From 304db0b38cfb04cfdb05a740d5ef27da06ea98ea Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 24 Sep 2013 08:22:19 +0200 Subject: arm: Remove IXP425 boards pdnb3 and scpu Remove Prodrive pdnb3 board (including the scpu variant) support from mainline. As its unmaintained and not needed any more for quite some time. Signed-off-by: Stefan Roese Cc: Martijn de Gouw Cc: Albert Aribaud --- boards.cfg | 2 -- 1 file changed, 2 deletions(-) (limited to 'boards.cfg') diff --git a/boards.cfg b/boards.cfg index aa2ee642d4..7869474c69 100644 --- a/boards.cfg +++ b/boards.cfg @@ -366,8 +366,6 @@ Active arm ixp - - actux1 Active arm ixp - - actux1 actux1_4_32 actux1:FLASH2X2,RAM_32MB Michael Schwingen Active arm ixp - - actux1 actux1_8_16 actux1:FLASH1X8 Michael Schwingen Active arm ixp - - actux1 actux1_8_32 actux1:FLASH1X8,RAM_32MB Michael Schwingen -Active arm ixp - prodrive pdnb3 pdnb3 - Stefan Roese -Active arm ixp - prodrive pdnb3 scpu pdnb3:SCPU Stefan Roese Active arm pxa - - - balloon3 - Marek Vasut Active arm pxa - - - h2200 - Lukasz Dalek Active arm pxa - - - palmld - Marek Vasut -- cgit v1.2.3 From 0c5e26678b18e136c1514bf769a16060ae1b5ff8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 26 Sep 2013 22:59:25 -0300 Subject: udoo: Add initial support for mx6q udoo board Add basic support for mx6q udoo board. For further information about Udoo board: http://www.udoo.org/ Tested booting a mainline device tree kernel and a Yocto rootfs from mmc. Signed-off-by: Fabio Estevam --- boards.cfg | 1 + 1 file changed, 1 insertion(+) (limited to 'boards.cfg') diff --git a/boards.cfg b/boards.cfg index aa2ee642d4..2461d3b9a9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -287,6 +287,7 @@ Active arm armv7 mx5 freescale mx53smd Active arm armv7 mx5 genesi mx51_efikamx mx51_efikamx mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg - Active arm armv7 mx5 genesi mx51_efikamx mx51_efikasb mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg - Active arm armv7 mx5 ttcontrol vision2 vision2 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg Stefano Babic +Active arm armv7 mx6 - udoo udoo_quad udoo:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024 Fabio Estevam Active arm armv7 mx6 - wandboard wandboard_dl wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 Fabio Estevam Active arm armv7 mx6 - wandboard wandboard_quad wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 Fabio Estevam Active arm armv7 mx6 - wandboard wandboard_solo wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 Fabio Estevam -- cgit v1.2.3 From f97271612bb1767e0c0b816827603380d7d7e1b6 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 20 Sep 2013 16:14:13 +0200 Subject: ARM: mxs: Add PPC-AG BG0900 board This board supports FEC Ethernet, SPI NOR and NAND flash. Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Christoph Baumann --- boards.cfg | 1 + 1 file changed, 1 insertion(+) (limited to 'boards.cfg') diff --git a/boards.cfg b/boards.cfg index 2461d3b9a9..cec154b984 100644 --- a/boards.cfg +++ b/boards.cfg @@ -207,6 +207,7 @@ Active arm arm926ejs mxs freescale mx28evk Active arm arm926ejs mxs freescale mx28evk mx28evk_auart_console mx28evk:MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC Fabio Estevam Active arm arm926ejs mxs freescale mx28evk mx28evk_nand mx28evk:ENV_IS_IN_NAND Fabio Estevam Active arm arm926ejs mxs olimex mx23_olinuxino mx23_olinuxino mx23_olinuxino Marek Vasut +Active arm arm926ejs mxs ppcag bg0900 bg0900 bg0900 Marek Vasut Active arm arm926ejs mxs sandisk sansa_fuze_plus sansa_fuze_plus - Marek Vasut Active arm arm926ejs mxs schulercontrol sc_sps_1 sc_sps_1 - Marek Vasut Active arm arm926ejs nomadik st nhk8815 nhk8815 - Nomadik Linux Team :Alessandro Rubini -- cgit v1.2.3 From 4225f1a14dd402c8201c817fe576ec37055ccf92 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 2 Sep 2013 10:04:01 +0200 Subject: ARM: IGEP0033: rename config file to am335x_igep0033.h There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC. Since the IGEP COM AQUILA use a TI AM335x processor is better to rename its board config to use this naming scheme. Signed-off-by: Javier Martinez Canillas Acked-by: Enric Balletbo i Serra --- boards.