From 028ab6b598b628326116acd88e0f35aa9f526d12 Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 23 Feb 2004 23:54:43 +0000 Subject: * Patch by Peter Ryser, 20 Feb 2004: Add support for the Xilinx ML300 platform * Patch by Stephan Linz, 17 Feb 2004: Fix watchdog support for NIOS * Patch by Josh Fryman, 16 Feb 2004: Fix byte-swapping for cfi_flash.c for different bus widths * Patch by Jon Diekema, 14 Jeb 2004: Remove duplicate "FPGA Support" notes from the README file --- board/emk/top860/top860.c | 1 - board/omap1610inn/omap1610innovator.c | 10 +- board/omap1610inn/platform.S | 4 +- board/xilinx/common/xbasic_types.c | 165 +++ board/xilinx/common/xbasic_types.h | 283 +++++ board/xilinx/common/xbuf_descriptor.h | 252 ++++ board/xilinx/common/xdma_channel.c | 738 +++++++++++ board/xilinx/common/xdma_channel.h | 291 +++++ board/xilinx/common/xdma_channel_i.h | 110 ++ board/xilinx/common/xdma_channel_sg.c | 1317 +++++++++++++++++++ board/xilinx/common/xio.h | 81 ++ board/xilinx/common/xipif_v1_23_b.h | 763 +++++++++++ board/xilinx/common/xpacket_fifo_v1_00_b.c | 448 +++++++ board/xilinx/common/xpacket_fifo_v1_00_b.h | 306 +++++ board/xilinx/common/xstatus.h | 347 +++++ board/xilinx/common/xversion.c | 350 +++++ board/xilinx/common/xversion.h | 97 ++ board/xilinx/ml300/Makefile | 57 + board/xilinx/ml300/config.mk | 29 + board/xilinx/ml300/init.S | 48 + board/xilinx/ml300/ml300.c | 109 ++ board/xilinx/ml300/serial.c | 155 +++ .../ml300/sw_services/uboot_v1_00_a/data/Ltypes | 41 + .../uboot_v1_00_a/data/uboot_v2_1_0.mld | 48 + .../uboot_v1_00_a/data/uboot_v2_1_0.tcl | 298 +++++ board/xilinx/ml300/u-boot.lds | 146 +++ board/xilinx/ml300/u-boot.lds.debug | 135 ++ board/xilinx/ml300/xparameters.h | 216 ++++ board/xilinx/xilinx_enet/emac_adapter.c | 153 +++ board/xilinx/xilinx_enet/xemac.c | 844 ++++++++++++ board/xilinx/xilinx_enet/xemac.h | 673 ++++++++++ board/xilinx/xilinx_enet/xemac_g.c | 60 + board/xilinx/xilinx_enet/xemac_i.h | 207 +++ board/xilinx/xilinx_enet/xemac_intr.c | 402 ++++++ board/xilinx/xilinx_enet/xemac_intr_dma.c | 1344 ++++++++++++++++++++ board/xilinx/xilinx_enet/xemac_l.h | 462 +++++++ board/xilinx/xilinx_enet/xemac_options.c | 318 +++++ board/xilinx/xilinx_enet/xemac_polled.c | 482 +++++++ 38 files changed, 11782 insertions(+), 8 deletions(-) create mode 100644 board/xilinx/common/xbasic_types.c create mode 100644 board/xilinx/common/xbasic_types.h create mode 100644 board/xilinx/common/xbuf_descriptor.h create mode 100644 board/xilinx/common/xdma_channel.c create mode 100644 board/xilinx/common/xdma_channel.h create mode 100644 board/xilinx/common/xdma_channel_i.h create mode 100644 board/xilinx/common/xdma_channel_sg.c create mode 100644 board/xilinx/common/xio.h create mode 100644 board/xilinx/common/xipif_v1_23_b.h create mode 100644 board/xilinx/common/xpacket_fifo_v1_00_b.c create mode 100644 board/xilinx/common/xpacket_fifo_v1_00_b.h create mode 100644 board/xilinx/common/xstatus.h create mode 100644 board/xilinx/common/xversion.c create mode 100644 board/xilinx/common/xversion.h create mode 100644 board/xilinx/ml300/Makefile create mode 100644 board/xilinx/ml300/config.mk create mode 100644 board/xilinx/ml300/init.S create mode 100644 board/xilinx/ml300/ml300.c create mode 100644 board/xilinx/ml300/serial.c create mode 100644 board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes create mode 100644 board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld create mode 100644 board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl create mode 100644 board/xilinx/ml300/u-boot.lds create mode 100644 board/xilinx/ml300/u-boot.lds.debug create mode 100644 board/xilinx/ml300/xparameters.h create mode 100644 board/xilinx/xilinx_enet/emac_adapter.c create mode 100644 board/xilinx/xilinx_enet/xemac.c create mode 100644 board/xilinx/xilinx_enet/xemac.h create mode 100644 board/xilinx/xilinx_enet/xemac_g.c create mode 100644 board/xilinx/xilinx_enet/xemac_i.h create mode 100644 board/xilinx/xilinx_enet/xemac_intr.c create mode 100644 board/xilinx/xilinx_enet/xemac_intr_dma.c create mode 100644 board/xilinx/xilinx_enet/xemac_l.h create mode 100644 board/xilinx/xilinx_enet/xemac_options.c create mode 100644 board/xilinx/xilinx_enet/xemac_polled.c (limited to 'board') diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c index 931c0d1b675..84afaaa2b2a 100644 --- a/board/emk/top860/top860.c +++ b/board/emk/top860/top860.c @@ -145,4 +145,3 @@ int misc_init_r (void) return (0); } - diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c index 0f67a0c5904..521eee34c39 100644 --- a/board/omap1610inn/omap1610innovator.c +++ b/board/omap1610inn/omap1610innovator.c @@ -11,7 +11,7 @@ * Kshitij Gupta * * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 - * + * * See file CREDITS for list of people who contributed to this * project. * @@ -112,9 +112,9 @@ void ether__init (void) #ifdef CONFIG_H2_OMAP1610 #define LAN_RESET_REGISTER 0x0400001c - /* The debug board on which the lan chip resides may not be powered - * ON at the same time as the OMAP chip. So wait in a loop until the - * lan reset register (on the debug board) is available (powered on) + /* The debug board on which the lan chip resides may not be powered + * ON at the same time as the OMAP chip. So wait in a loop until the + * lan reset register (on the debug board) is available (powered on) * and reset the lan chip. */ @@ -123,7 +123,7 @@ void ether__init (void) *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001; udelay (3); } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001); - + do { *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000; udelay (3); diff --git a/board/omap1610inn/platform.S b/board/omap1610inn/platform.S index 17756953ead..4d6224cccfa 100644 --- a/board/omap1610inn/platform.S +++ b/board/omap1610inn/platform.S @@ -6,7 +6,7 @@ * Kshitij Gupta * * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 - * + * * See file CREDITS for list of people who contributed to this * project. * @@ -251,7 +251,7 @@ common_tc: ldr r0, REG_TC_EMIFS_CS3_CONFIG str r1, [r0] /* Chip Select 3 */ -#ifdef CONFIG_H2_OMAP1610 +#ifdef CONFIG_H2_OMAP1610 /* inserting additional 2 clock cycle hold time for LAN */ ldr r0, REG_TC_EMIFS_CS1_ADVANCED ldr r1, VAL_TC_EMIFS_CS1_ADVANCED diff --git a/board/xilinx/common/xbasic_types.c b/board/xilinx/common/xbasic_types.c new file mode 100644 index 00000000000..c3a171a356c --- /dev/null +++ b/board/xilinx/common/xbasic_types.c @@ -0,0 +1,165 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* + * +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xbasic_types.c +* +* This file contains basic functions for Xilinx software IP. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who    Date   Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rpm  11/07/03 Added XNullHandler function as a stub interrupt handler
+* 
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Variable Definitions *****************************/ + +/** + * This variable allows testing to be done easier with asserts. An assert + * sets this variable such that a driver can evaluate this variable + * to determine if an assert occurred. + */ +unsigned int XAssertStatus; + +/** + * This variable allows the assert functionality to be changed for testing + * such that it does not wait infinitely. Use the debugger to disable the + * waiting during testing of asserts. + */ +u32 XWaitInAssert = TRUE; + +/* The callback function to be invoked when an assert is taken */ +static XAssertCallback XAssertCallbackRoutine = (XAssertCallback) NULL; + +/************************** Function Prototypes ******************************/ + +/*****************************************************************************/ +/** +* +* Implements assert. Currently, it calls a user-defined callback function +* if one has been set. Then, it potentially enters an infinite loop depending +* on the value of the XWaitInAssert variable. +* +* @param File is the name of the filename of the source +* @param Line is the linenumber within File +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XAssert(char *File, int Line) +{ + /* if the callback has been set then invoke it */ + if (XAssertCallbackRoutine != NULL) { + (*XAssertCallbackRoutine) (File, Line); + } + + /* if specified, wait indefinitely such that the assert will show up + * in testing + */ + while (XWaitInAssert) { + } +} + +/*****************************************************************************/ +/** +* +* Sets up a callback function to be invoked when an assert occurs. If there +* was already a callback installed, then it is replaced. +* +* @param Routine is the callback to be invoked when an assert is taken +* +* @return +* +* None. +* +* @note +* +* This function has no effect if NDEBUG is set +* +******************************************************************************/ +void +XAssertSetCallback(XAssertCallback Routine) +{ + XAssertCallbackRoutine = Routine; +} + +/*****************************************************************************/ +/** +* +* Null handler function. This follows the XInterruptHandler signature for +* interrupt handlers. It can be used to assign a null handler (a stub) to an +* interrupt controller vector table. +* +* @param NullParameter is an arbitrary void pointer and not used. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XNullHandler(void *NullParameter) +{ +} diff --git a/board/xilinx/common/xbasic_types.h b/board/xilinx/common/xbasic_types.h new file mode 100644 index 00000000000..ef0b7c255f7 --- /dev/null +++ b/board/xilinx/common/xbasic_types.h @@ -0,0 +1,283 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xbasic_types.h +* +* This file contains basic types for Xilinx software IP. These types do not +* follow the standard naming convention with respect to using the component +* name in front of each name because they are considered to be primitives. +* +* @note +* +* This file contains items which are architecture dependent. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver	Who    Date   Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rmm  12/14/01 First release
+*	rmm  05/09/03 Added "xassert always" macros to rid ourselves of diab
+*		      compiler warnings
+* 1.00a rpm  11/07/03 Added XNullHandler function as a stub interrupt handler
+* 
+* +******************************************************************************/ + +#ifndef XBASIC_TYPES_H /* prevent circular inclusions */ +#define XBASIC_TYPES_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +/************************** Constant Definitions *****************************/ + +#ifndef TRUE +#define TRUE 1 +#endif +#ifndef FALSE +#define FALSE 0 +#endif + +#ifndef NULL +#define NULL 0 +#endif +/** Null */ + +#define XCOMPONENT_IS_READY 0x11111111 /* component has been initialized */ +#define XCOMPONENT_IS_STARTED 0x22222222 /* component has been started */ + +/* the following constants and declarations are for unit test purposes and are + * designed to be used in test applications. + */ +#define XTEST_PASSED 0 +#define XTEST_FAILED 1 + +#define XASSERT_NONE 0 +#define XASSERT_OCCURRED 1 + +extern unsigned int XAssertStatus; +extern void XAssert(char *, int); + +/**************************** Type Definitions *******************************/ + +/** @name Primitive types + * These primitive types are created for transportability. + * They are dependent upon the target architecture. + * @{ + */ +#include + +typedef struct { + u32 Upper; + u32 Lower; +} Xuint64; + +/*@}*/ + +/** + * This data type defines an interrupt handler for a device. + * The argument points to the instance of the component + */ +typedef void (*XInterruptHandler) (void *InstancePtr); + +/** + * This data type defines a callback to be invoked when an + * assert occurs. The callback is invoked only when asserts are enabled + */ +typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber); + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/** +* Return the most significant half of the 64 bit data type. +* +* @param x is the 64 bit word. +* +* @return +* +* The upper 32 bits of the 64 bit word. +* +* @note +* +* None. +* +******************************************************************************/ +#define XUINT64_MSW(x) ((x).Upper) + +/*****************************************************************************/ +/** +* Return the least significant half of the 64 bit data type. +* +* @param x is the 64 bit word. +* +* @return +* +* The lower 32 bits of the 64 bit word. +* +* @note +* +* None. +* +******************************************************************************/ +#define XUINT64_LSW(x) ((x).Lower) + +#ifndef NDEBUG + +/*****************************************************************************/ +/** +* This assert macro is to be used for functions that do not return anything +* (void). This in conjunction with the XWaitInAssert boolean can be used to +* accomodate tests so that asserts which fail allow execution to continue. +* +* @param expression is the expression to evaluate. If it evaluates to false, +* the assert occurs. +* +* @return +* +* Returns void unless the XWaitInAssert variable is true, in which case +* no return is made and an infinite loop is entered. +* +* @note +* +* None. +* +******************************************************************************/ +#define XASSERT_VOID(expression) \ +{ \ + if (expression) { \ + XAssertStatus = XASSERT_NONE; \ + } else { \ + XAssert(__FILE__, __LINE__); \ + XAssertStatus = XASSERT_OCCURRED; \ + return; \ + } \ +} + +/*****************************************************************************/ +/** +* This assert macro is to be used for functions that do return a value. This in +* conjunction with the XWaitInAssert boolean can be used to accomodate tests so +* that asserts which fail allow execution to continue. +* +* @param expression is the expression to evaluate. If it evaluates to false, +* the assert occurs. +* +* @return +* +* Returns 0 unless the XWaitInAssert variable is true, in which case +* no return is made and an infinite loop is entered. +* +* @note +* +* None. +* +******************************************************************************/ +#define XASSERT_NONVOID(expression) \ +{ \ + if (expression) { \ + XAssertStatus = XASSERT_NONE; \ + } else { \ + XAssert(__FILE__, __LINE__); \ + XAssertStatus = XASSERT_OCCURRED; \ + return 0; \ + } \ +} + +/*****************************************************************************/ +/** +* Always assert. This assert macro is to be used for functions that do not +* return anything (void). Use for instances where an assert should always +* occur. +* +* @return +* +* Returns void unless the XWaitInAssert variable is true, in which case +* no return is made and an infinite loop is entered. +* +* @note +* +* None. +* +******************************************************************************/ +#define XASSERT_VOID_ALWAYS() \ +{ \ + XAssert(__FILE__, __LINE__); \ + XAssertStatus = XASSERT_OCCURRED; \ + return; \ +} + +/*****************************************************************************/ +/** +* Always assert. This assert macro is to be used for functions that do return +* a value. Use for instances where an assert should always occur. +* +* @return +* +* Returns void unless the XWaitInAssert variable is true, in which case +* no return is made and an infinite loop is entered. +* +* @note +* +* None. +* +******************************************************************************/ +#define XASSERT_NONVOID_ALWAYS() \ +{ \ + XAssert(__FILE__, __LINE__); \ + XAssertStatus = XASSERT_OCCURRED; \ + return 0; \ +} + +#else + +#define XASSERT_VOID(expression) +#define XASSERT_VOID_ALWAYS() +#define XASSERT_NONVOID(expression) +#define XASSERT_NONVOID_ALWAYS() +#endif + +/************************** Function Prototypes ******************************/ + +void XAssertSetCallback(XAssertCallback Routine); +void XNullHandler(void *NullParameter); + +#endif /* end of protection macro */ diff --git a/board/xilinx/common/xbuf_descriptor.h b/board/xilinx/common/xbuf_descriptor.h new file mode 100644 index 00000000000..fdd51d58d42 --- /dev/null +++ b/board/xilinx/common/xbuf_descriptor.h @@ -0,0 +1,252 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +* FILENAME: +* +* xbuf_descriptor.h +* +* DESCRIPTION: +* +* This file contains the interface for the XBufDescriptor component. +* The XBufDescriptor component is a passive component that only maps over +* a buffer descriptor data structure shared by the scatter gather DMA hardware +* and software. The component's primary purpose is to provide encapsulation of +* the buffer descriptor processing. See the source file xbuf_descriptor.c for +* details. +* +* NOTES: +* +* Most of the functions of this component are implemented as macros in order +* to optimize the processing. The names are not all uppercase such that they +* can be switched between macros and functions easily. +* +******************************************************************************/ + +#ifndef XBUF_DESCRIPTOR_H /* prevent circular inclusions */ +#define XBUF_DESCRIPTOR_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xdma_channel_i.h" + +/************************** Constant Definitions *****************************/ + +/* The following constants allow access to all fields of a buffer descriptor + * and are necessary at this level of visibility to allow macros to access + * and modify the fields of a buffer descriptor. It is not expected that the + * user of a buffer descriptor would need to use these constants. + */ + +#define XBD_DEVICE_STATUS_OFFSET 0 +#define XBD_CONTROL_OFFSET 1 +#define XBD_SOURCE_OFFSET 2 +#define XBD_DESTINATION_OFFSET 3 +#define XBD_LENGTH_OFFSET 4 +#define XBD_STATUS_OFFSET 5 +#define XBD_NEXT_PTR_OFFSET 6 +#define XBD_ID_OFFSET 7 +#define XBD_FLAGS_OFFSET 8 +#define XBD_RQSTED_LENGTH_OFFSET 9 + +#define XBD_SIZE_IN_WORDS 10 + +/* + * The following constants define the bits of the flags field of a buffer + * descriptor + */ + +#define XBD_FLAGS_LOCKED_MASK 1UL + +/**************************** Type Definitions *******************************/ + +typedef u32 XBufDescriptor[XBD_SIZE_IN_WORDS]; + +/***************** Macros (Inline Functions) Definitions *********************/ + +/* each of the following macros are named the same as functions rather than all + * upper case in order to allow either the macros or the functions to be + * used, see the source file xbuf_descriptor.c for documentation + */ + +#define XBufDescriptor_Initialize(InstancePtr) \ +{ \ + (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_ID_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = 0); \ + (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = 0); \ +} + +#define XBufDescriptor_GetControl(InstancePtr) \ + (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET)) + +#define XBufDescriptor_SetControl(InstancePtr, Control) \ + (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = (u32)Control) + +#define XBufDescriptor_IsLastControl(InstancePtr) \ + (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) & \ + XDC_CONTROL_LAST_BD_MASK) + +#define XBufDescriptor_SetLast(InstancePtr) \ + (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) |= XDC_CONTROL_LAST_BD_MASK) + +#define XBufDescriptor_GetSrcAddress(InstancePtr) \ + ((u32 *)(*((u32 *)InstancePtr + XBD_SOURCE_OFFSET))) + +#define XBufDescriptor_SetSrcAddress(InstancePtr, Source) \ + (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = (u32)Source) + +#define XBufDescriptor_GetDestAddress(InstancePtr) \ + ((u32 *)(*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET))) + +#define XBufDescriptor_SetDestAddress(InstancePtr, Destination) \ + (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = (u32)Destination) + +#define XBufDescriptor_GetLength(InstancePtr) \ + (u32)(*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) - \ + *((u32 *)InstancePtr + XBD_LENGTH_OFFSET)) + +#define XBufDescriptor_SetLength(InstancePtr, Length) \ +{ \ + (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = (u32)(Length)); \ + (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = (u32)(Length));\ +} + +#define XBufDescriptor_GetStatus(InstancePtr) \ + (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET)) + +#define XBufDescriptor_SetStatus(InstancePtr, Status) \ + (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = (u32)Status) + +#define XBufDescriptor_IsLastStatus(InstancePtr) \ + (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET) & \ + XDC_STATUS_LAST_BD_MASK) + +#define XBufDescriptor_GetDeviceStatus(InstancePtr) \ + ((u32)(*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET))) + +#define XBufDescriptor_SetDeviceStatus(InstancePtr, Status) \ + (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = (u32)Status) + +#define XBufDescriptor_GetNextPtr(InstancePtr) \ + (XBufDescriptor *)(*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET)) + +#define XBufDescriptor_SetNextPtr(InstancePtr, NextPtr) \ + (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = (u32)NextPtr) + +#define XBufDescriptor_GetId(InstancePtr) \ + (u32)(*((u32 *)InstancePtr + XBD_ID_OFFSET)) + +#define XBufDescriptor_SetId(InstancePtr, Id) \ + (*((u32 *)InstancePtr + XBD_ID_OFFSET) = (u32)Id) + +#define XBufDescriptor_GetFlags(InstancePtr) \ + (u32)(*((u32 *)InstancePtr + XBD_FLAGS_OFFSET)) + +#define XBufDescriptor_SetFlags(InstancePtr, Flags) \ + (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = (u32)Flags) + +#define XBufDescriptor_Lock(InstancePtr) \ + (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) |= XBD_FLAGS_LOCKED_MASK) + +#define XBufDescriptor_Unlock(InstancePtr) \ + (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) &= ~XBD_FLAGS_LOCKED_MASK) + +#define XBufDescriptor_IsLocked(InstancePtr) \ + (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) & XBD_FLAGS_LOCKED_MASK) + +/************************** Function Prototypes ******************************/ + +/* The following prototypes are provided to allow each of the functions to + * be implemented as a function rather than a macro, and to provide the + * syntax to allow users to understand how to call the macros, they are + * commented out to prevent linker errors + * + +u32 XBufDescriptor_Initialize(XBufDescriptor* InstancePtr); + +u32 XBufDescriptor_GetControl(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetControl(XBufDescriptor* InstancePtr, u32 Control); + +u32 XBufDescriptor_IsLastControl(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetLast(XBufDescriptor* InstancePtr); + +u32 XBufDescriptor_GetLength(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetLength(XBufDescriptor* InstancePtr, u32 Length); + +u32 XBufDescriptor_GetStatus(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetStatus(XBufDescriptor* InstancePtr, u32 Status); +u32 XBufDescriptor_IsLastStatus(XBufDescriptor* InstancePtr); + +u32 XBufDescriptor_GetDeviceStatus(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetDeviceStatus(XBufDescriptor* InstancePtr, + u32 Status); + +u32 XBufDescriptor_GetSrcAddress(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetSrcAddress(XBufDescriptor* InstancePtr, + u32 SourceAddress); + +u32 XBufDescriptor_GetDestAddress(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetDestAddress(XBufDescriptor* InstancePtr, + u32 DestinationAddress); + +XBufDescriptor* XBufDescriptor_GetNextPtr(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetNextPtr(XBufDescriptor* InstancePtr, + XBufDescriptor* NextPtr); + +u32 XBufDescriptor_GetId(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetId(XBufDescriptor* InstancePtr, u32 Id); + +u32 XBufDescriptor_GetFlags(XBufDescriptor* InstancePtr); +void XBufDescriptor_SetFlags(XBufDescriptor* InstancePtr, u32 Flags); + +void XBufDescriptor_Lock(XBufDescriptor* InstancePtr); +void XBufDescriptor_Unlock(XBufDescriptor* InstancePtr); +u32 XBufDescriptor_IsLocked(XBufDescriptor* InstancePtr); + +void XBufDescriptor_Copy(XBufDescriptor* InstancePtr, + XBufDescriptor* DestinationPtr); + +*/ + +#endif /* end of protection macro */ diff --git a/board/xilinx/common/xdma_channel.c b/board/xilinx/common/xdma_channel.c new file mode 100644 index 00000000000..25f1e260287 --- /dev/null +++ b/board/xilinx/common/xdma_channel.c @@ -0,0 +1,738 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +* FILENAME: +* +* xdma_channel.c +* +* DESCRIPTION: +* +* This file contains the DMA channel component. This component supports +* a distributed DMA design in which each device can have it's own dedicated +* DMA channel, as opposed to a centralized DMA design. This component +* performs processing for DMA on all devices. +* +* See xdma_channel.h for more information about this component. +* +* NOTES: +* +* None. +* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xdma_channel.h" +#include "xbasic_types.h" +#include "xio.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_Initialize +* +* DESCRIPTION: +* +* This function initializes a DMA channel. This function must be called +* prior to using a DMA channel. Initialization of a channel includes setting +* up the registers base address, and resetting the channel such that it's in a +* known state. Interrupts for the channel are disabled when the channel is +* reset. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* BaseAddress contains the base address of the registers for the DMA channel. +* +* RETURN VALUE: +* +* XST_SUCCESS indicating initialization was successful. +* +* NOTES: +* +* None. +* +******************************************************************************/ +XStatus +XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress) +{ + /* assert to verify input arguments, don't assert base address */ + + XASSERT_NONVOID(InstancePtr != NULL); + + /* setup the base address of the registers for the DMA channel such + * that register accesses can be done + */ + InstancePtr->RegBaseAddress = BaseAddress; + + /* initialize the scatter gather list such that it indicates it has not + * been created yet and the DMA channel is ready to use (initialized) + */ + InstancePtr->GetPtr = NULL; + InstancePtr->PutPtr = NULL; + InstancePtr->CommitPtr = NULL; + InstancePtr->LastPtr = NULL; + + InstancePtr->TotalDescriptorCount = 0; + InstancePtr->ActiveDescriptorCount = 0; + InstancePtr->IsReady = XCOMPONENT_IS_READY; + + /* initialize the version of the component + */ + XVersion_FromString(&InstancePtr->Version, "1.00a"); + + /* reset the DMA channel such that it's in a known state and ready + * and indicate the initialization occured with no errors, note that + * the is ready variable must be set before this call or reset will assert + */ + XDmaChannel_Reset(InstancePtr); + + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_IsReady +* +* DESCRIPTION: +* +* This function determines if a DMA channel component has been successfully +* initialized such that it's ready to use. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* RETURN VALUE: +* +* TRUE if the DMA channel component is ready, FALSE otherwise. +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_IsReady(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments used by the base component */ + + XASSERT_NONVOID(InstancePtr != NULL); + + return InstancePtr->IsReady == XCOMPONENT_IS_READY; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetVersion +* +* DESCRIPTION: +* +* This function gets the software version for the specified DMA channel +* component. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* RETURN VALUE: +* +* A pointer to the software version of the specified DMA channel. +* +* NOTES: +* +* None. +* +******************************************************************************/ +XVersion * +XDmaChannel_GetVersion(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* return a pointer to the version of the DMA channel */ + + return &InstancePtr->Version; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SelfTest +* +* DESCRIPTION: +* +* This function performs a self test on the specified DMA channel. This self +* test is destructive as the DMA channel is reset and a register default is +* verified. +* +* ARGUMENTS: +* +* InstancePtr is a pointer to the DMA channel to be operated on. +* +* RETURN VALUE: +* +* XST_SUCCESS is returned if the self test is successful, or one of the +* following errors. +* +* XST_DMA_RESET_REGISTER_ERROR Indicates the control register value +* after a reset was not correct +* +* NOTES: +* +* This test does not performs a DMA transfer to test the channel because the +* DMA hardware will not currently allow a non-local memory transfer to non-local +* memory (memory copy), but only allows a non-local memory to or from the device +* memory (typically a FIFO). +* +******************************************************************************/ + +#define XDC_CONTROL_REG_RESET_MASK 0x98000000UL /* control reg reset value */ + +XStatus +XDmaChannel_SelfTest(XDmaChannel * InstancePtr) +{ + u32 ControlReg; + + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* reset the DMA channel such that it's in a known state before the test + * it resets to no interrupts enabled, the desired state for the test + */ + XDmaChannel_Reset(InstancePtr); + + /* this should be the first test to help prevent a lock up with the polling + * loop that occurs later in the test, check the reset value of the DMA + * control register to make sure it's correct, return with an error if not + */ + ControlReg = XDmaChannel_GetControl(InstancePtr); + if (ControlReg != XDC_CONTROL_REG_RESET_MASK) { + return XST_DMA_RESET_REGISTER_ERROR; + } + + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_Reset +* +* DESCRIPTION: +* +* This function resets the DMA channel. This is a destructive operation such +* that it should not be done while a channel is being used. If the DMA channel +* is transferring data into other blocks, such as a FIFO, it may be necessary +* to reset other blocks. This function does not modify the contents of a +* scatter gather list for a DMA channel such that the user is responsible for +* getting buffer descriptors from the list if necessary. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +void +XDmaChannel_Reset(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* reset the DMA channel such that it's in a known state, the reset + * register is self clearing such that it only has to be set + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_RST_REG_OFFSET, + XDC_RESET_MASK); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetControl +* +* DESCRIPTION: +* +* This function gets the control register contents of the DMA channel. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* RETURN VALUE: +* +* The control register contents of the DMA channel. One or more of the +* following values may be contained the register. Each of the values are +* unique bit masks. +* +* XDC_DMACR_SOURCE_INCR_MASK Increment the source address +* XDC_DMACR_DEST_INCR_MASK Increment the destination address +* XDC_DMACR_SOURCE_LOCAL_MASK Local source address +* XDC_DMACR_DEST_LOCAL_MASK Local destination address +* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable +* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt +* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_GetControl(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* return the contents of the DMA control register */ + + return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SetControl +* +* DESCRIPTION: +* +* This function sets the control register of the specified DMA channel. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* Control contains the value to be written to the control register of the DMA +* channel. One or more of the following values may be contained the register. +* Each of the values are unique bit masks such that they may be ORed together +* to enable multiple bits or inverted and ANDed to disable multiple bits. +* +* XDC_DMACR_SOURCE_INCR_MASK Increment the source address +* XDC_DMACR_DEST_INCR_MASK Increment the destination address +* XDC_DMACR_SOURCE_LOCAL_MASK Local source address +* XDC_DMACR_DEST_LOCAL_MASK Local destination address +* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable +* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt +* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +void +XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control) +{ + /* assert to verify input arguments except the control which can't be + * asserted since all values are valid + */ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* set the DMA control register to the specified value */ + + XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetStatus +* +* DESCRIPTION: +* +* This function gets the status register contents of the DMA channel. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* RETURN VALUE: +* +* The status register contents of the DMA channel. One or more of the +* following values may be contained the register. Each of the values are +* unique bit masks. +* +* XDC_DMASR_BUSY_MASK The DMA channel is busy +* XDC_DMASR_BUS_ERROR_MASK A bus error occurred +* XDC_DMASR_BUS_TIMEOUT_MASK A bus timeout occurred +* XDC_DMASR_LAST_BD_MASK The last buffer descriptor of a packet +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_GetStatus(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* return the contents of the DMA status register */ + + return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SetIntrStatus +* +* DESCRIPTION: +* +* This function sets the interrupt status register of the specified DMA channel. +* Setting any bit of the interrupt status register will clear the bit to +* indicate the interrupt processing has been completed. The definitions of each +* bit in the register match the definition of the bits in the interrupt enable +* register. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* Status contains the value to be written to the status register of the DMA +* channel. One or more of the following values may be contained the register. +* Each of the values are unique bit masks such that they may be ORed together +* to enable multiple bits or inverted and ANDed to disable multiple bits. +* +* XDC_IXR_DMA_DONE_MASK The dma operation is done +* XDC_IXR_DMA_ERROR_MASK The dma operation had an error +* XDC_IXR_PKT_DONE_MASK A packet is complete +* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached +* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached +* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed +* XDC_IXR_BD_MASK A buffer descriptor is done +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +void +XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status) +{ + /* assert to verify input arguments except the status which can't be + * asserted since all values are valid + */ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* set the interrupt status register with the specified value such that + * all bits which are set in the register are cleared effectively clearing + * any active interrupts + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetIntrStatus +* +* DESCRIPTION: +* +* This function gets the interrupt status register of the specified DMA channel. +* The interrupt status register indicates which interrupts are active +* for the DMA channel. If an interrupt is active, the status register must be +* set (written) with the bit set for each interrupt which has been processed +* in order to clear the interrupts. The definitions of each bit in the register +* match the definition of the bits in the interrupt enable register. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* RETURN VALUE: +* +* The interrupt status register contents of the specified DMA channel. +* One or more of the following values may be contained the register. +* Each of the values are unique bit masks. +* +* XDC_IXR_DMA_DONE_MASK The dma operation is done +* XDC_IXR_DMA_ERROR_MASK The dma operation had an error +* XDC_IXR_PKT_DONE_MASK A packet is complete +* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached +* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached +* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed +* XDC_IXR_SG_END_MASK Current descriptor was the end of the list +* XDC_IXR_BD_MASK A buffer descriptor is done +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* return the contents of the interrupt status register */ + + return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SetIntrEnable +* +* DESCRIPTION: +* +* This function sets the interrupt enable register of the specified DMA +* channel. The interrupt enable register contains bits which enable +* individual interrupts for the DMA channel. The definitions of each bit +* in the register match the definition of the bits in the interrupt status +* register. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* Enable contains the interrupt enable register contents to be written +* in the DMA channel. One or more of the following values may be contained +* the register. Each of the values are unique bit masks such that they may be +* ORed together to enable multiple bits or inverted and ANDed to disable +* multiple bits. +* +* XDC_IXR_DMA_DONE_MASK The dma operation is done +* XDC_IXR_DMA_ERROR_MASK The dma operation had an error +* XDC_IXR_PKT_DONE_MASK A packet is complete +* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached +* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached +* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed +* XDC_IXR_SG_END_MASK Current descriptor was the end of the list +* XDC_IXR_BD_MASK A buffer descriptor is done +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +void +XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable) +{ + /* assert to verify input arguments except the enable which can't be + * asserted since all values are valid + */ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* set the interrupt enable register to the specified value */ + + XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetIntrEnable +* +* DESCRIPTION: +* +* This function gets the interrupt enable of the DMA channel. The +* interrupt enable contains flags which enable individual interrupts for the +* DMA channel. The definitions of each bit in the register match the definition +* of the bits in the interrupt status register. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* RETURN VALUE: +* +* The interrupt enable of the DMA channel. One or more of the following values +* may be contained the register. Each of the values are unique bit masks. +* +* XDC_IXR_DMA_DONE_MASK The dma operation is done +* XDC_IXR_DMA_ERROR_MASK The dma operation had an error +* XDC_IXR_PKT_DONE_MASK A packet is complete +* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached +* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached +* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed +* XDC_IXR_BD_MASK A buffer descriptor is done +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* return the contents of the interrupt enable register */ + + return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_Transfer +* +* DESCRIPTION: +* +* This function starts the DMA channel transferring data from a memory source +* to a memory destination. This function only starts the operation and returns +* before the operation may be complete. If the interrupt is enabled, an +* interrupt will be generated when the operation is complete, otherwise it is +* necessary to poll the channel status to determine when it's complete. It is +* the responsibility of the caller to determine when the operation is complete +* by handling the generated interrupt or polling the status. It is also the +* responsibility of the caller to ensure that the DMA channel is not busy with +* another transfer before calling this function. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. +* +* SourcePtr contains a pointer to the source memory where the data is to +* be tranferred from and must be 32 bit aligned. +* +* DestinationPtr contains a pointer to the destination memory where the data +* is to be transferred and must be 32 bit aligned. +* +* ByteCount contains the number of bytes to transfer during the DMA operation. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* The DMA h/w will not currently allow a non-local memory transfer to non-local +* memory (memory copy), but only allows a non-local memory to or from the device +* memory (typically a FIFO). +* +* It is the responsibility of the caller to ensure that the cache is +* flushed and invalidated both before and after the DMA operation completes +* if the memory pointed to is cached. The caller must also ensure that the +* pointers contain a physical address rather than a virtual address +* if address translation is being used. +* +******************************************************************************/ +void +XDmaChannel_Transfer(XDmaChannel * InstancePtr, + u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount) +{ + /* assert to verify input arguments and the alignment of any arguments + * which have expected alignments + */ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(SourcePtr != NULL); + XASSERT_VOID(((u32) SourcePtr & 3) == 0); + XASSERT_VOID(DestinationPtr != NULL); + XASSERT_VOID(((u32) DestinationPtr & 3) == 0); + XASSERT_VOID(ByteCount != 0); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* setup the source and destination address registers for the transfer */ + + XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET, + (u32) SourcePtr); + + XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET, + (u32) DestinationPtr); + + /* start the DMA transfer to copy from the source buffer to the + * destination buffer by writing the length to the length register + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount); +} diff --git a/board/xilinx/common/xdma_channel.h b/board/xilinx/common/xdma_channel.h new file mode 100644 index 00000000000..06976c3e045 --- /dev/null +++ b/board/xilinx/common/xdma_channel.h @@ -0,0 +1,291 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +* FILENAME: +* +* xdma_channel.h +* +* DESCRIPTION: +* +* This file contains the DMA channel component implementation. This component +* supports a distributed DMA design in which each device can have it's own +* dedicated DMA channel, as opposed to a centralized DMA design. +* A device which uses DMA typically contains two DMA channels, one for +* sending data and the other for receiving data. +* +* This component is designed to be used as a basic building block for +* designing a device driver. It provides registers accesses such that all +* DMA processing can be maintained easier, but the device driver designer +* must still understand all the details of the DMA channel. +* +* The DMA channel allows a CPU to minimize the CPU interaction required to move +* data between a memory and a device. The CPU requests the DMA channel to +* perform a DMA operation and typically continues performing other processing +* until the DMA operation completes. DMA could be considered a primitive form +* of multiprocessing such that caching and address translation can be an issue. +* +* Scatter Gather Operations +* +* The DMA channel may support scatter gather operations. A scatter gather +* operation automates the DMA channel such that multiple buffers can be +* sent or received with minimal software interaction with the hardware. Buffer +* descriptors, contained in the XBufDescriptor component, are used by the +* scatter gather operations of the DMA channel to describe the buffers to be +* processed. +* +* Scatter Gather List Operations +* +* A scatter gather list may be supported by each DMA channel. The scatter +* gather list allows buffer descriptors to be put into the list by a device +* driver which requires scatter gather. The hardware processes the buffer +* descriptors which are contained in the list and modifies the buffer +* descriptors to reflect the status of the DMA operations. The device driver +* is notified by interrupt that specific DMA events occur including scatter +* gather events. The device driver removes the completed buffer descriptors +* from the scatter gather list to evaluate the status of each DMA operation. +* +* The scatter gather list is created and buffer descriptors are inserted into +* the list. Buffer descriptors are never removed from the list after it's +* creation such that a put operation copies from a temporary buffer descriptor +* to a buffer descriptor in the list. Get operations don't copy from the list +* to a temporary, but return a pointer to the buffer descriptor in the list. +* A buffer descriptor in the list may be locked to prevent it from being +* overwritten by a put operation. This allows the device driver to get a +* descriptor from a scatter gather list and prevent it from being overwritten +* until the buffer associated with the buffer descriptor has been processed. +* +* Typical Scatter Gather Processing +* +* The following steps illustrate the typical processing to use the +* scatter gather features of a DMA channel. +* +* 1. Create a scatter gather list for the DMA channel which puts empty buffer +* descriptors into the list. +* 2. Create buffer descriptors which describe the buffers to be filled with +* receive data or the buffers which contain data to be sent. +* 3. Put buffer descriptors into the DMA channel scatter list such that scatter +* gather operations are requested. +* 4. Commit the buffer descriptors in the list such that they are ready to be +* used by the DMA channel hardware. +* 5. Start the scatter gather operations of the DMA channel. +* 6. Process any interrupts which occur as a result of the scatter gather +* operations or poll the DMA channel to determine the status. +* +* Interrupts +* +* Each DMA channel has the ability to generate an interrupt. This component +* does not perform processing for the interrupt as this processing is typically +* tightly coupled with the device which is using the DMA channel. It is the +* responsibility of the caller of DMA functions to manage the interrupt +* including connecting to the interrupt and enabling/disabling the interrupt. +* +* Critical Sections +* +* It is the responsibility of the device driver designer to use critical +* sections as necessary when calling functions of the DMA channel. This +* component does not use critical sections and it does access registers using +* read-modify-write operations. Calls to DMA functions from a main thread +* and from an interrupt context could produce unpredictable behavior such that +* the caller must provide the appropriate critical sections. +* +* Address Translation +* +* All addresses of data structures which are passed to DMA functions must +* be physical (real) addresses as opposed to logical (virtual) addresses. +* +* Caching +* +* The memory which is passed to the function which creates the scatter gather +* list must not be cached such that buffer descriptors are non-cached. This +* is necessary because the buffer descriptors are kept in a ring buffer and +* not directly accessible to the caller of DMA functions. +* +* The caller of DMA functions is responsible for ensuring that any data +* buffers which are passed to the DMA channel are cache-line aligned if +* necessary. +* +* The caller of DMA functions is responsible for ensuring that any data +* buffers which are passed to the DMA