From 6954756a1567bd4dc36081651c266dbcf9ad4ef5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 20 Dec 2019 12:44:57 +0100 Subject: cmd: spi: Permit setting bus frequency The 'sspi' command hard-coded 1 MHz bus frequency for all transmissions. Allow changing that at runtime by specifying '@freq' bus frequency in Hz. Signed-off-by: Marek Vasut Cc: Tom Rini Reviewed-by: Lukasz Majewski Reviewed-by: Jagan Teki --- cmd/spi.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'cmd') diff --git a/cmd/spi.c b/cmd/spi.c index 75226fd368..bfa185b6ae 100644 --- a/cmd/spi.c +++ b/cmd/spi.c @@ -28,6 +28,7 @@ static unsigned int bus; static unsigned int cs; static unsigned int mode; +static unsigned int freq; static int bitlen; static uchar dout[MAX_SPI_BYTES]; static uchar din[MAX_SPI_BYTES]; @@ -45,12 +46,12 @@ static int do_spi_xfer(int bus, int cs) str = strdup(name); if (!str) return -ENOMEM; - ret = spi_get_bus_and_cs(bus, cs, 1000000, mode, "spi_generic_drv", + ret = spi_get_bus_and_cs(bus, cs, freq, mode, "spi_generic_drv", str, &dev, &slave); if (ret) return ret; #else - slave = spi_setup_slave(bus, cs, 1000000, mode); + slave = spi_setup_slave(bus, cs, freq, mode); if (!slave) { printf("Invalid device %d:%d\n", bus, cs); return -EINVAL; @@ -106,6 +107,8 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * We use the last specified parameters, unless new ones are * entered. */ + if (freq == 0) + freq = 1000000; if ((flag & CMD_FLAG_REPEAT) == 0) { @@ -119,7 +122,9 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) bus = CONFIG_DEFAULT_SPI_BUS; } if (*cp == '.') - mode = simple_strtoul(cp+1, NULL, 10); + mode = simple_strtoul(cp+1, &cp, 10); + if (*cp == '@') + freq = simple_strtoul(cp+1, &cp, 10); } if (argc >= 3) bitlen = simple_strtoul(argv[2], NULL, 10); @@ -159,10 +164,11 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( sspi, 5, 1, do_spi, "SPI utility command", - "[:][.] - Send and receive bits\n" + "[:][.][@] - Send and receive bits\n" " - Identifies the SPI bus\n" " - Identifies the chip select\n" " - Identifies the SPI mode to use\n" + " - Identifies the SPI bus frequency in Hz\n" " - Number of bits to send (base 10)\n" " - Hexadecimal string that gets sent" ); -- cgit v1.2.3