From 72a8cf8dccf6f8b86d1683205e032a94eaa86938 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 17 Jan 2016 20:53:51 -0700 Subject: Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Heiko Schocher Acked-by: Stefan Roese Acked-by: Przemyslaw Marczak --- common/cmd_fdc.c | 752 ------------------------------------------------------- 1 file changed, 752 deletions(-) delete mode 100644 common/cmd_fdc.c (limited to 'common/cmd_fdc.c') diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c deleted file mode 100644 index 5766b5650b6..00000000000 --- a/common/cmd_fdc.c +++ /dev/null @@ -1,752 +0,0 @@ -/* - * (C) Copyright 2001 - * Denis Peter, MPL AG, d.peter@mpl.ch. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* - * Floppy Disk support - */ - -#include -#include -#include -#include - - -#undef FDC_DEBUG - -#ifdef FDC_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -/*#if defined(CONFIG_CMD_DATE) */ -/*#include */ -/*#endif */ - -typedef struct { - int flags; /* connected drives ect */ - unsigned long blnr; /* Logical block nr */ - uchar drive; /* drive no */ - uchar cmdlen; /* cmd length */ - uchar cmd[16]; /* cmd desc */ - uchar dma; /* if > 0 dma enabled */ - uchar result[11]; /* status information */ - uchar resultlen; /* lenght of result */ -} FDC_COMMAND_STRUCT; - -/* flags: only the lower 8bit used: - * bit 0 if set drive 0 is present - * bit 1 if set drive 1 is present - * bit 2 if set drive 2 is present - * bit 3 if set drive 3 is present - * bit 4 if set disk in drive 0 is inserted - * bit 5 if set disk in drive 1 is inserted - * bit 6 if set disk in drive 2 is inserted - * bit 7 if set disk in drive 4 is inserted - */ - -/* cmd indexes */ -#define COMMAND 0 -#define DRIVE 1 -#define CONFIG0 1 -#define SPEC_HUTSRT 1 -#define TRACK 2 -#define CONFIG1 2 -#define SPEC_HLT 2 -#define HEAD 3 -#define CONFIG2 3 -#define SECTOR 4 -#define SECTOR_SIZE 5 -#define LAST_TRACK 6 -#define GAP 7 -#define DTL 8 -/* result indexes */ -#define STATUS_0 0 -#define STATUS_PCN 1 -#define STATUS_1 1 -#define STATUS_2 2 -#define STATUS_TRACK 3 -#define STATUS_HEAD 4 -#define STATUS_SECT 5 -#define STATUS_SECT_SIZE 6 - - -/* Register addresses */ -#define FDC_BASE 0x3F0 -#define FDC_SRA FDC_BASE + 0 /* Status Register A */ -#define FDC_SRB FDC_BASE + 1 /* Status Register B */ -#define FDC_DOR FDC_BASE + 2 /* Digital Output Register */ -#define FDC_TDR FDC_BASE + 3 /* Tape Drive Register */ -#define FDC_DSR FDC_BASE + 4 /* Data rate Register */ -#define FDC_MSR FDC_BASE + 4 /* Main Status Register */ -#define FDC_FIFO FDC_BASE + 5 /* FIFO */ -#define FDC_DIR FDC_BASE + 6 /* Digital Input Register */ -#define FDC_CCR FDC_BASE + 7 /* Configuration Control */ -/* Commands */ -#define FDC_CMD_SENSE_INT 0x08 -#define FDC_CMD_CONFIGURE 0x13 -#define FDC_CMD_SPECIFY 0x03 -#define FDC_CMD_RECALIBRATE 0x07 -#define FDC_CMD_READ 0x06 -#define FDC_CMD_READ_TRACK 0x02 -#define FDC_CMD_READ_ID 0x0A -#define FDC_CMD_DUMP_REG 0x0E -#define FDC_CMD_SEEK 0x0F - -#define FDC_CMD_SENSE_INT_LEN 0x01 -#define FDC_CMD_CONFIGURE_LEN 0x04 -#define FDC_CMD_SPECIFY_LEN 0x03 -#define FDC_CMD_RECALIBRATE_LEN 0x02 -#define FDC_CMD_READ_LEN 0x09 -#define FDC_CMD_READ_TRACK_LEN 0x09 -#define FDC_CMD_READ_ID_LEN 0x02 -#define FDC_CMD_DUMP_REG_LEN 0x01 -#define FDC_CMD_SEEK_LEN 0x03 - -#define FDC_FIFO_THR 0x0C -#define FDC_FIFO_DIS 0x00 -#define FDC_IMPLIED_SEEK 0x01 -#define FDC_POLL_DIS 0x00 -#define FDC_PRE_TRK 0x00 -#define