channel have been flushed from the cache. +* +* The caller of DMA functions is responsible for ensuring that the cache is +* invalidated prior to using any data buffers which are the result of a DMA +* operation. +* +* Memory Alignment +* +* The addresses of data buffers which are passed to DMA functions must be +* 32 bit word aligned since the DMA hardware performs 32 bit word transfers. +* +* Mutual Exclusion +* +* The functions of the DMA channel are not thread safe such that the caller +* of all DMA functions is responsible for ensuring mutual exclusion for a +* DMA channel. Mutual exclusion across multiple DMA channels is not +* necessary. +* +* NOTES: +* +* Many of the provided functions which are register accessors don't provide +* a lot of error detection. The caller is expected to understand the impact +* of a function call based upon the current state of the DMA channel. This +* is done to minimize the overhead in this component. +* +******************************************************************************/ + +#ifndef XDMA_CHANNEL_H /* prevent circular inclusions */ +#define XDMA_CHANNEL_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xdma_channel_i.h" /* constants shared with buffer descriptor */ +#include "xbasic_types.h" +#include "xstatus.h" +#include "xversion.h" +#include "xbuf_descriptor.h" + +/************************** Constant Definitions *****************************/ + +/* the following constants provide access to the bit fields of the DMA control + * register (DMACR) + */ +#define XDC_DMACR_SOURCE_INCR_MASK 0x80000000UL /* increment source address */ +#define XDC_DMACR_DEST_INCR_MASK 0x40000000UL /* increment dest address */ +#define XDC_DMACR_SOURCE_LOCAL_MASK 0x20000000UL /* local source address */ +#define XDC_DMACR_DEST_LOCAL_MASK 0x10000000UL /* local dest address */ +#define XDC_DMACR_SG_DISABLE_MASK 0x08000000UL /* scatter gather disable */ +#define XDC_DMACR_GEN_BD_INTR_MASK 0x04000000UL /* descriptor interrupt */ +#define XDC_DMACR_LAST_BD_MASK XDC_CONTROL_LAST_BD_MASK /* last buffer */ + /* descriptor */ + +/* the following constants provide access to the bit fields of the DMA status + * register (DMASR) + */ +#define XDC_DMASR_BUSY_MASK 0x80000000UL /* channel is busy */ +#define XDC_DMASR_BUS_ERROR_MASK 0x40000000UL /* bus error occurred */ +#define XDC_DMASR_BUS_TIMEOUT_MASK 0x20000000UL /* bus timeout occurred */ +#define XDC_DMASR_LAST_BD_MASK XDC_STATUS_LAST_BD_MASK /* last buffer */ + /* descriptor */ +#define XDC_DMASR_SG_BUSY_MASK 0x08000000UL /* scatter gather is busy */ + +/* the following constants provide access to the bit fields of the interrupt + * status register (ISR) and the interrupt enable register (IER), bit masks + * match for both registers such that they are named IXR + */ +#define XDC_IXR_DMA_DONE_MASK 0x1UL /* dma operation done */ +#define XDC_IXR_DMA_ERROR_MASK 0x2UL /* dma operation error */ +#define XDC_IXR_PKT_DONE_MASK 0x4UL /* packet done */ +#define XDC_IXR_PKT_THRESHOLD_MASK 0x8UL /* packet count threshold */ +#define XDC_IXR_PKT_WAIT_BOUND_MASK 0x10UL /* packet wait bound reached */ +#define XDC_IXR_SG_DISABLE_ACK_MASK 0x20UL /* scatter gather disable + acknowledge occurred */ +#define XDC_IXR_SG_END_MASK 0x40UL /* last buffer descriptor + disabled scatter gather */ +#define XDC_IXR_BD_MASK 0x80UL /* buffer descriptor done */ + +/**************************** Type Definitions *******************************/ + +/* + * the following structure contains data which is on a per instance basis + * for the XDmaChannel component + */ +typedef struct XDmaChannelTag { + XVersion Version; /* version of the driver */ + u32 RegBaseAddress; /* base address of registers */ + u32 IsReady; /* device is initialized and ready */ + + XBufDescriptor *PutPtr; /* keep track of where to put into list */ + XBufDescriptor *GetPtr; /* keep track of where to get from list */ + XBufDescriptor *CommitPtr; /* keep track of where to commit in list */ + XBufDescriptor *LastPtr; /* keep track of the last put in the list */ + u32 TotalDescriptorCount; /* total # of descriptors in the list */ + u32 ActiveDescriptorCount; /* # of descriptors pointing to buffers + * in the buffer descriptor list */ +} XDmaChannel; + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +XStatus XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress); +u32 XDmaChannel_IsReady(XDmaChannel * InstancePtr); +XVersion *XDmaChannel_GetVersion(XDmaChannel * InstancePtr); +XStatus XDmaChannel_SelfTest(XDmaChannel * InstancePtr); +void XDmaChannel_Reset(XDmaChannel * InstancePtr); + +/* Control functions */ + +u32 XDmaChannel_GetControl(XDmaChannel * InstancePtr); +void XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control); + +/* Status functions */ + +u32 XDmaChannel_GetStatus(XDmaChannel * InstancePtr); +void XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status); +u32 XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr); +void XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable); +u32 XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr); + +/* DMA without scatter gather functions */ + +void XDmaChannel_Transfer(XDmaChannel * InstancePtr, + u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount); + +/* Scatter gather functions */ + +XStatus XDmaChannel_SgStart(XDmaChannel * InstancePtr); +XStatus XDmaChannel_SgStop(XDmaChannel * InstancePtr, + XBufDescriptor ** BufDescriptorPtr); +XStatus XDmaChannel_CreateSgList(XDmaChannel * InstancePtr, + u32 * MemoryPtr, u32 ByteCount); +u32 XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr); + +XStatus XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr, + XBufDescriptor * BufDescriptorPtr); +XStatus XDmaChannel_CommitPuts(XDmaChannel * InstancePtr); +XStatus XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr, + XBufDescriptor ** BufDescriptorPtr); + +/* Packet functions for interrupt collescing */ + +u32 XDmaChannel_GetPktCount(XDmaChannel * InstancePtr); +void XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr); +XStatus XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold); +u8 XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr); +void XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound); +u32 XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr); + +#endif /* end of protection macro */ diff --git a/board/xilinx/common/xdma_channel_i.h b/board/xilinx/common/xdma_channel_i.h new file mode 100644 index 00000000000..e9f343bbbe6 --- /dev/null +++ b/board/xilinx/common/xdma_channel_i.h @@ -0,0 +1,110 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +* FILENAME: +* +* xdma_channel_i.h +* +* DESCRIPTION: +* +* This file contains data which is shared internal data for the DMA channel +* component. It is also shared with the buffer descriptor component which is +* very tightly coupled with the DMA channel component. +* +* NOTES: +* +* The last buffer descriptor constants must be located here to prevent a +* circular dependency between the DMA channel component and the buffer +* descriptor component. +* +******************************************************************************/ + +#ifndef XDMA_CHANNEL_I_H /* prevent circular inclusions */ +#define XDMA_CHANNEL_I_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xstatus.h" +#include "xversion.h" + +/************************** Constant Definitions *****************************/ + +#define XDC_DMA_CHANNEL_V1_00_A "1.00a" + +/* the following constant provides access to the bit fields of the DMA control + * register (DMACR) which must be shared between the DMA channel component + * and the buffer descriptor component + */ +#define XDC_CONTROL_LAST_BD_MASK 0x02000000UL /* last buffer descriptor */ + +/* the following constant provides access to the bit fields of the DMA status + * register (DMASR) which must be shared between the DMA channel component + * and the buffer descriptor component + */ +#define XDC_STATUS_LAST_BD_MASK 0x10000000UL /* last buffer descriptor */ + +/* the following constants provide access to each of the registers of a DMA + * channel + */ +#define XDC_RST_REG_OFFSET 0 /* reset register */ +#define XDC_MI_REG_OFFSET 0 /* module information register */ +#define XDC_DMAC_REG_OFFSET 4 /* DMA control register */ +#define XDC_SA_REG_OFFSET 8 /* source address register */ +#define XDC_DA_REG_OFFSET 12 /* destination address register */ +#define XDC_LEN_REG_OFFSET 16 /* length register */ +#define XDC_DMAS_REG_OFFSET 20 /* DMA status register */ +#define XDC_BDA_REG_OFFSET 24 /* buffer descriptor address register */ +#define XDC_SWCR_REG_OFFSET 28 /* software control register */ +#define XDC_UPC_REG_OFFSET 32 /* unserviced packet count register */ +#define XDC_PCT_REG_OFFSET 36 /* packet count threshold register */ +#define XDC_PWB_REG_OFFSET 40 /* packet wait bound register */ +#define XDC_IS_REG_OFFSET 44 /* interrupt status register */ +#define XDC_IE_REG_OFFSET 48 /* interrupt enable register */ + +/* the following constant is written to the reset register to reset the + * DMA channel + */ +#define XDC_RESET_MASK 0x0000000AUL + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +#endif /* end of protection macro */ diff --git a/board/xilinx/common/xdma_channel_sg.c b/board/xilinx/common/xdma_channel_sg.c new file mode 100644 index 00000000000..a8e94625bf9 --- /dev/null +++ b/board/xilinx/common/xdma_channel_sg.c @@ -0,0 +1,1317 @@ +/* $Id: xdma_channel_sg.c,v 1.6 2003/02/03 19:50:33 moleres Exp $ */ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +* FILENAME: +* +* xdma_channel_sg.c +* +* DESCRIPTION: +* +* This file contains the implementation of the XDmaChannel component which is +* related to scatter gather operations. +* +* Scatter Gather Operations +* +* The DMA channel may support scatter gather operations. A scatter gather +* operation automates the DMA channel such that multiple buffers can be +* sent or received with minimal software interaction with the hardware. Buffer +* descriptors, contained in the XBufDescriptor component, are used by the +* scatter gather operations of the DMA channel to describe the buffers to be +* processed. +* +* Scatter Gather List Operations +* +* A scatter gather list may be supported by each DMA channel. The scatter +* gather list allows buffer descriptors to be put into the list by a device +* driver which requires scatter gather. The hardware processes the buffer +* descriptors which are contained in the list and modifies the buffer +* descriptors to reflect the status of the DMA operations. The device driver +* is notified by interrupt that specific DMA events occur including scatter +* gather events. The device driver removes the completed buffer descriptors +* from the scatter gather list to evaluate the status of each DMA operation. +* +* The scatter gather list is created and buffer descriptors are inserted into +* the list. Buffer descriptors are never removed from the list after it's +* creation such that a put operation copies from a temporary buffer descriptor +* to a buffer descriptor in the list. Get operations don't copy from the list +* to a temporary, but return a pointer to the buffer descriptor in the list. +* A buffer descriptor in the list may be locked to prevent it from being +* overwritten by a put operation. This allows the device driver to get a +* descriptor from a scatter gather list and prevent it from being overwritten +* until the buffer associated with the buffer descriptor has been processed. +* +* The get and put functions only operate on the list and are asynchronous from +* the hardware which may be using the list of descriptors. This is important +* because there are no checks in the get and put functions to ensure that the +* hardware has processed the descriptors. This must be handled by the driver +* using the DMA scatter gather channel through the use of the other functions. +* When a scatter gather operation is started, the start function does ensure +* that the descriptor to start has not already been processed by the hardware +* and is not the first of a series of descriptors that have not been committed +* yet. +* +* Descriptors are put into the list but not marked as ready to use by the +* hardware until a commit operation is done. This allows multiple descriptors +* which may contain a single packet of information for a protocol to be +* guaranteed not to cause any underflow conditions during transmission. The +* hardware design only allows descriptors to cause it to stop after a descriptor +* has been processed rather than before it is processed. A series of +* descriptors are put into the list followed by a commit operation, or each +* descriptor may be commited. A commit operation is performed by changing a +* single descriptor, the first of the series of puts, to indicate that the +* hardware may now use all descriptors after it. The last descriptor in the +* list is always set to cause the hardware to stop after it is processed. +* +* Typical Scatter Gather Processing +* +* The following steps illustrate the typical processing to use the +* scatter gather features of a DMA channel. +* +* 1. Create a scatter gather list for the DMA channel which puts empty buffer +* descriptors into the list. +* 2. Create buffer descriptors which describe the buffers to be filled with +* receive data or the buffers which contain data to be sent. +* 3. Put buffer descriptors into the DMA channel scatter list such that scatter +* gather operations are requested. +* 4. Commit the buffer descriptors in the list such that they are ready to be +* used by the DMA channel hardware. +* 5. Start the scatter gather operations of the DMA channel. +* 6. Process any interrupts which occur as a result of the scatter gather +* operations or poll the DMA channel to determine the status. This may +* be accomplished by getting the packet count for the channel and then +* getting the appropriate number of descriptors from the list for that +* number of packets. +* +* Minimizing Interrupts +* +* The Scatter Gather operating mode is designed to reduce the amount of CPU +* throughput necessary to manage the hardware for devices. A key to the CPU +* throughput is the number and rate of interrupts that the CPU must service. +* Devices with higher data rates can cause larger numbers of interrupts and +* higher frequency interrupts. Ideally the number of interrupts can be reduced +* by only generating an interrupt when a specific amount of data has been +* received from the interface. This design suffers from a lack of interrupts +* when the amount of data received is less than the specified amount of data +* to generate an interrupt. In order to help minimize the number of interrupts +* which the CPU must service, an algorithm referred to as "interrupt coalescing" +* is utilized. +* +* Interrupt Coalescing +* +* The principle of interrupt coalescing is to wait before generating an +* interrupt until a certain number of packets have been received or sent. An +* interrupt is also generated if a smaller number of packets have been received +* followed by a certain period of time with no packet reception. This is a +* trade-off of latency for bandwidth and is accomplished using several +* mechanisms of the hardware including a counter for packets received or +* transmitted and a packet timer. These two hardware mechanisms work in +* combination to allow a reduction in the number of interrupts processed by the +* CPU for packet reception. +* +* Unserviced Packet Count +* +* The purpose of the packet counter is to count the number of packets received +* or transmitted and provide an interrupt when a specific number of packets +* have been processed by the hardware. An interrupt is generated whenever the +* counter is greater than or equal to the Packet Count Threshold. This counter +* contains an accurate count of the number of packets that the hardware has +* processed, either received or transmitted, and the software has not serviced. +* +* The packet counter allows the number of interrupts to be reduced by waiting +* to generate an interrupt until enough packets are received. For packet +* reception, packet counts of less than the number to generate an interrupt +* would not be serviced without the addition of a packet timer. This counter is +* continuously updated by the hardware, not latched to the value at the time +* the interrupt occurred. +* +* The packet counter can be used within the interrupt service routine for the +* device to reduce the number of interrupts. The interrupt service routine +* loops while performing processing for each packet which has been received or +* transmitted and decrements the counter by a specified value. At the same time, +* the hardware is possibly continuing to receive or transmit more packets such +* that the software may choose, based upon the value in the packet counter, to +* remain in the interrupt service routine rather than exiting and immediately +* returning. This feature should be used with caution as reducing the number of +* interrupts is beneficial, but unbounded interrupt processing is not desirable. +* +* Since the hardware may be incrementing the packet counter simultaneously +* with the software decrementing the counter, there is a need for atomic +* operations. The hardware ensures that the operation is atomic such that +* simultaneous accesses are properly handled. +* +* Packet Wait Bound +* +* The purpose of the packet wait bound is to augment the unserviced packet +* count. Whenever there is no pending interrupt for the channel and the +* unserviced packet count is non-zero, a timer starts counting timeout at the +* value contained the the packet wait bound register. If the timeout is +* reached, an interrupt is generated such that the software may service the +* data which was buffered. +* +* NOTES: +* +* Special Test Conditions: +* +* The scatter gather list processing must be thoroughly tested if changes are +* made. Testing should include putting and committing single descriptors and +* putting multiple descriptors followed by a single commit. There are some +* conditions in the code which handle the exception conditions. +* +* The Put Pointer points to the next location in the descriptor list to copy +* in a new descriptor. The Get Pointer points to the next location in the +* list to get a descriptor from. The Get Pointer only allows software to +* have a traverse the list after the hardware has finished processing some +* number of descriptors. The Commit Pointer points to the descriptor in the +* list which is to be committed. It is also used to determine that no +* descriptor is waiting to be commited (NULL). The Last Pointer points to +* the last descriptor that was put into the list. It typically points +* to the previous descriptor to the one pointed to by the Put Pointer. +* Comparisons are done between these pointers to determine when the following +* special conditions exist. + +* Single Put And Commit +* +* The buffer descriptor is ready to be used by the hardware so it is important +* for the descriptor to not appear to be waiting to be committed. The commit +* pointer is reset when a commit is done indicating there are no descriptors +* waiting to be committed. In all cases but this one, the descriptor is +* changed to cause the hardware to go to the next descriptor after processing +* this one. But in this case, this is the last descriptor in the list such +* that it must not be changed. +* +* 3 Or More Puts And Commit +* +* A series of 3 or more puts followed by a single commit is different in that +* only the 1st descriptor put into the list is changed when the commit is done. +* This requires each put starting on the 3rd to change the previous descriptor +* so that it allows the hardware to continue to the next descriptor in the list. +* +* The 1st Put Following A Commit +* +* The commit caused the commit pointer to be NULL indicating that there are no +* descriptors waiting to be committed. It is necessary for the next put to set +* the commit pointer so that a commit must follow the put for the hardware to +* use the descriptor. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver	Who  Date     Changes
+* ----- ---- -------- ------------------------------------------------------
+* 1.00a rpm  02/03/03 Removed the XST_DMA_SG_COUNT_EXCEEDED return code
+*		      from SetPktThreshold.
+* 
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xdma_channel.h" +#include "xbasic_types.h" +#include "xio.h" +#include "xbuf_descriptor.h" +#include "xstatus.h" + +/************************** Constant Definitions *****************************/ + +#define XDC_SWCR_SG_ENABLE_MASK 0x80000000UL /* scatter gather enable */ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/* the following macro copies selected fields of a buffer descriptor to another + * buffer descriptor, this was provided by the buffer descriptor component but + * was moved here since it is only used internally to this component and since + * it does not copy all fields + */ +#define CopyBufferDescriptor(InstancePtr, DestinationPtr) \ +{ \ + *((u32 *)DestinationPtr + XBD_CONTROL_OFFSET) = \ + *((u32 *)InstancePtr + XBD_CONTROL_OFFSET); \ + *((u32 *)DestinationPtr + XBD_SOURCE_OFFSET) = \ + *((u32 *)InstancePtr + XBD_SOURCE_OFFSET); \ + *((u32 *)DestinationPtr + XBD_DESTINATION_OFFSET) = \ + *((u32 *)InstancePtr + XBD_DESTINATION_OFFSET); \ + *((u32 *)DestinationPtr + XBD_LENGTH_OFFSET) = \ + *((u32 *)InstancePtr + XBD_LENGTH_OFFSET); \ + *((u32 *)DestinationPtr + XBD_STATUS_OFFSET) = \ + *((u32 *)InstancePtr + XBD_STATUS_OFFSET); \ + *((u32 *)DestinationPtr + XBD_DEVICE_STATUS_OFFSET) = \ + *((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET); \ + *((u32 *)DestinationPtr + XBD_ID_OFFSET) = \ + *((u32 *)InstancePtr + XBD_ID_OFFSET); \ + *((u32 *)DestinationPtr + XBD_FLAGS_OFFSET) = \ + *((u32 *)InstancePtr + XBD_FLAGS_OFFSET); \ + *((u32 *)DestinationPtr + XBD_RQSTED_LENGTH_OFFSET) = \ + *((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET); \ +} + +/************************** Variable Definitions *****************************/ + +/************************** Function Prototypes ******************************/ + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SgStart +* +* DESCRIPTION: +* +* This function starts a scatter gather operation for a scatter gather +* DMA channel. The first buffer descriptor in the buffer descriptor list +* will be started with the scatter gather operation. A scatter gather list +* should have previously been created for the DMA channel and buffer +* descriptors put into the scatter gather list such that there are scatter +* operations ready to be performed. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* RETURN VALUE: +* +* A status containing XST_SUCCESS if scatter gather was started successfully +* for the DMA channel. +* +* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not +* been created. +* +* A value of XST_DMA_SG_LIST_EMPTY indicates scatter gather was not started +* because the scatter gather list of the DMA channel does not contain any +* buffer descriptors that are ready to be processed by the hardware. +* +* A value of XST_DMA_SG_IS_STARTED indicates scatter gather was not started +* because the scatter gather was not stopped, but was already started. +* +* A value of XST_DMA_SG_BD_NOT_COMMITTED indicates the buffer descriptor of +* scatter gather list which was to be started is not committed to the list. +* This status is more likely if this function is being called from an ISR +* and non-ISR processing is putting descriptors into the list. +* +* A value of XST_DMA_SG_NO_DATA indicates that the buffer descriptor of the +* scatter gather list which was to be started had already been used by the +* hardware for a DMA transfer that has been completed. +* +* NOTES: +* +* It is the responsibility of the caller to get all the buffer descriptors +* after performing a stop operation and before performing a start operation. +* If buffer descriptors are not retrieved between stop and start operations, +* buffer descriptors may be processed by the hardware more than once. +* +******************************************************************************/ +XStatus +XDmaChannel_SgStart(XDmaChannel * InstancePtr) +{ + u32 Register; + XBufDescriptor *LastDescriptorPtr; + + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* if a scatter gather list has not been created yet, return a status */ + + if (InstancePtr->TotalDescriptorCount == 0) { + return XST_DMA_SG_NO_LIST; + } + + /* if the scatter gather list exists but is empty then return a status */ + + if (XDmaChannel_IsSgListEmpty(InstancePtr)) { + return XST_DMA_SG_LIST_EMPTY; + } + + /* if scatter gather is busy for the DMA channel, return a status because + * restarting it could lose data + */ + + Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET); + if (Register & XDC_DMASR_SG_BUSY_MASK) { + return XST_DMA_SG_IS_STARTED; + } + + /* get the address of the last buffer descriptor which the DMA hardware + * finished processing + */ + LastDescriptorPtr = + (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress + + XDC_BDA_REG_OFFSET); + + /* setup the first buffer descriptor that will be sent when the scatter + * gather channel is enabled, this is only necessary one time since + * the BDA register of the channel maintains the last buffer descriptor + * processed + */ + if (LastDescriptorPtr == NULL) { + XIo_Out32(InstancePtr->RegBaseAddress + XDC_BDA_REG_OFFSET, + (u32) InstancePtr->GetPtr); + } else { + XBufDescriptor *NextDescriptorPtr; + + /* get the next descriptor to be started, if the status indicates it + * hasn't already been used by the h/w, then it's OK to start it, + * s/w sets the status of each descriptor to busy and then h/w clears + * the busy when it is complete + */ + NextDescriptorPtr = + XBufDescriptor_GetNextPtr(LastDescriptorPtr); + + if ((XBufDescriptor_GetStatus(NextDescriptorPtr) & + XDC_DMASR_BUSY_MASK) == 0) { + return XST_DMA_SG_NO_DATA; + } + /* don't start the DMA SG channel if the descriptor to be processed + * by h/w is to be committed by the s/w, this function can be called + * such that it interrupts a thread that was putting into the list + */ + if (NextDescriptorPtr == InstancePtr->CommitPtr) { + return XST_DMA_SG_BD_NOT_COMMITTED; + } + } + + /* start the scatter gather operation by clearing the stop bit in the + * control register and setting the enable bit in the s/w control register, + * both of these are necessary to cause it to start, right now the order of + * these statements is important, the software control register should be + * set 1st. The other order can cause the CPU to have a loss of sync + * because it cannot read/write the register while the DMA operation is + * running + */ + + Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET); + + XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET, + Register | XDC_SWCR_SG_ENABLE_MASK); + + Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET); + + XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, + Register & ~XDC_DMACR_SG_DISABLE_MASK); + + /* indicate the DMA channel scatter gather operation was started + * successfully + */ + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SgStop +* +* DESCRIPTION: +* +* This function stops a scatter gather operation for a scatter gather +* DMA channel. This function starts the process of stopping a scatter +* gather operation that is in progress and waits for the stop to be completed. +* Since it waits for the operation to stopped before returning, this function +* could take an amount of time relative to the size of the DMA scatter gather +* operation which is in progress. The scatter gather list of the DMA channel +* is not modified by this function such that starting the scatter gather +* channel after stopping it will cause it to resume. This operation is +* considered to be a graceful stop in that the scatter gather operation +* completes the current buffer descriptor before stopping. +* +* If the interrupt is enabled, an interrupt will be generated when the +* operation is stopped and the caller is responsible for handling the +* interrupt. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* BufDescriptorPtr is also a return value which contains a pointer to the +* buffer descriptor which the scatter gather operation completed when it +* was stopped. +* +* RETURN VALUE: +* +* A status containing XST_SUCCESS if scatter gather was stopped successfully +* for the DMA channel. +* +* A value of XST_DMA_SG_IS_STOPPED indicates scatter gather was not stoppped +* because the scatter gather is not started, but was already stopped. +* +* BufDescriptorPtr contains a pointer to the buffer descriptor which was +* completed when the operation was stopped. +* +* NOTES: +* +* This function implements a loop which polls the hardware for an infinite +* amount of time. If the hardware is not operating correctly, this function +* may never return. +* +******************************************************************************/ +XStatus +XDmaChannel_SgStop(XDmaChannel * InstancePtr, + XBufDescriptor ** BufDescriptorPtr) +{ + u32 Register; + + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BufDescriptorPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* get the contents of the software control register, if scatter gather is not + * enabled (started), then return a status because the disable acknowledge + * would not be generated + */ + Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET); + + if ((Register & XDC_SWCR_SG_ENABLE_MASK) == 0) { + return XST_DMA_SG_IS_STOPPED; + } + + /* Ensure the interrupt status for the scatter gather is cleared such + * that this function will wait til the disable has occurred, writing + * a 1 to only that bit in the register will clear only it + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, + XDC_IXR_SG_DISABLE_ACK_MASK); + + /* disable scatter gather by writing to the software control register + * without modifying any other bits of the register + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET, + Register & ~XDC_SWCR_SG_ENABLE_MASK); + + /* scatter gather does not disable immediately, but after the current + * buffer descriptor is complete, so wait for the DMA channel to indicate + * the disable is complete + */ + do { + Register = + XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET); + } while ((Register & XDC_IXR_SG_DISABLE_ACK_MASK) == 0); + + /* Ensure the interrupt status for the scatter gather disable is cleared, + * writing a 1 to only that bit in the register will clear only it + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, + XDC_IXR_SG_DISABLE_ACK_MASK); + + /* set the specified buffer descriptor pointer to point to the buffer + * descriptor that the scatter gather DMA channel was processing + */ + *BufDescriptorPtr = + (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress + + XDC_BDA_REG_OFFSET); + + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_CreateSgList +* +* DESCRIPTION: +* +* This function creates a scatter gather list in the DMA channel. A scatter +* gather list consists of a list of buffer descriptors that are available to +* be used for scatter gather operations. Buffer descriptors are put into the +* list to request a scatter gather operation to be performed. +* +* A number of buffer descriptors are created from the specified memory and put +* into a buffer descriptor list as empty buffer descriptors. This function must +* be called before non-empty buffer descriptors may be put into the DMA channel +* to request scatter gather operations. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* MemoryPtr contains a pointer to the memory which is to be used for buffer +* descriptors and must not be cached. +* +* ByteCount contains the number of bytes for the specified memory to be used +* for buffer descriptors. +* +* RETURN VALUE: +* +* A status contains XST_SUCCESS if the scatter gather list was successfully +* created. +* +* A value of XST_DMA_SG_LIST_EXISTS indicates that the scatter gather list +* was not created because the list has already been created. +* +* NOTES: +* +* None. +* +******************************************************************************/ +XStatus +XDmaChannel_CreateSgList(XDmaChannel * InstancePtr, + u32 * MemoryPtr, u32 ByteCount) +{ + XBufDescriptor *BufferDescriptorPtr = (XBufDescriptor *) MemoryPtr; + XBufDescriptor *PreviousDescriptorPtr = NULL; + XBufDescriptor *StartOfListPtr = BufferDescriptorPtr; + u32 UsedByteCount; + + /* assert to verify valid input arguments, alignment for those + * arguments that have alignment restrictions, and at least enough + * memory for one buffer descriptor + */ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(MemoryPtr != NULL); + XASSERT_NONVOID(((u32) MemoryPtr & 3) == 0); + XASSERT_NONVOID(ByteCount != 0); + XASSERT_NONVOID(ByteCount >= sizeof (XBufDescriptor)); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* if the scatter gather list has already been created, then return + * with a status + */ + if (InstancePtr->TotalDescriptorCount != 0) { + return XST_DMA_SG_LIST_EXISTS; + } + + /* loop thru the specified memory block and create as many buffer + * descriptors as possible putting each into the list which is + * implemented as a ring buffer, make sure not to use any memory which + * is not large enough for a complete buffer descriptor + */ + UsedByteCount = 0; + while ((UsedByteCount + sizeof (XBufDescriptor)) <= ByteCount) { + /* setup a pointer to the next buffer descriptor in the memory and + * update # of used bytes to know when all of memory is used + */ + BufferDescriptorPtr = (XBufDescriptor *) ((u32) MemoryPtr + + UsedByteCount); + + /* initialize the new buffer descriptor such that it doesn't contain + * garbage which could be used by the DMA hardware + */ + XBufDescriptor_Initialize(BufferDescriptorPtr); + + /* if this is not the first buffer descriptor to be created, + * then link it to the last created buffer descriptor + */ + if (PreviousDescriptorPtr != NULL) { + XBufDescriptor_SetNextPtr(PreviousDescriptorPtr, + BufferDescriptorPtr); + } + + /* always keep a pointer to the last created buffer descriptor such + * that they can be linked together in the ring buffer + */ + PreviousDescriptorPtr = BufferDescriptorPtr; + + /* keep a count of the number of descriptors in the list to allow + * error processing to be performed + */ + InstancePtr->TotalDescriptorCount++; + + UsedByteCount += sizeof (XBufDescriptor); + } + + /* connect the last buffer descriptor created and inserted in the list + * to the first such that a ring buffer is created + */ + XBufDescriptor_SetNextPtr(BufferDescriptorPtr, StartOfListPtr); + + /* initialize the ring buffer to indicate that there are no + * buffer descriptors in the list which point to valid data buffers + */ + InstancePtr->PutPtr = BufferDescriptorPtr; + InstancePtr->GetPtr = BufferDescriptorPtr; + InstancePtr->CommitPtr = NULL; + InstancePtr->LastPtr = BufferDescriptorPtr; + InstancePtr->ActiveDescriptorCount = 0; + + /* indicate the scatter gather list was successfully created */ + + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_IsSgListEmpty +* +* DESCRIPTION: +* +* This function determines if the scatter gather list of a DMA channel is +* empty with regard to buffer descriptors which are pointing to buffers to be +* used for scatter gather operations. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* RETURN VALUE: +* +* A value of TRUE if the scatter gather list is empty, otherwise a value of +* FALSE. +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr) +{ + /* assert to verify valid input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* if the number of descriptors which are being used in the list is zero + * then the list is empty + */ + return (InstancePtr->ActiveDescriptorCount == 0); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_PutDescriptor +* +* DESCRIPTION: +* +* This function puts a buffer descriptor into the DMA channel scatter +* gather list. A DMA channel maintains a list of buffer descriptors which are +* to be processed. This function puts the specified buffer descriptor +* at the next location in the list. Note that since the list is already intact, +* the information in the parameter is copied into the list (rather than modify +* list pointers on the fly). +* +* After buffer descriptors are put into the list, they must also be committed +* by calling another function. This allows multiple buffer descriptors which +* span a single packet to be put into the list while preventing the hardware +* from starting the first buffer descriptor of the packet. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* BufferDescriptorPtr is a pointer to the buffer descriptor to be put into +* the next available location of the scatter gather list. +* +* RETURN VALUE: +* +* A status which indicates XST_SUCCESS if the buffer descriptor was +* successfully put into the scatter gather list. +* +* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not +* been created. +* +* A value of XST_DMA_SG_LIST_FULL indicates the buffer descriptor was not +* put into the list because the list was full. +* +* A value of XST_DMA_SG_BD_LOCKED indicates the buffer descriptor was not +* put into the list because the buffer descriptor in the list which is to +* be overwritten was locked. A locked buffer descriptor indicates the higher +* layered software is still using the buffer descriptor. +* +* NOTES: +* +* It is necessary to create a scatter gather list for a DMA channel before +* putting buffer descriptors into it. +* +******************************************************************************/ +XStatus +XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr, + XBufDescriptor * BufferDescriptorPtr) +{ + u32 Control; + + /* assert to verify valid input arguments and alignment for those + * arguments that have alignment restrictions + */ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BufferDescriptorPtr != NULL); + XASSERT_NONVOID(((u32) BufferDescriptorPtr & 3) == 0); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* if a scatter gather list has not been created yet, return a status */ + + if (InstancePtr->TotalDescriptorCount == 0) { + return XST_DMA_SG_NO_LIST; + } + + /* if the list is full because all descriptors are pointing to valid + * buffers, then indicate an error, this code assumes no list or an + * empty list is detected above + */ + if (InstancePtr->ActiveDescriptorCount == + InstancePtr->TotalDescriptorCount) { + return XST_DMA_SG_LIST_FULL; + } + + /* if the buffer descriptor in the list which is to be overwritten is + * locked, then don't overwrite it and return a status + */ + if (XBufDescriptor_IsLocked(InstancePtr->PutPtr)) { + return XST_DMA_SG_BD_LOCKED; + } + + /* set the scatter gather stop bit in the control word of the descriptor + * to cause the h/w to stop after it processes this descriptor since it + * will be the last in the list + */ + Control = XBufDescriptor_GetControl(BufferDescriptorPtr); + XBufDescriptor_SetControl(BufferDescriptorPtr, + Control | XDC_DMACR_SG_DISABLE_MASK); + + /* set both statuses in the descriptor so we tell if they are updated with + * the status of the transfer, the hardware should change the busy in the + * DMA status to be false when it completes + */ + XBufDescriptor_SetStatus(BufferDescriptorPtr, XDC_DMASR_BUSY_MASK); + XBufDescriptor_SetDeviceStatus(BufferDescriptorPtr, 0); + + /* copy the descriptor into the next position in the list so it's ready to + * be used by the h/w, this assumes the descriptor in the list prior to this + * one still has the stop bit in the control word set such that the h/w + * use this one yet + */ + CopyBufferDescriptor(BufferDescriptorPtr, InstancePtr->PutPtr); + + /* only the last in the list and the one to be committed have scatter gather + * disabled in the control word, a commit requires only one descriptor + * to be changed, when # of descriptors to commit > 2 all others except the + * 1st and last have scatter gather enabled + */ + if ((InstancePtr->CommitPtr != InstancePtr->LastPtr) && + (InstancePtr->CommitPtr != NULL)) { + Control = XBufDescriptor_GetControl(InstancePtr->LastPtr); + XBufDescriptor_SetControl(InstancePtr->LastPtr, + Control & ~XDC_DMACR_SG_DISABLE_MASK); + } + + /* update the list data based upon putting a descriptor into the list, + * these operations must be last + */ + InstancePtr->ActiveDescriptorCount++; + + /* only update the commit pointer if it is not already active, this allows + * it to be deactivated after every commit such that a single descriptor + * which is committed does not appear to be waiting to be committed + */ + if (InstancePtr->CommitPtr == NULL) { + InstancePtr->CommitPtr = InstancePtr->LastPtr; + } + + /* these updates MUST BE LAST after the commit pointer update in order for + * the commit pointer to track the correct descriptor to be committed + */ + InstancePtr->LastPtr = InstancePtr->PutPtr; + InstancePtr->PutPtr = XBufDescriptor_GetNextPtr(InstancePtr->PutPtr); + + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_CommitPuts +* +* DESCRIPTION: +* +* This function commits the buffer descriptors which have been put into the +* scatter list for the DMA channel since the last commit operation was +* performed. This enables the calling functions to put several buffer +* descriptors into the list (e.g.,a packet's worth) before allowing the scatter +* gather operations to start. This prevents the DMA channel hardware from +* starting to use the buffer descriptors in the list before they are ready +* to be used (multiple buffer descriptors for a single packet). +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* RETURN VALUE: +* +* A status indicating XST_SUCCESS if the buffer descriptors of the list were +* successfully committed. +* +* A value of XST_DMA_SG_NOTHING_TO_COMMIT indicates that the buffer descriptors +* were not committed because there was nothing to commit in the list. All the +* buffer descriptors which are in the list are commited. +* +* NOTES: +* +* None. +* +******************************************************************************/ +XStatus +XDmaChannel_CommitPuts(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* if the buffer descriptor to be committed is already committed or + * the list is empty (none have been put in), then indicate an error + */ + if ((InstancePtr->CommitPtr == NULL) || + XDmaChannel_IsSgListEmpty(InstancePtr)) { + return XST_DMA_SG_NOTHING_TO_COMMIT; + } + + /* last descriptor in the list must have scatter gather disabled so the end + * of the list is hit by h/w, if descriptor to commit is not last in list, + * commit descriptors by enabling scatter gather in the descriptor + */ + if (InstancePtr->CommitPtr != InstancePtr->LastPtr) { + u32 Control; + + Control = XBufDescriptor_GetControl(InstancePtr->CommitPtr); + XBufDescriptor_SetControl(InstancePtr->CommitPtr, Control & + ~XDC_DMACR_SG_DISABLE_MASK); + } + /* Update the commit pointer to indicate that there is nothing to be + * committed, this state is used by start processing to know that the + * buffer descriptor to start is not waiting to be committed + */ + InstancePtr->CommitPtr = NULL; + + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetDescriptor +* +* DESCRIPTION: +* +* This function gets a buffer descriptor from the scatter gather list of the +* DMA channel. The buffer descriptor is retrieved from the scatter gather list +* and the scatter gather list is updated to not include the retrieved buffer +* descriptor. This is typically done after a scatter gather operation +* completes indicating that a data buffer has been successfully sent or data +* has been received into the data buffer. The purpose of this function is to +* allow the device using the scatter gather operation to get the results of the +* operation. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* BufDescriptorPtr is a pointer to a pointer to the buffer descriptor which +* was retrieved from the list. The buffer descriptor is not really removed +* from the list, but it is changed to a state such that the hardware will not +* use it again until it is put into the scatter gather list of the DMA channel. +* +* RETURN VALUE: +* +* A status indicating XST_SUCCESS if a buffer descriptor was retrieved from +* the scatter gather list of the DMA channel. +* +* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not +* been created. +* +* A value of XST_DMA_SG_LIST_EMPTY indicates no buffer descriptor was +* retrieved from the list because there are no buffer descriptors to be +* processed in the list. +* +* BufDescriptorPtr is updated to point to the buffer descriptor which was +* retrieved from the list if the status indicates success. +* +* NOTES: +* +* None. +* +******************************************************************************/ +XStatus +XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr, + XBufDescriptor ** BufDescriptorPtr) +{ + u32 Control; + + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BufDescriptorPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* if a scatter gather list has not been created yet, return a status */ + + if (InstancePtr->TotalDescriptorCount == 0) { + return XST_DMA_SG_NO_LIST; + } + + /* if the buffer descriptor list is empty, then indicate an error */ + + if (XDmaChannel_IsSgListEmpty(InstancePtr)) { + return XST_DMA_SG_LIST_EMPTY; + } + + /* retrieve the next buffer descriptor which is ready to be processed from + * the buffer descriptor list for the DMA channel, set the control word + * such that hardware will stop after the descriptor has been processed + */ + Control = XBufDescriptor_GetControl(InstancePtr->GetPtr); + XBufDescriptor_SetControl(InstancePtr->GetPtr, + Control | XDC_DMACR_SG_DISABLE_MASK); + + /* set the input argument, which is also an output, to point to the + * buffer descriptor which is to be retrieved from the list + */ + *BufDescriptorPtr = InstancePtr->GetPtr; + + /* update the pointer of the DMA channel to reflect the buffer descriptor + * was retrieved from the list by setting it to the next buffer descriptor + * in the list and indicate one less descriptor in the list now + */ + InstancePtr->GetPtr = XBufDescriptor_GetNextPtr(InstancePtr->GetPtr); + InstancePtr->ActiveDescriptorCount--; + + return XST_SUCCESS; +} + +/*********************** Interrupt Collescing Functions **********************/ + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetPktCount +* +* DESCRIPTION: +* +* This function returns the value of the unserviced packet count register of +* the DMA channel. This count represents the number of packets that have been +* sent or received by the hardware, but not processed by software. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* RETURN VALUE: +* +* The unserviced packet counter register contents for the DMA channel. +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_GetPktCount(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* get the unserviced packet count from the register and return it */ + + return XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_DecrementPktCount +* +* DESCRIPTION: +* +* This function decrements the value of the unserviced packet count register. +* This informs the hardware that the software has processed a packet. The +* unserviced packet count register may only be decremented by one in the +* hardware. