From 4f25617758b2e768e6579202269180c5b7a817eb Mon Sep 17 00:00:00 2001 From: Simon Goldschmidt Date: Tue, 26 Mar 2019 13:38:52 +0100 Subject: eeprom: fix DM_I2C support without CONFIG_SYS_I2C_EEPROM_BUS The current device model enabled eeprom code only works if CONFIG_SYS_I2C_EEPROM_BUS is set. This patch makes it work without that define so that the bus number passed to 'eeprom_init' is used. Signed-off-by: Simon Goldschmidt Reviewed-by: Heiko Schocher --- cmd/eeprom.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'cmd') diff --git a/cmd/eeprom.c b/cmd/eeprom.c index 6c29b33ba3..7b1f81477f 100644 --- a/cmd/eeprom.c +++ b/cmd/eeprom.c @@ -59,6 +59,10 @@ #endif #endif +#if defined(CONFIG_DM_I2C) +int eeprom_i2c_bus; +#endif + __weak int eeprom_write_enable(unsigned dev_addr, int state) { return 0; @@ -67,7 +71,9 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state) void eeprom_init(int bus) { /* I2C EEPROM */ -#if defined(CONFIG_SYS_I2C) +#if defined(CONFIG_DM_I2C) + eeprom_i2c_bus = bus; +#elif defined(CONFIG_SYS_I2C) if (bus >= 0) i2c_set_bus_num(bus); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); @@ -124,14 +130,14 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen, { int ret = 0; -#if defined(CONFIG_DM_I2C) && defined(CONFIG_SYS_I2C_EEPROM_BUS) +#if defined(CONFIG_DM_I2C) struct udevice *dev; - ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_EEPROM_BUS, addr[0], + ret = i2c_get_chip_for_busnum(eeprom_i2c_bus, addr[0], alen - 1, &dev); if (ret) { printf("%s: Cannot find udev for a bus %d\n", __func__, - CONFIG_SYS_I2C_EEPROM_BUS); + eeprom_i2c_bus); return CMD_RET_FAILURE; } @@ -141,15 +147,12 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen, ret = dm_i2c_write(dev, offset, buffer, len); #else /* Non DM I2C support - will be removed */ -#if defined(CONFIG_SYS_I2C_EEPROM_BUS) - i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); -#endif if (read) ret = i2c_read(addr[0], offset, alen - 1, buffer, len); else ret = i2c_write(addr[0], offset, alen - 1, buffer, len); -#endif /* CONFIG_DM_I2C && CONFIG_SYS_I2C_EEPROM_BUS */ +#endif /* CONFIG_DM_I2C */ if (ret) ret = CMD_RET_FAILURE; @@ -164,6 +167,10 @@ static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer, int rcode = 0; uchar addr[3]; +#if defined(CONFIG_SYS_I2C_EEPROM_BUS) + eeprom_init(CONFIG_SYS_I2C_EEPROM_BUS); +#endif + while (offset < end) { alen = eeprom_addr(dev_addr, offset, addr); -- cgit v1.2.3 From bbecfd4cf2a8f7baeef6037303b8b4380a71aa12 Mon Sep 17 00:00:00 2001 From: Simon Goldschmidt Date: Tue, 26 Mar 2019 13:38:53 +0100 Subject: Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT" This reverts commit 65a97e7fcf54feb7c4ebe1aee8a572830af4cf51. The 'eeprom' command has been converted to work with DM_I2C in a patch submitted around the same time as this commit: commit 0c07a9b4078d ("eeprom: Add device model based I2C support to eeprom command") Signed-off-by: Simon Goldschmidt Reviewed-by: Simon Glass Reviewed-by: Heiko Schocher --- cmd/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'cmd') diff --git a/cmd/Kconfig b/cmd/Kconfig index 5d1999ee0b..31ca7a2d02 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -455,7 +455,6 @@ config CRC32_VERIFY config CMD_EEPROM bool "eeprom - EEPROM subsystem" - depends on !DM_I2C || DM_I2C_COMPAT help (deprecated, needs conversion to driver model) Provides commands to read and write EEPROM (Electrically Erasable -- cgit v1.2.3