FDC_CONFIGURE FDC_FIFO_THR | (FDC_POLL_DIS<<4) | (FDC_FIFO_DIS<<5) | (FDC_IMPLIED_SEEK << 6) -#define FDC_MFM_MODE 0x01 /* MFM enable */ -#define FDC_SKIP_MODE 0x00 /* skip enable */ - -#define FDC_TIME_OUT 100000 /* time out */ -#define FDC_RW_RETRIES 3 /* read write retries */ -#define FDC_CAL_RETRIES 3 /* calibration and seek retries */ - - -/* Disk structure */ -typedef struct { - unsigned int size; /* nr of sectors total */ - unsigned int sect; /* sectors per track */ - unsigned int head; /* nr of heads */ - unsigned int track; /* nr of tracks */ - unsigned int stretch; /* !=0 means double track steps */ - unsigned char gap; /* gap1 size */ - unsigned char rate; /* data rate. |= 0x40 for perpendicular */ - unsigned char spec1; /* stepping rate, head unload time */ - unsigned char fmt_gap;/* gap2 size */ - unsigned char hlt; /* head load time */ - unsigned char sect_code;/* Sector Size code */ - const char * name; /* used only for predefined formats */ -} FD_GEO_STRUCT; - - -/* supported Floppy types (currently only one) */ -const static FD_GEO_STRUCT floppy_type[2] = { - { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,16,2,"H1440" }, /* 7 1.44MB 3.5" */ - { 0, 0,0, 0,0,0x00,0x00,0x00,0x00, 0,0,NULL }, /* end of table */ -}; - -static FDC_COMMAND_STRUCT cmd; /* global command struct */ - -/* If the boot drive number is undefined, we assume it's drive 0 */ -#ifndef CONFIG_SYS_FDC_DRIVE_NUMBER -#define CONFIG_SYS_FDC_DRIVE_NUMBER 0 -#endif - -/* Hardware access */ -#ifndef CONFIG_SYS_ISA_IO_STRIDE -#define CONFIG_SYS_ISA_IO_STRIDE 1 -#endif - -#ifndef CONFIG_SYS_ISA_IO_OFFSET -#define CONFIG_SYS_ISA_IO_OFFSET 0 -#endif - -/* Supporting Functions */ -/* reads a Register of the FDC */ -unsigned char read_fdc_reg(unsigned int addr) -{ - volatile unsigned char *val = - (volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS + - (addr * CONFIG_SYS_ISA_IO_STRIDE) + - CONFIG_SYS_ISA_IO_OFFSET); - - return val [0]; -} - -/* writes a Register of the FDC */ -void write_fdc_reg(unsigned int addr, unsigned char val) -{ - volatile unsigned char *tmp = - (volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS + - (addr * CONFIG_SYS_ISA_IO_STRIDE) + - CONFIG_SYS_ISA_IO_OFFSET); - tmp[0]=val; -} - -/* waits for an interrupt (polling) */ -int wait_for_fdc_int(void) -{ - unsigned long timeout; - timeout = FDC_TIME_OUT; - while((read_fdc_reg(FDC_SRA)&0x80)==0) { - timeout--; - udelay(10); - if(timeout==0) /* timeout occured */ - return false; - } - return true; -} - -/* reads a byte from the FIFO of the FDC and checks direction and RQM bit - of the MSR. returns -1 if timeout, or byte if ok */ -int read_fdc_byte(void) -{ - unsigned long timeout; - timeout = FDC_TIME_OUT; - while((read_fdc_reg(FDC_MSR)&0xC0)!=0xC0) { - /* direction out and ready */ - udelay(10); - timeout--; - if(timeout==0) /* timeout occured */ - return -1; - } - return read_fdc_reg(FDC_FIFO); -} - -/* if the direction of the FIFO is wrong, this routine is used to - empty the FIFO. Should _not_ be used */ -int fdc_need_more_output(void) -{ - unsigned char c; - while((read_fdc_reg(FDC_MSR)&0xC0)==0xC0) { - c=(unsigned char)read_fdc_byte(); - printf("Error: more output: %x\n",c); - } - return true; -} - - -/* writes a byte to the FIFO of the FDC and checks direction and RQM bit - of the MSR */ -int write_fdc_byte(unsigned char val) -{ - unsigned long timeout; - timeout = FDC_TIME_OUT; - while((read_fdc_reg(FDC_MSR)&0xC0)!