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +void +XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr) +{ + u32 Register; + + /* assert to verify input arguments */ + + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* if the unserviced packet count register can be decremented (rather + * than rolling over) decrement it by writing a 1 to the register, + * this is the only valid write to the register as it serves as an + * acknowledge that a packet was handled by the software + */ + Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET); + if (Register > 0) { + XIo_Out32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET, + 1UL); + } +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SetPktThreshold +* +* DESCRIPTION: +* +* This function sets the value of the packet count threshold register of the +* DMA channel. It reflects the number of packets that must be sent or +* received before generating an interrupt. This value helps implement +* a concept called "interrupt coalescing", which is used to reduce the number +* of interrupts from devices with high data rates. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* Threshold is the value that is written to the threshold register of the +* DMA channel. +* +* RETURN VALUE: +* +* A status containing XST_SUCCESS if the packet count threshold was +* successfully set. +* +* NOTES: +* +* The packet threshold could be set to larger than the number of descriptors +* allocated to the DMA channel. In this case, the wait bound will take over +* and always indicate data arrival. There was a check in this function that +* returned an error if the treshold was larger than the number of descriptors, +* but that was removed because users would then have to set the threshold +* only after they set descriptor space, which is an order dependency that +* caused confustion. +* +******************************************************************************/ +XStatus +XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold) +{ + /* assert to verify input arguments, don't assert the threshold since + * it's range is unknown + */ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* set the packet count threshold in the register such that an interrupt + * may be generated, if enabled, when the packet count threshold is + * reached or exceeded + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET, + (u32) Threshold); + + /* indicate the packet count threshold was successfully set */ + + return XST_SUCCESS; +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetPktThreshold +* +* DESCRIPTION: +* +* This function gets the value of the packet count threshold register of the +* DMA channel. This value reflects the number of packets that must be sent or +* received before generating an interrupt. This value helps implement a concept +* called "interrupt coalescing", which is used to reduce the number of +* interrupts from devices with high data rates. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* RETURN VALUE: +* +* The packet threshold register contents for the DMA channel and is a value in +* the range 0 - 1023. A value of 0 indicates the packet wait bound timer is +* disabled. +* +* NOTES: +* +* None. +* +******************************************************************************/ +u8 +XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* get the packet count threshold from the register and return it, + * since only 8 bits are used, cast it to return only those bits */ + + return (u8) XIo_In32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_SetPktWaitBound +* +* DESCRIPTION: +* +* This function sets the value of the packet wait bound register of the +* DMA channel. This value reflects the timer value used to trigger an +* interrupt when not enough packets have been received to reach the packet +* count threshold. +* +* The timer is in millisecond units with +/- 33% accuracy. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* WaitBound is the value, in milliseconds, to be stored in the wait bound +* register of the DMA channel and is a value in the range 0 - 1023. A value +* of 0 disables the packet wait bound timer. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +void +XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound) +{ + /* assert to verify input arguments */ + + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(WaitBound < 1024); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* set the packet wait bound in the register such that interrupt may be + * generated, if enabled, when packets have not been handled for a specific + * amount of time + */ + XIo_Out32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET, WaitBound); +} + +/****************************************************************************** +* +* FUNCTION: +* +* XDmaChannel_GetPktWaitBound +* +* DESCRIPTION: +* +* This function gets the value of the packet wait bound register of the +* DMA channel. This value contains the timer value used to trigger an +* interrupt when not enough packets have been received to reach the packet +* count threshold. +* +* The timer is in millisecond units with +/- 33% accuracy. +* +* ARGUMENTS: +* +* InstancePtr contains a pointer to the DMA channel to operate on. The DMA +* channel should be configured to use scatter gather in order for this function +* to be called. +* +* RETURN VALUE: +* +* The packet wait bound register contents for the DMA channel. +* +* NOTES: +* +* None. +* +******************************************************************************/ +u32 +XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* get the packet wait bound from the register and return it */ + + return XIo_In32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET); +} diff --git a/board/xilinx/common/xio.h b/board/xilinx/common/xio.h new file mode 100644 index 00000000000..5bb09c8940b --- /dev/null +++ b/board/xilinx/common/xio.h @@ -0,0 +1,81 @@ +/* + * xio.h + * + * Defines XIo functions for Xilinx OCP in terms of Linux primitives + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef XIO_H +#define XIO_H + +#include "xbasic_types.h" +#include + +typedef u32 XIo_Address; + +extern inline u8 +XIo_In8(XIo_Address InAddress) +{ + return (u8) in_8((volatile unsigned char *) InAddress); +} +extern inline u16 +XIo_In16(XIo_Address InAddress) +{ + return (u16) in_be16((volatile unsigned short *) InAddress); +} +extern inline u32 +XIo_In32(XIo_Address InAddress) +{ + return (u32) in_be32((volatile unsigned *) InAddress); +} +extern inline void +XIo_Out8(XIo_Address OutAddress, u8 Value) +{ + out_8((volatile unsigned char *) OutAddress, Value); +} +extern inline void +XIo_Out16(XIo_Address OutAddress, u16 Value) +{ + out_be16((volatile unsigned short *) OutAddress, Value); +} +extern inline void +XIo_Out32(XIo_Address OutAddress, u32 Value) +{ + out_be32((volatile unsigned *) OutAddress, Value); +} + +#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s))) +#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s))) +#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s))) +#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s))) + +#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s))) +#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s))) +#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s))) +#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s))) + +#endif /* XIO_H */ diff --git a/board/xilinx/common/xipif_v1_23_b.h b/board/xilinx/common/xipif_v1_23_b.h new file mode 100644 index 00000000000..b1520e921e2 --- /dev/null +++ b/board/xilinx/common/xipif_v1_23_b.h @@ -0,0 +1,763 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/****************************************************************************** +* +* FILENAME: +* +* xipif.h +* +* DESCRIPTION: +* +* The XIpIf component encapsulates the IPIF, which is the standard interface +* that IP must adhere to when connecting to a bus. The purpose of this +* component is to encapsulate the IPIF processing such that maintainability +* is increased. This component does not provide a lot of abstraction from +* from the details of the IPIF as it is considered a building block for +* device drivers. A device driver designer must be familiar with the +* details of the IPIF hardware to use this component. +* +* The IPIF hardware provides a building block for all hardware devices such +* that each device does not need to reimplement these building blocks. The +* IPIF contains other building blocks, such as FIFOs and DMA channels, which +* are also common to many devices. These blocks are implemented as separate +* hardware blocks and instantiated within the IPIF. The primary hardware of +* the IPIF which is implemented by this software component is the interrupt +* architecture. Since there are many blocks of a device which may generate +* interrupts, all the interrupt processing is contained in the common part +* of the device, the IPIF. This interrupt processing is for the device level +* only and does not include any processing for the interrupt controller. +* +* A device is a mechanism such as an Ethernet MAC. The device is made +* up of several parts which include an IPIF and the IP. The IPIF contains most +* of the device infrastructure which is common to all devices, such as +* interrupt processing, DMA channels, and FIFOs. The infrastructure may also +* be referred to as IPIF internal blocks since they are part of the IPIF and +* are separate blocks that can be selected based upon the needs of the device. +* The IP of the device is the logic that is unique to the device and interfaces +* to the IPIF of the device. +* +* In general, there are two levels of registers within the IPIF. The first +* level, referred to as the device level, contains registers which are for the +* entire device. The second level, referred to as the IP level, contains +* registers which are specific to the IP of the device. The two levels of +* registers are designed to be hierarchical such that the device level is +* is a more general register set above the more specific registers of the IP. +* The IP level of registers provides functionality which is typically common +* across all devices and allows IP designers to focus on the unique aspects +* of the IP. +* +* Critical Sections +* +* It is the responsibility of the device driver designer to use critical +* sections as necessary when calling functions of the IPIF. This component +* does not use critical sections and it does access registers using +* read-modify-write operations. Calls to IPIF functions from a main thread +* and from an interrupt context could produce unpredictable behavior such that +* the caller must provide the appropriate critical sections. +* +* Mutual Exclusion +* +* The functions of the IPIF are not thread safe such that the caller of all +* functions is responsible for ensuring mutual exclusion for an IPIF. Mutual +* exclusion across multiple IPIF components is not necessary. +* +* NOTES: +* +* None. +* +* MODIFICATION HISTORY: +* +* Ver Who Date Changes +* ----- ---- -------- ----------------------------------------------- +* 1.23b jhl 02/27/01 Repartioned to minimize size +* +******************************************************************************/ + +#ifndef XIPIF_H /* prevent circular inclusions */ +#define XIPIF_H /* by using protection macros */ + +/***************************** Include Files *********************************/ +#include "xbasic_types.h" +#include "xstatus.h" +#include "xversion.h" + +/************************** Constant Definitions *****************************/ + +/* the following constants define the register offsets for the registers of the + * IPIF, there are some holes in the memory map for reserved addresses to allow + * other registers to be added and still match the memory map of the interrupt + * controller registers + */ +#define XIIF_V123B_DISR_OFFSET 0UL /* device interrupt status register */ +#define XIIF_V123B_DIPR_OFFSET 4UL /* device interrupt pending register */ +#define XIIF_V123B_DIER_OFFSET 8UL /* device interrupt enable register */ +#define XIIF_V123B_DIIR_OFFSET 24UL /* device interrupt ID register */ +#define XIIF_V123B_DGIER_OFFSET 28UL /* device global interrupt enable reg */ +#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */ +#define XIIF_V123B_IIER_OFFSET 40UL /* IP interrupt enable register */ +#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */ + +#define XIIF_V123B_RESET_MASK 0xAUL + +/* the following constant is used for the device global interrupt enable + * register, to enable all interrupts for the device, this is the only bit + * in the register + */ +#define XIIF_V123B_GINTR_ENABLE_MASK 0x80000000UL + +/* the following constants contain the masks to identify each internal IPIF + * condition in the device registers of the IPIF, interrupts are assigned + * in the register from LSB to the MSB + */ +#define XIIF_V123B_ERROR_MASK 1UL /* LSB of the register */ + +/* The following constants contain interrupt IDs which identify each internal + * IPIF condition, this value must correlate with the mask constant for the + * error + */ +#define XIIF_V123B_ERROR_INTERRUPT_ID 0 /* interrupt bit #, (LSB = 0) */ +#define XIIF_V123B_NO_INTERRUPT_ID 128 /* no interrupts are pending */ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_RESET +* +* DESCRIPTION: +* +* Reset the IPIF component and hardware. This is a destructive operation that +* could cause the loss of data since resetting the IPIF of a device also +* resets the device using the IPIF and any blocks, such as FIFOs or DMA +* channels, within the IPIF. All registers of the IPIF will contain their +* reset value when this function returns. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ + +/* the following constant is used in the reset register to cause the IPIF to + * reset + */ +#define XIIF_V123B_RESET(RegBaseAddress) \ + XIo_Out32(RegBaseAddress + XIIF_V123B_RESETR_OFFSET, XIIF_V123B_RESET_MASK) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_WRITE_DISR +* +* DESCRIPTION: +* +* This function sets the device interrupt status register to the value. +* This register indicates the status of interrupt sources for a device +* which contains the IPIF. The status is independent of whether interrupts +* are enabled and could be used for polling a device at a higher level rather +* than a more detailed level. +* +* Each bit of the register correlates to a specific interrupt source within the +* device which contains the IPIF. With the exception of some internal IPIF +* conditions, the contents of this register are not latched but indicate +* the live status of the interrupt sources within the device. Writing any of +* the non-latched bits of the register will have no effect on the register. +* +* For the latched bits of this register only, setting a bit which is zero +* within this register causes an interrupt to generated. The device global +* interrupt enable register and the device interrupt enable register must be set +* appropriately to allow an interrupt to be passed out of the device. The +* interrupt is cleared by writing to this register with the bits to be +* cleared set to a one and all others to zero. This register implements a +* toggle on write functionality meaning any bits which are set in the value +* written cause the bits in the register to change to the opposite state. +* +* This function writes the specified value to the register such that +* some bits may be set and others cleared. It is the caller's responsibility +* to get the value of the register prior to setting the value to prevent a +* destructive behavior. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* Status contains the value to be written to the interrupt status register of +* the device. The only bits which can be written are the latched bits which +* contain the internal IPIF conditions. The following values may be used to +* set the status register or clear an interrupt condition. +* +* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_WRITE_DISR(RegBaseAddress, Status) \ + XIo_Out32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET, (Status)) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_READ_DISR +* +* DESCRIPTION: +* +* This function gets the device interrupt status register contents. +* This register indicates the status of interrupt sources for a device +* which contains the IPIF. The status is independent of whether interrupts +* are enabled and could be used for polling a device at a higher level. +* +* Each bit of the register correlates to a specific interrupt source within the +* device which contains the IPIF. With the exception of some internal IPIF +* conditions, the contents of this register are not latched but indicate +* the live status of the interrupt sources within the device. +* +* For only the latched bits of this register, the interrupt may be cleared by +* writing to these bits in the status register. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* A status which contains the value read from the interrupt status register of +* the device. The bit definitions are specific to the device with +* the exception of the latched internal IPIF condition bits. The following +* values may be used to detect internal IPIF conditions in the status. +* +* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_READ_DISR(RegBaseAddress) \ + XIo_In32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_WRITE_DIER +* +* DESCRIPTION: +* +* This function sets the device interrupt enable register contents. +* This register controls which interrupt sources of the device are allowed to +* generate an interrupt. The device global interrupt enable register must also +* be set appropriately for an interrupt to be passed out of the device. +* +* Each bit of the register correlates to a specific interrupt source within the +* device which contains the IPIF. Setting a bit in this register enables that +* interrupt source to generate an interrupt. Clearing a bit in this register +* disables interrupt generation for that interrupt source. +* +* This function writes only the specified value to the register such that +* some interrupts source may be enabled and others disabled. It is the +* caller's responsibility to get the value of the interrupt enable register +* prior to setting the value to prevent an destructive behavior. +* +* An interrupt source may not be enabled to generate an interrupt, but can +* still be polled in the interrupt status register. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* Enable contains the value to be written to the interrupt enable register +* of the device. The bit definitions are specific to the device with +* the exception of the internal IPIF conditions. The following +* values may be used to enable the internal IPIF conditions interrupts. +* +* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* Signature: u32 XIIF_V123B_WRITE_DIER(u32 RegBaseAddress, +* u32 Enable) +* +******************************************************************************/ +#define XIIF_V123B_WRITE_DIER(RegBaseAddress, Enable) \ + XIo_Out32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET, (Enable)) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_READ_DIER +* +* DESCRIPTION: +* +* This function gets the device interrupt enable register contents. +* This register controls which interrupt sources of the device +* are allowed to generate an interrupt. The device global interrupt enable +* register and the device interrupt enable register must also be set +* appropriately for an interrupt to be passed out of the device. +* +* Each bit of the register correlates to a specific interrupt source within the +* device which contains the IPIF. Setting a bit in this register enables that +* interrupt source to generate an interrupt if the global enable is set +* appropriately. Clearing a bit in this register disables interrupt generation +* for that interrupt source regardless of the global interrupt enable. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* The value read from the interrupt enable register of the device. The bit +* definitions are specific to the device with the exception of the internal +* IPIF conditions. The following values may be used to determine from the +* value if the internal IPIF conditions interrupts are enabled. +* +* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_READ_DIER(RegBaseAddress) \ + XIo_In32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_READ_DIPR +* +* DESCRIPTION: +* +* This function gets the device interrupt pending register contents. +* This register indicates the pending interrupt sources, those that are waiting +* to be serviced by the software, for a device which contains the IPIF. +* An interrupt must be enabled in the interrupt enable register of the IPIF to +* be pending. +* +* Each bit of the register correlates to a specific interrupt source within the +* the device which contains the IPIF. With the exception of some internal IPIF +* conditions, the contents of this register are not latched since the condition +* is latched in the IP interrupt status register, by an internal block of the +* IPIF such as a FIFO or DMA channel, or by the IP of the device. This register +* is read only and is not latched, but it is necessary to acknowledge (clear) +* the interrupt condition by performing the appropriate processing for the IP +* or block within the IPIF. +* +* This register can be thought of as the contents of the interrupt status +* register ANDed with the contents of the interrupt enable register. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* The value read from the interrupt pending register of the device. The bit +* definitions are specific to the device with the exception of the latched +* internal IPIF condition bits. The following values may be used to detect +* internal IPIF conditions in the value. +* +* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_READ_DIPR(RegBaseAddress) \ + XIo_In32((RegBaseAddress) + XIIF_V123B_DIPR_OFFSET) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_READ_DIIR +* +* DESCRIPTION: +* +* This function gets the device interrupt ID for the highest priority interrupt +* which is pending from the interrupt ID register. This function provides +* priority resolution such that faster interrupt processing is possible. +* Without priority resolution, it is necessary for the software to read the +* interrupt pending register and then check each interrupt source to determine +* if an interrupt is pending. Priority resolution becomes more important as the +* number of interrupt sources becomes larger. +* +* Interrupt priorities are based upon the bit position of the interrupt in the +* interrupt pending register with bit 0 being the highest priority. The +* interrupt ID is the priority of the interrupt, 0 - 31, with 0 being the +* highest priority. The interrupt ID register is live rather than latched such +* that multiple calls to this function may not yield the same results. A +* special value, outside of the interrupt priority range of 0 - 31, is +* contained in the register which indicates that no interrupt is pending. This +* may be useful for allowing software to continue processing interrupts in a +* loop until there are no longer any interrupts pending. +* +* The interrupt ID is designed to allow a function pointer table to be used +* in the software such that the interrupt ID is used as an index into that +* table. The function pointer table could contain an instance pointer, such +* as to DMA channel, and a function pointer to the function which handles +* that interrupt. This design requires the interrupt processing of the device +* driver to be partitioned into smaller more granular pieces based upon +* hardware used by the device, such as DMA channels and FIFOs. +* +* It is not mandatory that this function be used by the device driver software. +* It may choose to read the pending register and resolve the pending interrupt +* priorities on it's own. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* An interrupt ID, 0 - 31, which identifies the highest priority interrupt +* which is pending. A value of XIIF_NO_INTERRUPT_ID indicates that there is +* no interrupt pending. The following values may be used to identify the +* interrupt ID for the internal IPIF interrupts. +* +* XIIF_V123B_ERROR_INTERRUPT_ID Indicates a device error in the IPIF +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_READ_DIIR(RegBaseAddress) \ + XIo_In32((RegBaseAddress) + XIIF_V123B_DIIR_OFFSET) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_GLOBAL_INTR_DISABLE +* +* DESCRIPTION: +* +* This function disables all interrupts for the device by writing to the global +* interrupt enable register. This register provides the ability to disable +* interrupts without any modifications to the interrupt enable register such +* that it is minimal effort to restore the interrupts to the previous enabled +* state. The corresponding function, XIpIf_GlobalIntrEnable, is provided to +* restore the interrupts to the previous enabled state. This function is +* designed to be used in critical sections of device drivers such that it is +* not necessary to disable other device interrupts. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_GINTR_DISABLE(RegBaseAddress) \ + XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, 0) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_GINTR_ENABLE +* +* DESCRIPTION: +* +* This function writes to the global interrupt enable register to enable +* interrupts from the device. This register provides the ability to enable +* interrupts without any modifications to the interrupt enable register such +* that it is minimal effort to restore the interrupts to the previous enabled +* state. This function does not enable individual interrupts as the interrupt +* enable register must be set appropriately. This function is designed to be +* used in critical sections of device drivers such that it is not necessary to +* disable other device interrupts. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_GINTR_ENABLE(RegBaseAddress) \ + XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, \ + XIIF_V123B_GINTR_ENABLE_MASK) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_IS_GINTR_ENABLED +* +* DESCRIPTION: +* +* This function determines if interrupts are enabled at the global level by +* reading the gloabl interrupt register. This register provides the ability to +* disable interrupts without any modifications to the interrupt enable register +* such that it is minimal effort to restore the interrupts to the previous +* enabled state. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* TRUE if interrupts are enabled for the IPIF, FALSE otherwise. +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_IS_GINTR_ENABLED(RegBaseAddress) \ + (XIo_In32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET) == \ + XIIF_V123B_GINTR_ENABLE_MASK) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_WRITE_IISR +* +* DESCRIPTION: +* +* This function sets the IP interrupt status register to the specified value. +* This register indicates the status of interrupt sources for the IP of the +* device. The IP is defined as the part of the device that connects to the +* IPIF. The status is independent of whether interrupts are enabled such that +* the status register may also be polled when interrupts are not enabled. +* +* Each bit of the register correlates to a specific interrupt source within the +* IP. All bits of this register are latched. Setting a bit which is zero +* within this register causes an interrupt to be generated. The device global +* interrupt enable register and the device interrupt enable register must be set +* appropriately to allow an interrupt to be passed out of the device. The +* interrupt is cleared by writing to this register with the bits to be +* cleared set to a one and all others to zero. This register implements a +* toggle on write functionality meaning any bits which are set in the value +* written cause the bits in the register to change to the opposite state. +* +* This function writes only the specified value to the register such that +* some status bits may be set and others cleared. It is the caller's +* responsibility to get the value of the register prior to setting the value +* to prevent an destructive behavior. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* Status contains the value to be written to the IP interrupt status +* register. The bit definitions are specific to the device IP. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_WRITE_IISR(RegBaseAddress, Status) \ + XIo_Out32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET, (Status)) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_READ_IISR +* +* DESCRIPTION: +* +* This function gets the contents of the IP interrupt status register. +* This register indicates the status of interrupt sources for the IP of the +* device. The IP is defined as the part of the device that connects to the +* IPIF. The status is independent of whether interrupts are enabled such +* that the status register may also be polled when interrupts are not enabled. +* +* Each bit of the register correlates to a specific interrupt source within the +* device. All bits of this register are latched. Writing a 1 to a bit within +* this register causes an interrupt to be generated if enabled in the interrupt +* enable register and the global interrupt enable is set. Since the status is +* latched, each status bit must be acknowledged in order for the bit in the +* status register to be updated. Each bit can be acknowledged by writing a +* 0 to the bit in the status register. + +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* A status which contains the value read from the IP interrupt status register. +* The bit definitions are specific to the device IP. +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_READ_IISR(RegBaseAddress) \ + XIo_In32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_WRITE_IIER +* +* DESCRIPTION: +* +* This function sets the IP interrupt enable register contents. This register +* controls which interrupt sources of the IP are allowed to generate an +* interrupt. The global interrupt enable register and the device interrupt +* enable register must also be set appropriately for an interrupt to be +* passed out of the device containing the IPIF and the IP. +* +* Each bit of the register correlates to a specific interrupt source within the +* IP. Setting a bit in this register enables the interrupt source to generate +* an interrupt. Clearing a bit in this register disables interrupt generation +* for that interrupt source. +* +* This function writes only the specified value to the register such that +* some interrupt sources may be enabled and others disabled. It is the +* caller's responsibility to get the value of the interrupt enable register +* prior to setting the value to prevent an destructive behavior. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* Enable contains the value to be written to the IP interrupt enable register. +* The bit definitions are specific to the device IP. +* +* RETURN VALUE: +* +* None. +* +* NOTES: +* +* None. +* +******************************************************************************/ +#define XIIF_V123B_WRITE_IIER(RegBaseAddress, Enable) \ + XIo_Out32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET, (Enable)) + +/****************************************************************************** +* +* MACRO: +* +* XIIF_V123B_READ_IIER +* +* DESCRIPTION: +* +* +* This function gets the IP interrupt enable register contents. This register +* controls which interrupt sources of the IP are allowed to generate an +* interrupt. The global interrupt enable register and the device interrupt +* enable register must also be set appropriately for an interrupt to be +* passed out of the device containing the IPIF and the IP. +* +* Each bit of the register correlates to a specific interrupt source within the +* IP. Setting a bit in this register enables the interrupt source to generate +* an interrupt. Clearing a bit in this register disables interrupt generation +* for that interrupt source. +* +* ARGUMENTS: +* +* RegBaseAddress contains the base address of the IPIF registers. +* +* RETURN VALUE: +* +* The contents read from the IP interrupt enable register. The bit definitions +* are specific to the device IP. +* +* NOTES: +* +* Signature: u32 XIIF_V123B_READ_IIER(u32 RegBaseAddress) +* +******************************************************************************/ +#define XIIF_V123B_READ_IIER(RegBaseAddress) \ + XIo_In32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET) + +/************************** Function Prototypes ******************************/ + +/* + * Initialization Functions + */ +XStatus XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth); + +#endif /* end of protection macro */ diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.c b/board/xilinx/common/xpacket_fifo_v1_00_b.c new file mode 100644 index 00000000000..ae2d6d43c54 --- /dev/null +++ b/board/xilinx/common/xpacket_fifo_v1_00_b.c @@ -0,0 +1,448 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/* +* +* @file xpacket_fifo_v1_00_b.c +* +* Contains functions for the XPacketFifoV100b component. See xpacket_fifo_v1_00_b.h +* for more information about the component. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b rpm 03/26/02  First release
+* 
+* +*****************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xio.h" +#include "xstatus.h" +#include "xpacket_fifo_v1_00_b.h" + +/************************** Constant Definitions *****************************/ + +/* width of a FIFO word */ + +#define XPF_FIFO_WIDTH_BYTE_COUNT 4UL + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************* Variable Definitions ******************************/ + +/************************** Function Prototypes ******************************/ + +/*****************************************************************************/ +/* +* +* This function initializes a packet FIFO. Initialization resets the +* FIFO such that it's empty and ready to use. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* @param RegBaseAddress contains the base address of the registers for +* the packet FIFO. +* @param DataBaseAddress contains the base address of the data for +* the packet FIFO. +* +* @return +* +* Always returns XST_SUCCESS. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr, + u32 RegBaseAddress, u32 DataBaseAddress) +{ + /* assert to verify input argument are valid */ + + XASSERT_NONVOID(InstancePtr != NULL); + + /* initialize the component variables to the specified state */ + + InstancePtr->RegBaseAddress = RegBaseAddress; + InstancePtr->DataBaseAddress = DataBaseAddress; + InstancePtr->IsReady = XCOMPONENT_IS_READY; + + /* reset the FIFO such that it's empty and ready to use and indicate the + * initialization was successful, note that the is ready variable must be + * set prior to calling the reset function to prevent an assert + */ + XPF_V100B_RESET(InstancePtr); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/* +* +* This function performs a self-test on the specified packet FIFO. The self +* test resets the FIFO and reads a register to determine if it is the correct +* reset value. This test is destructive in that any data in the FIFO will +* be lost. +* +* @param InstancePtr is a pointer to the packet FIFO to be operated on. +* +* @param FifoType specifies the type of FIFO, read or write, for the self test. +* The FIFO type is specified by the values XPF_READ_FIFO_TYPE or +* XPF_WRITE_FIFO_TYPE. +* +* @return +* +* XST_SUCCESS is returned if the selftest is successful, or +* XST_PFIFO_BAD_REG_VALUE indicating that the value readback from the +* occupancy/vacancy count register after a reset does not match the +* specified reset value. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType) +{ + u32 Register; + + /* assert to verify valid input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID((FifoType == XPF_READ_FIFO_TYPE) || + (FifoType == XPF_WRITE_FIFO_TYPE)); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* reset the fifo and then check to make sure the occupancy/vacancy + * register contents are correct for a reset condition + */ + XPF_V100B_RESET(InstancePtr); + + Register = XIo_In32(InstancePtr->RegBaseAddress + + XPF_COUNT_STATUS_REG_OFFSET); + + /* check the value of the register to ensure that it's correct for the + * specified FIFO type since both FIFO types reset to empty, but a bit + * in the register changes definition based upon FIFO type + */ + + if (FifoType == XPF_READ_FIFO_TYPE) { + /* check the regiser value for a read FIFO which should be empty */ + + if (Register != XPF_EMPTY_FULL_MASK) { + return XST_PFIFO_BAD_REG_VALUE; + } + } else { + /* check the register value for a write FIFO which should not be full + * on reset + */ + if ((Register & XPF_EMPTY_FULL_MASK) != 0) { + return XST_PFIFO_BAD_REG_VALUE; + } + } + + /* the test was successful */ + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/* +* +* Read data from a FIFO and puts it into a specified buffer. The packet FIFO is +* currently 32 bits wide such that an input buffer which is a series of bytes +* is filled from the FIFO a word at a time. If the requested byte count is not +* a multiple of 32 bit words, it is necessary for this function to format the +* remaining 32 bit word from the FIFO into a series of bytes in the buffer. +* There may be up to 3 extra bytes which must be extracted from the last word +* of the FIFO and put into the buffer. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* @param BufferPtr points to the memory buffer to write the data into. This +* buffer must be 32 bit aligned or an alignment exception could be +* generated. Since this buffer is a byte buffer, the data is assumed to +* be endian independent. +* @param ByteCount contains the number of bytes to read from the FIFO. This +* number of bytes must be present in the FIFO or an error will be +* returned. +* +* @return +* +* XST_SUCCESS indicates the operation was successful. If the number of +* bytes specified by the byte count is not present in the FIFO +* XST_PFIFO_LACK_OF_DATA is returned. +* +* If the function was successful, the specified buffer is modified to contain +* the bytes which were removed from the FIFO. +* +* @note +* +* Note that the exact number of bytes which are present in the FIFO is +* not known by this function. It can only check for a number of 32 bit +* words such that if the byte count specified is incorrect, but is still +* possible based on the number of words in the FIFO, up to 3 garbage bytes +* may be present at the end of the buffer. +*

+* This function assumes that if the device consuming data from the FIFO is +* a byte device, the order of the bytes to be consumed is from the most +* significant byte to the least significant byte of a 32 bit word removed +* from the FIFO. +* +******************************************************************************/ +XStatus +XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr, + u8 * BufferPtr, u32 ByteCount) +{ + u32 FifoCount; + u32 WordCount; + u32 ExtraByteCount; + u32 *WordBuffer = (u32 *) BufferPtr; + + /* assert to verify valid input arguments including 32 bit alignment of + * the buffer pointer + */ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BufferPtr != NULL); + XASSERT_NONVOID(((u32) BufferPtr & + (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0); + XASSERT_NONVOID(ByteCount != 0); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* get the count of how many 32 bit words are in the FIFO, if there aren't + * enought words to satisfy the request, return an error + */ + + FifoCount = XIo_In32(InstancePtr->RegBaseAddress + + XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; + + if ((FifoCount * XPF_FIFO_WIDTH_BYTE_COUNT) < ByteCount) { + return XST_PFIFO_LACK_OF_DATA; + } + + /* calculate the number of words to read from the FIFO before the word + * containing the extra bytes, and calculate the number of extra bytes + * the extra bytes are defined as those at the end of the buffer when + * the buffer does not end on a 32 bit boundary + */ + WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT; + ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT; + + /* Read the 32 bit words from the FIFO for all the buffer except the + * last word which contains the extra bytes, the following code assumes + * that the buffer is 32 bit aligned, otherwise an alignment exception could + * be generated + */ + for (FifoCount = 0; FifoCount < WordCount; FifoCount++) { + WordBuffer[FifoCount] = XIo_In32(InstancePtr->DataBaseAddress); + } + + /* if there are extra bytes to handle, read the last word from the FIFO + * and insert the extra bytes into the buffer + */ + if (ExtraByteCount > 0) { + u32 LastWord; + u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount); + + /* get the last word from the FIFO for the extra bytes */ + + LastWord = XIo_In32(InstancePtr->DataBaseAddress); + + /* one extra byte in the last word, put the byte into the next location + * of the buffer, bytes in a word of the FIFO are ordered from most + * significant byte to least + */ + if (ExtraByteCount == 1) { + ExtraBytesBuffer[0] = (u8) (LastWord >> 24); + } + + /* two extra bytes in the last word, put each byte into the next two + * locations of the buffer + */ + else if (ExtraByteCount == 2) { + ExtraBytesBuffer[0] = (u8) (LastWord >> 24); + ExtraBytesBuffer[1] = (u8) (LastWord >> 16); + } + /* three extra bytes in the last word, put each byte into the next three + * locations of the buffer + */ + else if (ExtraByteCount == 3) { + ExtraBytesBuffer[0] = (u8) (LastWord >> 24); + ExtraBytesBuffer[1] = (u8) (LastWord >> 16); + ExtraBytesBuffer[2] = (u8) (LastWord >> 8); + } + } + return XST_SUCCESS; +} + +/*****************************************************************************/ +/* +* +* Write data into a packet FIFO. The packet FIFO is currently 32 bits wide +* such that an input buffer which is a series of bytes must be written into the +* FIFO a word at a time. If the buffer is not a multiple of 32 bit words, it is +* necessary for this function to format the remaining bytes into a single 32 +* bit word to be inserted into the FIFO. This is necessary to avoid any +* accesses past the end of the buffer. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* @param BufferPtr points to the memory buffer that data is to be read from +* and written into the FIFO. Since this buffer is a byte buffer, the data +* is assumed to be endian independent. This buffer must be 32 bit aligned +* or an alignment exception could be generated. +* @param ByteCount contains the number of bytes to read from the buffer and to +* write to the FIFO. +* +* @return +* +* XST_SUCCESS is returned if the operation succeeded. If there is not enough +* room in the FIFO to hold the specified bytes, XST_PFIFO_NO_ROOM is +* returned. +* +* @note +* +* This function assumes that if the device inserting data into the FIFO is +* a byte device, the order of the bytes in each 32 bit word is from the most +* significant byte to the least significant byte. +* +******************************************************************************/ +XStatus +XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr, + u8 * BufferPtr, u32 ByteCount) +{ + u32 FifoCount; + u32 WordCount; + u32 ExtraByteCount; + u32 *WordBuffer = (u32 *) BufferPtr; + + /* assert to verify valid input arguments including 32 bit alignment of + * the buffer pointer + */ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BufferPtr != NULL); + XASSERT_NONVOID(((u32) BufferPtr & + (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0); + XASSERT_NONVOID(ByteCount != 0); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* get the count of how many words may be inserted into the FIFO */ + + FifoCount = XIo_In32(InstancePtr->RegBaseAddress + + XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; + + /* Calculate the number of 32 bit words required to insert the specified + * number of bytes in the FIFO and determine the number of extra bytes + * if the buffer length is not a multiple of 32 bit words + */ + + WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT; + ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT; + + /* take into account the extra bytes in the total word count */ + + if (ExtraByteCount > 0) { + WordCount++; + } + + /* if there's not enough room in the FIFO to hold the specified + * number of bytes, then indicate an error, + */ + if (FifoCount < WordCount) { + return XST_PFIFO_NO_ROOM; + } + + /* readjust the word count to not take into account the extra bytes */ + + if (ExtraByteCount > 0) { + WordCount--; + } + + /* Write all the bytes of the buffer which can be written as 32 bit + * words into the FIFO, waiting to handle the extra bytes seperately + */ + for (FifoCount = 0; FifoCount < WordCount; FifoCount++) { + XIo_Out32(InstancePtr->DataBaseAddress, WordBuffer[FifoCount]); + } + + /* if there are extra bytes to handle, extract them from the buffer + * and create a 32 bit word and write it to the FIFO + */ + if (ExtraByteCount > 0) { + u32 LastWord = 0; + u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount); + + /* one extra byte in the buffer, put the byte into the last word + * to be inserted into the FIFO, perform this processing inline rather + * than in a loop to help performance + */ + if (ExtraByteCount == 1) { + LastWord = ExtraBytesBuffer[0] << 24; + } + + /* two extra bytes in the buffer, put each byte into the last word + * to be inserted into the FIFO + */ + else if (ExtraByteCount == 2) { + LastWord = ExtraBytesBuffer[0] << 24 | + ExtraBytesBuffer[1] << 16; + } + + /* three extra bytes in the buffer, put each byte into the last word + * to be inserted into the FIFO + */ + else if (ExtraByteCount == 3) { + LastWord = ExtraBytesBuffer[0] << 24 | + ExtraBytesBuffer[1] << 16 | + ExtraBytesBuffer[2] << 8; + } + + /* write the last 32 bit word to the FIFO and return with no errors */ + + XIo_Out32(InstancePtr->DataBaseAddress, LastWord); + } + + return XST_SUCCESS; +} diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.h b/board/xilinx/common/xpacket_fifo_v1_00_b.h new file mode 100644 index 00000000000..1cda0e8cc47 --- /dev/null +++ b/board/xilinx/common/xpacket_fifo_v1_00_b.h @@ -0,0 +1,306 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/* +* +* @file xpacket_fifo_v1_00_b.h +* +* This component is a common component because it's primary purpose is to +* prevent code duplication in drivers. A driver which must handle a packet +* FIFO uses this component rather than directly manipulating a packet FIFO. +* +* A FIFO is a device which has dual port memory such that one user may be +* inserting data into the FIFO while another is consuming data from the FIFO. +* A packet FIFO is designed for use with packet protocols such as Ethernet and +* ATM. It is typically only used with devices when DMA and/or Scatter Gather +* is used. It differs from a nonpacket FIFO in that it does not provide any +* interrupts for thresholds of the FIFO such that it is less useful without +* DMA. +* +* @note +* +* This component has the capability to generate an interrupt when an error +* condition occurs. It is the user's responsibility to provide the interrupt +* processing to handle the interrupt. This component provides the ability to +* determine if that interrupt is active, a deadlock condition, and the ability +* to reset the FIFO to clear the condition. In this condition, the device which +* is using the FIFO should also be reset to prevent other problems. This error +* condition could occur as a normal part of operation if the size of the FIFO +* is not setup correctly. See the hardware IP specification for more details. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b rpm 03/26/02  First release
