part [dev] - print partition table of one or all USB storage" - " devices\n" + " devices\n" "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" " to memory address `addr'\n" "usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n" " from memory address `addr'" +#endif /* CONFIG_USB_STORAGE */ ); +#ifdef CONFIG_USB_STORAGE U_BOOT_CMD( usbboot, 3, 1, do_usbboot, "boot from USB device", "loadAddr dev:part" ); - -#else -U_BOOT_CMD( - usb, 5, 1, do_usb, - "USB sub-system", - "start - start (scan) USB controller\n" - "usb reset - reset (rescan) USB controller\n" - "usb tree - show USB device tree\n" - "usb info [dev] - show available USB devices" -); -#endif +#endif /* CONFIG_USB_STORAGE */ -- cgit v1.2.3 From 6497c66704d03956e7ea49b54fcaa38740736416 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Fri, 12 Apr 2013 16:34:38 +0530 Subject: USB: SS: Add support for Super Speed USB interface This adds usb framework support for super-speed usb, which will further facilitate to add stack support for xHCI. Signed-off-by: Vikas C Sajjan Signed-off-by: Vivek Gautam --- common/cmd_usb.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'common/cmd_usb.c') diff --git a/common/cmd_usb.c b/common/cmd_usb.c index adc5f02a2cb..70e803b5bb6 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -287,12 +287,24 @@ static struct usb_device *usb_find_device(int devnum) static inline char *portspeed(int speed) { - if (speed == USB_SPEED_HIGH) - return "480 Mb/s"; - else if (speed == USB_SPEED_LOW) - return "1.5 Mb/s"; - else - return "12 Mb/s"; + char *speed_str; + + switch (speed) { + case USB_SPEED_SUPER: + speed_str = "5 Gb/s"; + break; + case USB_SPEED_HIGH: + speed_str = "480 Mb/s"; + break; + case USB_SPEED_LOW: + speed_str = "1.5 Mb/s"; + break; + default: + speed_str = "12 Mb/s"; + break; + } + + return speed_str; } /* shows the device tree recursively */ -- cgit v1.2.3