=0x80) { - /* direction in and ready for byte */ - timeout--; - udelay(10); - fdc_need_more_output(); - if(timeout==0) /* timeout occured */ - return false; - } - write_fdc_reg(FDC_FIFO,val); - return true; -} - -/* sets up all FDC commands and issues it to the FDC. If - the command causes direct results (no Execution Phase) - the result is be read as well. */ - -int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) -{ - int i; - unsigned long head,track,sect,timeout; - track = pCMD->blnr / (pFG->sect * pFG->head); /* track nr */ - sect = pCMD->blnr % (pFG->sect * pFG->head); /* remaining blocks */ - head = sect / pFG->sect; /* head nr */ - sect = sect % pFG->sect; /* remaining blocks */ - sect++; /* sectors are 1 based */ - PRINTF("Cmd 0x%02x Track %ld, Head %ld, Sector %ld, Drive %d (blnr %ld)\n", - pCMD->cmd[0],track,head,sect,pCMD->drive,pCMD->blnr); - - if(head|=0) { /* max heads = 2 */ - pCMD->cmd[DRIVE]=pCMD->drive | 0x04; /* head 1 */ - pCMD->cmd[HEAD]=(unsigned char) head; /* head register */ - } - else { - pCMD->cmd[DRIVE]=pCMD->drive; /* head 0 */ - pCMD->cmd[HEAD]=(unsigned char) head; /* head register */ - } - pCMD->cmd[TRACK]=(unsigned char) track; /* track */ - switch (pCMD->cmd[COMMAND]) { - case FDC_CMD_READ: - pCMD->cmd[SECTOR]=(unsigned char) sect; /* sector */ - pCMD->cmd[SECTOR_SIZE]=pFG->sect_code; /* sector size code */ - pCMD->cmd[LAST_TRACK]=pFG->sect; /* End of track */ - pCMD->cmd[GAP]=pFG->gap; /* gap */ - pCMD->cmd[DTL]=0xFF; /* DTL */ - pCMD->cmdlen=FDC_CMD_READ_LEN; - pCMD->cmd[COMMAND]|=(FDC_MFM_MODE<<6); /* set MFM bit */ - pCMD->cmd[COMMAND]|=(FDC_SKIP_MODE<<5); /* set Skip bit */ - pCMD->resultlen=0; /* result only after execution */ - break; - case FDC_CMD_SEEK: - pCMD->cmdlen=FDC_CMD_SEEK_LEN; - pCMD->resultlen=0; /* no result */ - break; - case FDC_CMD_CONFIGURE: - pCMD->cmd[CONFIG0]=0; - pCMD->cmd[CONFIG1]=FDC_CONFIGURE; /* FIFO Threshold, Poll, Enable FIFO */ - pCMD->cmd[CONFIG2]=FDC_PRE_TRK; /* Precompensation Track */ - pCMD->cmdlen=FDC_CMD_CONFIGURE_LEN; - pCMD->resultlen=0; /* no result */ - break; - case FDC_CMD_SPECIFY: - pCMD->cmd[SPEC_HUTSRT]=pFG->spec1; - pCMD->cmd[SPEC_HLT]=(pFG->hlt)<<1; /* head load time */ - if(pCMD->dma==0) - pCMD->cmd[SPEC_HLT]|=0x1; /* no dma */ - pCMD->cmdlen=FDC_CMD_SPECIFY_LEN; - pCMD->resultlen=0; /* no result */ - break; - case FDC_CMD_DUMP_REG: - pCMD->cmdlen=FDC_CMD_DUMP_REG_LEN; - pCMD->resultlen=10; /* 10 byte result */ - break; - case FDC_CMD_READ_ID: - pCMD->cmd[COMMAND]|=(FDC_MFM_MODE<<6); /* set MFM bit */ - pCMD->cmdlen=FDC_CMD_READ_ID_LEN; - pCMD->resultlen=7; /* 7 byte result */ - break; - case FDC_CMD_RECALIBRATE: - pCMD->cmd[DRIVE]&=0x03; /* don't set the head bit */ - pCMD->cmdlen=FDC_CMD_RECALIBRATE_LEN; - pCMD->resultlen=0; /* no result */ - break; - break; - case FDC_CMD_SENSE_INT: - pCMD->cmdlen=FDC_CMD_SENSE_INT_LEN; - pCMD->resultlen=2; - break; - } - for(i=0;icmdlen;i++) { - /* PRINTF("write cmd%d = 0x%02X\n",i,pCMD->cmd[i]); */ - if (write_fdc_byte(pCMD->cmd[i]) == false) { - PRINTF("Error: timeout while issue cmd%d\n",i); - return false; - } - } - timeout=FDC_TIME_OUT; - for(i=0;iresultlen;i++) { - while((read_fdc_reg(FDC_MSR)&0xC0)!=0xC0) { - timeout--; - if(timeout==0) { - PRINTF(" timeout while reading result%d MSR=0x%02X\n",i,read_fdc_reg(FDC_MSR)); - return false; - } - } - pCMD->result[i]=(unsigned char)read_fdc_byte(); - } - return true; -} - -/* selects the drive assigned in the cmd structur and - switches on the Motor */ -void select_fdc_drive(FDC_COMMAND_STRUCT *pCMD) -{ - unsigned char val; - - val=(1<<(4+pCMD->drive))|pCMD->drive|0xC; /* set reset, dma gate and motor bits */ - if((read_fdc_reg(FDC_DOR)&val)!