+* 
+* +*****************************************************************************/ +#ifndef XPACKET_FIFO_H /* prevent circular inclusions */ +#define XPACKET_FIFO_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xstatus.h" + +/************************** Constant Definitions *****************************/ + +/* + * These constants specify the FIFO type and are mutually exclusive + */ +#define XPF_READ_FIFO_TYPE 0 /* a read FIFO */ +#define XPF_WRITE_FIFO_TYPE 1 /* a write FIFO */ + +/* + * These constants define the offsets to each of the registers from the + * register base address, each of the constants are a number of bytes + */ +#define XPF_RESET_REG_OFFSET 0UL +#define XPF_MODULE_INFO_REG_OFFSET 0UL +#define XPF_COUNT_STATUS_REG_OFFSET 4UL + +/* + * This constant is used with the Reset Register + */ +#define XPF_RESET_FIFO_MASK 0x0000000A + +/* + * These constants are used with the Occupancy/Vacancy Count Register. This + * register also contains FIFO status + */ +#define XPF_COUNT_MASK 0x0000FFFF +#define XPF_DEADLOCK_MASK 0x20000000 +#define XPF_ALMOST_EMPTY_FULL_MASK 0x40000000 +#define XPF_EMPTY_FULL_MASK 0x80000000 + +/**************************** Type Definitions *******************************/ + +/* + * The XPacketFifo driver instance data. The driver is required to allocate a + * variable of this type for every packet FIFO in the device. + */ +typedef struct { + u32 RegBaseAddress; /* Base address of registers */ + u32 IsReady; /* Device is initialized and ready */ + u32 DataBaseAddress; /* Base address of data for FIFOs */ +} XPacketFifoV100b; + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/* +* +* Reset the specified packet FIFO. Resetting a FIFO will cause any data +* contained in the FIFO to be lost. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* None. +* +* @note +* +* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_RESET(InstancePtr) \ + XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK); + +/*****************************************************************************/ +/* +* +* Get the occupancy count for a read packet FIFO and the vacancy count for a +* write packet FIFO. These counts indicate the number of 32-bit words +* contained (occupancy) in the FIFO or the number of 32-bit words available +* to write (vacancy) in the FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* The occupancy or vacancy count for the specified packet FIFO. +* +* @note +* +* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_GET_COUNT(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_COUNT_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is almost empty. Almost empty is +* defined for a read FIFO when there is only one data word in the FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is almost empty, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_ALMOST_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is almost full. Almost full is +* defined for a write FIFO when there is only one available data word in the +* FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is almost full, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_ALMOST_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is empty. This applies only to a +* read FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is empty, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_EMPTY(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is full. This applies only to a +* write FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is full, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_FULL(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is deadlocked. This condition occurs +* when the FIFO is full and empty at the same time and is caused by a packet +* being written to the FIFO which exceeds the total data capacity of the FIFO. +* It occurs because of the mark/restore features of the packet FIFO which allow +* retransmission of a packet. The software should reset the FIFO and any devices +* using the FIFO when this condition occurs. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is deadlocked, FALSE otherwise. +* +* @note +* +* This component has the capability to generate an interrupt when an error +* condition occurs. It is the user's responsibility to provide the interrupt +* processing to handle the interrupt. This function provides the ability to +* determine if a deadlock condition, and the ability to reset the FIFO to +* clear the condition. +* +* In this condition, the device which is using the FIFO should also be reset +* to prevent other problems. This error condition could occur as a normal part +* of operation if the size of the FIFO is not setup correctly. +* +* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_DEADLOCK_MASK) + +/************************** Function Prototypes ******************************/ + +/* Standard functions */ + +XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr, + u32 RegBaseAddress, u32 DataBaseAddress); +XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType); + +/* Data functions */ + +XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr, + u8 * ReadBufferPtr, u32 ByteCount); +XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr, + u8 * WriteBufferPtr, u32 ByteCount); + +#endif /* end of protection macro */ diff --git a/board/xilinx/common/xstatus.h b/board/xilinx/common/xstatus.h new file mode 100644 index 00000000000..ffda4d7d4df --- /dev/null +++ b/board/xilinx/common/xstatus.h @@ -0,0 +1,347 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xstatus.h +* +* This file contains Xilinx software status codes. Status codes have their +* own data type called XStatus. These codes are used throughout the Xilinx +* device drivers. +* +******************************************************************************/ + +#ifndef XSTATUS_H /* prevent circular inclusions */ +#define XSTATUS_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" + +/************************** Constant Definitions *****************************/ + +/*********************** Common statuses 0 - 500 *****************************/ + +#define XST_SUCCESS 0L +#define XST_FAILURE 1L +#define XST_DEVICE_NOT_FOUND 2L +#define XST_DEVICE_BLOCK_NOT_FOUND 3L +#define XST_INVALID_VERSION 4L +#define XST_DEVICE_IS_STARTED 5L +#define XST_DEVICE_IS_STOPPED 6L +#define XST_FIFO_ERROR 7L /* an error occurred during an + operation with a FIFO such as + an underrun or overrun, this + error requires the device to + be reset */ +#define XST_RESET_ERROR 8L /* an error occurred which requires + the device to be reset */ +#define XST_DMA_ERROR 9L /* a DMA error occurred, this error + typically requires the device + using the DMA to be reset */ +#define XST_NOT_POLLED 10L /* the device is not configured for + polled mode operation */ +#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put + the specified data into */ +#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough + to hold the expected data */ +#define XST_NO_DATA 13L /* there was no data available */ +#define XST_REGISTER_ERROR 14L /* a register did not contain the + expected value */ +#define XST_INVALID_PARAM 15L /* an invalid parameter was passed + into the function */ +#define XST_NOT_SGDMA 16L /* the device is not configured for + scatter-gather DMA operation */ +#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */ +#define XST_NO_CALLBACK 18L /* a callback has not yet been + * registered */ +#define XST_NO_FEATURE 19L /* device is not configured with + * the requested feature */ +#define XST_NOT_INTERRUPT 20L /* device is not configured for + * interrupt mode operation */ +#define XST_DEVICE_BUSY 21L /* device is busy */ +#define XST_ERROR_COUNT_MAX 22L /* the error counters of a device + * have maxed out */ +#define XST_IS_STARTED 23L /* used when part of device is + * already started i.e. + * sub channel */ +#define XST_IS_STOPPED 24L /* used when part of device is + * already stopped i.e. + * sub channel */ + +/***************** Utility Component statuses 401 - 500 *********************/ + +#define XST_MEMTEST_FAILED 401L /* memory test failed */ + +/***************** Common Components statuses 501 - 1000 *********************/ + +/********************* Packet Fifo statuses 501 - 510 ************************/ + +#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */ +#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */ +#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value + was invalid after reset */ + +/************************** DMA statuses 511 - 530 ***************************/ + +#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer + failed */ +#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value + was invalid after reset */ +#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains + no buffer descriptors ready + to be processed */ +#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */ +#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */ +#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of + the scatter gather list are + being used */ +#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer + descriptor which is to be + copied over in the scatter + list is locked */ +#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been + put into the scatter gather + list to be commited */ +#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold + specified was larger than the + total # of buffer descriptors + in the scatter gather list */ +#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has + already been created */ +#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has + been created */ +#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was + being started was not committed + to the list */ +#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start + has already been used by the + hardware so it can't be reused + */ + +/************************** IPIF statuses 531 - 550 ***************************/ + +#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width + was passed into the function */ +#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at + reset was not valid */ +#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt + status register did not read + back correctly */ +#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status + register did not reset when + acked */ +#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable + register was not updated when + other registers changed */ +#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt + status register did not read + back correctly */ +#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register + did not reset when acked */ +#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was + not updated correctly when other + registers changed */ +#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending + register did not indicate the + expected value */ +#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register + did not indicate the expected + value */ + +/****************** Device specific statuses 1001 - 4095 *********************/ + +/********************* Ethernet statuses 1001 - 1050 *************************/ + +#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough + * to hold the minimum number of + * buffers or descriptors */ +#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */ +#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */ +#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */ +#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Adapter is out of buffers */ +#define XST_EMAC_PARSE_ERROR 1006L /* Invalid adapter init string */ +#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late + * collision on polled send */ + +/*********************** UART statuses 1051 - 1075 ***************************/ +#define XST_UART + +#define XST_UART_INIT_ERROR 1051L +#define XST_UART_START_ERROR 1052L +#define XST_UART_CONFIG_ERROR 1053L +#define XST_UART_TEST_FAIL 1054L +#define XST_UART_BAUD_ERROR 1055L +#define XST_UART_BAUD_RANGE 1056L + +/************************ IIC statuses 1076 - 1100 ***************************/ + +#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */ +#define XST_IIC_BUS_BUSY 1077 /* bus found busy */ +#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */ + /* general call address */ +#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */ + /* value after reset not valid */ +#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */ + /* value after reset not valid */ +#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */ + /* value after reset not valid */ +#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */ + /* value after reset not valid */ +#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */ + /* didn't return value written */ +#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */ + /* didn't return value written */ +#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */ + /* didn't return value written */ +#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */ + /* didn't return value written */ +#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */ + /* didn't return written value */ +#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */ + +/*********************** ATMC statuses 1101 - 1125 ***************************/ + +#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM + controller hit the max value + which requires the statistics + to be cleared */ + +/*********************** Flash statuses 1126 - 1150 **************************/ + +#define XST_FLASH_BUSY 1126L /* Flash is erasing or programming */ +#define XST_FLASH_READY 1127L /* Flash is ready for commands */ +#define XST_FLASH_ERROR 1128L /* Flash had detected an internal + error. Use XFlash_DeviceControl + to retrieve device specific codes */ +#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state */ +#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state */ +#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by + driver */ +#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */ +#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */ +#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation + aborted due to a timeout */ +#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its + addressible range */ +#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */ +#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from + write/erase function with + XFL_NON_BLOCKING_WRITE/ERASE + option cleared */ +#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */ + +/*********************** SPI statuses 1151 - 1175 ****************************/ + +#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */ +#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */ +#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */ +#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */ +#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */ +#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being + * selected */ +#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */ +#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only */ +#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */ + +/********************** OPB Arbiter statuses 1176 - 1200 *********************/ + +#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either + * one master assigned to two or more + * priorities, or one master not + * assigned to any priority + */ +#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the + * priority levels without first + * suspending the use of priority + * levels + */ +#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but + * bus parking was not enabled + */ +#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed + * priority mode to allow the + * priorities to be changed + */ + +/************************ Intc statuses 1201 - 1225 **************************/ + +#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */ +#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */ + +/********************** TmrCtr statuses 1226 - 1250 **************************/ + +#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */ + +/********************** WdtTb statuses 1251 - 1275 ***************************/ + +#define XST_WDTTB_TIMER_FAILED 1251L + +/********************** PlbArb statuses 1276 - 1300 **************************/ + +#define XST_PLBARB_FAIL_SELFTEST 1276L + +/********************** Plb2Opb statuses 1301 - 1325 *************************/ + +#define XST_PLB2OPB_FAIL_SELFTEST 1301L + +/********************** Opb2Plb statuses 1326 - 1350 *************************/ + +#define XST_OPB2PLB_FAIL_SELFTEST 1326L + +/********************** SysAce statuses 1351 - 1360 **************************/ + +#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */ + +/********************** PCI Bridge statuses 1361 - 1375 **********************/ + +#define XST_PCI_INVALID_ADDRESS 1361L + +/**************************** Type Definitions *******************************/ + +/** + * The status typedef. + */ +typedef u32 XStatus; + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +#endif /* end of protection macro */ diff --git a/board/xilinx/common/xversion.c b/board/xilinx/common/xversion.c new file mode 100644 index 00000000000..c8a69158583 --- /dev/null +++ b/board/xilinx/common/xversion.c @@ -0,0 +1,350 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/***************************************************************************** +* +* This file contains the implementation of the XVersion component. This +* component represents a version ID. It is encapsulated within a component +* so that it's type and implementation can change without affecting users of +* it. +* +* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z +* X is the major revision, YY is the minor revision, and Z is the +* compatability revision. +* +* Packed versions are also utilized for the configuration ROM such that +* memory is minimized. A packed version consumes only 16 bits and is +* formatted as follows. +* +*
+* Revision                  Range       Bit Positions
+*
+* Major Revision            0 - 9       Bits 15 - 12
+* Minor Revision            0 - 99      Bits 11 - 5
+* Compatability Revision    a - z       Bits 4 - 0
+
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xversion.h" + +/************************** Constant Definitions *****************************/ + +/* the following constants define the masks and shift values to allow the + * revisions to be packed and unpacked, a packed version is packed into a 16 + * bit value in the following format, XXXXYYYYYYYZZZZZ, where XXXX is the + * major revision, YYYYYYY is the minor revision, and ZZZZZ is the compatability + * revision + */ +#define XVE_MAJOR_SHIFT_VALUE 12 +#define XVE_MINOR_ONLY_MASK 0x0FE0 +#define XVE_MINOR_SHIFT_VALUE 5 +#define XVE_COMP_ONLY_MASK 0x001F + +/* the following constants define the specific characters of a version string + * for each character of the revision, a version string is in the following + * format, "X.YYZ" where X is the major revision (0 - 9), YY is the minor + * revision (00 - 99), and Z is the compatability revision (a - z) + */ +#define XVE_MAJOR_CHAR 0 /* major revision 0 - 9 */ +#define XVE_MINOR_TENS_CHAR 2 /* minor revision tens 0 - 9 */ +#define XVE_MINOR_ONES_CHAR 3 /* minor revision ones 0 - 9 */ +#define XVE_COMP_CHAR 4 /* compatability revision a - z */ +#define XVE_END_STRING_CHAR 5 + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +static u32 IsVersionStringValid(s8 * StringPtr); + +/***************************************************************************** +* +* Unpacks a packed version into the specified version. Versions are packed +* into the configuration ROM to reduce the amount storage. A packed version +* is a binary format as oppossed to a non-packed version which is implemented +* as a string. +* +* @param InstancePtr points to the version to unpack the packed version into. +* @param PackedVersion contains the packed version to unpack. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion) +{ + /* not implemented yet since CROM related */ +} + +/***************************************************************************** +* +* Packs a version into the specified packed version. Versions are packed into +* the configuration ROM to reduce the amount storage. +* +* @param InstancePtr points to the version to pack. +* @param PackedVersionPtr points to the packed version which will receive +* the new packed version. +* +* @return +* +* A status, XST_SUCCESS, indicating the packing was accomplished +* successfully, or an error, XST_INVALID_VERSION, indicating the specified +* input version was not valid such that the pack did not occur +*

+* The packed version pointed to by PackedVersionPtr is modified with the new +* packed version if the status indicates success. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersionPtr) +{ + /* not implemented yet since CROM related */ + + return XST_SUCCESS; +} + +/***************************************************************************** +* +* Determines if two versions are equal. +* +* @param InstancePtr points to the first version to be compared. +* @param VersionPtr points to a second version to be compared. +* +* @return +* +* TRUE if the versions are equal, FALSE otherwise. +* +* @note +* +* None. +* +******************************************************************************/ +u32 +XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr) +{ + u8 *Version1 = (u8 *) InstancePtr; + u8 *Version2 = (u8 *) VersionPtr; + int Index; + + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(VersionPtr != NULL); + + /* check each byte of the versions to see if they are the same, + * return at any point a byte differs between them + */ + for (Index = 0; Index < sizeof (XVersion); Index++) { + if (Version1[Index] != Version2[Index]) { + return FALSE; + } + } + + /* No byte was found to be different between the versions, so indicate + * the versions are equal + */ + return TRUE; +} + +/***************************************************************************** +* +* Converts a version to a null terminated string. +* +* @param InstancePtr points to the version to convert. +* @param StringPtr points to the string which will be the result of the +* conversion. This does not need to point to a null terminated +* string as an input, but must point to storage which is an adequate +* amount to hold the result string. +* +* @return +* +* The null terminated string is inserted at the location pointed to by +* StringPtr if the status indicates success. +* +* @note +* +* It is necessary for the caller to have already allocated the storage to +* contain the string. The amount of memory necessary for the string is +* specified in the version header file. +* +******************************************************************************/ +void +XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr) +{ + /* assert to verify input arguments */ + + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(StringPtr != NULL); + + /* since version is implemented as a string, just copy the specified + * input into the specified output + */ + XVersion_Copy(InstancePtr, (XVersion *) StringPtr); +} + +/***************************************************************************** +* +* Initializes a version from a null terminated string. Since the string may not +* be a format which is compatible with the version, an error could occur. +* +* @param InstancePtr points to the version which is to be initialized. +* @param StringPtr points to a null terminated string which will be +* converted to a version. The format of the string must match the +* version string format which is X.YYX where X = 0 - 9, YY = 00 - 99, +* Z = a - z. +* +* @return +* +* A status, XST_SUCCESS, indicating the conversion was accomplished +* successfully, or XST_INVALID_VERSION indicating the version string format +* was not valid. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr) +{ + /* assert to verify input arguments */ + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(StringPtr != NULL); + + /* if the version string specified is not valid, return an error */ + + if (!IsVersionStringValid(StringPtr)) { + return XST_INVALID_VERSION; + } + + /* copy the specified string into the specified version and indicate the + * conversion was successful + */ + XVersion_Copy((XVersion *) StringPtr, InstancePtr); + + return XST_SUCCESS; +} + +/***************************************************************************** +* +* Copies the contents of a version to another version. +* +* @param InstancePtr points to the version which is the source of data for +* the copy operation. +* @param VersionPtr points to another version which is the destination of +* the copy operation. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr) +{ + u8 *Source = (u8 *) InstancePtr; + u8 *Destination = (u8 *) VersionPtr; + int Index; + + /* assert to verify input arguments */ + + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(VersionPtr != NULL); + + /* copy each byte of the source version to the destination version */ + + for (Index = 0; Index < sizeof (XVersion); Index++) { + Destination[Index] = Source[Index]; + } +} + +/***************************************************************************** +* +* Determines if the specified version is valid. +* +* @param StringPtr points to the string to be validated. +* +* @return +* +* TRUE if the version string is a valid format, FALSE otherwise. +* +* @note +* +* None. +* +******************************************************************************/ +static u32 +IsVersionStringValid(s8 * StringPtr) +{ + /* if the input string is not a valid format, "X.YYZ" where X = 0 - 9, + * YY = 00 - 99, and Z = a - z, then indicate it's not valid + */ + if ((StringPtr[XVE_MAJOR_CHAR] < '0') || + (StringPtr[XVE_MAJOR_CHAR] > '9') || + (StringPtr[XVE_MINOR_TENS_CHAR] < '0') || + (StringPtr[XVE_MINOR_TENS_CHAR] > '9') || + (StringPtr[XVE_MINOR_ONES_CHAR] < '0') || + (StringPtr[XVE_MINOR_ONES_CHAR] > '9') || + (StringPtr[XVE_COMP_CHAR] < 'a') || + (StringPtr[XVE_COMP_CHAR] > 'z')) { + return FALSE; + } + + return TRUE; +} diff --git a/board/xilinx/common/xversion.h b/board/xilinx/common/xversion.h new file mode 100644 index 00000000000..17f9da7a021 --- /dev/null +++ b/board/xilinx/common/xversion.h @@ -0,0 +1,97 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/***************************************************************************** +* +* This file contains the interface for the XVersion component. This +* component represents a version ID. It is encapsulated within a component +* so that it's type and implementation can change without affecting users of +* it. +* +* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z +* X is the major revision, YY is the minor revision, and Z is the +* compatability revision. +* +* Packed versions are also utilized for the configuration ROM such that +* memory is minimized. A packed version consumes only 16 bits and is +* formatted as follows. +* +*
+* Revision                  Range       Bit Positions
+*
+* Major Revision            0 - 9       Bits 15 - 12
+* Minor Revision            0 - 99      Bits 11 - 5
+* Compatability Revision    a - z       Bits 4 - 0
+* 
+* +******************************************************************************/ + +#ifndef XVERSION_H /* prevent circular inclusions */ +#define XVERSION_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xstatus.h" + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/* the following data type is used to hold a null terminated version string + * consisting of the following format, "X.YYX" + */ +typedef s8 XVersion[6]; + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +void XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion); + +XStatus XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersion); + +u32 XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr); + +void XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr); + +XStatus XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr); + +void XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr); + +#endif /* end of protection macro */ diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile new file mode 100644 index 00000000000..d9007c02519 --- /dev/null +++ b/board/xilinx/ml300/Makefile @@ -0,0 +1,57 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +CFLAGS += -I../ml300 -I../common -I../xilinx_enet + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o serial.o \ + ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \ + ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \ + ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \ + ../xilinx_enet/xemac_intr_dma.o \ + ../common/xbasic_types.o ../common/xdma_channel.o \ + ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \ + ../common/xversion.o + +SOBJS = init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/xilinx/ml300/config.mk b/board/xilinx/ml300/config.mk new file mode 100644 index 00000000000..57ddb2fd7a5 --- /dev/null +++ b/board/xilinx/ml300/config.mk @@ -0,0 +1,29 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# esd ADCIOP boards +# + +#TEXT_BASE = 0xFFFE0000 +TEXT_BASE = 0x04000000 diff --git a/board/xilinx/ml300/init.S b/board/xilinx/ml300/init.S new file mode 100644 index 00000000000..f753df851aa --- /dev/null +++ b/board/xilinx/ml300/init.S @@ -0,0 +1,48 @@ +/* + * init.S: Stubs for U-Boot initialization + * + * Author: Xilinx, Inc. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A + * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS + * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, + * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE + * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING + * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. + * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO + * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY + * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM + * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. + * + * + * Xilinx hardware products are not intended for use in life support + * appliances, devices, or systems. Use in such applications is + * expressly prohibited. + * + * + * (c) Copyright 2002-2004 Xilinx Inc. + * All rights reserved. + * + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + */ + + .globl ext_bus_cntlr_init +ext_bus_cntlr_init: + blr + + .globl sdram_init +sdram_init: + blr diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c new file mode 100644 index 00000000000..dbe8a8ac749 --- /dev/null +++ b/board/xilinx/ml300/ml300.c @@ -0,0 +1,109 @@ +/* + * ml300.c: U-Boot platform support for Xilinx ML300 board + * + * Author: Xilinx, Inc. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A + * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS + * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, + * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE + * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING + * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. + * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO + * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY + * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM + * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. + * + * + * Xilinx hardware products are not intended for use in life support + * appliances, devices, or systems. Use in such applications is + * expressly prohibited. + * + * + * (c) Copyright 2002-2004 Xilinx Inc. + * All rights reserved. + * + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include "xparameters.h" + +int +board_pre_init(void) +{ + return 0; +} + +int +checkboard(void) +{ + unsigned char *s = getenv("serial#"); + unsigned char *e; + + if (!s || strncmp(s, "ML300", 9)) { + printf("### No HW ID - assuming ML300"); + } else { + for (e = s; *e; ++e) { + if (*e == ' ') + break; + } + + for (; s < e; ++s) { + putc(*s); + } + } + + putc('\n'); + + return (0); +} + +long int +initdram(int board_type) +{ + return 128 * 1024 * 1024; +} + +int +testdram(void) +{ + printf("test: xxx MB - ok\n"); + + return (0); +} + +/* implement functions originally in cpu/ppc4xx/speed.c */ +void +get_sys_info(sys_info_t * sysInfo) +{ + sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + + /* only correct if the PLB and OPB run at the same frequency */ + sysInfo->freqPLB = XPAR_UARTNS550_0_CLOCK_FREQ_HZ; + sysInfo->freqPCI = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 3; +} + +ulong +get_PCI_freq(void) +{ + ulong val; + PPC405_SYS_INFO sys_info; + + get_sys_info(&sys_info); + val = sys_info.freqPCI; + return val; +} diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c new file mode 100644 index 00000000000..19bcc6ff334 --- /dev/null +++ b/board/xilinx/ml300/serial.c @@ -0,0 +1,155 @@ +/* + * Author: Xilinx, Inc. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A + * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS + * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, + * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE + * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING + * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. + * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO + * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY + * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM + * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. + * + * + * Xilinx hardware products are not intended for use in life support + * appliances, devices, or systems. Use in such applications is + * expressly prohibited. + * + * + * (c) Copyright 2002-2004 Xilinx Inc. + * All rights reserved. + * + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include "xparameters.h" + +#define USE_CHAN1 \ + ((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1)) +#define USE_CHAN2 \ + ((defined XPAR_UARTNS550_1_BASEADDR) && (defined CFG_INIT_CHAN2)) + +#if USE_CHAN1 +#include +#endif + +#if USE_CHAN1 +const NS16550_t COM_PORTS[] = { (NS16550_t) (XPAR_UARTNS550_0_BASEADDR + 3) +#if USE_CHAN2 + , (NS16550_t) (XPAR_UARTNS550_1_BASEADDR + 3) +#endif +}; +#endif + +int +serial_init(void) +{ +#if USE_CHAN1 + DECLARE_GLOBAL_DATA_PTR; + int clock_divisor; + + clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate; + (void) NS16550_init(COM_PORTS[0], clock_divisor); +#if USE_CHAN2 + clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate; + (void) NS16550_init(COM_PORTS[1], clock_divisor); +#endif +#endif + return 0; + +} + +void +serial_putc(const char c) +{ + if (c == '\n') + NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r'); + + NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c); +} + +int +serial_getc(void) +{ + return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]); +} + +int +serial_tstc(void) +{ + return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]); +} + +void +serial_setbrg(void) +{ +#if USE_CHAN1 + DECLARE_GLOBAL_DATA_PTR; + int clock_divisor; + + clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate; + NS16550_reinit(COM_PORTS[0], clock_divisor); +#if USE_CHAN2 + clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate; + NS16550_reinit(COM_PORTS[1], clock_divisor); +#endif +#endif +} + +void +serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +void +kgdb_serial_init(void) +{ +} + +void +putDebugChar(int c) +{ + serial_putc(c); +} + +void +putDebugStr(const char *str) +{ + serial_puts(str); +} + +int +getDebugChar(void) +{ + return serial_getc(); +} + +void +kgdb_interruptible(int yes) +{ + return; +} +#endif /* CFG_CMD_KGDB */ diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes new file mode 100644 index 00000000000..319b925d36a --- /dev/null +++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes @@ -0,0 +1,41 @@ +#!/bin/bash + +if[$ +# -ne 1 ] + then echo "usage: Ltypes filename" > &2 exit 2 fi FILE = "$1" +#TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1 + TMPFILE = $ { + FILE} + + . ` date "+%s" ` touch $TMPFILE || exit 1 +# Change all the Xilinx types to Linux types and put the result into a temp file + sed + - e 's/\bXTRUE\b/TRUE/g' + - e 's/\bXFALSE\b/FALSE/g' + - e 's/\bXNULL\b/NULL/g' + - e 's///g' + - e 's/\bXENV_USLEEP\b/udelay/g' + - e 's/\bXuint8\b/u8/g' + - e 's/\bXuint16\b/u16/g' + - e 's/\bXuint32\b/u32/g' + - e 's/\bXint8\b/s8/g' + - e 's/\bXint16\b/s16/g' + - e 's/\bXint32\b/s32/g' - e 's/\bXboolean\b/u32/g' "${FILE}" > "${TMPFILE}" +# Overlay the original file with the temp file + mv "${TMPFILE}" "${FILE}" +# Are we doing xbasic_types.h? + if["${FILE##*/}" = xbasic_types.h] + then +# Remember as you're reading this that we've already gone through the prior +# sed script. We need to do some other things to xbasic_types.h: +# 1) Add ifndefs around TRUE and FALSE defines +# 2) Remove definition of NULL as NULL +# 3) Replace most of the primitive types section with a #include + sed - e '/u32 true/,/#define false/Ic\ +#ifndef TRUE\ +#define TRUE 1\ +#endif\ +#ifndef FALSE\ +#define FALSE 0\ +#endif' - e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' - e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\ +#include ' "${FILE}" > "${TMPFILE}" mv "${TMPFILE}" "${FILE}" fi diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld new file mode 100644 index 00000000000..e1aa7fd59d7 --- /dev/null +++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld @@ -0,0 +1,48 @@ +# (c) Copyright 2004 Xilinx Inc. +# Author: Xilinx, Inc. +# +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; either version 2 of the License, or (at your +# option) any later version. +# +# +# XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +# COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +# ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +# XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +# FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +# ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +# XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +# THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +# WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +# CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +# FITNESS FOR A PARTICULAR PURPOSE. +# +# +# Xilinx hardware products are not intended for use in life support +# appliances, devices, or systems. Use in such applications is +# expressly prohibited. +# +# +# (c) Copyright 2002-2004 Xilinx Inc. +# All rights reserved. +# +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 675 Mass Ave, Cambridge, MA 02139, USA. + +OPTION psf_version = 2.1; + +BEGIN LIBRARY uboot OPTION DRC = uboot_drc; + +BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot"; +PROPERTY size = 0; +PARAM name = periph_name, desc = "Name of Peripheral connected", type = string; +END ARRAY + PARAMETER name = TARGET_DIR, desc = + "Target Directory for U-Boot BSP", type = string; + +END LIBRARY diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl new file mode 100644 index 00000000000..8d939b4162f --- /dev/null +++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl @@ -0,0 +1,298 @@ +# +# Author: Xilinx, Inc. +# +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; either version 2 of the License, or (at your +# option) any later version. +# +# +# XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +# COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +# ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +# XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +# FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +# ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +# XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +# THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +# WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +# CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +# FITNESS FOR A PARTICULAR PURPOSE. +# +# +# Xilinx hardware products are not intended for use in life support +# appliances, devices, or systems. Use in such applications is +# expressly prohibited. +# +# +# (c) Copyright 2002-2004 Xilinx Inc. +# All rights reserved. +# +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 675 Mass Ave, Cambridge, MA 02139, USA. +# +# Globals +lappend drvlist +set ltypes "../../../sw_services/uboot_v1_00_a/data/Ltypes" + +proc uboot_drc {lib_handle} { + puts "U-Boot DRC..." +} + +proc generate {libname} { + + global drvlist + + # Get list of peripherals connected to uboot + set conn_periphs [xget_handle $libname "ARRAY" "connected_periphs"] + #lappend drvlist + if {[string compare -nocase $conn_periphs ""] != 0} { + set conn_periphs_elems [xget_handle $conn_periphs "ELEMENTS" "*"] + # For each periph + foreach periph_elem $conn_periphs_elems { + set periph [xget_value $periph_elem "PARAMETER" "periph_name"] + # 1. Get driver + set drv [xget_swhandle $periph] + set posn [lsearch -exact $drvlist $drv] + if {$posn == -1} { + lappend drvlist $drv + } + } + + set file_handle [xopen_include_file "xparameters.h"] + puts $file_handle "\n/******************************************************************/\n" + puts $file_handle "/* U-Boot Redefines */" + puts $file_handle "\n/******************************************************************/\n" + close $file_handle + + foreach drv $drvlist { + set drvname [xget_value $drv "NAME"] + + #Redefines xparameters.h + if {[string compare -nocase $drvname "uartns550"] == 0} { + xredefine_uartns550 $drv "xparameters.h" + } elseif {[string compare -nocase $drvname "emac"] == 0} { + xredefine_emac $drv "xparameters.h" + } + } + } + + # define core_clock + xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ" +} + +proc xget_corefreq {} { + set processor [xget_processor] + set name [xget_value $processor "NAME"] + puts "procname : $name" + set processor_driver [xget_swhandle [xget_value $processor "NAME"]] + puts "procdrv : $processor_driver" + if {[string compare -nocase $processor_driver ""] != 0} { + set arg "CORE_CLOCK_FREQ_HZ" + #set retval [xget_value $processor_driver "PARAMETER" $arg] + set retval [xget_dname [xget_value $processor_driver "NAME"] $arg] + return $retval + } +} + +# procedure that adds # defines to xparameters.h as XPAR_argument +proc xredefine_params {handle file_name args} { + + puts "xredfine ..." + # Open include file + set file_handle [xopen_include_file $file_name] + puts "args : $args" + + foreach arg $args { + if {[string compare -nocase $arg "CORE_CLOCK_FREQ_HZ"] == 0} { + set value [xget_corefreq] + puts "corefreq : $value" + } else { + set value [xget_value $handle "PARAMETER" $arg] + puts "value : $value" + } + + if {$value != ""} { + set value [xformat_addr_string $value $arg] + set name [string toupper $arg] + set name [format "XPAR_%s" $name] + puts $file_handle "#define $name $value" + } + } + + puts $file_handle "\n/******************************************************************/\n" + close $file_handle +} + +# uart redefines... +proc xredefine_uartns550 {drvhandle file_name} { + + xredefine_include_file $drvhandle $file_name "uartns550" "C_BASEADDR" "C_HIGHADDR" "CLOCK_HZ" "DEVICE_ID" + +} + +proc xredefine_emac {drvhandle file_name} { + + xredefine_include_file $drvhandle $file_name "emac" "C_BASEADDR" "C_HIGHADDR" "C_DMA_PRESENT" "C_MII_EXIST" "C_ERR_COUNT_EXIST" "DEVICE_ID" + +} + +####################### + +proc xredefine_include_file {drv_handle file_name drv_string args} { + + # Open include file + set file_handle [xopen_include_file $file_name] + + # Get all peripherals connected to this driver + set periphs [xget_periphs $drv_handle] + + set pname [format "XPAR_%s_" [string toupper $drv_string]] + + # Print all parameters for all peripherals + set device_id 0 + set sub_periphs 1 + foreach periph $periphs { + puts "$periph : $drv_string : $sub_periphs" + + for {set i 0} {$i < $sub_periphs} {incr i} { + foreach arg $args { + set name "${pname}${device_id}_" + + if {[string compare -nocase "CLOCK_HZ" $arg] == 0} { + set xdrv_string [format "%s%s" "X" $drv_string] + set value [xget_dname $xdrv_string $arg] + set name "${name}CLOCK_FREQ_HZ" + } else { + if {[string match C_* $arg]} { + set name [format "%s%s" $name [string range $arg 2 end]] + } else { + set name "${name}${arg}" + } + set value [xget_name $periph $arg] + } + + if {[string compare -nocase "uartns550" $drv_string] == 0} { + if {[string compare -nocase "C_BASEADDR" $arg] == 0} { + set value [format "(%s%s%s)" $value "+" "0x1000"] + } + } + + puts $file_handle "#define $name $value" + if {[string compare -nocase "DEVICE_ID" $arg] == 0} { + incr device_id + } + } + } + } + puts $file_handle "\n/******************************************************************/\n" + close $file_handle +} + +################################################## +# procedure post_generate +# This generates the drivers directory for uboot +# and runs the ltypes script +################################################## + +proc post_generate {lib_handle} { + + global drvlist + + # Create U-Boot tree structure + set pwd [pwd] + set common_dir "uboot/board/xilinx/common" + set xilinx_enet_dir "uboot/board/xilinx/xilinx_enet" + set ml300_dir "uboot/board/xilinx/ml300" + + exec bash -c "mkdir -p $common_dir $xilinx_enet_dir $ml300_dir" + + # Copy files for xilinx_ocp + xcopy_commonfiles + + foreach drv $drvlist { + set drvname [xget_value $drv "NAME"] + set ver [xget_value $drv "PARAMETER" "DRIVER_VER"] + set ver [string map {. _} $ver] + set dirname [format "%s_v%s" $drvname $ver] + + if {[string compare -nocase $drvname "emac"] == 0} { + xcopy_emac $drv $dirname + } + } + + # Call Ltypes Script here + set uboot "uboot" + xltype_file $uboot + + # Move xparameters.h around + exec bash -c "cp ../../include/xparameters.h $ml300_dir" + + # copy the whole U-Boot BSP to its final destination + set value [xget_value $lib_handle "PARAMETER" TARGET_DIR] + puts "TARGET_DIR : $value" + + if {$value != ""} { + if {[file isdirectory $value] == 0} { + exec bash -c "mkdir -p $value" + } + exec bash -c "cp -Rp uboot/* $value" + } +} + +proc xcopy_commonfiles {} { + + global drvlist + + set common_dir "uboot/board/xilinx/common" + + foreach drv $drvlist { + set depends [xget_value $drv "OPTION" "DEPENDS"] + foreach dep $depends { + puts "dep : $dep" + if {[file isdirectory "../$dep"] == 1} { + exec bash -c "cp -f ../$dep/src/*.c $common_dir" + exec bash -c "cp -f ../$dep/src/*.h $common_dir" + } + } + } + +} + +proc xcopy_emac {drv_handle dirname} { + set emac "board/xilinx/xilinx_enet" + xcopy_dir $dirname $emac +} + +proc xcopy_dir {srcdir dstdir} { + + set dstdirname [format "%s%s" "uboot/" $dstdir] + if {[file isdirectory "../$srcdir"] == 1} { + # Copy files from src to dst + exec bash -c "mkdir -p $dstdirname" + exec bash -c "cp -f ../$srcdir/src/*.c $dstdirname" + exec bash -c "cp -f ../$srcdir/src/*.h $dstdirname" + } else { + puts "$srcdir does not exist ..." + } +} + + +proc xltype_file {filename} { + + global ltypes + + puts $filename + + if {[file isdirectory $filename]} { + foreach entry [glob -nocomplain [file join $filename *]] { + xltype_file $entry + } + } else { + exec bash -c "$ltypes $filename" + } + +} diff --git a/board/xilinx/ml300/u-boot.lds b/board/xilinx/ml300/u-boot.lds new file mode 100644 index 00000000000..e7b7e107b06 --- /dev/null +++ b/board/xilinx/ml300/u-boot.lds @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +ENTRY(_start) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ +/* + cpu/ppc4xx/start.o (.text) + board/xilinx/ml300/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + cpu/ppc4xx/405gp_enet.