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'boards.cfg') diff --git a/boards.cfg b/boards.cfg index 7869474c69..0124db1dea 100644 --- a/boards.cfg +++ b/boards.cfg @@ -246,7 +246,7 @@ Active arm arm946es - armltd integrator Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - - Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel -Active arm armv7 am33xx isee igep0033 igep0033 - Enric Balletbo i Serra +Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra Active arm armv7 am33xx phytec pcm051 pcm051 pcm051 Lars Poeschel Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier -- cgit v1.2.3 From f565be758ef3448f915d8774f0065e8f487fa1d1 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 2 Sep 2013 10:04:02 +0200 Subject: OMAP3: igep00x0: rename config file to omap3_igep00x0.h There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC. Since the IGEPv2 board and the IGEP COM Module use a TI OMAP35xx/DM37xx processor, is better to rename its board config to use this naming scheme. Signed-off-by: Javier Martinez Canillas Acked-by: Enric Balletbo i Serra --- boards.cfg | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'boards.cfg') diff --git a/boards.cfg b/boards.cfg index 0124db1dea..6b4dfef12e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -311,11 +311,11 @@ Active arm armv7 omap3 comelit dig297 Active arm armv7 omap3 compulab cm_t35 cm_t35 - Igor Grinberg Active arm armv7 omap3 corscience tricorder tricorder - Thomas Weber Active arm armv7 omap3 htkw mcx mcx - Ilya Yanok -Active arm armv7 omap3 isee igep00x0 igep0020 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND Enric Balletbo i Serra -Active arm armv7 omap3 isee igep00x0 igep0020_nand igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND - -Active arm armv7 omap3 isee igep00x0 igep0030 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND Enric Balletbo i Serra -Active arm armv7 omap3 isee igep00x0 igep0030_nand igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND - -Active arm armv7 omap3 isee igep00x0 igep0032 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND Enric Balletbo i Serra +Active arm armv7 omap3 isee igep00x0 igep0020 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND Enric Balletbo i Serra +Active arm armv7 omap3 isee igep00x0 igep0020_nand omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND - +Active arm armv7 omap3 isee igep00x0 igep0030 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND Enric Balletbo i Serra +Active arm armv7 omap3 isee igep00x0 igep0030_nand omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND - +Active arm armv7 omap3 isee igep00x0 igep0032 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND Enric Balletbo i Serra Active arm armv7 omap3 logicpd am3517evm am3517_evm - Vaibhav Hiremath Active arm armv7 omap3 logicpd omap3som omap3_logic - Peter Barada Active arm armv7 omap3 logicpd zoom1 omap3_zoom1 - Nishanth Menon -- cgit v1.2.3 From a1c38c0569ad761be2661fee0bdf8798aff15e62 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Fri, 6 Sep 2013 15:04:49 +0200 Subject: tricorder: add configuration for a flashcard u-boot MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 'flashcard' u-boot configuration has a readonly environment and boots a bare kernel/initrd to program the device from an clean environment. Signed-off-by: Andreas Bießmann --- boards.cfg | 1 + 1 file changed, 1 insertion(+) (limited to 'boards.cfg') diff --git a/boards.cfg b/boards.cfg index 6b4dfef12e..0d4f2e0866 100644 --- a/boards.cfg +++ b/boards.cfg @@ -310,6 +310,7 @@ Active arm armv7 omap3 8dtech eco5pk Active arm armv7 omap3 comelit dig297 dig297 - Luca Ceresoli Active arm armv7 omap3 compulab cm_t35 cm_t35 - Igor Grinberg Active arm armv7 omap3 corscience tricorder tricorder - Thomas Weber +Active arm armv7 omap3 corscience tricorder tricorder_flash tricorder:FLASHCARD Thomas Weber Active arm armv7 omap3 htkw mcx mcx - Ilya Yanok Active arm armv7 omap3 isee igep00x0 igep0020 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND Enric Balletbo i Serra Active arm armv7 omap3 isee igep00x0 igep0020_nand omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND - -- cgit v1.2.3 From a13cbf5f208b59797d08199604f2701b6c3b9f64 Mon Sep 17 00:00:00 2001 From: Minal Shah Date: Fri, 4 Oct 2013 14:52:02 -0400 Subject: dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 build UART booting is supported on this SoC, but via UART3 rather than UART1. Because of this we must change the board to use UART3 for all console access (only one UART is exposed on this board and a slight HW mod is required to switch UARTs). Signed-off-by: Minal Shah [trini: Make apply to mainline, reword commit] Signed-off-by: Tom Rini --- boards.cfg | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'boards.cfg') diff --git a/boards.cfg b/boards.cfg index 0d4f2e0866..3a56eab28e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -334,7 +334,8 @@ Active arm armv7 omap3 ti sdp3430 Active arm armv7 omap3 timll devkit8000 devkit8000 - Thomas Weber Active arm armv7 omap4 ti panda omap4_panda - Sricharan R Active arm armv7 omap4 ti sdp4430 omap4_sdp4430 - Sricharan R -Active arm armv7 omap5 ti dra7xx dra7xx_evm - Lokesh Vutla +Active arm armv7 omap5 ti dra7xx dra7xx_evm dra7xx_evm:CONS_INDEX=1 Lokesh Vutla +Active arm armv7 omap5 ti dra7xx dra7xx_evm_uart3 dra7xx_evm:CONS_INDEX=3,SPL_YMODEM_SUPPORT Lokesh Vutla Active arm armv7 omap5 ti omap5_uevm omap5_uevm - - Active arm armv7 rmobile atmark-techno armadillo-800eva armadillo-800eva - Nobuhiro Iwamatsu Active arm armv7 rmobile kmc kzm9g kzm9g - Nobuhiro Iwamatsu :Tetsuyuki Kobayashi -- cgit v1.2.3