From bea3f28d285942bf3f7ab339ce85178ded544225 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Wed, 12 Jul 2006 10:48:05 -0400 Subject: Add support for reading and writing mac addresses to or from ID EEPROM. Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). With attached patch, we can use command "mac/mac read/mac save/" to read and write EEPROM under u-boot prompt. U-boot will calculate the checksum of EEPROM while bootup, if it is right, then u-boot will check whether the mac address of eTSEC0/1/2/3 is availalbe (non-zero). If there is mac address availabe in EEPROM, u-boot will use it, otherewise, u-boot will use the mac address defined in MPC8641HPCN.h. This matches the requirement to set unique mac address for each TSEC port. Signed-off-by: Haiying Wang Signed-off-by: York Sun --- common/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'common/Makefile') diff --git a/common/Makefile b/common/Makefile index eb0b5dadfe..a62bc16e85 100644 --- a/common/Makefile +++ b/common/Makefile @@ -51,7 +51,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ memsize.o miiphybb.o miiphyutil.o \ s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \ usb.o usb_kbd.o usb_storage.o \ - virtex2.o xilinx.o crc16.o xyzModem.o + virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o OBJS = $(AOBJS) $(COBJS) -- cgit v1.2.3