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) +*/ +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xilinx/ml300/u-boot.lds.debug b/board/xilinx/ml300/u-boot.lds.debug new file mode 100644 index 00000000000..d483424ad6d --- /dev/null +++ b/board/xilinx/ml300/u-boot.lds.debug @@ -0,0 +1,135 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + mpc8xx/start.o (.text) + common/dlmalloc.o (.text) + lib_generic/vsprintf.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + + common/environment.o(.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xilinx/ml300/xparameters.h b/board/xilinx/ml300/xparameters.h new file mode 100644 index 00000000000..c6362562b54 --- /dev/null +++ b/board/xilinx/ml300/xparameters.h @@ -0,0 +1,216 @@ +/******************************************************************* +* +* CAUTION: This file is automatically generated by libgen. +* Version: Xilinx EDK 6.1.2 EDK_G.14 +* DO NOT EDIT. +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +* Description: Driver parameters +* +*******************************************************************/ + +#define XPAR_XPCI_NUM_INSTANCES 1 +#define XPAR_XPCI_CLOCK_HZ 33333333 +#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0 +#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000 +#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF +#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000 +#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004 +#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000 +#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000 +#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF +#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000 +#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF + +/******************************************************************/ + +#define XPAR_XEMAC_NUM_INSTANCES 1 +#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000 +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF +#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 +#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 +#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 +#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 + +/******************************************************************/ + +#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0 +#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000 +#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7) +#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1 +#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8) +#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F) +#define XPAR_XGPIO_NUM_INSTANCES 2 + +/******************************************************************/ + +#define XPAR_XIIC_NUM_INSTANCES 1 +#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000 +#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF +#define XPAR_OPB_IIC_0_DEVICE_ID 0 +#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0 + +/******************************************************************/ + +#define XPAR_XUARTNS550_NUM_INSTANCES 2 +#define XPAR_XUARTNS550_CLOCK_HZ 100000000 +#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000 +#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF +#define XPAR_OPB_UART16550_0_DEVICE_ID 0 +#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000 +#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF +#define XPAR_OPB_UART16550_1_DEVICE_ID 1 + +/******************************************************************/ + +#define XPAR_XSPI_NUM_INSTANCES 1 +#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000 +#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F +#define XPAR_OPB_SPI_0_DEVICE_ID 0 +#define XPAR_OPB_SPI_0_FIFO_EXIST 1 +#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0 +#define XPAR_OPB_SPI_0_NUM_SS_BITS 1 + +/******************************************************************/ + +#define XPAR_XPS2_NUM_INSTANCES 2 +#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0 +#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000 +#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F) +#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1 +#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000) +#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F) + +/******************************************************************/ + +#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1 +#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000 +#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007 +#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0 + +/******************************************************************/ + +#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000 +#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF +#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000 +#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF +#define XPAR_PLB_DDR_0_BASEADDR 0x00000000 +#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF + +/******************************************************************/ + +#define XPAR_XINTC_HAS_IPR 1 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18 +#define XPAR_XINTC_USE_DCR 0 +#define XPAR_XINTC_NUM_INSTANCES 1 +#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0 +#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF +#define XPAR_DCR_INTC_0_DEVICE_ID 0 +#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000 + +/******************************************************************/ + +#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0 +#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1 +#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2 +#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3 +#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4 +#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5 +#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6 +#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7 +#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8 +#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9 +#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10 +#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11 +#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12 +#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13 +#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14 +#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15 +#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16 +#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17 + +/******************************************************************/ + +#define XPAR_XTFT_NUM_INSTANCES 1 +#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200 +#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207 +#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0 + +/******************************************************************/ + +#define XPAR_XSYSACE_MEM_WIDTH 8 +#define XPAR_XSYSACE_NUM_INSTANCES 1 +#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000 +#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF +#define XPAR_OPB_SYSACE_0_DEVICE_ID 0 +#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8 + +/******************************************************************/ + +#define STDIN_BASEADDRESS 0xA0000000 +#define STDOUT_BASEADDRESS 0xA0000000 +#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000 + +/******************************************************************/ + +/* U-Boot Redefines */ + +/******************************************************************/ + +#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000) +#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ +#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID +#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000) +#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR +#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ +#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID + +/******************************************************************/ + +#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR +#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR +#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT +#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST +#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST +#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ + +/******************************************************************/ diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c new file mode 100644 index 00000000000..a3c37baab9c --- /dev/null +++ b/board/xilinx/xilinx_enet/emac_adapter.c @@ -0,0 +1,153 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ + +#include +#include +#include +#include "xparameters.h" +#include "xemac.h" + +#if defined(XPAR_EMAC_0_DEVICE_ID) +/* + * ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from + * PKTSIZE and PKTSIZE_ALIGN (include/net.h) + */ + +#define ENET_MAX_MTU PKTSIZE +#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN +#define ENET_ADDR_LENGTH 6 + +static XEmac Emac; +static char etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */ + +/* hardcoded MAC address for the Xilinx EMAC Core */ +static u8 EMACAddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 }; + +static int initialized = 0; + +void +eth_halt(void) +{ + if (initialized) + (void) XEmac_Stop(&Emac); +} + +int +eth_init(bd_t * bis) +{ + u32 Options; + XStatus Result; + +#ifdef DEBUG + printf("EMAC Initialization Started\n\r"); +#endif + + Result = XEmac_Initialize(&Emac, XPAR_EMAC_0_DEVICE_ID); + if (Result != XST_SUCCESS) { + return 0; + } + + /* make sure the Emac is stopped before it is started */ + (void) XEmac_Stop(&Emac); + + memcpy(bis->bi_enetaddr, EMACAddr, 6); + Result = XEmac_SetMacAddress(&Emac, EMACAddr); + if (Result != XST_SUCCESS) { + return 0; + } + + Options = + (XEM_POLLED_OPTION | XEM_UNICAST_OPTION | XEM_BROADCAST_OPTION | + XEM_FDUPLEX_OPTION | XEM_INSERT_FCS_OPTION | + XEM_INSERT_PAD_OPTION); + Result = XEmac_SetOptions(&Emac, Options); + if (Result != XST_SUCCESS) { + return 0; + } + + Result = XEmac_Start(&Emac); + if (Result != XST_SUCCESS) { + return 0; + } +#ifdef DEBUG + printf("EMAC Initialization complete\n\r"); +#endif + + initialized = 1; + + return (0); +} + +/*-----------------------------------------------------------------------------+ ++-----------------------------------------------------------------------------*/ +int +eth_send(volatile void *ptr, int len) +{ + XStatus Result; + + if (len > ENET_MAX_MTU) + len = ENET_MAX_MTU; + + Result = XEmac_PollSend(&Emac, (u8 *) ptr, len); + if (Result == XST_SUCCESS) { + return (1); + } else { + printf("Error while sending frame\n\r"); + return (0); + } + +} + +int +eth_rx(void) +{ + u32 RecvFrameLength; + XStatus Result; + + RecvFrameLength = PKTSIZE; + Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength); + if (Result == XST_SUCCESS) { + NetReceive(etherrxbuff, RecvFrameLength); + return (1); + } else { + return (0); + } +} + +#endif diff --git a/board/xilinx/xilinx_enet/xemac.c b/board/xilinx/xilinx_enet/xemac.c new file mode 100644 index 00000000000..48b4ede704d --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac.c @@ -0,0 +1,844 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac.c +* +* The XEmac driver. Functions in this file are the minimum required functions +* for this driver. See xemac.h for a detailed description of the driver. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rpm  07/31/01 First release
+* 1.00b rpm  02/20/02 Repartitioned files and functions
+* 1.00b rpm  07/23/02 Removed the PHY reset from Initialize()
+* 1.00b rmm  09/23/02 Removed commented code in Initialize(). Recycled as
+*                     XEmac_mPhyReset macro in xemac_l.h.
+* 1.00c rpm  12/05/02 New version includes support for simple DMA
+* 1.00c rpm  12/12/02 Changed location of IsStarted assignment in XEmac_Start
+*                     to be sure the flag is set before the device and
+*                     interrupts are enabled.
+* 1.00c rpm  02/03/03 SelfTest was not clearing polled mode. Take driver out
+*                     of polled mode in XEmac_Reset() to fix this problem.
+* 1.00c rmm  05/13/03 Fixed diab compiler warnings relating to asserts.
+* 
+******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xemac_i.h" +#include "xio.h" +#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */ + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +static XStatus ConfigureDma(XEmac * InstancePtr); +static XStatus ConfigureFifo(XEmac * InstancePtr); +static void StubFifoHandler(void *CallBackRef); +static void StubErrorHandler(void *CallBackRef, XStatus ErrorCode); +static void StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr, + u32 NumBds); + +/************************** Variable Definitions *****************************/ + +/*****************************************************************************/ +/** +* +* Initialize a specific XEmac instance/driver. The initialization entails: +* - Initialize fields of the XEmac structure +* - Clear the Ethernet statistics for this device +* - Initialize the IPIF component with its register base address +* - Configure the FIFO components with their register base addresses. +* - If the device is configured with DMA, configure the DMA channel components +* with their register base addresses. At some later time, memory pools for +* the scatter-gather descriptor lists may be passed to the driver. +* - Reset the Ethernet MAC +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param DeviceId is the unique id of the device controlled by this XEmac +* instance. Passing in a device id associates the generic XEmac +* instance to a specific device, as chosen by the caller or application +* developer. +* +* @return +* +* - XST_SUCCESS if initialization was successful +* - XST_DEVICE_IS_STARTED if the device has already been started +* - XST_DEVICE_NOT_FOUND if device configuration information was not found for +* a device with the supplied device ID. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId) +{ + XStatus Result; + XEmac_Config *ConfigPtr; /* configuration information */ + + XASSERT_NONVOID(InstancePtr != NULL); + + /* + * If the device is started, disallow the initialize and return a status + * indicating it is started. This allows the user to stop the device + * and reinitialize, but prevents a user from inadvertently initializing + */ + if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STARTED; + } + + /* + * Lookup the device configuration in the temporary CROM table. Use this + * configuration info down below when initializing this component. + */ + ConfigPtr = XEmac_LookupConfig(DeviceId); + if (ConfigPtr == NULL) { + return XST_DEVICE_NOT_FOUND; + } + + /* + * Set some default values + */ + InstancePtr->IsReady = 0; + InstancePtr->IsStarted = 0; + InstancePtr->IpIfDmaConfig = ConfigPtr->IpIfDmaConfig; + InstancePtr->HasMii = ConfigPtr->HasMii; + InstancePtr->HasMulticastHash = FALSE; + + /* Always default polled to false, let user configure this mode */ + InstancePtr->IsPolled = FALSE; + InstancePtr->FifoRecvHandler = StubFifoHandler; + InstancePtr->FifoSendHandler = StubFifoHandler; + InstancePtr->ErrorHandler = StubErrorHandler; + InstancePtr->SgRecvHandler = StubSgHandler; + InstancePtr->SgSendHandler = StubSgHandler; + + /* + * Clear the statistics for this driver + */ + XEmac_mClearStruct((u8 *) & InstancePtr->Stats, sizeof (XEmac_Stats)); + + /* + * Initialize the device register base addresses + */ + InstancePtr->BaseAddress = ConfigPtr->BaseAddress; + + /* + * Configure the send and receive FIFOs in the MAC + */ + Result = ConfigureFifo(InstancePtr); + if (Result != XST_SUCCESS) { + return Result; + } + + /* + * If the device is configured for DMA, configure the send and receive DMA + * channels in the MAC. + */ + if (XEmac_mIsDma(InstancePtr)) { + Result = ConfigureDma(InstancePtr); + if (Result != XST_SUCCESS) { + return Result; + } + } + + /* + * Indicate the component is now ready to use. Note that this is done before + * we reset the device and the PHY below, which may seem a bit odd. The + * choice was made to move it here rather than remove the asserts in various + * functions (e.g., Reset() and all functions that it calls). Applications + * that use multiple threads, one to initialize the XEmac driver and one + * waiting on the IsReady condition could have a problem with this sequence. + */ + InstancePtr->IsReady = XCOMPONENT_IS_READY; + + /* + * Reset the MAC to get it into its initial state. It is expected that + * device configuration by the user will take place after this + * initialization is done, but before the device is started. + */ + XEmac_Reset(InstancePtr); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Start the Ethernet controller as follows: +* - If not in polled mode +* - Set the internal interrupt enable registers appropriately +* - Enable interrupts within the device itself. Note that connection of +* the driver's interrupt handler to the interrupt source (typically +* done using the interrupt controller component) is done by the higher +* layer software. +* - If the device is configured with scatter-gather DMA, start the DMA +* channels if the descriptor lists are not empty +* - Enable the transmitter +* - Enable the receiver +* +* The PHY is enabled after driver initialization. We assume the upper layer +* software has configured it and the EMAC appropriately before this function +* is called. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* - XST_SUCCESS if the device was started successfully +* - XST_NO_CALLBACK if a callback function has not yet been registered using +* the SetxxxHandler function. This is required if in interrupt mode. +* - XST_DEVICE_IS_STARTED if the device is already started +* - XST_DMA_SG_NO_LIST if configured for scatter-gather DMA and a descriptor +* list has not yet been created for the send or receive channel. +* +* @note +* +* The driver tries to match the hardware configuration. So if the hardware +* is configured with scatter-gather DMA, the driver expects to start the +* scatter-gather channels and expects that the user has set up the buffer +* descriptor lists already. If the user expects to use the driver in a mode +* different than how the hardware is configured, the user should modify the +* configuration table to reflect the mode to be used. Modifying the config +* table is a workaround for now until we get some experience with how users +* are intending to use the hardware in its different configurations. For +* example, if the hardware is built with scatter-gather DMA but the user is +* intending to use only simple DMA, the user either needs to modify the config +* table as a workaround or rebuild the hardware with only simple DMA. +* +* This function makes use of internal resources that are shared between the +* Start, Stop, and SetOptions functions. So if one task might be setting device +* options while another is trying to start the device, the user is required to +* provide protection of this shared data (typically using a semaphore). +* +******************************************************************************/ +XStatus +XEmac_Start(XEmac * InstancePtr) +{ + u32 ControlReg; + XStatus Result; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * If it is already started, return a status indicating so + */ + if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STARTED; + } + + /* + * If not polled, enable interrupts + */ + if (!InstancePtr->IsPolled) { + /* + * Verify that the callbacks have been registered, then enable + * interrupts + */ + if (XEmac_mIsSgDma(InstancePtr)) { + if ((InstancePtr->SgRecvHandler == StubSgHandler) || + (InstancePtr->SgSendHandler == StubSgHandler)) { + return XST_NO_CALLBACK; + } + + /* Enable IPIF interrupts */ + XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress, + XEM_IPIF_DMA_DFT_MASK | + XIIF_V123B_ERROR_MASK); + XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress, + XEM_EIR_DFT_SG_MASK); + + /* Enable scatter-gather DMA interrupts */ + XDmaChannel_SetIntrEnable(&InstancePtr->RecvChannel, + XEM_DMA_SG_INTR_MASK); + XDmaChannel_SetIntrEnable(&InstancePtr->SendChannel, + XEM_DMA_SG_INTR_MASK); + } else { + if ((InstancePtr->FifoRecvHandler == StubFifoHandler) || + (InstancePtr->FifoSendHandler == StubFifoHandler)) { + return XST_NO_CALLBACK; + } + + /* Enable IPIF interrupts (used by simple DMA also) */ + XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress, + XEM_IPIF_FIFO_DFT_MASK | + XIIF_V123B_ERROR_MASK); + XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress, + XEM_EIR_DFT_FIFO_MASK); + } + + /* Enable the global IPIF interrupt output */ + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + } + + /* + * Indicate that the device is started before we enable the transmitter + * or receiver. This needs to be done before because as soon as the + * receiver is enabled we may get an interrupt, and there are functions + * in the interrupt handling path that rely on the IsStarted flag. + */ + InstancePtr->IsStarted = XCOMPONENT_IS_STARTED; + + /* + * Enable the transmitter, and receiver (do a read/modify/write to preserve + * current settings). There is no critical section here since this register + * is not modified during interrupt context. + */ + ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET); + ControlReg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); + ControlReg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); + + XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg); + + /* + * If configured with scatter-gather DMA and not polled, restart the + * DMA channels in case there are buffers ready to be sent or received into. + * The DMA SgStart function uses data that can be modified during interrupt + * context, so a critical section is required here. + */ + if ((XEmac_mIsSgDma(InstancePtr)) && (!InstancePtr->IsPolled)) { + XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress); + + /* + * The only error we care about is if the list has not yet been + * created, or on receive, if no buffer descriptors have been + * added yet (the list is empty). Other errors are benign at this point. + */ + Result = XDmaChannel_SgStart(&InstancePtr->RecvChannel); + if ((Result == XST_DMA_SG_NO_LIST) + || (Result == XST_DMA_SG_LIST_EMPTY)) { + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + return Result; + } + + Result = XDmaChannel_SgStart(&InstancePtr->SendChannel); + if (Result == XST_DMA_SG_NO_LIST) { + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + return Result; + } + + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + } + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Stop the Ethernet MAC as follows: +* - If the device is configured with scatter-gather DMA, stop the DMA +* channels (wait for acknowledgment of stop) +* - Disable the transmitter and receiver +* - Disable interrupts if not in polled mode (the higher layer software is +* responsible for disabling interrupts at the interrupt controller) +* +* The PHY is left enabled after a Stop is called. +* +* If the device is configured for scatter-gather DMA, the DMA engine stops at +* the next buffer descriptor in its list. The remaining descriptors in the list +* are not removed, so anything in the list will be transmitted or received when +* the device is restarted. The side effect of doing this is that the last +* buffer descriptor processed by the DMA engine before stopping may not be the +* last descriptor in the Ethernet frame. So when the device is restarted, a +* partial frame (i.e., a bad frame) may be transmitted/received. This is only a +* concern if a frame can span multiple buffer descriptors, which is dependent +* on the size of the network buffers. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* - XST_SUCCESS if the device was stopped successfully +* - XST_DEVICE_IS_STOPPED if the device is already stopped +* +* @note +* +* This function makes use of internal resources that are shared between the +* Start, Stop, and SetOptions functions. So if one task might be setting device +* options while another is trying to start the device, the user is required to +* provide protection of this shared data (typically using a semaphore). +* +******************************************************************************/ +XStatus +XEmac_Stop(XEmac * InstancePtr) +{ + u32 ControlReg; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * If the device is already stopped, do nothing but return a status + * indicating so + */ + if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STOPPED; + } + + /* + * If configured for scatter-gather DMA, stop the DMA channels. Ignore + * the XST_DMA_SG_IS_STOPPED return code. There is a critical section + * here between SgStart and SgStop, and SgStart can be called in interrupt + * context, so disable interrupts while calling SgStop. + */ + if (XEmac_mIsSgDma(InstancePtr)) { + XBufDescriptor *BdTemp; /* temporary descriptor pointer */ + + XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress); + + (void) XDmaChannel_SgStop(&InstancePtr->SendChannel, &BdTemp); + (void) XDmaChannel_SgStop(&InstancePtr->RecvChannel, &BdTemp); + + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + } + + /* + * Disable the transmitter and receiver. There is no critical section + * here since this register is not modified during interrupt context. + */ + ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET); + ControlReg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); + XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg); + + /* + * If not in polled mode, disable interrupts for IPIF (includes MAC and + * DMAs) + */ + if (!InstancePtr->IsPolled) { + XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress); + } + + InstancePtr->IsStarted = 0; + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Reset the Ethernet MAC. This is a graceful reset in that the device is stopped +* first. Resets the DMA channels, the FIFOs, the transmitter, and the receiver. +* The PHY is not reset. Any frames in the scatter-gather descriptor lists will +* remain in the lists. The side effect of doing this is that after a reset and +* following a restart of the device, frames that were in the list before the +* reset may be transmitted or received. Reset must only be called after the +* driver has been initialized. +* +* The driver is also taken out of polled mode if polled mode was set. The user +* is responsbile for re-configuring the driver into polled mode after the +* reset if desired. +* +* The configuration after this reset is as follows: +* - Half duplex +* - Disabled transmitter and receiver +* - Enabled PHY (the PHY is not reset) +* - MAC transmitter does pad insertion, FCS insertion, and source address +* overwrite. +* - MAC receiver does not strip padding or FCS +* - Interframe Gap as recommended by IEEE Std. 802.3 (96 bit times) +* - Unicast addressing enabled +* - Broadcast addressing enabled +* - Multicast addressing disabled (addresses are preserved) +* - Promiscuous addressing disabled +* - Default packet threshold and packet wait bound register values for +* scatter-gather DMA operation +* - MAC address of all zeros +* - Non-polled mode +* +* The upper layer software is responsible for re-configuring (if necessary) +* and restarting the MAC after the reset. Note that the PHY is not reset. PHY +* control is left to the upper layer software. Note also that driver statistics +* are not cleared on reset. It is up to the upper layer software to clear the +* statistics if needed. +* +* When a reset is required due to an internal error, the driver notifies the +* upper layer software of this need through the ErrorHandler callback and +* specific status codes. The upper layer software is responsible for calling +* this Reset function and then re-configuring the device. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* None. +* +* @note +* +* None. +* +* @internal +* +* The reset is accomplished by setting the IPIF reset register. This takes +* care of resetting all hardware blocks, including the MAC. +* +******************************************************************************/ +void +XEmac_Reset(XEmac * InstancePtr) +{ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Stop the device first + */ + (void) XEmac_Stop(InstancePtr); + + /* + * Take the driver out of polled mode + */ + InstancePtr->IsPolled = FALSE; + + /* + * Reset the entire IPIF at once. If we choose someday to reset each + * hardware block separately, the reset should occur in the direction of + * data flow. For example, for the send direction the reset order is DMA + * first, then FIFO, then the MAC transmitter. + */ + XIIF_V123B_RESET(InstancePtr->BaseAddress); + + if (XEmac_mIsSgDma(InstancePtr)) { + /* + * After reset, configure the scatter-gather DMA packet threshold and + * packet wait bound registers to default values. Ignore the return + * values of these functions since they only return error if the device + * is not stopped. + */ + (void) XEmac_SetPktThreshold(InstancePtr, XEM_SEND, + XEM_SGDMA_DFT_THRESHOLD); + (void) XEmac_SetPktThreshold(InstancePtr, XEM_RECV, + XEM_SGDMA_DFT_THRESHOLD); + (void) XEmac_SetPktWaitBound(InstancePtr, XEM_SEND, + XEM_SGDMA_DFT_WAITBOUND); + (void) XEmac_SetPktWaitBound(InstancePtr, XEM_RECV, + XEM_SGDMA_DFT_WAITBOUND); + } +} + +/*****************************************************************************/ +/** +* +* Set the MAC address for this driver/device. The address is a 48-bit value. +* The device must be stopped before calling this function. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param AddressPtr is a pointer to a 6-byte MAC address. +* +* @return +* +* - XST_SUCCESS if the MAC address was set successfully +* - XST_DEVICE_IS_STARTED if the device has not yet been stopped +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr) +{ + u32 MacAddr = 0; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(AddressPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * The device must be stopped before setting the MAC address + */ + if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STARTED; + } + + /* + * Set the device station address high and low registers + */ + MacAddr = (AddressPtr[0] << 8) | AddressPtr[1]; + XIo_Out32(InstancePtr->BaseAddress + XEM_SAH_OFFSET, MacAddr); + + MacAddr = (AddressPtr[2] << 24) | (AddressPtr[3] << 16) | + (AddressPtr[4] << 8) | AddressPtr[5]; + + XIo_Out32(InstancePtr->BaseAddress + XEM_SAL_OFFSET, MacAddr); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Get the MAC address for this driver/device. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param BufferPtr is an output parameter, and is a pointer to a buffer into +* which the current MAC address will be copied. The buffer must be at +* least 6 bytes. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr) +{ + u32 MacAddrHi; + u32 MacAddrLo; + + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(BufferPtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + MacAddrHi = XIo_In32(InstancePtr->BaseAddress + XEM_SAH_OFFSET); + MacAddrLo = XIo_In32(InstancePtr->BaseAddress + XEM_SAL_OFFSET); + + BufferPtr[0] = (u8) (MacAddrHi >> 8); + BufferPtr[1] = (u8) MacAddrHi; + BufferPtr[2] = (u8) (MacAddrLo >> 24); + BufferPtr[3] = (u8) (MacAddrLo >> 16); + BufferPtr[4] = (u8) (MacAddrLo >> 8); + BufferPtr[5] = (u8) MacAddrLo; +} + +/******************************************************************************/ +/** +* +* Configure DMA capabilities. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* - XST_SUCCESS if successful initialization of DMA +* +* @note +* +* None. +* +******************************************************************************/ +static XStatus +ConfigureDma(XEmac * InstancePtr) +{ + XStatus Result; + + /* + * Initialize the DMA channels with their base addresses. We assume + * scatter-gather DMA is the only possible configuration. Descriptor space + * will need to be set later by the upper layer. + */ + Result = XDmaChannel_Initialize(&InstancePtr->RecvChannel, + InstancePtr->BaseAddress + + XEM_DMA_RECV_OFFSET); + if (Result != XST_SUCCESS) { + return Result; + } + + Result = XDmaChannel_Initialize(&InstancePtr->SendChannel, + InstancePtr->BaseAddress + + XEM_DMA_SEND_OFFSET); + + return Result; +} + +/******************************************************************************/ +/** +* +* Configure the send and receive FIFO components with their base addresses +* and interrupt masks. Currently the base addresses are defined constants. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* XST_SUCCESS if successful initialization of the packet FIFOs +* +* @note +* +* None. +* +******************************************************************************/ +static XStatus +ConfigureFifo(XEmac * InstancePtr) +{ + XStatus Result; + + /* + * Return status from the packet FIFOs initialization is ignored since + * they always return success. + */ + Result = XPacketFifoV100b_Initialize(&InstancePtr->RecvFifo, + InstancePtr->BaseAddress + + XEM_PFIFO_RXREG_OFFSET, + InstancePtr->BaseAddress + + XEM_PFIFO_RXDATA_OFFSET); + if (Result != XST_SUCCESS) { + return Result; + } + + Result = XPacketFifoV100b_Initialize(&InstancePtr->SendFifo, + InstancePtr->BaseAddress + + XEM_PFIFO_TXREG_OFFSET, + InstancePtr->BaseAddress + + XEM_PFIFO_TXDATA_OFFSET); + return Result; +} + +/******************************************************************************/ +/** +* +* This is a stub for the scatter-gather send and recv callbacks. The stub +* is here in case the upper layers forget to set the handlers. +* +* @param CallBackRef is a pointer to the upper layer callback reference +* @param BdPtr is a pointer to the first buffer descriptor in a list +* @param NumBds is the number of descriptors in the list. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +static void +StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr, u32 NumBds) +{ + XASSERT_VOID_ALWAYS(); +} + +/******************************************************************************/ +/** +* +* This is a stub for the non-DMA send and recv callbacks. The stub is here in +* case the upper layers forget to set the handlers. +* +* @param CallBackRef is a pointer to the upper layer callback reference +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +static void +StubFifoHandler(void *CallBackRef) +{ + XASSERT_VOID_ALWAYS(); +} + +/******************************************************************************/ +/** +* +* This is a stub for the asynchronous error callback. The stub is here in +* case the upper layers forget to set the handler. +* +* @param CallBackRef is a pointer to the upper layer callback reference +* @param ErrorCode is the Xilinx error code, indicating the cause of the error +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +static void +StubErrorHandler(void *CallBackRef, XStatus ErrorCode) +{ + XASSERT_VOID_ALWAYS(); +} + +/*****************************************************************************/ +/** +* +* Lookup the device configuration based on the unique device ID. The table +* EmacConfigTable contains the configuration info for each device in the system. +* +* @param DeviceId is the unique device ID of the device being looked up. +* +* @return +* +* A pointer to the configuration table entry corresponding to the given +* device ID, or NULL if no match is found. +* +* @note +* +* None. +* +******************************************************************************/ +XEmac_Config * +XEmac_LookupConfig(u16 DeviceId) +{ + XEmac_Config *CfgPtr = NULL; + int i; + + for (i = 0; i < XPAR_XEMAC_NUM_INSTANCES; i++) { + if (XEmac_ConfigTable[i].DeviceId == DeviceId) { + CfgPtr = &XEmac_ConfigTable[i]; + break; + } + } + + return CfgPtr; +} diff --git a/board/xilinx/xilinx_enet/xemac.h b/board/xilinx/xilinx_enet/xemac.h new file mode 100644 index 00000000000..ed704bf29b3 --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac.h @@ -0,0 +1,673 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac.h +* +* The Xilinx Ethernet driver component. This component supports the Xilinx +* Ethernet 10/100 MAC (EMAC). +* +* The Xilinx Ethernet 10/100 MAC supports the following features: +* - Simple and scatter-gather DMA operations, as well as simple memory +* mapped direct I/O interface (FIFOs). +* - Media Independent Interface (MII) for connection to external +* 10/100 Mbps PHY transceivers. +* - MII management control reads and writes with MII PHYs +* - Independent internal transmit and receive FIFOs +* - CSMA/CD compliant operations for half-duplex modes +* - Programmable PHY reset signal +* - Unicast, broadcast, and promiscuous address filtering (no multicast yet) +* - Internal loopback +* - Automatic source address insertion or overwrite (programmable) +* - Automatic FCS insertion and stripping (programmable) +* - Automatic pad insertion and stripping (programmable) +* - Pause frame (flow control) detection in full-duplex mode +* - Programmable interframe gap +* - VLAN frame support. +* - Pause frame support +* +* The device driver supports all the features listed above. +* +* Driver Description +* +* The device driver enables higher layer software (e.g., an application) to +* communicate to the EMAC. The driver handles transmission and reception of +* Ethernet frames, as well as configuration of the controller. It does not +* handle protocol stack functionality such as Link Layer Control (LLC) or the +* Address Resolution Protocol (ARP). The protocol stack that makes use of the +* driver handles this functionality. This implies that the driver is simply a +* pass-through mechanism between a protocol stack and the EMAC. A single device +* driver can support multiple EMACs. +* +* The driver is designed for a zero-copy buffer scheme. That is, the driver will +* not copy buffers. This avoids potential throughput bottlenecks within the +* driver. +* +* Since the driver is a simple pass-through mechanism between a protocol stack +* and the EMAC, no assembly or disassembly of Ethernet frames is done at the +* driver-level. This assumes that the protocol stack passes a correctly +* formatted Ethernet frame to the driver for transmission, and that the driver +* does not validate the contents of an incoming frame +* +* PHY Communication +* +* The driver provides rudimentary read and write functions to allow the higher +* layer software to access the PHY. The EMAC provides MII registers for the +* driver to access. This management interface can be parameterized away in the +* FPGA implementation process. If this is the case, the PHY read and write +* functions of the driver return XST_NO_FEATURE. +* +* External loopback is usually supported at the PHY. It is up to the user to +* turn external loopback on or off at the PHY. The driver simply provides pass- +* through functions for configuring the PHY. The driver does not read, write, +* or reset the PHY on its own. All control of the PHY must be done by the user. +* +* Asynchronous Callbacks +* +* The driver services interrupts and passes Ethernet frames to the higher layer +* software through asynchronous callback functions. When using the driver +* directly (i.e., not with the RTOS protocol stack), the higher layer +* software must register its callback functions during initialization. The +* driver requires callback functions for received frames, for confirmation of +* transmitted frames, and for asynchronous errors. +* +* Interrupts +* +* The driver has no dependencies on the interrupt controller. The driver +* provides two interrupt handlers. XEmac_IntrHandlerDma() handles interrupts +* when the EMAC is configured with scatter-gather DMA. XEmac_IntrHandlerFifo() +* handles interrupts when the EMAC is configured for direct FIFO I/O or simple +* DMA. Either of these routines can be connected to the system interrupt +* controller by the user. +* +* Interrupt Frequency +* +* When the EMAC is configured with scatter-gather DMA, the frequency of +* interrupts can be controlled with the interrupt coalescing features of the +* scatter-gather DMA engine. The frequency of interrupts can be adjusted using +* the driver API functions for setting the packet count threshold and the packet +* wait bound values. +* +* The scatter-gather DMA engine only interrupts when the packet count threshold +* is reached, instead of interrupting for each packet. A packet is a generic +* term used by the scatter-gather DMA engine, and is equivalent to an Ethernet +* frame in our case. +* +* The packet wait bound is a timer value used during interrupt coalescing to +* trigger an interrupt when not enough packets have been received to reach the +* packet count threshold. +* +* These values can be tuned by the user to meet their needs. If there appear to +* be interrupt latency problems or delays in packet arrival that are longer than +* might be expected, the user should verify that the packet count threshold is +* set low enough to receive interrupts before the wait bound timer goes off. +* +* Device Reset +* +* Some errors that can occur in the device require a device reset. These errors +* are listed in the XEmac_SetErrorHandler() function header. The user's error +* handler is responsible for resetting the device and re-configuring it based on +* its needs (the driver does not save the current configuration). When +* integrating into an RTOS, these reset and re-configure obligations are +* taken care of by the Xilinx adapter software if it exists for that RTOS. +* +* Device Configuration +* +* The device can be configured in various ways during the FPGA implementation +* process. Configuration parameters are stored in the xemac_g.c files. +* A table is defined where each entry contains configuration information +* for an EMAC device. This information includes such things as the base address +* of the memory-mapped device, the base addresses of IPIF, DMA, and FIFO modules +* within the device, and whether the device has DMA, counter registers, +* multicast support, MII support, and flow control. +* +* The driver tries to use the features built into the device. So if, for +* example, the hardware is configured with scatter-gather DMA, the driver +* expects to start the scatter-gather channels and expects that the user has set +* up the buffer descriptor lists already. If the user expects to use the driver +* in a mode different than how the hardware is configured, the user should +* modify the configuration table to reflect the mode to be used. Modifying the +* configuration table is a workaround for now until we get some experience with +* how users are intending to use the hardware in its different configurations. +* For example, if the hardware is built with scatter-gather DMA but the user is +* intending to use only simple DMA, the user either needs to modify the config +* table as a workaround or rebuild the hardware with only simple DMA. The +* recommendation at this point is to build the hardware with the features you +* intend to use. If you're inclined to modify the table, do so before the call +* to XEmac_Initialize(). Here is a snippet of code that changes a device to +* simple DMA (the hardware needs to have DMA for this to work of course): +*
+*	 XEmac_Config *ConfigPtr;
+*
+*	 ConfigPtr = XEmac_LookupConfig(DeviceId);
+*	 ConfigPtr->IpIfDmaConfig = XEM_CFG_SIMPLE_DMA;
+* 
+* +* Simple DMA +* +* Simple DMA is supported through the FIFO functions, FifoSend and FifoRecv, of +* the driver (i.e., there is no separate interface for it). The driver makes use +* of the DMA engine for a simple DMA transfer if the device is configured with +* DMA, otherwise it uses the FIFOs directly. While the simple DMA interface is +* therefore transparent to the user, the caching of network buffers is not. +* If the device is configured with DMA and the FIFO interface is used, the user +* must ensure that the network buffers are not cached or are cache coherent, +* since DMA will be used to transfer to and from the Emac device. If the device +* is configured with DMA and the user really wants to use the FIFOs directly, +* the user should rebuild the hardware without DMA. If unable to do this, there +* is a workaround (described above in Device Configuration) to modify the +* configuration table of the driver to fake the driver into thinking the device +* has no DMA. A code snippet follows: +*
+*	 XEmac_Config *ConfigPtr;
+*
+*	 ConfigPtr = XEmac_LookupConfig(DeviceId);
+*	 ConfigPtr->IpIfDmaConfig = XEM_CFG_NO_DMA;
+* 
+* +* Asserts +* +* Asserts are used within all Xilinx drivers to enforce constraints on argument +* values. Asserts can be turned off on a system-wide basis by defining, at +* compile time, the NDEBUG identifier. By default, asserts are turned on and it +* is recommended that users leave asserts on during development. +* +* Building the driver +* +* The XEmac driver is composed of several source files. Why so many? This +* allows the user to build and link only those parts of the driver that are +* necessary. Since the EMAC hardware can be configured in various ways (e.g., +* with or without DMA), the driver too can be built with varying features. +* For the most part, this means that besides always linking in xemac.c, you +* link in only the driver functionality you want. Some of the choices you have +* are polled vs. interrupt, interrupt with FIFOs only vs. interrupt with DMA, +* self-test diagnostics, and driver statistics. Note that currently the DMA code +* must be linked in, even if you don't have DMA in the device. +* +* @note +* +* Xilinx drivers are typically composed of two components, one is the driver +* and the other is the adapter. The driver is independent of OS and processor +* and is intended to be highly portable. The adapter is OS-specific and +* facilitates communication between the driver and an OS. +*

+* This driver is intended to be RTOS and processor independent. It works +* with physical addresses only. Any needs for dynamic memory management, +* threads or thread mutual exclusion, virtual memory, or cache control must +* be satisfied by the layer above this driver. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver	Who  Date     Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rpm  07/31/01 First release
+* 1.00b rpm  02/20/02 Repartitioned files and functions
+* 1.00b rpm  10/08/02 Replaced HasSgDma boolean with IpifDmaConfig enumerated
+*		      configuration parameter
+* 1.00c rpm  12/05/02 New version includes support for simple DMA and the delay
+*		      argument to SgSend
+* 1.00c rpm  02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
+*		      from SetPktThreshold in the internal DMA driver. Also
+*		      avoided compiler warnings by initializing Result in the
+*		      DMA interrupt service routines.