=val) { - write_fdc_reg(FDC_DOR,val); - for(val=0;val<255;val++) - udelay(500); /* wait some time to start motor */ - } -} - -/* switches off the Motor of the specified drive */ -void stop_fdc_drive(FDC_COMMAND_STRUCT *pCMD) -{ - unsigned char val; - - val=(1<<(4+pCMD->drive))|pCMD->drive; /* sets motor bits */ - write_fdc_reg(FDC_DOR,(read_fdc_reg(FDC_DOR)&~val)); -} - -/* issues a recalibrate command, waits for interrupt and - * issues a sense_interrupt */ -int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) -{ - pCMD->cmd[COMMAND]=FDC_CMD_RECALIBRATE; - if (fdc_issue_cmd(pCMD, pFG) == false) - return false; - while (wait_for_fdc_int() != true); - - pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT; - return(fdc_issue_cmd(pCMD,pFG)); -} - -/* issues a recalibrate command, waits for interrupt and - * issues a sense_interrupt */ -int fdc_seek(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) -{ - pCMD->cmd[COMMAND]=FDC_CMD_SEEK; - if (fdc_issue_cmd(pCMD, pFG) == false) - return false; - while (wait_for_fdc_int() != true); - - pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT; - return(fdc_issue_cmd(pCMD,pFG)); -} - -/* terminates current command, by not servicing the FIFO - * waits for interrupt and fills in the result bytes */ -int fdc_terminate(FDC_COMMAND_STRUCT *pCMD) -{ - int i; - for(i=0;i<100;i++) - udelay(500); /* wait 500usec for fifo overrun */ - while((read_fdc_reg(FDC_SRA)&0x80)==0x00); /* wait as long as no int has occured */ - for(i=0;i<7;i++) { - pCMD->result[i]=(unsigned char)read_fdc_byte(); - } - return true; -} - -/* reads data from FDC, seek commands are issued automatic */ -int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) -{ - /* first seek to start address */ - unsigned long len,readblk,i,timeout,ii,offset; - unsigned char c,retriesrw,retriescal; - unsigned char *bufferw; /* working buffer */ - int sect_size; - int flags; - - flags=disable_interrupts(); /* switch off all Interrupts */ - select_fdc_drive(pCMD); /* switch on drive */ - sect_size=0x080<sect_code; - retriesrw=0; - retriescal=0; - offset=0; - if (fdc_seek(pCMD, pFG) == false) { - stop_fdc_drive(pCMD); - if (flags) - enable_interrupts(); - return false; - } - if((pCMD->result[STATUS_0]&0x20)!=0x20) { - printf("Seek error Status: %02X\n",pCMD->result[STATUS_0]); - stop_fdc_drive(pCMD); - if (flags) - enable_interrupts(); - return false; - } - /* now determine the next seek point */ - /* lastblk=pCMD->blnr + blocks; */ - /* readblk=(pFG->head*pFG->sect)-(pCMD->blnr%(pFG->head*pFG->sect)); */ - readblk=pFG->sect-(pCMD->blnr%pFG->sect); - PRINTF("1st nr of block possible read %ld start %ld\n",readblk,pCMD->blnr); - if(readblk>blocks) /* is end within 1st track */ - readblk=blocks; /* yes, correct it */ - PRINTF("we read %ld blocks start %ld\n",readblk,pCMD->blnr); - bufferw = &buffer[0]; /* setup working buffer */ - do { -retryrw: - len=sect_size * readblk; - pCMD->cmd[COMMAND]=FDC_CMD_READ; - if (fdc_issue_cmd(pCMD, pFG) == false) { - stop_fdc_drive(pCMD); - if (flags) - enable_interrupts(); - return false; - } - for (i=0;i6) { - for(ii=0;ii<7;ii++) { - pCMD->result[ii]=bufferw[(i-7+ii)]; - } /* for */ - } - if(retriesrw++>FDC_RW_RETRIES) { - if (retriescal++>FDC_CAL_RETRIES) { - stop_fdc_drive(pCMD); - if (flags) - enable_interrupts(); - return false; - } - else { - PRINTF(" trying to recalibrate Try %d\n",retriescal); - if (fdc_recalibrate(pCMD, pFG) == false) { - stop_fdc_drive(pCMD); - if (flags) - enable_interrupts(); - return false; - } - retriesrw=0; - goto retrycal; - } /* else >FDC_CAL_RETRIES */ - } - else { - PRINTF("Read retry %d\n",retriesrw); - goto retryrw; - } /* else >FDC_RW_RETRIES */ - }/* if output */ - timeout--; - } while (true); - } /* for len */ - /* the last sector of a track or all data has been read, - * we need to get the results */ - fdc_terminate(pCMD); - offset+=(sect_size*readblk); /* set up buffer pointer */ - bufferw = &buffer[offset]; - pCMD->blnr+=readblk; /* update current block nr */ - blocks-=readblk; /* update blocks */ - if(blocks==0) - break; /* we are finish */ - /* setup new read blocks */ - /* readblk=pFG->head*pFG->sect; */ - readblk=pFG->sect; - if(readblk>blocks) - readblk=blocks; -retrycal: - /* a seek is necessary */ - if (fdc_seek(pCMD, pFG) == false) { - stop_fdc_drive(pCMD); - if (flags) - enable_interrupts(); - return false; - } - if((pCMD->result[STATUS_0]&0x20)!=0x20) { - PRINTF("Seek error Status: %02X\n",pCMD->result[STATUS_0]); - stop_fdc_drive(pCMD); - return false; - } - } while (true); /* start over */ - stop_fdc_drive(pCMD); /* switch off drive */ - if (flags) - enable_interrupts(); - return true; -} - -/* Scan all drives and check if drive is present and disk is inserted */ -int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) -{ - int i,drives,state; - /* OK procedure of data book is satisfied. - * trying to get some information over the drives */ - state=0; /* no drives, no disks */ - for(drives=0;drives<4;drives++) { - pCMD->drive=drives; - select_fdc_drive(pCMD); - pCMD->blnr=0; /* set to the 1st block */ - if (fdc_recalibrate(pCMD, pFG) == false) - continue; - if((pCMD->result[STATUS_0]&0x10)==0x10) - continue; - /* ok drive connected check for disk */ - state|=(1<blnr=pFG->size; /* set to the last block */ - if (fdc_seek(pCMD, pFG) == false) - continue; - pCMD->blnr=0; /* set to the 1st block */ - if (fdc_recalibrate(pCMD, pFG) == false) - continue; - pCMD->cmd[COMMAND]=FDC_CMD_READ_ID; - if (fdc_issue_cmd(pCMD, pFG) == false) - continue; - state|=(0x10<name : ""); - } - pCMD->flags=state; - return true; -} - - -/************************************************************************** -* int fdc_setup -* setup the fdc according the datasheet -* assuming in PS2 Mode -*/ -int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) -{ - int i; - -#ifdef CONFIG_SYS_FDC_HW_INIT - fdc_hw_init (); -#endif - /* first, we reset the FDC via the DOR */ - write_fdc_reg(FDC_DOR,0x00); - for(i=0; i<255; i++) /* then we wait some time */ - udelay(500); - /* then, we clear the reset in the DOR */ - pCMD->drive=drive; - select_fdc_drive(pCMD); - /* initialize the CCR */ - write_fdc_reg(FDC_CCR,pFG->rate); - /* then initialize the DSR */ - write_fdc_reg(FDC_DSR,pFG->rate); - if (wait_for_fdc_int() == false) { - PRINTF("Time Out after writing CCR\n"); - return false; - } - /* now issue sense Interrupt and status command - * assuming only one drive present (drive 0) */ - pCMD->dma=0; /* we don't use any dma at all */ - for(i=0;i<4;i++) { - /* issue sense interrupt for all 4 possible drives */ - pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT; - if (fdc_issue_cmd(pCMD, pFG) == false) { - PRINTF("Sense Interrupt for drive %d failed\n",i); - } - } - /* issue the configure command */ - pCMD->drive=drive; - select_fdc_drive(pCMD); - pCMD->cmd[COMMAND]=FDC_CMD_CONFIGURE; - if (fdc_issue_cmd(pCMD, pFG) == false) { - PRINTF(" configure timeout\n"); - stop_fdc_drive(pCMD); - return false; - } - /* issue specify command */ - pCMD->cmd[COMMAND]=FDC_CMD_SPECIFY; - if (fdc_issue_cmd(pCMD, pFG) == false) { - PRINTF(" specify timeout\n"); - stop_fdc_drive(pCMD); - return false; - - } - /* then, we clear the reset in the DOR */ - /* fdc_check_drive(pCMD,pFG); */ - /* write_fdc_reg(FDC_DOR,0x04); */ - - return true; -} - -/**************************************************************************** - * main routine do_fdcboot - */ -int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - FD_GEO_STRUCT *pFG = (FD_GEO_STRUCT *)floppy_type; - FDC_COMMAND_STRUCT *pCMD = &cmd; - unsigned long addr,imsize; -#if defined(CONFIG_IMAGE_FORMAT_LEGACY) - image_header_t *hdr; /* used for fdc boot */ -#endif - unsigned char boot_drive; - int i,nrofblk; -#if defined(CONFIG_FIT) - const void *fit_hdr = NULL; -#endif - - switch (argc) { - case 1: - addr = CONFIG_SYS_LOAD_ADDR; - boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER; - break; - case 2: - addr = simple_strtoul(argv[1], NULL, 16); - boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER; - break; - case 3: - addr = simple_strtoul(argv[1], NULL, 16); - boot_drive=simple_strtoul(argv[2], NULL, 10); - break; - default: - return CMD_RET_USAGE; - } - /* setup FDC and scan for drives */ - if (fdc_setup(boot_drive, pCMD, pFG) == false) { - printf("\n** Error in setup FDC **\n"); - return 1; - } - if (fdc_check_drive(pCMD, pFG) == false) { - printf("\n** Error in check_drives **\n"); - return 1; - } - if((pCMD->flags&(1<flags&(0x10<drive=boot_drive; - /* read first block */ - pCMD->blnr=0; - if (fdc_read_data((unsigned char *)addr, 1, pCMD, pFG) == false) { - printf("\nRead error:"); - for(i=0;i<7;i++) - printf("result%d: 0x%02X\n",i,pCMD->result[i]); - return 1; - } - - switch (genimg_get_format ((void *)addr)) { -#if defined(CONFIG_IMAGE_FORMAT_LEGACY) - case IMAGE_FORMAT_LEGACY: - hdr = (image_header_t *)addr; - image_print_contents (hdr); - - imsize = image_get_image_size (hdr); - break; -#endif -#if defined(CONFIG_FIT) - case IMAGE_FORMAT_FIT: - fit_hdr = (const void *)addr; - puts ("Fit image detected...\n"); - - imsize = fit_get_size (fit_hdr); - break; -#endif - default: - puts ("** Unknown image type\n"); - return 1; - } - - nrofblk=imsize/512; - if((imsize%512)>0) - nrofblk++; - printf("Loading %ld Bytes (%d blocks) at 0x%08lx..\n",imsize,nrofblk,addr); - pCMD->blnr=0; - if (fdc_read_data((unsigned char *)addr, nrofblk, pCMD, pFG) == false) { - /* read image block */ - printf("\nRead error:"); - for(i=0;i<7;i++) - printf("result%d: 0x%02X\n",i,pCMD->result[i]); - return 1; - } - printf("OK %ld Bytes loaded.\n",imsize); - - flush_cache (addr, imsize); - -#if defined(CONFIG_FIT) - /* This cannot be done earlier, we need complete FIT image in RAM first */ - if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) { - if (!fit_check_format (fit_hdr)) { - puts ("** Bad FIT image format\n"); - return 1; - } - fit_print_contents (fit_hdr); - } -#endif - - /* Loading ok, update default load address */ - load_addr = addr; - - return bootm_maybe_autostart(cmdtp, argv[0]); -} - -U_BOOT_CMD( - fdcboot, 3, 1, do_fdcboot, - "boot from floppy device", - "loadAddr drive" -); -- cgit v1.2.3