+* 
+* +******************************************************************************/ + +#ifndef XEMAC_H /* prevent circular inclusions */ +#define XEMAC_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xstatus.h" +#include "xparameters.h" +#include "xpacket_fifo_v1_00_b.h" /* Uses v1.00b of Packet Fifo */ +#include "xdma_channel.h" + +/************************** Constant Definitions *****************************/ + +/* + * Device information + */ +#define XEM_DEVICE_NAME "xemac" +#define XEM_DEVICE_DESC "Xilinx Ethernet 10/100 MAC" + +/** @name Configuration options + * + * Device configuration options (see the XEmac_SetOptions() and + * XEmac_GetOptions() for information on how to use these options) + * @{ + */ +/** + *
+ *   XEM_BROADCAST_OPTION	 Broadcast addressing on or off (default is on)
+ *   XEM_UNICAST_OPTION		 Unicast addressing on or off (default is on)
+ *   XEM_PROMISC_OPTION		 Promiscuous addressing on or off (default is off)
+ *   XEM_FDUPLEX_OPTION		 Full duplex on or off (default is off)
+ *   XEM_POLLED_OPTION		 Polled mode on or off (default is off)
+ *   XEM_LOOPBACK_OPTION	 Internal loopback on or off (default is off)
+ *   XEM_FLOW_CONTROL_OPTION	 Interpret pause frames in full duplex mode
+ *				 (default is off)
+ *   XEM_INSERT_PAD_OPTION	 Pad short frames on transmit (default is on)
+ *   XEM_INSERT_FCS_OPTION	 Insert FCS (CRC) on transmit (default is on)
+ *   XEM_INSERT_ADDR_OPTION	 Insert source address on transmit (default is on)
+ *   XEM_OVWRT_ADDR_OPTION	 Overwrite source address on transmit. This is
+ *				 only used if source address insertion is on.
+ *				 (default is on)
+ *   XEM_STRIP_PAD_FCS_OPTION	 Strip FCS and padding from received frames
+ *				 (default is off)
+  * 
+ */ +#define XEM_UNICAST_OPTION 0x00000001UL +#define XEM_BROADCAST_OPTION 0x00000002UL +#define XEM_PROMISC_OPTION 0x00000004UL +#define XEM_FDUPLEX_OPTION 0x00000008UL +#define XEM_POLLED_OPTION 0x00000010UL +#define XEM_LOOPBACK_OPTION 0x00000020UL +#define XEM_FLOW_CONTROL_OPTION 0x00000080UL +#define XEM_INSERT_PAD_OPTION 0x00000100UL +#define XEM_INSERT_FCS_OPTION 0x00000200UL +#define XEM_INSERT_ADDR_OPTION 0x00000400UL +#define XEM_OVWRT_ADDR_OPTION 0x00000800UL +#define XEM_STRIP_PAD_FCS_OPTION 0x00002000UL +/*@}*/ +/* + * Not supported yet: + * XEM_MULTICAST_OPTION Multicast addressing on or off (default is off) + */ +/* NOT SUPPORTED YET... */ +#define XEM_MULTICAST_OPTION 0x00000040UL + +/* + * Some default values for interrupt coalescing within the scatter-gather + * DMA engine. + */ +#define XEM_SGDMA_DFT_THRESHOLD 1 /* Default pkt threshold */ +#define XEM_SGDMA_MAX_THRESHOLD 255 /* Maximum pkt theshold */ +#define XEM_SGDMA_DFT_WAITBOUND 5 /* Default pkt wait bound (msec) */ +#define XEM_SGDMA_MAX_WAITBOUND 1023 /* Maximum pkt wait bound (msec) */ + +/* + * Direction identifiers. These are used for setting values like packet + * thresholds and wait bound for specific channels + */ +#define XEM_SEND 1 +#define XEM_RECV 2 + +/* + * Arguments to SgSend function to indicate whether to hold off starting + * the scatter-gather engine. + */ +#define XEM_SGDMA_NODELAY 0 /* start SG DMA immediately */ +#define XEM_SGDMA_DELAY 1 /* do not start SG DMA */ + +/* + * Constants to determine the configuration of the hardware device. They are + * used to allow the driver to verify it can operate with the hardware. + */ +#define XEM_CFG_NO_IPIF 0 /* Not supported by the driver */ +#define XEM_CFG_NO_DMA 1 /* No DMA */ +#define XEM_CFG_SIMPLE_DMA 2 /* Simple DMA */ +#define XEM_CFG_DMA_SG 3 /* DMA scatter gather */ + +/* + * The next few constants help upper layers determine the size of memory + * pools used for Ethernet buffers and descriptor lists. + */ +#define XEM_MAC_ADDR_SIZE 6 /* six-byte MAC address */ +#define XEM_MTU 1500 /* max size of Ethernet frame */ +#define XEM_HDR_SIZE 14 /* size of Ethernet header */ +#define XEM_HDR_VLAN_SIZE 18 /* size of Ethernet header with VLAN */ +#define XEM_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */ +#define XEM_MAX_FRAME_SIZE (XEM_MTU + XEM_HDR_SIZE + XEM_TRL_SIZE) +#define XEM_MAX_VLAN_FRAME_SIZE (XEM_MTU + XEM_HDR_VLAN_SIZE + XEM_TRL_SIZE) + +/* + * Define a default number of send and receive buffers + */ +#define XEM_MIN_RECV_BUFS 32 /* minimum # of recv buffers */ +#define XEM_DFT_RECV_BUFS 64 /* default # of recv buffers */ + +#define XEM_MIN_SEND_BUFS 16 /* minimum # of send buffers */ +#define XEM_DFT_SEND_BUFS 32 /* default # of send buffers */ + +#define XEM_MIN_BUFFERS (XEM_MIN_RECV_BUFS + XEM_MIN_SEND_BUFS) +#define XEM_DFT_BUFFERS (XEM_DFT_RECV_BUFS + XEM_DFT_SEND_BUFS) + +/* + * Define the number of send and receive buffer descriptors, used for + * scatter-gather DMA + */ +#define XEM_MIN_RECV_DESC 16 /* minimum # of recv descriptors */ +#define XEM_DFT_RECV_DESC 32 /* default # of recv descriptors */ + +#define XEM_MIN_SEND_DESC 8 /* minimum # of send descriptors */ +#define XEM_DFT_SEND_DESC 16 /* default # of send descriptors */ + +/**************************** Type Definitions *******************************/ + +/** + * Ethernet statistics (see XEmac_GetStats() and XEmac_ClearStats()) + */ +typedef struct { + u32 XmitFrames; /**< Number of frames transmitted */ + u32 XmitBytes; /**< Number of bytes transmitted */ + u32 XmitLateCollisionErrors; + /**< Number of transmission failures + due to late collisions */ + u32 XmitExcessDeferral; /**< Number of transmission failures + due o excess collision deferrals */ + u32 XmitOverrunErrors; /**< Number of transmit overrun errors */ + u32 XmitUnderrunErrors; /**< Number of transmit underrun errors */ + u32 RecvFrames; /**< Number of frames received */ + u32 RecvBytes; /**< Number of bytes received */ + u32 RecvFcsErrors; /**< Number of frames discarded due + to FCS errors */ + u32 RecvAlignmentErrors; /**< Number of frames received with + alignment errors */ + u32 RecvOverrunErrors; /**< Number of frames discarded due + to overrun errors */ + u32 RecvUnderrunErrors; /**< Number of recv underrun errors */ + u32 RecvMissedFrameErrors; + /**< Number of frames missed by MAC */ + u32 RecvCollisionErrors; /**< Number of frames discarded due + to collisions */ + u32 RecvLengthFieldErrors; + /**< Number of frames discarded with + invalid length field */ + u32 RecvShortErrors; /**< Number of short frames discarded */ + u32 RecvLongErrors; /**< Number of long frames discarded */ + u32 DmaErrors; /**< Number of DMA errors since init */ + u32 FifoErrors; /**< Number of FIFO errors since init */ + u32 RecvInterrupts; /**< Number of receive interrupts */ + u32 XmitInterrupts; /**< Number of transmit interrupts */ + u32 EmacInterrupts; /**< Number of MAC (device) interrupts */ + u32 TotalIntrs; /**< Total interrupts */ +} XEmac_Stats; + +/** + * This typedef contains configuration information for a device. + */ +typedef struct { + u16 DeviceId; /**< Unique ID of device */ + u32 BaseAddress; /**< Register base address */ + u32 HasCounters; /**< Does device have counters? */ + u8 IpIfDmaConfig; /**< IPIF/DMA hardware configuration */ + u32 HasMii; /**< Does device support MII? */ + +} XEmac_Config; + +/** @name Typedefs for callbacks + * Callback functions. + * @{ + */ +/** + * Callback when data is sent or received with scatter-gather DMA. + * + * @param CallBackRef is a callback reference passed in by the upper layer + * when setting the callback functions, and passed back to the upper + * layer when the callback is invoked. + * @param BdPtr is a pointer to the first buffer descriptor in a list of + * buffer descriptors. + * @param NumBds is the number of buffer descriptors in the list pointed + * to by BdPtr. + */ +typedef void (*XEmac_SgHandler) (void *CallBackRef, XBufDescriptor * BdPtr, + u32 NumBds); + +/** + * Callback when data is sent or received with direct FIFO communication or + * simple DMA. The user typically defines two callacks, one for send and one + * for receive. + * + * @param CallBackRef is a callback reference passed in by the upper layer + * when setting the callback functions, and passed back to the upper + * layer when the callback is invoked. + */ +typedef void (*XEmac_FifoHandler) (void *CallBackRef); + +/** + * Callback when an asynchronous error occurs. + * + * @param CallBackRef is a callback reference passed in by the upper layer + * when setting the callback functions, and passed back to the upper + * layer when the callback is invoked. + * @param ErrorCode is a Xilinx error code defined in xstatus.h. Also see + * XEmac_SetErrorHandler() for a description of possible errors. + */ +typedef void (*XEmac_ErrorHandler) (void *CallBackRef, XStatus ErrorCode); +/*@}*/ + +/** + * The XEmac driver instance data. The user is required to allocate a + * variable of this type for every EMAC device in the system. A pointer + * to a variable of this type is then passed to the driver API functions. + */ +typedef struct { + u32 BaseAddress; /* Base address (of IPIF) */ + u32 IsStarted; /* Device is currently started */ + u32 IsReady; /* Device is initialized and ready */ + u32 IsPolled; /* Device is in polled mode */ + u8 IpIfDmaConfig; /* IPIF/DMA hardware configuration */ + u32 HasMii; /* Does device support MII? */ + u32 HasMulticastHash; /* Does device support multicast hash table? */ + + XEmac_Stats Stats; + XPacketFifoV100b RecvFifo; /* FIFO used to receive frames */ + XPacketFifoV100b SendFifo; /* FIFO used to send frames */ + + /* + * Callbacks + */ + XEmac_FifoHandler FifoRecvHandler; /* for non-DMA/simple DMA interrupts */ + void *FifoRecvRef; + XEmac_FifoHandler FifoSendHandler; /* for non-DMA/simple DMA interrupts */ + void *FifoSendRef; + XEmac_ErrorHandler ErrorHandler; /* for asynchronous errors */ + void *ErrorRef; + + XDmaChannel RecvChannel; /* DMA receive channel driver */ + XDmaChannel SendChannel; /* DMA send channel driver */ + + XEmac_SgHandler SgRecvHandler; /* callback for scatter-gather DMA */ + void *SgRecvRef; + XEmac_SgHandler SgSendHandler; /* callback for scatter-gather DMA */ + void *SgSendRef; +} XEmac; + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/** +* +* This macro determines if the device is currently configured for +* scatter-gather DMA. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* Boolean TRUE if the device is configured for scatter-gather DMA, or FALSE +* if it is not. +* +* @note +* +* Signature: u32 XEmac_mIsSgDma(XEmac *InstancePtr) +* +******************************************************************************/ +#define XEmac_mIsSgDma(InstancePtr) \ + ((InstancePtr)->IpIfDmaConfig == XEM_CFG_DMA_SG) + +/*****************************************************************************/ +/** +* +* This macro determines if the device is currently configured for simple DMA. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* Boolean TRUE if the device is configured for simple DMA, or FALSE otherwise +* +* @note +* +* Signature: u32 XEmac_mIsSimpleDma(XEmac *InstancePtr) +* +******************************************************************************/ +#define XEmac_mIsSimpleDma(InstancePtr) \ + ((InstancePtr)->IpIfDmaConfig == XEM_CFG_SIMPLE_DMA) + +/*****************************************************************************/ +/** +* +* This macro determines if the device is currently configured with DMA (either +* simple DMA or scatter-gather DMA) +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* Boolean TRUE if the device is configured with DMA, or FALSE otherwise +* +* @note +* +* Signature: u32 XEmac_mIsDma(XEmac *InstancePtr) +* +******************************************************************************/ +#define XEmac_mIsDma(InstancePtr) \ + (XEmac_mIsSimpleDma(InstancePtr) || XEmac_mIsSgDma(InstancePtr)) + +/************************** Function Prototypes ******************************/ + +/* + * Initialization functions in xemac.c + */ +XStatus XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId); +XStatus XEmac_Start(XEmac * InstancePtr); +XStatus XEmac_Stop(XEmac * InstancePtr); +void XEmac_Reset(XEmac * InstancePtr); +XEmac_Config *XEmac_LookupConfig(u16 DeviceId); + +/* + * Diagnostic functions in xemac_selftest.c + */ +XStatus XEmac_SelfTest(XEmac * InstancePtr); + +/* + * Polled functions in xemac_polled.c + */ +XStatus XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount); +XStatus XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr); + +/* + * Interrupts with scatter-gather DMA functions in xemac_intr_dma.c + */ +XStatus XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay); +XStatus XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr); +XStatus XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold); +XStatus XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction, + u8 * ThreshPtr); +XStatus XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction, + u32 TimerValue); +XStatus XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction, + u32 * WaitPtr); +XStatus XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr, + u32 ByteCount); +XStatus XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr, + u32 ByteCount); +void XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_SgHandler FuncPtr); +void XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_SgHandler FuncPtr); + +void XEmac_IntrHandlerDma(void *InstancePtr); /* interrupt handler */ + +/* + * Interrupts with direct FIFO functions in xemac_intr_fifo.c. Also used + * for simple DMA. + */ +XStatus XEmac_FifoSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount); +XStatus XEmac_FifoRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr); +void XEmac_SetFifoRecvHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_FifoHandler FuncPtr); +void XEmac_SetFifoSendHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_FifoHandler FuncPtr); + +void XEmac_IntrHandlerFifo(void *InstancePtr); /* interrupt handler */ + +/* + * General interrupt-related functions in xemac_intr.c + */ +void XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_ErrorHandler FuncPtr); + +/* + * MAC configuration in xemac_options.c + */ +XStatus XEmac_SetOptions(XEmac * InstancePtr, u32 OptionFlag); +u32 XEmac_GetOptions(XEmac * InstancePtr); +XStatus XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr); +void XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr); +XStatus XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2); +void XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr); + +/* + * Multicast functions in xemac_multicast.c (not supported by EMAC yet) + */ +XStatus XEmac_MulticastAdd(XEmac * InstancePtr, u8 * AddressPtr); +XStatus XEmac_MulticastClear(XEmac * InstancePtr); + +/* + * PHY configuration in xemac_phy.c + */ +XStatus XEmac_PhyRead(XEmac * InstancePtr, u32 PhyAddress, + u32 RegisterNum, u16 * PhyDataPtr); +XStatus XEmac_PhyWrite(XEmac * InstancePtr, u32 PhyAddress, + u32 RegisterNum, u16 PhyData); + +/* + * Statistics in xemac_stats.c + */ +void XEmac_GetStats(XEmac * InstancePtr, XEmac_Stats * StatsPtr); +void XEmac_ClearStats(XEmac * InstancePtr); + +#endif /* end of protection macro */ diff --git a/board/xilinx/xilinx_enet/xemac_g.c b/board/xilinx/xilinx_enet/xemac_g.c new file mode 100644 index 00000000000..9340f911f86 --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac_g.c @@ -0,0 +1,60 @@ +/******************************************************************* +* +* CAUTION: This file is automatically generated by libgen. +* Version: Xilinx EDK 6.1.2 EDK_G.14 +* DO NOT EDIT. +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +* Description: Driver configuration +* +*******************************************************************/ + +#include "xparameters.h" +#include "xemac.h" + +/* +* The configuration table for devices +*/ + +XEmac_Config XEmac_ConfigTable[] = { + { + XPAR_OPB_ETHERNET_0_DEVICE_ID, + XPAR_OPB_ETHERNET_0_BASEADDR, + XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST, + XPAR_OPB_ETHERNET_0_DMA_PRESENT, + XPAR_OPB_ETHERNET_0_MII_EXIST} +}; diff --git a/board/xilinx/xilinx_enet/xemac_i.h b/board/xilinx/xilinx_enet/xemac_i.h new file mode 100644 index 00000000000..9c160f38803 --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac_i.h @@ -0,0 +1,207 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac_i.h +* +* This header file contains internal identifiers, which are those shared +* between XEmac components. The identifiers in this file are not intended for +* use external to the driver. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver	Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm  07/31/01 First release
+* 1.00b rpm  02/20/02 Repartitioned files and functions
+* 1.00b rpm  04/29/02 Moved register definitions to xemac_l.h
+* 1.00c rpm  12/05/02 New version includes support for simple DMA
+* 
+* +******************************************************************************/ + +#ifndef XEMAC_I_H /* prevent circular inclusions */ +#define XEMAC_I_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xemac.h" +#include "xemac_l.h" + +/************************** Constant Definitions *****************************/ + +/* + * Default buffer descriptor control word masks. The default send BD control + * is set for incrementing the source address by one for each byte transferred, + * and specify that the destination address (FIFO) is local to the device. The + * default receive BD control is set for incrementing the destination address + * by one for each byte transferred, and specify that the source address is + * local to the device. + */ +#define XEM_DFT_SEND_BD_MASK (XDC_DMACR_SOURCE_INCR_MASK | \ + XDC_DMACR_DEST_LOCAL_MASK) +#define XEM_DFT_RECV_BD_MASK (XDC_DMACR_DEST_INCR_MASK | \ + XDC_DMACR_SOURCE_LOCAL_MASK) + +/* + * Masks for the IPIF Device Interrupt enable and status registers. + */ +#define XEM_IPIF_EMAC_MASK 0x00000004UL /* MAC interrupt */ +#define XEM_IPIF_SEND_DMA_MASK 0x00000008UL /* Send DMA interrupt */ +#define XEM_IPIF_RECV_DMA_MASK 0x00000010UL /* Receive DMA interrupt */ +#define XEM_IPIF_RECV_FIFO_MASK 0x00000020UL /* Receive FIFO interrupt */ +#define XEM_IPIF_SEND_FIFO_MASK 0x00000040UL /* Send FIFO interrupt */ + +/* + * Default IPIF Device Interrupt mask when configured for DMA + */ +#define XEM_IPIF_DMA_DFT_MASK (XEM_IPIF_SEND_DMA_MASK | \ + XEM_IPIF_RECV_DMA_MASK | \ + XEM_IPIF_EMAC_MASK | \ + XEM_IPIF_SEND_FIFO_MASK | \ + XEM_IPIF_RECV_FIFO_MASK) + +/* + * Default IPIF Device Interrupt mask when configured without DMA + */ +#define XEM_IPIF_FIFO_DFT_MASK (XEM_IPIF_EMAC_MASK | \ + XEM_IPIF_SEND_FIFO_MASK | \ + XEM_IPIF_RECV_FIFO_MASK) + +#define XEM_IPIF_DMA_DEV_INTR_COUNT 7 /* Number of interrupt sources */ +#define XEM_IPIF_FIFO_DEV_INTR_COUNT 5 /* Number of interrupt sources */ +#define XEM_IPIF_DEVICE_INTR_COUNT 7 /* Number of interrupt sources */ +#define XEM_IPIF_IP_INTR_COUNT 22 /* Number of MAC interrupts */ + +/* a mask for all transmit interrupts, used in polled mode */ +#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK | \ + XEM_EIR_XMIT_ERROR_MASK | \ + XEM_EIR_XMIT_SFIFO_EMPTY_MASK | \ + XEM_EIR_XMIT_LFIFO_FULL_MASK) + +/* a mask for all receive interrupts, used in polled mode */ +#define XEM_EIR_RECV_ALL_MASK (XEM_EIR_RECV_DONE_MASK | \ + XEM_EIR_RECV_ERROR_MASK | \ + XEM_EIR_RECV_LFIFO_EMPTY_MASK | \ + XEM_EIR_RECV_LFIFO_OVER_MASK | \ + XEM_EIR_RECV_LFIFO_UNDER_MASK | \ + XEM_EIR_RECV_DFIFO_OVER_MASK | \ + XEM_EIR_RECV_MISSED_FRAME_MASK | \ + XEM_EIR_RECV_COLLISION_MASK | \ + XEM_EIR_RECV_FCS_ERROR_MASK | \ + XEM_EIR_RECV_LEN_ERROR_MASK | \ + XEM_EIR_RECV_SHORT_ERROR_MASK | \ + XEM_EIR_RECV_LONG_ERROR_MASK | \ + XEM_EIR_RECV_ALIGN_ERROR_MASK) + +/* a default interrupt mask for scatter-gather DMA operation */ +#define XEM_EIR_DFT_SG_MASK (XEM_EIR_RECV_ERROR_MASK | \ + XEM_EIR_RECV_LFIFO_OVER_MASK | \ + XEM_EIR_RECV_LFIFO_UNDER_MASK | \ + XEM_EIR_XMIT_SFIFO_OVER_MASK | \ + XEM_EIR_XMIT_SFIFO_UNDER_MASK | \ + XEM_EIR_XMIT_LFIFO_OVER_MASK | \ + XEM_EIR_XMIT_LFIFO_UNDER_MASK | \ + XEM_EIR_RECV_DFIFO_OVER_MASK | \ + XEM_EIR_RECV_MISSED_FRAME_MASK | \ + XEM_EIR_RECV_COLLISION_MASK | \ + XEM_EIR_RECV_FCS_ERROR_MASK | \ + XEM_EIR_RECV_LEN_ERROR_MASK | \ + XEM_EIR_RECV_SHORT_ERROR_MASK | \ + XEM_EIR_RECV_LONG_ERROR_MASK | \ + XEM_EIR_RECV_ALIGN_ERROR_MASK) + +/* a default interrupt mask for non-DMA operation (direct FIFOs) */ +#define XEM_EIR_DFT_FIFO_MASK (XEM_EIR_XMIT_DONE_MASK | \ + XEM_EIR_RECV_DONE_MASK | \ + XEM_EIR_DFT_SG_MASK) + +/* + * Mask for the DMA interrupt enable and status registers when configured + * for scatter-gather DMA. + */ +#define XEM_DMA_SG_INTR_MASK (XDC_IXR_DMA_ERROR_MASK | \ + XDC_IXR_PKT_THRESHOLD_MASK | \ + XDC_IXR_PKT_WAIT_BOUND_MASK | \ + XDC_IXR_SG_END_MASK) + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/* +* +* Clears a structure of given size, in bytes, by setting each byte to 0. +* +* @param StructPtr is a pointer to the structure to be cleared. +* @param NumBytes is the number of bytes in the structure. +* +* @return +* +* None. +* +* @note +* +* Signature: void XEmac_mClearStruct(u8 *StructPtr, unsigned int NumBytes) +* +******************************************************************************/ +#define XEmac_mClearStruct(StructPtr, NumBytes) \ +{ \ + int i; \ + u8 *BytePtr = (u8 *)(StructPtr); \ + for (i=0; i < (unsigned int)(NumBytes); i++) \ + { \ + *BytePtr++ = 0; \ + } \ +} + +/************************** Variable Definitions *****************************/ + +extern XEmac_Config XEmac_ConfigTable[]; + +/************************** Function Prototypes ******************************/ + +void XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus); +void XEmac_CheckFifoRecvError(XEmac * InstancePtr); +void XEmac_CheckFifoSendError(XEmac * InstancePtr); + +#endif /* end of protection macro */ diff --git a/board/xilinx/xilinx_enet/xemac_intr.c b/board/xilinx/xilinx_enet/xemac_intr.c new file mode 100644 index 00000000000..b9a26215645 --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac_intr.c @@ -0,0 +1,402 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac_intr.c +* +* This file contains general interrupt-related functions of the XEmac driver. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm  07/31/01 First release
+* 1.00b rpm  02/20/02 Repartitioned files and functions
+* 1.00c rpm  12/05/02 New version includes support for simple DMA
+* 1.00c rpm  03/31/03 Added comment to indicate that no Receive Length FIFO
+*                     overrun interrupts occur in v1.00l and later of the EMAC
+*                     device. This avoids the need to reset the device on
+*                     receive overruns.
+* 
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xemac_i.h" +#include "xio.h" +#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */ + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Variable Definitions *****************************/ + +/************************** Function Prototypes ******************************/ + +/*****************************************************************************/ +/** +* +* Set the callback function for handling asynchronous errors. The upper layer +* software should call this function during initialization. +* +* The error callback is invoked by the driver within interrupt context, so it +* needs to do its job quickly. If there are potentially slow operations within +* the callback, these should be done at task-level. +* +* The Xilinx errors that must be handled by the callback are: +* - XST_DMA_ERROR indicates an unrecoverable DMA error occurred. This is +* typically a bus error or bus timeout. The handler must reset and +* re-configure the device. +* - XST_FIFO_ERROR indicates an unrecoverable FIFO error occurred. This is a +* deadlock condition in the packet FIFO. The handler must reset and +* re-configure the device. +* - XST_RESET_ERROR indicates an unrecoverable MAC error occurred, usually an +* overrun or underrun. The handler must reset and re-configure the device. +* - XST_DMA_SG_NO_LIST indicates an attempt was made to access a scatter-gather +* DMA list that has not yet been created. +* - XST_DMA_SG_LIST_EMPTY indicates the driver tried to get a descriptor from +* the receive descriptor list, but the list was empty. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param CallBackRef is a reference pointer to be passed back to the adapter in +* the callback. This helps the adapter correlate the callback to a +* particular driver. +* @param FuncPtr is the pointer to the callback function. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_ErrorHandler FuncPtr) +{ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(FuncPtr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + InstancePtr->ErrorHandler = FuncPtr; + InstancePtr->ErrorRef = CallBackRef; +} + +/****************************************************************************/ +/* +* +* Check the interrupt status bits of the Ethernet MAC for errors. Errors +* currently handled are: +* - Receive length FIFO overrun. Indicates data was lost due to the receive +* length FIFO becoming full during the reception of a packet. Only a device +* reset clears this condition. +* - Receive length FIFO underrun. An attempt to read an empty FIFO. Only a +* device reset clears this condition. +* - Transmit status FIFO overrun. Indicates data was lost due to the transmit +* status FIFO becoming full following the transmission of a packet. Only a +* device reset clears this condition. +* - Transmit status FIFO underrun. An attempt to read an empty FIFO. Only a +* device reset clears this condition. +* - Transmit length FIFO overrun. Indicates data was lost due to the transmit +* length FIFO becoming full following the transmission of a packet. Only a +* device reset clears this condition. +* - Transmit length FIFO underrun. An attempt to read an empty FIFO. Only a +* device reset clears this condition. +* - Receive data FIFO overrun. Indicates data was lost due to the receive data +* FIFO becoming full during the reception of a packet. +* - Receive data errors: +* - Receive missed frame error. Valid data was lost by the MAC. +* - Receive collision error. Data was lost by the MAC due to a collision. +* - Receive FCS error. Data was dicarded by the MAC due to FCS error. +* - Receive length field error. Data was dicarded by the MAC due to an invalid +* length field in the packet. +* - Receive short error. Data was dicarded by the MAC because a packet was +* shorter than allowed. +* - Receive long error. Data was dicarded by the MAC because a packet was +* longer than allowed. +* - Receive alignment error. Data was truncated by the MAC because its length +* was not byte-aligned. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param IntrStatus is the contents of the interrupt status register to be checked +* +* @return +* +* None. +* +* @note +* +* This function is intended for internal use only. +* +******************************************************************************/ +void +XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus) +{ + u32 ResetError = FALSE; + + /* + * First check for receive fifo overrun/underrun errors. Most require a + * reset by the user to clear, but the data FIFO overrun error does not. + */ + if (IntrStatus & XEM_EIR_RECV_DFIFO_OVER_MASK) { + InstancePtr->Stats.RecvOverrunErrors++; + InstancePtr->Stats.FifoErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_LFIFO_OVER_MASK) { + /* + * Receive Length FIFO overrun interrupts no longer occur in v1.00l + * and later of the EMAC device. Frames are just dropped by the EMAC + * if the length FIFO is full. The user would notice the Receive Missed + * Frame count incrementing without any other errors being reported. + * This code is left here for backward compatibility with v1.00k and + * older EMAC devices. + */ + InstancePtr->Stats.RecvOverrunErrors++; + InstancePtr->Stats.FifoErrors++; + ResetError = TRUE; /* requires a reset */ + } + + if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) { + InstancePtr->Stats.RecvUnderrunErrors++; + InstancePtr->Stats.FifoErrors++; + ResetError = TRUE; /* requires a reset */ + } + + /* + * Now check for general receive errors. Get the latest count where + * available, otherwise just bump the statistic so we know the interrupt + * occurred. + */ + if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) { + if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) { + /* + * Caused by length FIFO or data FIFO overruns on receive side + */ + InstancePtr->Stats.RecvMissedFrameErrors = + XIo_In32(InstancePtr->BaseAddress + + XEM_RMFC_OFFSET); + } + + if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) { + InstancePtr->Stats.RecvCollisionErrors = + XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET); + } + + if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) { + InstancePtr->Stats.RecvFcsErrors = + XIo_In32(InstancePtr->BaseAddress + + XEM_RFCSEC_OFFSET); + } + + if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) { + InstancePtr->Stats.RecvLengthFieldErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) { + InstancePtr->Stats.RecvShortErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) { + InstancePtr->Stats.RecvLongErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) { + InstancePtr->Stats.RecvAlignmentErrors = + XIo_In32(InstancePtr->BaseAddress + + XEM_RAEC_OFFSET); + } + + /* + * Bump recv interrupts stats only if not scatter-gather DMA (this + * stat gets bumped elsewhere in that case) + */ + if (!XEmac_mIsSgDma(InstancePtr)) { + InstancePtr->Stats.RecvInterrupts++; /* TODO: double bump? */ + } + + } + + /* + * Check for transmit errors. These apply to both DMA and non-DMA modes + * of operation. The entire device should be reset after overruns or + * underruns. + */ + if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | + XEM_EIR_XMIT_LFIFO_OVER_MASK)) { + InstancePtr->Stats.XmitOverrunErrors++; + InstancePtr->Stats.FifoErrors++; + ResetError = TRUE; + } + + if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | + XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { + InstancePtr->Stats.XmitUnderrunErrors++; + InstancePtr->Stats.FifoErrors++; + ResetError = TRUE; + } + + if (ResetError) { + /* + * If a reset error occurred, disable the EMAC interrupts since the + * reset-causing interrupt(s) is latched in the EMAC - meaning it will + * keep occurring until the device is reset. In order to give the higher + * layer software time to reset the device, we have to disable the + * overrun/underrun interrupts until that happens. We trust that the + * higher layer resets the device. We are able to get away with disabling + * all EMAC interrupts since the only interrupts it generates are for + * error conditions, and we don't care about any more errors right now. + */ + XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress, 0); + + /* + * Invoke the error handler callback, which should result in a reset + * of the device by the upper layer software. + */ + InstancePtr->ErrorHandler(InstancePtr->ErrorRef, + XST_RESET_ERROR); + } +} + +/*****************************************************************************/ +/* +* +* Check the receive packet FIFO for errors. FIFO error interrupts are: +* - Deadlock. See the XPacketFifo component for a description of deadlock on a +* FIFO. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* Although the function returns void, it can return an asynchronous error to the +* application through the error handler. It can return XST_FIFO_ERROR if a FIFO +* error occurred. +* +* @note +* +* This function is intended for internal use only. +* +******************************************************************************/ +void +XEmac_CheckFifoRecvError(XEmac * InstancePtr) +{ + /* + * Although the deadlock is currently the only interrupt from a packet + * FIFO, make sure it is deadlocked before taking action. There is no + * need to clear this interrupt since it requires a reset of the device. + */ + if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) { + u32 IntrEnable; + + InstancePtr->Stats.FifoErrors++; + + /* + * Invoke the error callback function, which should result in a reset + * of the device by the upper layer software. We first need to disable + * the FIFO interrupt, since otherwise the upper layer thread that + * handles the reset may never run because this interrupt condition + * doesn't go away until a reset occurs (there is no way to ack it). + */ + IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress); + XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress, + IntrEnable & ~XEM_IPIF_RECV_FIFO_MASK); + + InstancePtr->ErrorHandler(InstancePtr->ErrorRef, + XST_FIFO_ERROR); + } +} + +/*****************************************************************************/ +/* +* +* Check the send packet FIFO for errors. FIFO error interrupts are: +* - Deadlock. See the XPacketFifo component for a description of deadlock on a +* FIFO. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* Although the function returns void, it can return an asynchronous error to the +* application through the error handler. It can return XST_FIFO_ERROR if a FIFO +* error occurred. +* +* @note +* +* This function is intended for internal use only. +* +******************************************************************************/ +void +XEmac_CheckFifoSendError(XEmac * InstancePtr) +{ + /* + * Although the deadlock is currently the only interrupt from a packet + * FIFO, make sure it is deadlocked before taking action. There is no + * need to clear this interrupt since it requires a reset of the device. + */ + if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) { + u32 IntrEnable; + + InstancePtr->Stats.FifoErrors++; + + /* + * Invoke the error callback function, which should result in a reset + * of the device by the upper layer software. We first need to disable + * the FIFO interrupt, since otherwise the upper layer thread that + * handles the reset may never run because this interrupt condition + * doesn't go away until a reset occurs (there is no way to ack it). + */ + IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress); + XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress, + IntrEnable & ~XEM_IPIF_SEND_FIFO_MASK); + + InstancePtr->ErrorHandler(InstancePtr->ErrorRef, + XST_FIFO_ERROR); + } +} diff --git a/board/xilinx/xilinx_enet/xemac_intr_dma.c b/board/xilinx/xilinx_enet/xemac_intr_dma.c new file mode 100644 index 00000000000..567abb42abb --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac_intr_dma.c @@ -0,0 +1,1344 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac_intr_dma.c +* +* Contains functions used in interrupt mode when configured with scatter-gather +* DMA. +* +* The interrupt handler, XEmac_IntrHandlerDma(), must be connected by the user +* to the interrupt controller. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- ---------------------------------------------------------
+* 1.00a rpm  07/31/01 First release
+* 1.00b rpm  02/20/02 Repartitioned files and functions
+* 1.00c rpm  12/05/02 New version includes support for simple DMA and the delay
+*                     argument to SgSend
+* 1.00c rpm  02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
+*                     from SetPktThreshold in the internal DMA driver. Also
+*                     avoided compiler warnings by initializing Result in the
+*                     interrupt service routines.
+* 1.00c rpm  03/26/03 Fixed a problem in the interrupt service routines where
+*                     the interrupt status was toggled clear after a call to
+*                     ErrorHandler, but if ErrorHandler reset the device the
+*                     toggle actually asserted the interrupt because the
+*                     reset had cleared it.
+* 
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xemac_i.h" +#include "xio.h" +#include "xbuf_descriptor.h" +#include "xdma_channel.h" +#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */ + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Variable Definitions *****************************/ + +/************************** Function Prototypes ******************************/ + +static void HandleDmaRecvIntr(XEmac * InstancePtr); +static void HandleDmaSendIntr(XEmac * InstancePtr); +static void HandleEmacDmaIntr(XEmac * InstancePtr); + +/*****************************************************************************/ +/** +* +* Send an Ethernet frame using scatter-gather DMA. The caller attaches the +* frame to one or more buffer descriptors, then calls this function once for +* each descriptor. The caller is responsible for allocating and setting up the +* descriptor. An entire Ethernet frame may or may not be contained within one +* descriptor. This function simply inserts the descriptor into the scatter- +* gather engine's transmit list. The caller is responsible for providing mutual +* exclusion to guarantee that a frame is contiguous in the transmit list. The +* buffer attached to the descriptor must be word-aligned. +* +* The driver updates the descriptor with the device control register before +* being inserted into the transmit list. If this is the last descriptor in +* the frame, the inserts are committed, which means the descriptors for this +* frame are now available for transmission. +* +* It is assumed that the upper layer software supplies a correctly formatted +* Ethernet frame, including the destination and source addresses, the +* type/length field, and the data field. It is also assumed that upper layer +* software does not append FCS at the end of the frame. +* +* The buffer attached to the descriptor must be word-aligned on the front end. +* +* This call is non-blocking. Notification of error or successful transmission +* is done asynchronously through the send or error callback function. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param BdPtr is the address of a descriptor to be inserted into the transmit +* ring. +* @param Delay indicates whether to start the scatter-gather DMA channel +* immediately, or whether to wait. This allows the user to build up a +* list of more than one descriptor before starting the transmission of +* the packets, which allows the application to keep up with DMA and have +* a constant stream of frames being transmitted. Use XEM_SGDMA_NODELAY or +* XEM_SGDMA_DELAY, defined in xemac.h, as the value of this argument. If +* the user chooses to delay and build a list, the user must call this +* function with the XEM_SGDMA_NODELAY option or call XEmac_Start() to +* kick off the tranmissions. +* +* @return +* +* - XST_SUCCESS if the buffer was successfull sent +* - XST_DEVICE_IS_STOPPED if the Ethernet MAC has not been started yet +* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode +* - XST_DMA_SG_LIST_FULL if the descriptor list for the DMA channel is full +* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into +* the list because a locked descriptor exists at the insert point +* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the +* list, the DMA channel believes there are no new descriptors to commit. If +* this is ever encountered, there is likely a thread mutual exclusion problem +* on transmit. +* +* @note +* +* This function is not thread-safe. The user must provide mutually exclusive +* access to this function if there are to be multiple threads that can call it. +* +* @internal +* +* A status that should never be returned from this function, although +* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device +* requires a list to be created, and this function requires the device to be +* started. +* +******************************************************************************/ +XStatus +XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay) +{ + XStatus Result; + u32 BdControl; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BdPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Be sure the device is configured for scatter-gather DMA, then be sure + * it is started. + */ + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + /* + * Set some descriptor control word defaults (source address increment + * and local destination address) and the destination address + * (the FIFO). These are the same for every transmit descriptor. + */ + BdControl = XBufDescriptor_GetControl(BdPtr); + XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_SEND_BD_MASK); + + XBufDescriptor_SetDestAddress(BdPtr, + InstancePtr->BaseAddress + + XEM_PFIFO_TXDATA_OFFSET); + + /* + * Put the descriptor in the send list. The DMA component accesses data + * here that can also be modified in interrupt context, so a critical + * section is required. + */ + XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress); + + Result = XDmaChannel_PutDescriptor(&InstancePtr->SendChannel, BdPtr); + if (Result != XST_SUCCESS) { + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + return Result; + } + + /* + * If this is the last buffer in the frame, commit the inserts and start + * the DMA engine if necessary + */ + if (XBufDescriptor_IsLastControl(BdPtr)) { + Result = XDmaChannel_CommitPuts(&InstancePtr->SendChannel); + if (Result != XST_SUCCESS) { + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + return Result; + } + + if (Delay == XEM_SGDMA_NODELAY) { + /* + * Start the DMA channel. Ignore the return status since we know the + * list exists and has at least one entry and we don't care if the + * channel is already started. The DMA component accesses data here + * that can be modified at interrupt or task levels, so a critical + * section is required. + */ + (void) XDmaChannel_SgStart(&InstancePtr->SendChannel); + } + } + + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Add a descriptor, with an attached empty buffer, into the receive descriptor +* list. The buffer attached to the descriptor must be word-aligned. This is +* used by the upper layer software during initialization when first setting up +* the receive descriptors, and also during reception of frames to replace +* filled buffers with empty buffers. This function can be called when the +* device is started or stopped. Note that it does start the scatter-gather DMA +* engine. Although this is not necessary during initialization, it is not a +* problem during initialization because the MAC receiver is not yet started. +* +* The buffer attached to the descriptor must be word-aligned on both the front +* end and the back end. +* +* Notification of received frames are done asynchronously through the receive +* callback function. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param BdPtr is a pointer to the buffer descriptor that will be added to the +* descriptor list. +* +* @return +* +* - XST_SUCCESS if a descriptor was successfully returned to the driver +* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode +* - XST_DMA_SG_LIST_FULL if the receive descriptor list is full +* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into +* the list because a locked descriptor exists at the insert point. +* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the +* list, the DMA channel believes there are no new descriptors to commit. +* +* @internal +* +* A status that should never be returned from this function, although +* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device +* requires a list to be created, and this function requires the device to be +* started. +* +******************************************************************************/ +XStatus +XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr) +{ + XStatus Result; + u32 BdControl; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BdPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Be sure the device is configured for scatter-gather DMA + */ + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + /* + * Set some descriptor control word defaults (destination address increment + * and local source address) and the source address (the FIFO). These are + * the same for every receive descriptor. + */ + BdControl = XBufDescriptor_GetControl(BdPtr); + XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_RECV_BD_MASK); + XBufDescriptor_SetSrcAddress(BdPtr, + InstancePtr->BaseAddress + + XEM_PFIFO_RXDATA_OFFSET); + + /* + * Put the descriptor into the channel's descriptor list and commit. + * Although this function is likely called within interrupt context, there + * is the possibility that the upper layer software queues it to a task. + * In this case, a critical section is needed here to protect shared data + * in the DMA component. + */ + XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress); + + Result = XDmaChannel_PutDescriptor(&InstancePtr->RecvChannel, BdPtr); + if (Result != XST_SUCCESS) { + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + return Result; + } + + Result = XDmaChannel_CommitPuts(&InstancePtr->RecvChannel); + if (Result != XST_SUCCESS) { + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + return Result; + } + + /* + * Start the DMA channel. Ignore the return status since we know the list + * exists and has at least one entry and we don't care if the channel is + * already started. The DMA component accesses data here that can be + * modified at interrupt or task levels, so a critical section is required. + */ + (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel); + + XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* The interrupt handler for the Ethernet driver when configured with scatter- +* gather DMA. +* +* Get the interrupt status from the IpIf to determine the source of the +* interrupt. The source can be: MAC, Recv Packet FIFO, Send Packet FIFO, Recv +* DMA channel, or Send DMA channel. The packet FIFOs only interrupt during +* "deadlock" conditions. +* +* @param InstancePtr is a pointer to the XEmac instance that just interrupted. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XEmac_IntrHandlerDma(void *InstancePtr) +{ + u32 IntrStatus; + XEmac *EmacPtr = (XEmac *) InstancePtr; + + EmacPtr->Stats.TotalIntrs++; + + /* + * Get the interrupt status from the IPIF. There is no clearing of + * interrupts in the IPIF. Interrupts must be cleared at the source. + */ + IntrStatus = XIIF_V123B_READ_DIPR(EmacPtr->BaseAddress); + + /* + * See which type of interrupt is being requested, and service it + */ + if (IntrStatus & XEM_IPIF_RECV_DMA_MASK) { /* Receive DMA interrupt */ + EmacPtr->Stats.RecvInterrupts++; + HandleDmaRecvIntr(EmacPtr); + } + + if (IntrStatus & XEM_IPIF_SEND_DMA_MASK) { /* Send DMA interrupt */ + EmacPtr->Stats.XmitInterrupts++; + HandleDmaSendIntr(EmacPtr); + } + + if (IntrStatus & XEM_IPIF_EMAC_MASK) { /* MAC interrupt */ + EmacPtr->Stats.EmacInterrupts++; + HandleEmacDmaIntr(EmacPtr); + } + + if (IntrStatus & XEM_IPIF_RECV_FIFO_MASK) { /* Receive FIFO interrupt */ + EmacPtr->Stats.RecvInterrupts++; + XEmac_CheckFifoRecvError(EmacPtr); + } + + if (IntrStatus & XEM_IPIF_SEND_FIFO_MASK) { /* Send FIFO interrupt */ + EmacPtr->Stats.XmitInterrupts++; + XEmac_CheckFifoSendError(EmacPtr); + } + + if (IntrStatus & XIIF_V123B_ERROR_MASK) { + /* + * An error occurred internal to the IPIF. This is more of a debug and + * integration issue rather than a production error. Don't do anything + * other than clear it, which provides a spot for software to trap + * on the interrupt and begin debugging. + */ + XIIF_V123B_WRITE_DISR(EmacPtr->BaseAddress, + XIIF_V123B_ERROR_MASK); + } +} + +/*****************************************************************************/ +/** +* +* Set the packet count threshold for this device. The device must be stopped +* before setting the threshold. The packet count threshold is used for interrupt +* coalescing, which reduces the frequency of interrupts from the device to the +* processor. In this case, the scatter-gather DMA engine only interrupts when +* the packet count threshold is reached, instead of interrupting for each packet. +* A packet is a generic term used by the scatter-gather DMA engine, and is +* equivalent to an Ethernet frame in our case. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param Direction indicates the channel, send or receive, from which the +* threshold register is read. +* @param Threshold is the value of the packet threshold count used during +* interrupt coalescing. A value of 0 disables the use of packet threshold +* by the hardware. +* +* @return +* +* - XST_SUCCESS if the threshold was successfully set +* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA +* - XST_DEVICE_IS_STARTED if the device has not been stopped +* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on +* asserts would also catch this error. +* +* @note +* +* The packet threshold could be set to larger than the number of descriptors +* allocated to the DMA channel. In this case, the wait bound will take over +* and always indicate data arrival. There was a check in this function that +* returned an error if the treshold was larger than the number of descriptors, +* but that was removed because users would then have to set the threshold +* only after they set descriptor space, which is an order dependency that +* caused confustion. +* +******************************************************************************/ +XStatus +XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold) +{ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Be sure device is configured for scatter-gather DMA and has been stopped + */ + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STARTED; + } + + /* + * Based on the direction, set the packet threshold in the + * corresponding DMA channel component. Default to the receive + * channel threshold register (if an invalid Direction is passed). + */ + switch (Direction) { + case XEM_SEND: + return XDmaChannel_SetPktThreshold(&InstancePtr->SendChannel, + Threshold); + + case XEM_RECV: + return XDmaChannel_SetPktThreshold(&InstancePtr->RecvChannel, + Threshold); + + default: + return XST_INVALID_PARAM; + } +} + +/*****************************************************************************/ +/** +* +* Get the value of the packet count threshold for this driver/device. The packet +* count threshold is used for interrupt coalescing, which reduces the frequency +* of interrupts from the device to the processor. In this case, the +* scatter-gather DMA engine only interrupts when the packet count threshold is +* reached, instead of interrupting for each packet. A packet is a generic term +* used by the scatter-gather DMA engine, and is equivalent to an Ethernet frame +* in our case. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param Direction indicates the channel, send or receive, from which the +* threshold register is read. +* @param ThreshPtr is a pointer to the byte into which the current value of the +* packet threshold register will be copied. An output parameter. A value +* of 0 indicates the use of packet threshold by the hardware is disabled. +* +* @return +* +* - XST_SUCCESS if the packet threshold was retrieved successfully +* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA +* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on +* asserts would also catch this error. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 * ThreshPtr) +{ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); + XASSERT_NONVOID(ThreshPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + /* + * Based on the direction, return the packet threshold set in the + * corresponding DMA channel component. Default to the value in + * the receive channel threshold register (if an invalid Direction + * is passed). + */ + switch (Direction) { + case XEM_SEND: + *ThreshPtr = + XDmaChannel_GetPktThreshold(&InstancePtr->SendChannel); + break; + + case XEM_RECV: + *ThreshPtr = + XDmaChannel_GetPktThreshold(&InstancePtr->RecvChannel); + break; + + default: + return XST_INVALID_PARAM; + } + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Set the packet wait bound timer for this driver/device. The device must be +* stopped before setting the timer value. The packet wait bound is used during +* interrupt coalescing to trigger an interrupt when not enough packets have been +* received to reach the packet count threshold. A packet is a generic term used +* by the scatter-gather DMA engine, and is equivalent to an Ethernet frame in +* our case. The timer is in milliseconds. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param Direction indicates the channel, send or receive, from which the +* threshold register is read. +* @param TimerValue is the value of the packet wait bound used during interrupt +* coalescing. It is in milliseconds in the range 0 - 1023. A value of 0 +* disables the packet wait bound timer. +* +* @return +* +* - XST_SUCCESS if the packet wait bound was set successfully +* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA +* - XST_DEVICE_IS_STARTED if the device has not been stopped +* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on +* asserts would also catch this error. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 TimerValue) +{ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); + XASSERT_NONVOID(TimerValue <= XEM_SGDMA_MAX_WAITBOUND); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Be sure device is configured for scatter-gather DMA and has been stopped + */ + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STARTED; + } + + /* + * Based on the direction, set the packet wait bound in the + * corresponding DMA channel component. Default to the receive + * channel wait bound register (if an invalid Direction is passed). + */ + switch (Direction) { + case XEM_SEND: + XDmaChannel_SetPktWaitBound(&InstancePtr->SendChannel, + TimerValue); + break; + + case XEM_RECV: + XDmaChannel_SetPktWaitBound(&InstancePtr->RecvChannel, + TimerValue); + break; + + default: + return XST_INVALID_PARAM; + } + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Get the packet wait bound timer for this driver/device. The packet wait bound +* is used during interrupt coalescing to trigger an interrupt when not enough +* packets have been received to reach the packet count threshold. A packet is a +* generic term used by the scatter-gather DMA engine, and is equivalent to an +* Ethernet frame in our case. The timer is in milliseconds. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param Direction indicates the channel, send or receive, from which the +* threshold register is read. +* @param WaitPtr is a pointer to the byte into which the current value of the +* packet wait bound register will be copied. An output parameter. Units +* are in milliseconds in the range 0 - 1023. A value of 0 indicates the +* packet wait bound timer is disabled. +* +* @return +* +* - XST_SUCCESS if the packet wait bound was retrieved successfully +* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA +* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on +* asserts would also catch this error. +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 * WaitPtr) +{ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); + XASSERT_NONVOID(WaitPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + /* + * Based on the direction, return the packet wait bound set in the + * corresponding DMA channel component. Default to the value in + * the receive channel wait bound register (if an invalid Direction + * is passed). + */ + switch (Direction) { + case XEM_SEND: + *WaitPtr = + XDmaChannel_GetPktWaitBound(&InstancePtr->SendChannel); + break; + + case XEM_RECV: + *WaitPtr = + XDmaChannel_GetPktWaitBound(&InstancePtr->RecvChannel); + break; + + default: + return XST_INVALID_PARAM; + } + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Give the driver the memory space to be used for the scatter-gather DMA +* receive descriptor list. This function should only be called once, during +* initialization of the Ethernet driver. The memory space must be big enough +* to hold some number of descriptors, depending on the needs of the system. +* The xemac.h file defines minimum and default numbers of descriptors +* which can be used to allocate this memory space. +* +* The memory space must be word-aligned. An assert will occur if asserts are +* turned on and the memory is not word-aligned. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param MemoryPtr is a pointer to the word-aligned memory. +* @param ByteCount is the length, in bytes, of the memory space. +* +* @return +* +* - XST_SUCCESS if the space was initialized successfully +* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA +* - XST_DMA_SG_LIST_EXISTS if this list space has already been created +* +* @note +* +* If the device is configured for scatter-gather DMA, this function must be +* called AFTER the XEmac_Initialize() function because the DMA channel +* components must be initialized before the memory space is set. +* +******************************************************************************/ +XStatus +XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount) +{ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(MemoryPtr != NULL); + XASSERT_NONVOID(ByteCount != 0); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + return XDmaChannel_CreateSgList(&InstancePtr->RecvChannel, MemoryPtr, + ByteCount); +} + +/*****************************************************************************/ +/** +* +* Give the driver the memory space to be used for the scatter-gather DMA +* transmit descriptor list. This function should only be called once, during +* initialization of the Ethernet driver. The memory space must be big enough +* to hold some number of descriptors, depending on the needs of the system. +* The xemac.h file defines minimum and default numbers of descriptors +* which can be used to allocate this memory space. +* +* The memory space must be word-aligned. An assert will occur if asserts are +* turned on and the memory is not word-aligned. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param MemoryPtr is a pointer to the word-aligned memory. +* @param ByteCount is the length, in bytes, of the memory space. +* +* @return +* +* - XST_SUCCESS if the space was initialized successfully +* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA +* - XST_DMA_SG_LIST_EXISTS if this list space has already been created +* +* @note +* +* If the device is configured for scatter-gather DMA, this function must be +* called AFTER the XEmac_Initialize() function because the DMA channel +* components must be initialized before the memory space is set. +* +******************************************************************************/ +XStatus +XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount) +{ + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(MemoryPtr != NULL); + XASSERT_NONVOID(ByteCount != 0); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + if (!XEmac_mIsSgDma(InstancePtr)) { + return XST_NOT_SGDMA; + } + + return XDmaChannel_CreateSgList(&InstancePtr->SendChannel, MemoryPtr, + ByteCount); +} + +/*****************************************************************************/ +/** +* +* Set the callback function for handling received frames in scatter-gather DMA +* mode. The upper layer software should call this function during +* initialization. The callback is called once per frame received. The head of +* a descriptor list is passed in along with the number of descriptors in the +* list. Before leaving the callback, the upper layer software should attach a +* new buffer to each descriptor in the list. +* +* The callback is invoked by the driver within interrupt context, so it needs +* to do its job quickly. Sending the received frame up the protocol stack +* should be done at task-level. If there are other potentially slow operations +* within the callback, these too should be done at task-level. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param CallBackRef is a reference pointer to be passed back to the adapter in +* the callback. This helps the adapter correlate the callback to a +* particular driver. +* @param FuncPtr is the pointer to the callback function. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_SgHandler FuncPtr) +{ + /* + * Asserted IsDmaSg here instead of run-time check because there is really + * no ill-effects of setting these when not configured for scatter-gather. + */ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(FuncPtr != NULL); + XASSERT_VOID(XEmac_mIsSgDma(InstancePtr)); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + InstancePtr->SgRecvHandler = FuncPtr; + InstancePtr->SgRecvRef = CallBackRef; +} + +/*****************************************************************************/ +/** +* +* Set the callback function for handling confirmation of transmitted frames in +* scatter-gather DMA mode. The upper layer software should call this function +* during initialization. The callback is called once per frame sent. The head +* of a descriptor list is passed in along with the number of descriptors in +* the list. The callback is responsible for freeing buffers attached to these +* descriptors. +* +* The callback is invoked by the driver within interrupt context, so it needs +* to do its job quickly. If there are potentially slow operations within the +* callback, these should be done at task-level. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param CallBackRef is a reference pointer to be passed back to the adapter in +* the callback. This helps the adapter correlate the callback to a +* particular driver. +* @param FuncPtr is the pointer to the callback function. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +void +XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef, + XEmac_SgHandler FuncPtr) +{ + /* + * Asserted IsDmaSg here instead of run-time check because there is really + * no ill-effects of setting these when not configured for scatter-gather. + */ + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(FuncPtr != NULL); + XASSERT_VOID(XEmac_mIsSgDma(InstancePtr)); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + InstancePtr->SgSendHandler = FuncPtr; + InstancePtr->SgSendRef = CallBackRef; +} + +/*****************************************************************************/ +/* +* +* Handle an interrupt from the DMA receive channel. DMA interrupts are: +* +* - DMA error. DMA encountered a bus error or timeout. This is a fatal error +* that requires reset of the channel. The driver calls the error handler +* of the upper layer software with an error code indicating the device should +* be reset. +* - Packet count threshold reached. For scatter-gather operations, indicates +* the threshold for the number of packets not serviced by software has been +* reached. The driver behaves as follows: +* - Get the value of the packet counter, which tells us how many packets +* are ready to be serviced +* - For each packet +* - For each descriptor, remove it from the scatter-gather list +* - Check for the last descriptor in the frame, and if set +* - Bump frame statistics +* - Call the scatter-gather receive callback function +* - Decrement the packet counter by one +* Note that there are no receive errors reported in the status word of +* the buffer descriptor. If receive errors occur, the MAC drops the +* packet, and we only find out about the errors through various error +* count registers. +* - Packet wait bound reached. For scatter-gather, indicates the time to wait +* for the next packet has expired. The driver follows the same logic as when +* the packet count threshold interrupt is received. +* - Scatter-gather end acknowledge. Hardware has reached the end of the +* descriptor list. The driver follows the same logic as when the packet count +* threshold interrupt is received. In addition, the driver restarts the DMA +* scatter-gather channel in case there are newly inserted descriptors. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* Although the function returns void, there are asynchronous errors that can +* be generated (by calling the ErrorHandler) from this function. These are: +* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from the +* DMA channel, but there was not one ready for software. +* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a fatal +* error that requires reset. +* +* @note +* +* None. +* +******************************************************************************/ +static void +HandleDmaRecvIntr(XEmac * InstancePtr) +{ + u32 IntrStatus; + + /* + * Read the interrupt status + */ + IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->RecvChannel); + + /* + * For packet threshold or wait bound interrupts, process desciptors. Also + * process descriptors on a SG end acknowledgement, which means the end of + * the descriptor list has been reached by the hardware. For receive, this + * is potentially trouble since it means the descriptor list is full, + * unless software can process enough packets quickly enough so the + * hardware has room to put new packets. + */ + if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK | + XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) { + XStatus Result = XST_SUCCESS; + u32 NumFrames; + u32 NumProcessed; + u32 NumBuffers; + u32 NumBytes; + u32 IsLast; + XBufDescriptor *FirstBdPtr; + XBufDescriptor *BdPtr; + + /* + * Get the number of unserviced packets + */ + NumFrames = XDmaChannel_GetPktCount(&InstancePtr->RecvChannel); + + for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) { + IsLast = FALSE; + FirstBdPtr = NULL; + NumBuffers = 0; + NumBytes = 0; + + /* + * For each packet, get the descriptor from the list. On the + * last one in the frame, make the callback to the upper layer. + */ + while (!IsLast) { + Result = + XDmaChannel_GetDescriptor(&InstancePtr-> + RecvChannel, + &BdPtr); + if (Result != XST_SUCCESS) { + /* + * An error getting a buffer descriptor from the list. + * This should not happen, but if it does, report it to + * the error callback and break out of the loops to service + * other interrupts. + */ + InstancePtr->ErrorHandler(InstancePtr-> + ErrorRef, + Result); + break; + } + + /* + * Keep a pointer to the first descriptor in the list, as it + * will be passed to the upper layers in a bit. By the fact + * that we received this packet means no errors occurred, so + * no need to check the device status word for errors. + */ + if (FirstBdPtr == NULL) { + FirstBdPtr = BdPtr; + } + + NumBytes += XBufDescriptor_GetLength(BdPtr); + + /* + * Check to see if this is the last descriptor in the frame, + * and if so, set the IsLast flag to get out of the loop. + */ + if (XBufDescriptor_IsLastStatus(BdPtr)) { + IsLast = TRUE; + } + + /* + * Bump the number of buffers in this packet + */ + NumBuffers++; + + } /* end while loop */ + + /* + * Check for error that occurred inside the while loop, and break + * out of the for loop if there was one so other interrupts can + * be serviced. + */ + if (Result != XST_SUCCESS) { + break; + } + + InstancePtr->Stats.RecvFrames++; + InstancePtr->Stats.RecvBytes += NumBytes; + + /* + * Make the callback to the upper layers, passing it the first + * descriptor in the packet and the number of descriptors in the + * packet. + */ + InstancePtr->SgRecvHandler(InstancePtr->SgRecvRef, + FirstBdPtr, NumBuffers); + + /* + * Decrement the packet count register to reflect the fact we + * just processed a packet + */ + XDmaChannel_DecrementPktCount(&InstancePtr-> + RecvChannel); + + } /* end for loop */ + + /* + * If the interrupt was an end-ack, check the descriptor list again to + * see if it is empty. If not, go ahead and restart the scatter-gather + * channel. This is to fix a possible race condition where, on receive, + * the driver attempted to start a scatter-gather channel that was + * already started, which resulted in no action from the XDmaChannel + * component. But, just after the XDmaChannel component saw that the + * hardware was already started, the hardware stopped because it + * reached the end of the list. In that case, this interrupt is + * generated and we can restart the hardware here. + */ + if (IntrStatus & XDC_IXR_SG_END_MASK) { + /* + * Ignore the return status since we know the list exists and we + * don't care if the list is empty or the channel is already started. + */ + (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel); + } + } + + /* + * All interrupts are handled (except the error below) so acknowledge + * (clear) the interrupts by writing the value read above back to the status + * register. The packet count interrupt must be acknowledged after the + * decrement, otherwise it will come right back. We clear the interrupts + * before we handle the error interrupt because the ErrorHandler should + * result in a reset, which clears the interrupt status register. So we + * don't want to toggle the interrupt back on by writing the interrupt + * status register with an old value after a reset. + */ + XDmaChannel_SetIntrStatus(&InstancePtr->RecvChannel, IntrStatus); + + /* + * Check for DMA errors and call the error callback function if an error + * occurred (DMA bus or timeout error), which should result in a reset of + * the device by the upper layer software. + */ + if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) { + InstancePtr->Stats.DmaErrors++; + InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR); + } +} + +/*****************************************************************************/ +/* +* +* Handle an interrupt from the DMA send channel. DMA interrupts are: +* +* - DMA error. DMA encountered a bus error or timeout. This is a fatal error +* that requires reset of the channel. The driver calls the error handler +* of the upper layer software with an error code indicating the device should +* be reset. +* - Packet count threshold reached. For scatter-gather operations, indicates +* the threshold for the number of packets not serviced by software has been +* reached. The driver behaves as follows: +* - Get the value of the packet counter, which tells us how many packets +* are ready to be serviced +* - For each packet +* - For each descriptor, remove it from the scatter-gather list +* - Check for the last descriptor in the frame, and if set +* - Bump frame statistics +* - Call the scatter-gather receive callback function +* - Decrement the packet counter by one +* Note that there are no receive errors reported in the status word of +* the buffer descriptor. If receive errors occur, the MAC drops the +* packet, and we only find out about the errors through various error +* count registers. +* - Packet wait bound reached. For scatter-gather, indicates the time to wait +* for the next packet has expired. The driver follows the same logic as when +* the packet count threshold interrupt is received. +* - Scatter-gather end acknowledge. Hardware has reached the end of the +* descriptor list. The driver follows the same logic as when the packet count +* threshold interrupt is received. In addition, the driver restarts the DMA +* scatter-gather channel in case there are newly inserted descriptors. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* Although the function returns void, there are asynchronous errors +* that can be generated from this function. These are: +* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from +* the DMA channel, but there was not one ready for software. +* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a +* fatal error that requires reset. +* +* @note +* +* None. +* +******************************************************************************/ +static void +HandleDmaSendIntr(XEmac * InstancePtr) +{ + u32 IntrStatus; + + /* + * Read the interrupt status + */ + IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->SendChannel); + + /* + * For packet threshold or wait bound interrupt, process descriptors. Also + * process descriptors on a SG end acknowledgement, which means the end of + * the descriptor list has been reached by the hardware. For transmit, + * this is a normal condition during times of light traffic. In fact, the + * wait bound interrupt may be masked for transmit since the end-ack would + * always occur before the wait bound expires. + */ + if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK | + XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) { + XStatus Result = XST_SUCCESS; + u32 NumFrames; + u32 NumProcessed; + u32 NumBuffers; + u32 NumBytes; + u32 IsLast; + XBufDescriptor *FirstBdPtr; + XBufDescriptor *BdPtr; + + /* + * Get the number of unserviced packets + */ + NumFrames = XDmaChannel_GetPktCount(&InstancePtr->SendChannel); + + for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) { + IsLast = FALSE; + FirstBdPtr = NULL; + NumBuffers = 0; + NumBytes = 0; + + /* + * For each frame, traverse the descriptor list and look for + * errors. On the last one in the frame, make the callback. + */ + while (!IsLast) { + Result = + XDmaChannel_GetDescriptor(&InstancePtr-> + SendChannel, + &BdPtr); + if (Result != XST_SUCCESS) { + /* + * An error getting a buffer descriptor from the list. + * This should not happen, but if it does, report it to + * the error callback and break out of the loops to service + * other interrupts + */ + InstancePtr->ErrorHandler(InstancePtr-> + ErrorRef, + Result); + break; + } + + /* + * Keep a pointer to the first descriptor in the list and + * check the device status for errors. The device status is + * only available in the first descriptor of a packet. + */ + if (FirstBdPtr == NULL) { + u32 XmitStatus; + + FirstBdPtr = BdPtr; + + XmitStatus = + XBufDescriptor_GetDeviceStatus + (BdPtr); + if (XmitStatus & + XEM_TSR_EXCESS_DEFERRAL_MASK) { + InstancePtr->Stats. + XmitExcessDeferral++; + } + + if (XmitStatus & + XEM_TSR_LATE_COLLISION_MASK) { + InstancePtr->Stats. + XmitLateCollisionErrors++; + } + } + + NumBytes += XBufDescriptor_GetLength(BdPtr); + + /* + * Check to see if this is the last descriptor in the frame, + * and if so, set the IsLast flag to get out of the loop. The + * transmit channel must check the last bit in the control + * word, not the status word (the DMA engine does not update + * the last bit in the status word for the transmit direction). + */ + if (XBufDescriptor_IsLastControl(BdPtr)) { + IsLast = TRUE; + } + + /* + * Bump the number of buffers in this packet + */ + NumBuffers++; + + } /* end while loop */ + + /* + * Check for error that occurred inside the while loop, and break + * out of the for loop if there was one so other interrupts can + * be serviced. + */ + if (Result != XST_SUCCESS) { + break; + } + + InstancePtr->Stats.XmitFrames++; + InstancePtr->Stats.XmitBytes += NumBytes; + + /* + * Make the callback to the upper layers, passing it the first + * descriptor in the packet and the number of descriptors in the + * packet. + */ + InstancePtr->SgSendHandler(InstancePtr->SgSendRef, + FirstBdPtr, NumBuffers); + + /* + * Decrement the packet count register to reflect the fact we + * just processed a packet + */ + XDmaChannel_DecrementPktCount(&InstancePtr-> + SendChannel); + + } /* end for loop */ + + /* + * If the interrupt was an end-ack, check the descriptor list again to + * see if it is empty. If not, go ahead and restart the scatter-gather + * channel. This is to fix a possible race condition where, on transmit, + * the driver attempted to start a scatter-gather channel that was + * already started, which resulted in no action from the XDmaChannel + * component. But, just after the XDmaChannel component saw that the + * hardware was already started, the hardware stopped because it + * reached the end of the list. In that case, this interrupt is + * generated and we can restart the hardware here. + */ + if (IntrStatus & XDC_IXR_SG_END_MASK) { + /* + * Ignore the return status since we know the list exists and we + * don't care if the list is empty or the channel is already started. + */ + (void) XDmaChannel_SgStart(&InstancePtr->SendChannel); + } + } + + /* + * All interrupts are handled (except the error below) so acknowledge + * (clear) the interrupts by writing the value read above back to the status + * register. The packet count interrupt must be acknowledged after the + * decrement, otherwise it will come right back. We clear the interrupts + * before we handle the error interrupt because the ErrorHandler should + * result in a reset, which clears the interrupt status register. So we + * don't want to toggle the interrupt back on by writing the interrupt + * status register with an old value after a reset. + */ + XDmaChannel_SetIntrStatus(&InstancePtr->SendChannel, IntrStatus); + + /* + * Check for DMA errors and call the error callback function if an error + * occurred (DMA bus or timeout error), which should result in a reset of + * the device by the upper layer software. + */ + if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) { + InstancePtr->Stats.DmaErrors++; + InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR); + } +} + +/*****************************************************************************/ +/* +* +* Handle an interrupt from the Ethernet MAC when configured with scatter-gather +* DMA. The only interrupts handled in this case are errors. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* None. +* +* @note +* +* None. +* +******************************************************************************/ +static void +HandleEmacDmaIntr(XEmac * InstancePtr) +{ + u32 IntrStatus; + + /* + * When configured with DMA, the EMAC generates interrupts only when errors + * occur. We clear the interrupts immediately so that any latched status + * interrupt bits will reflect the true status of the device, and so any + * pulsed interrupts (non-status) generated during the Isr will not be lost. + */ + IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress); + XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, IntrStatus); + + /* + * Check the MAC for errors + */ + XEmac_CheckEmacError(InstancePtr, IntrStatus); +} diff --git a/board/xilinx/xilinx_enet/xemac_l.h b/board/xilinx/xilinx_enet/xemac_l.h new file mode 100644 index 00000000000..a463937dbd9 --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac_l.h @@ -0,0 +1,462 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac_l.h +* +* This header file contains identifiers and low-level driver functions (or +* macros) that can be used to access the device. High-level driver functions +* are defined in xemac.h. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver	Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b rpm  04/26/02 First release
+* 1.00b rmm  09/23/02 Added XEmac_mPhyReset macro
+* 1.00c rpm  12/05/02 New version includes support for simple DMA
+* 
+* +******************************************************************************/ + +#ifndef XEMAC_L_H /* prevent circular inclusions */ +#define XEMAC_L_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xio.h" + +/************************** Constant Definitions *****************************/ + +/* Offset of the MAC registers from the IPIF base address */ +#define XEM_REG_OFFSET 0x1100UL + +/* + * Register offsets for the Ethernet MAC. Each register is 32 bits. + */ +#define XEM_EMIR_OFFSET (XEM_REG_OFFSET + 0x0) /* EMAC Module ID */ +#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */ +#define XEM_IFGP_OFFSET (XEM_REG_OFFSET + 0x8) /* Interframe Gap */ +#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */ +#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */ +#define XEM_MGTCR_OFFSET (XEM_REG_OFFSET + 0x14) /* MII mgmt control */ +#define XEM_MGTDR_OFFSET (XEM_REG_OFFSET + 0x18) /* MII mgmt data */ +#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */ +#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */ +#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */ +#define XEM_RMFC_OFFSET (XEM_REG_OFFSET + 0x28) /* Rx missed frames */ +#define XEM_RCC_OFFSET (XEM_REG_OFFSET + 0x2C) /* Rx collisions */ +#define XEM_RFCSEC_OFFSET (XEM_REG_OFFSET + 0x30) /* Rx FCS errors */ +#define XEM_RAEC_OFFSET (XEM_REG_OFFSET + 0x34) /* Rx alignment errors */ +#define XEM_TEDC_OFFSET (XEM_REG_OFFSET + 0x38) /* Transmit excess + * deferral cnt */ + +/* + * Register offsets for the IPIF components + */ +#define XEM_ISR_OFFSET 0x20UL /* Interrupt status */ + +#define XEM_DMA_OFFSET 0x2300UL +#define XEM_DMA_SEND_OFFSET (XEM_DMA_OFFSET + 0x0) /* DMA send channel */ +#define XEM_DMA_RECV_OFFSET (XEM_DMA_OFFSET + 0x40) /* DMA recv channel */ + +#define XEM_PFIFO_OFFSET 0x2000UL +#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0) /* Tx registers */ +#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10) /* Rx registers */ +#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100) /* Tx keyhole */ +#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200) /* Rx keyhole */ + +/* + * EMAC Module Identification Register (EMIR) + */ +#define XEM_EMIR_VERSION_MASK 0xFFFF0000UL /* Device version */ +#define XEM_EMIR_TYPE_MASK 0x0000FF00UL /* Device type */ + +/* + * EMAC Control Register (ECR) + */ +#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL /* Full duplex mode */ +#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL /* Reset transmitter */ +#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL /* Enable transmitter */ +#define XEM_ECR_RECV_RESET_MASK 0x10000000UL /* Reset receiver */ +#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL /* Enable receiver */ +#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL /* Enable PHY */ +#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL /* Enable xmit pad insert */ +#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL /* Enable xmit FCS insert */ +#define XEM_ECR_XMIT_ADDR_INSERT_MASK 0x00800000UL /* Enable xmit source addr + * insertion */ +#define XEM_ECR_XMIT_ERROR_INSERT_MASK 0x00400000UL /* Insert xmit error */ +#define XEM_ECR_XMIT_ADDR_OVWRT_MASK 0x00200000UL /* Enable xmit source addr + * overwrite */ +#define XEM_ECR_LOOPBACK_MASK 0x00100000UL /* Enable internal + * loopback */ +#define XEM_ECR_RECV_STRIP_ENABLE_MASK 0x00080000UL /* Enable recv pad/fcs strip */ +#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL /* Enable unicast addr */ +#define XEM_ECR_MULTI_ENABLE_MASK 0x00010000UL /* Enable multicast addr */ +#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL /* Enable broadcast addr */ +#define XEM_ECR_PROMISC_ENABLE_MASK 0x00004000UL /* Enable promiscuous mode */ +#define XEM_ECR_RECV_ALL_MASK 0x00002000UL /* Receive all frames */ +#define XEM_ECR_RESERVED2_MASK 0x00001000UL /* Reserved */ +#define XEM_ECR_MULTI_HASH_ENABLE_MASK 0x00000800UL /* Enable multicast hash */ +#define XEM_ECR_PAUSE_FRAME_MASK 0x00000400UL /* Interpret pause frames */ +#define XEM_ECR_CLEAR_HASH_MASK 0x00000200UL /* Clear hash table */ +#define XEM_ECR_ADD_HASH_ADDR_MASK 0x00000100UL /* Add hash table address */ + +/* + * Interframe Gap Register (IFGR) + */ +#define XEM_IFGP_PART1_MASK 0xF8000000UL /* Interframe Gap Part1 */ +#define XEM_IFGP_PART1_SHIFT 27 +#define XEM_IFGP_PART2_MASK 0x07C00000UL /* Interframe Gap Part2 */ +#define XEM_IFGP_PART2_SHIFT 22 + +/* + * Station Address High Register (SAH) + */ +#define XEM_SAH_ADDR_MASK 0x0000FFFFUL /* Station address high bytes */ + +/* + * Station Address Low Register (SAL) + */ +#define XEM_SAL_ADDR_MASK 0xFFFFFFFFUL /* Station address low bytes */ + +/* + * MII Management Control Register (MGTCR) + */ +#define XEM_MGTCR_START_MASK 0x80000000UL /* Start/Busy */ +#define XEM_MGTCR_RW_NOT_MASK 0x40000000UL /* Read/Write Not (direction) */ +#define XEM_MGTCR_PHY_ADDR_MASK 0x3E000000UL /* PHY address */ +#define XEM_MGTCR_PHY_ADDR_SHIFT 25 /* PHY address shift */ +#define XEM_MGTCR_REG_ADDR_MASK 0x01F00000UL /* Register address */ +#define XEM_MGTCR_REG_ADDR_SHIFT 20 /* Register addr shift */ +#define XEM_MGTCR_MII_ENABLE_MASK 0x00080000UL /* Enable MII from EMAC */ +#define XEM_MGTCR_RD_ERROR_MASK 0x00040000UL /* MII mgmt read error */ + +/* + * MII Management Data Register (MGTDR) + */ +#define XEM_MGTDR_DATA_MASK 0x0000FFFFUL /* MII data */ + +/* + * Receive Packet Length Register (RPLR) + */ +#define XEM_RPLR_LENGTH_MASK 0x0000FFFFUL /* Receive packet length */ + +/* + * Transmit Packet Length Register (TPLR) + */ +#define XEM_TPLR_LENGTH_MASK 0x0000FFFFUL /* Transmit packet length */ + +/* + * Transmit Status Register (TSR) + */ +#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL /* Transmit excess deferral */ +#define XEM_TSR_FIFO_UNDERRUN_MASK 0x40000000UL /* Packet FIFO underrun */ +#define XEM_TSR_ATTEMPTS_MASK 0x3E000000UL /* Transmission attempts */ +#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL /* Transmit late collision */ + +/* + * Receive Missed Frame Count (RMFC) + */ +#define XEM_RMFC_DATA_MASK 0x0000FFFFUL + +/* + * Receive Collision Count (RCC) + */ +#define XEM_RCC_DATA_MASK 0x0000FFFFUL + +/* + * Receive FCS Error Count (RFCSEC) + */ +#define XEM_RFCSEC_DATA_MASK 0x0000FFFFUL + +/* + * Receive Alignment Error Count (RALN) + */ +#define XEM_RAEC_DATA_MASK 0x0000FFFFUL + +/* + * Transmit Excess Deferral Count (TEDC) + */ +#define XEM_TEDC_DATA_MASK 0x0000FFFFUL + +/* + * EMAC Interrupt Registers (Status and Enable) masks. These registers are + * part of the IPIF IP Interrupt registers + */ +#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL /* Xmit complete */ +#define XEM_EIR_RECV_DONE_MASK 0x00000002UL /* Recv complete */ +#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL /* Xmit error */ +#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL /* Recv error */ +#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL /* Xmit status fifo empty */ +#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL /* Recv length fifo empty */ +#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL /* Xmit length fifo full */ +#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL /* Recv length fifo + * overrun */ +#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL /* Recv length fifo + * underrun */ +#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL /* Xmit status fifo + * overrun */ +#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL /* Transmit status fifo + * underrun */ +#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL /* Transmit length fifo + * overrun */ +#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL /* Transmit length fifo + * underrun */ +#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL /* Transmit pause pkt + * received */ +#define XEM_EIR_RECV_DFIFO_OVER_MASK 0x00004000UL /* Receive data fifo + * overrun */ +#define XEM_EIR_RECV_MISSED_FRAME_MASK 0x00008000UL /* Receive missed frame + * error */ +#define XEM_EIR_RECV_COLLISION_MASK 0x00010000UL /* Receive collision + * error */ +#define XEM_EIR_RECV_FCS_ERROR_MASK 0x00020000UL /* Receive FCS error */ +#define XEM_EIR_RECV_LEN_ERROR_MASK 0x00040000UL /* Receive length field + * error */ +#define XEM_EIR_RECV_SHORT_ERROR_MASK 0x00080000UL /* Receive short frame + * error */ +#define XEM_EIR_RECV_LONG_ERROR_MASK 0x00100000UL /* Receive long frame + * error */ +#define XEM_EIR_RECV_ALIGN_ERROR_MASK 0x00200000UL /* Receive alignment + * error */ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/***************************************************************************** +* +* Low-level driver macros and functions. The list below provides signatures +* to help the user use the macros. +* +* u32 XEmac_mReadReg(u32 BaseAddress, int RegOffset) +* void XEmac_mWriteReg(u32 BaseAddress, int RegOffset, u32 Mask) +* +* void XEmac_mSetControlReg(u32 BaseAddress, u32 Mask) +* void XEmac_mSetMacAddress(u32 BaseAddress, u8 *AddressPtr) +* +* void XEmac_mEnable(u32 BaseAddress) +* void XEmac_mDisable(u32 BaseAddress) +* +* u32 XEmac_mIsTxDone(u32 BaseAddress) +* u32 XEmac_mIsRxEmpty(u32 BaseAddress) +* +* void XEmac_SendFrame(u32 BaseAddress, u8 *FramePtr, int Size) +* int XEmac_RecvFrame(u32 BaseAddress, u8 *FramePtr) +* +*****************************************************************************/ + +/****************************************************************************/ +/** +* +* Read the given register. +* +* @param BaseAddress is the base address of the device +* @param RegOffset is the register offset to be read +* +* @return The 32-bit value of the register +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mReadReg(BaseAddress, RegOffset) \ + XIo_In32((BaseAddress) + (RegOffset)) + +/****************************************************************************/ +/** +* +* Write the given register. +* +* @param BaseAddress is the base address of the device +* @param RegOffset is the register offset to be written +* @param Data is the 32-bit value to write to the register +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mWriteReg(BaseAddress, RegOffset, Data) \ + XIo_Out32((BaseAddress) + (RegOffset), (Data)) + +/****************************************************************************/ +/** +* +* Set the contents of the control register. Use the XEM_ECR_* constants +* defined above to create the bit-mask to be written to the register. +* +* @param BaseAddress is the base address of the device +* @param Mask is the 16-bit value to write to the control register +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mSetControlReg(BaseAddress, Mask) \ + XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, (Mask)) + +/****************************************************************************/ +/** +* +* Set the station address of the EMAC device. +* +* @param BaseAddress is the base address of the device +* @param AddressPtr is a pointer to a 6-byte MAC address +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mSetMacAddress(BaseAddress, AddressPtr) \ +{ \ + u32 MacAddr; \ + \ + MacAddr = ((AddressPtr)[0] << 8) | (AddressPtr)[1]; \ + XIo_Out32((BaseAddress) + XEM_SAH_OFFSET, MacAddr); \ + \ + MacAddr = ((AddressPtr)[2] << 24) | ((AddressPtr)[3] << 16) | \ + ((AddressPtr)[4] << 8) | (AddressPtr)[5]; \ + \ + XIo_Out32((BaseAddress) + XEM_SAL_OFFSET, MacAddr); \ +} + +/****************************************************************************/ +/** +* +* Enable the transmitter and receiver. Preserve the contents of the control +* register. +* +* @param BaseAddress is the base address of the device +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mEnable(BaseAddress) \ +{ \ + u32 Control; \ + Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \ + Control &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); \ + Control |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); \ + XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \ +} + +/****************************************************************************/ +/** +* +* Disable the transmitter and receiver. Preserve the contents of the control +* register. +* +* @param BaseAddress is the base address of the device +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mDisable(BaseAddress) \ + XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, \ + XIo_In32((BaseAddress) + XEM_ECR_OFFSET) & \ + ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK)) + +/****************************************************************************/ +/** +* +* Check to see if the transmission is complete. +* +* @param BaseAddress is the base address of the device +* +* @return TRUE if it is done, or FALSE if it is not. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mIsTxDone(BaseAddress) \ + (XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_XMIT_DONE_MASK) + +/****************************************************************************/ +/** +* +* Check to see if the receive FIFO is empty. +* +* @param BaseAddress is the base address of the device +* +* @return TRUE if it is empty, or FALSE if it is not. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mIsRxEmpty(BaseAddress) \ + (!(XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_RECV_DONE_MASK)) + +/****************************************************************************/ +/** +* +* Reset MII compliant PHY +* +* @param BaseAddress is the base address of the device +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XEmac_mPhyReset(BaseAddress) \ +{ \ + u32 Control; \ + Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \ + Control &= ~XEM_ECR_PHY_ENABLE_MASK; \ + XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \ + Control |= XEM_ECR_PHY_ENABLE_MASK; \ + XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \ +} + +/************************** Function Prototypes ******************************/ + +void XEmac_SendFrame(u32 BaseAddress, u8 * FramePtr, int Size); +int XEmac_RecvFrame(u32 BaseAddress, u8 * FramePtr); + +#endif /* end of protection macro */ diff --git a/board/xilinx/xilinx_enet/xemac_options.c b/board/xilinx/xilinx_enet/xemac_options.c new file mode 100644 index 00000000000..1f225f8f521 --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac_options.c @@ -0,0 +1,318 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac_options.c +* +* Functions in this file handle configuration of the XEmac driver. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm  07/31/01 First release
+* 1.00b rpm  02/20/02 Repartitioned files and functions
+* 1.00c rpm  12/05/02 New version includes support for simple DMA
+* 
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xemac_i.h" +#include "xio.h" + +/************************** Constant Definitions *****************************/ + +#define XEM_MAX_IFG 32 /* Maximum Interframe gap value */ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Function Prototypes ******************************/ + +/************************** Variable Definitions *****************************/ + +/* + * A table of options and masks. This table maps the user-visible options with + * the control register masks. It is used in Set/GetOptions as an alternative + * to a series of if/else pairs. Note that the polled options does not have a + * corresponding entry in the control register, so it does not exist in the + * table. + */ +typedef struct { + u32 Option; + u32 Mask; +} OptionMap; + +static OptionMap OptionsTable[] = { + {XEM_UNICAST_OPTION, XEM_ECR_UNICAST_ENABLE_MASK}, + {XEM_BROADCAST_OPTION, XEM_ECR_BROAD_ENABLE_MASK}, + {XEM_PROMISC_OPTION, XEM_ECR_PROMISC_ENABLE_MASK}, + {XEM_FDUPLEX_OPTION, XEM_ECR_FULL_DUPLEX_MASK}, + {XEM_LOOPBACK_OPTION, XEM_ECR_LOOPBACK_MASK}, + {XEM_MULTICAST_OPTION, XEM_ECR_MULTI_ENABLE_MASK}, + {XEM_FLOW_CONTROL_OPTION, XEM_ECR_PAUSE_FRAME_MASK}, + {XEM_INSERT_PAD_OPTION, XEM_ECR_XMIT_PAD_ENABLE_MASK}, + {XEM_INSERT_FCS_OPTION, XEM_ECR_XMIT_FCS_ENABLE_MASK}, + {XEM_INSERT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_INSERT_MASK}, + {XEM_OVWRT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_OVWRT_MASK}, + {XEM_STRIP_PAD_FCS_OPTION, XEM_ECR_RECV_STRIP_ENABLE_MASK} +}; + +#define XEM_NUM_OPTIONS (sizeof(OptionsTable) / sizeof(OptionMap)) + +/*****************************************************************************/ +/** +* +* Set Ethernet driver/device options. The device must be stopped before +* calling this function. The options are contained within a bit-mask with each +* bit representing an option (i.e., you can OR the options together). A one (1) +* in the bit-mask turns an option on, and a zero (0) turns the option off. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param OptionsFlag is a bit-mask representing the Ethernet options to turn on +* or off. See xemac.h for a description of the available options. +* +* @return +* +* - XST_SUCCESS if the options were set successfully +* - XST_DEVICE_IS_STARTED if the device has not yet been stopped +* +* @note +* +* This function is not thread-safe and makes use of internal resources that are +* shared between the Start, Stop, and SetOptions functions, so if one task +* might be setting device options while another is trying to start the device, +* protection of this shared data (typically using a semaphore) is required. +* +******************************************************************************/ +XStatus +XEmac_SetOptions(XEmac * InstancePtr, u32 OptionsFlag) +{ + u32 ControlReg; + int Index; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STARTED; + } + + ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET); + + /* + * Loop through the options table, turning the option on or off + * depending on whether the bit is set in the incoming options flag. + */ + for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) { + if (OptionsFlag & OptionsTable[Index].Option) { + ControlReg |= OptionsTable[Index].Mask; /* turn it on */ + } else { + ControlReg &= ~OptionsTable[Index].Mask; /* turn it off */ + } + } + + /* + * TODO: need to validate addr-overwrite only if addr-insert? + */ + + /* + * Now write the control register. Leave it to the upper layers + * to restart the device. + */ + XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg); + + /* + * Check the polled option + */ + if (OptionsFlag & XEM_POLLED_OPTION) { + InstancePtr->IsPolled = TRUE; + } else { + InstancePtr->IsPolled = FALSE; + } + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Get Ethernet driver/device options. The 32-bit value returned is a bit-mask +* representing the options. A one (1) in the bit-mask means the option is on, +* and a zero (0) means the option is off. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* +* @return +* +* The 32-bit value of the Ethernet options. The value is a bit-mask +* representing all options that are currently enabled. See xemac.h for a +* description of the available options. +* +* @note +* +* None. +* +******************************************************************************/ +u32 +XEmac_GetOptions(XEmac * InstancePtr) +{ + u32 OptionsFlag = 0; + u32 ControlReg; + int Index; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Get the control register to determine which options are currently set. + */ + ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET); + + /* + * Loop through the options table to determine which options are set + */ + for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) { + if (ControlReg & OptionsTable[Index].Mask) { + OptionsFlag |= OptionsTable[Index].Option; + } + } + + if (InstancePtr->IsPolled) { + OptionsFlag |= XEM_POLLED_OPTION; + } + + return OptionsFlag; +} + +/*****************************************************************************/ +/** +* +* Set the Interframe Gap (IFG), which is the time the MAC delays between +* transmitting frames. There are two parts required. The total interframe gap +* is the total of the two parts. The values provided for the Part1 and Part2 +* parameters are multiplied by 4 to obtain the bit-time interval. The first +* part should be the first 2/3 of the total interframe gap. The MAC will reset +* the interframe gap timer if carrier sense becomes true during the period +* defined by interframe gap Part1. Part1 may be shorter than 2/3 the total and +* can be as small as zero. The second part should be the last 1/3 of the total +* interframe gap, but can be as large as the total interframe gap. The MAC +* will not reset the interframe gap timer if carrier sense becomes true during +* the period defined by interframe gap Part2. +* +* The device must be stopped before setting the interframe gap. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param Part1 is the interframe gap part 1 (which will be multiplied by 4 to +* get the bit-time interval). +* @param Part2 is the interframe gap part 2 (which will be multiplied by 4 to +* get the bit-time interval). +* +* @return +* +* - XST_SUCCESS if the interframe gap was set successfully +* - XST_DEVICE_IS_STARTED if the device has not been stopped +* +* @note +* +* None. +* +******************************************************************************/ +XStatus +XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2) +{ + u32 Ifg; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(Part1 < XEM_MAX_IFG); + XASSERT_NONVOID(Part2 < XEM_MAX_IFG); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Be sure device has been stopped + */ + if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STARTED; + } + + Ifg = Part1 << XEM_IFGP_PART1_SHIFT; + Ifg |= (Part2 << XEM_IFGP_PART2_SHIFT); + XIo_Out32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET, Ifg); + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Get the interframe gap, parts 1 and 2. See the description of interframe gap +* above in XEmac_SetInterframeGap(). +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param Part1Ptr is a pointer to an 8-bit buffer into which the interframe gap +* part 1 value will be copied. +* @param Part2Ptr is a pointer to an 8-bit buffer into which the interframe gap +* part 2 value will be copied. +* +* @return +* +* None. The values of the interframe gap parts are copied into the +* output parameters. +* +******************************************************************************/ +void +XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr) +{ + u32 Ifg; + + XASSERT_VOID(InstancePtr != NULL); + XASSERT_VOID(Part1Ptr != NULL); + XASSERT_VOID(Part2Ptr != NULL); + XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + Ifg = XIo_In32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET); + *Part1Ptr = (Ifg & XEM_IFGP_PART1_MASK) >> XEM_IFGP_PART1_SHIFT; + *Part2Ptr = (Ifg & XEM_IFGP_PART2_MASK) >> XEM_IFGP_PART2_SHIFT; +} diff --git a/board/xilinx/xilinx_enet/xemac_polled.c b/board/xilinx/xilinx_enet/xemac_polled.c new file mode 100644 index 00000000000..23768bca790 --- /dev/null +++ b/board/xilinx/xilinx_enet/xemac_polled.c @@ -0,0 +1,482 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xemac_polled.c +* +* Contains functions used when the driver is in polled mode. Use the +* XEmac_SetOptions() function to put the driver into polled mode. +* +*
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm  07/31/01 First release
+* 1.00b rpm  02/20/02 Repartitioned files and functions
+* 1.00c rpm  12/05/02 New version includes support for simple DMA
+* 
+* +******************************************************************************/ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xemac_i.h" +#include "xio.h" +#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */ + +/************************** Constant Definitions *****************************/ + +/**************************** Type Definitions *******************************/ + +/***************** Macros (Inline Functions) Definitions *********************/ + +/************************** Variable Definitions *****************************/ + +/************************** Function Prototypes ******************************/ + +/*****************************************************************************/ +/** +* +* Send an Ethernet frame in polled mode. The device/driver must be in polled +* mode before calling this function. The driver writes the frame directly to +* the MAC's packet FIFO, then enters a loop checking the device status for +* completion or error. Statistics are updated if an error occurs. The buffer +* to be sent must be word-aligned. +* +* It is assumed that the upper layer software supplies a correctly formatted +* Ethernet frame, including the destination and source addresses, the +* type/length field, and the data field. It is also assumed that upper layer +* software does not append FCS at the end of the frame. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param BufPtr is a pointer to a word-aligned buffer containing the Ethernet +* frame to be sent. +* @param ByteCount is the size of the Ethernet frame. +* +* @return +* +* - XST_SUCCESS if the frame was sent successfully +* - XST_DEVICE_IS_STOPPED if the device has not yet been started +* - XST_NOT_POLLED if the device is not in polled mode +* - XST_FIFO_NO_ROOM if there is no room in the EMAC's length FIFO for this frame +* - XST_FIFO_ERROR if the FIFO was overrun or underrun. This error is critical +* and requires the caller to reset the device. +* - XST_EMAC_COLLISION if the send failed due to excess deferral or late +* collision +* +* @note +* +* There is the possibility that this function will not return if the hardware +* is broken (i.e., it never sets the status bit indicating that transmission is +* done). If this is of concern to the user, the user should provide protection +* from this problem - perhaps by using a different timer thread to monitor the +* PollSend thread. On a 10Mbps MAC, it takes about 1.21 msecs to transmit a +* maximum size Ethernet frame (1518 bytes). On a 100Mbps MAC, it takes about +* 121 usecs to transmit a maximum size Ethernet frame. +* +* @internal +* +* The EMAC uses FIFOs behind its length and status registers. For this reason, +* it is important to keep the length, status, and data FIFOs in sync when +* reading or writing to them. +* +******************************************************************************/ +XStatus +XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount) +{ + u32 IntrStatus; + u32 XmitStatus; + XStatus Result; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BufPtr != NULL); + XASSERT_NONVOID(ByteCount > XEM_HDR_SIZE); /* send at least 1 byte */ + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Be sure the device is configured for polled mode and it is started + */ + if (!InstancePtr->IsPolled) { + return XST_NOT_POLLED; + } + + if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STOPPED; + } + + /* + * Check for overruns and underruns for the transmit status and length + * FIFOs and make sure the send packet FIFO is not deadlocked. Any of these + * conditions is bad enough that we do not want to continue. The upper layer + * software should reset the device to resolve the error. + */ + IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress); + + /* + * Overrun errors + */ + if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | + XEM_EIR_XMIT_LFIFO_OVER_MASK)) { + InstancePtr->Stats.XmitOverrunErrors++; + InstancePtr->Stats.FifoErrors++; + return XST_FIFO_ERROR; + } + + /* + * Underrun errors + */ + if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | + XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { + InstancePtr->Stats.XmitUnderrunErrors++; + InstancePtr->Stats.FifoErrors++; + return XST_FIFO_ERROR; + } + + if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) { + InstancePtr->Stats.FifoErrors++; + return XST_FIFO_ERROR; + } + + /* + * Before writing to the data FIFO, make sure the length FIFO is not + * full. The data FIFO might not be full yet even though the length FIFO + * is. This avoids an overrun condition on the length FIFO and keeps the + * FIFOs in sync. + */ + if (IntrStatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) { + /* + * Clear the latched LFIFO_FULL bit so next time around the most + * current status is represented + */ + XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, + XEM_EIR_XMIT_LFIFO_FULL_MASK); + return XST_FIFO_NO_ROOM; + } + + /* + * This is a non-blocking write. The packet FIFO returns an error if there + * is not enough room in the FIFO for this frame. + */ + Result = + XPacketFifoV100b_Write(&InstancePtr->SendFifo, BufPtr, ByteCount); + if (Result != XST_SUCCESS) { + return Result; + } + + /* + * Loop on the MAC's status to wait for any pause to complete. + */ + IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress); + + while ((IntrStatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) { + IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress); + /* + * Clear the pause status from the transmit status register + */ + XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, + IntrStatus & XEM_EIR_XMIT_PAUSE_MASK); + } + + /* + * Set the MAC's transmit packet length register to tell it to transmit + */ + XIo_Out32(InstancePtr->BaseAddress + XEM_TPLR_OFFSET, ByteCount); + + /* + * Loop on the MAC's status to wait for the transmit to complete. The + * transmit status is in the FIFO when the XMIT_DONE bit is set. + */ + do { + IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress); + } + while ((IntrStatus & XEM_EIR_XMIT_DONE_MASK) == 0); + + XmitStatus = XIo_In32(InstancePtr->BaseAddress + XEM_TSR_OFFSET); + + InstancePtr->Stats.XmitFrames++; + InstancePtr->Stats.XmitBytes += ByteCount; + + /* + * Check for various errors, bump statistics, and return an error status. + */ + + /* + * Overrun errors + */ + if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | + XEM_EIR_XMIT_LFIFO_OVER_MASK)) { + InstancePtr->Stats.XmitOverrunErrors++; + InstancePtr->Stats.FifoErrors++; + return XST_FIFO_ERROR; + } + + /* + * Underrun errors + */ + if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | + XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { + InstancePtr->Stats.XmitUnderrunErrors++; + InstancePtr->Stats.FifoErrors++; + return XST_FIFO_ERROR; + } + + /* + * Clear the interrupt status register of transmit statuses + */ + XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, + IntrStatus & XEM_EIR_XMIT_ALL_MASK); + + /* + * Collision errors are stored in the transmit status register + * instead of the interrupt status register + */ + if (XmitStatus & XEM_TSR_EXCESS_DEFERRAL_MASK) { + InstancePtr->Stats.XmitExcessDeferral++; + return XST_EMAC_COLLISION_ERROR; + } + + if (XmitStatus & XEM_TSR_LATE_COLLISION_MASK) { + InstancePtr->Stats.XmitLateCollisionErrors++; + return XST_EMAC_COLLISION_ERROR; + } + + return XST_SUCCESS; +} + +/*****************************************************************************/ +/** +* +* Receive an Ethernet frame in polled mode. The device/driver must be in polled +* mode before calling this function. The driver receives the frame directly +* from the MAC's packet FIFO. This is a non-blocking receive, in that if there +* is no frame ready to be received at the device, the function returns with an +* error. The MAC's error status is not checked, so statistics are not updated +* for polled receive. The buffer into which the frame will be received must be +* word-aligned. +* +* @param InstancePtr is a pointer to the XEmac instance to be worked on. +* @param BufPtr is a pointer to a word-aligned buffer into which the received +* Ethernet frame will be copied. +* @param ByteCountPtr is both an input and an output parameter. It is a pointer +* to a 32-bit word that contains the size of the buffer on entry into the +* function and the size the received frame on return from the function. +* +* @return +* +* - XST_SUCCESS if the frame was sent successfully +* - XST_DEVICE_IS_STOPPED if the device has not yet been started +* - XST_NOT_POLLED if the device is not in polled mode +* - XST_NO_DATA if there is no frame to be received from the FIFO +* - XST_BUFFER_TOO_SMALL if the buffer to receive the frame is too small for +* the frame waiting in the FIFO. +* +* @note +* +* Input buffer must be big enough to hold the largest Ethernet frame. Buffer +* must also be 32-bit aligned. +* +* @internal +* +* The EMAC uses FIFOs behind its length and status registers. For this reason, +* it is important to keep the length, status, and data FIFOs in sync when +* reading or writing to them. +* +******************************************************************************/ +XStatus +XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr) +{ + XStatus Result; + u32 PktLength; + u32 IntrStatus; + + XASSERT_NONVOID(InstancePtr != NULL); + XASSERT_NONVOID(BufPtr != NULL); + XASSERT_NONVOID(ByteCountPtr != NULL); + XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); + + /* + * Be sure the device is configured for polled mode and it is started + */ + if (!InstancePtr->IsPolled) { + return XST_NOT_POLLED; + } + + if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) { + return XST_DEVICE_IS_STOPPED; + } + + /* + * Make sure the buffer is big enough to hold the maximum frame size. + * We need to do this because as soon as we read the MAC's packet length + * register, which is actually a FIFO, we remove that length from the + * FIFO. We do not want to read the length FIFO without also reading the + * data FIFO since this would get the FIFOs out of sync. So we have to + * make this restriction. + */ + if (*ByteCountPtr < XEM_MAX_FRAME_SIZE) { + return XST_BUFFER_TOO_SMALL; + } + + /* + * First check for packet FIFO deadlock and return an error if it has + * occurred. A reset by the caller is necessary to correct this problem. + */ + if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) { + InstancePtr->Stats.FifoErrors++; + return XST_FIFO_ERROR; + } + + /* + * Get the interrupt status to know what happened (whether an error occurred + * and/or whether frames have been received successfully). When clearing the + * intr status register, clear only statuses that pertain to receive. + */ + IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress); + XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, + IntrStatus & XEM_EIR_RECV_ALL_MASK); + + /* + * Check receive errors and bump statistics so the caller will have a clue + * as to why data may not have been received. We continue on if an error + * occurred since there still may be frames that were received successfully. + */ + if (IntrStatus & (XEM_EIR_RECV_LFIFO_OVER_MASK | + XEM_EIR_RECV_DFIFO_OVER_MASK)) { + InstancePtr->Stats.RecvOverrunErrors++; + InstancePtr->Stats.FifoErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) { + InstancePtr->Stats.RecvUnderrunErrors++; + InstancePtr->Stats.FifoErrors++; + } + + /* + * General receive errors + */ + if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) { + if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) { + InstancePtr->Stats.RecvMissedFrameErrors = + XIo_In32(InstancePtr->BaseAddress + + XEM_RMFC_OFFSET); + } + + if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) { + InstancePtr->Stats.RecvCollisionErrors = + XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET); + } + + if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) { + InstancePtr->Stats.RecvFcsErrors = + XIo_In32(InstancePtr->BaseAddress + + XEM_RFCSEC_OFFSET); + } + + if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) { + InstancePtr->Stats.RecvLengthFieldErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) { + InstancePtr->Stats.RecvShortErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) { + InstancePtr->Stats.RecvLongErrors++; + } + + if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) { + InstancePtr->Stats.RecvAlignmentErrors = + XIo_In32(InstancePtr->BaseAddress + + XEM_RAEC_OFFSET); + } + } + + /* + * Before reading from the length FIFO, make sure the length FIFO is not + * empty. We could cause an underrun error if we try to read from an + * empty FIFO. + */ + if ((IntrStatus & XEM_EIR_RECV_DONE_MASK) == 0) { + return XST_NO_DATA; + } + + /* + * Determine, from the MAC, the length of the next packet available + * in the data FIFO (there should be a non-zero length here) + */ + PktLength = XIo_In32(InstancePtr->BaseAddress + XEM_RPLR_OFFSET); + if (PktLength == 0) { + return XST_NO_DATA; + } + + /* + * Write the RECV_DONE bit in the status register to clear it. This bit + * indicates the RPLR is non-empty, and we know it's set at this point. + * We clear it so that subsequent entry into this routine will reflect the + * current status. This is done because the non-empty bit is latched in the + * IPIF, which means it may indicate a non-empty condition even though + * there is something in the FIFO. + */ + XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, XEM_EIR_RECV_DONE_MASK); + + /* + * We assume that the MAC never has a length bigger than the largest + * Ethernet frame, so no need to make another check here. + */ + + /* + * This is a non-blocking read. The FIFO returns an error if there is + * not at least the requested amount of data in the FIFO. + */ + Result = + XPacketFifoV100b_Read(&InstancePtr->RecvFifo, BufPtr, PktLength); + if (Result != XST_SUCCESS) { + return Result; + } + + InstancePtr->Stats.RecvFrames++; + InstancePtr->Stats.RecvBytes += PktLength; + + *ByteCountPtr = PktLength; + + return XST_SUCCESS; +} -- cgit v1.2.3