From 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 7 May 2007 17:11:09 +0200 Subject: new: add writing to msr register --- board/xilinx/ml401/xparameters.h | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) mode change 100644 => 100755 board/xilinx/ml401/xparameters.h (limited to 'board/xilinx') diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/ml401/xparameters.h old mode 100644 new mode 100755 index f63ffed3dc..2b0c045b9f --- a/board/xilinx/ml401/xparameters.h +++ b/board/xilinx/ml401/xparameters.h @@ -21,50 +21,54 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * - * * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 6.3 EDK_Gmm.12.3 + * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 */ /* System Clock Frequency */ #define XILINX_CLOCK_FREQ 100000000 /* Microblaze is microblaze_0 */ -#define XILINX_FSL_NUMBER 2 +#define XILINX_FSL_NUMBER 3 -/* Interrupt controller is intc_0 */ +/* Interrupt controller is opb_intc_0 */ #define XILINX_INTC_BASEADDR 0x41200000 -#define XILINX_INTC_NUM_INTR_INPUTS 4 +#define XILINX_INTC_NUM_INTR_INPUTS 5 -/* Timer pheriphery is opb_timer_0 */ +/* Timer pheriphery is opb_timer_1 */ #define XILINX_TIMER_BASEADDR 0x41c00000 #define XILINX_TIMER_IRQ 0 -/* Uart pheriphery is console_uart */ +/* Uart pheriphery is RS232_Uart */ #define XILINX_UART_BASEADDR 0x40600000 #define XILINX_UART_BAUDRATE 115200 -/* GPIO is opb_gpio_0*/ -#define XILINX_GPIO_BASEADDR 0x90000000 +/* IIC pheriphery is IIC_EEPROM */ +#define XILINX_IIC_0_BASEADDR 0x40800000 +#define XILINX_IIC_0_FREQ 100000 +#define XILINX_IIC_0_BIT 0 + +/* GPIO is LEDs_4Bit*/ +#define XILINX_GPIO_BASEADDR 0x40000000 -/* Flash Memory is opb_emc_0 */ +/* Flash Memory is FLASH_2Mx32 */ #define XILINX_FLASH_START 0x2c000000 #define XILINX_FLASH_SIZE 0x00800000 -/* Main Memory is plb_ddr_0 */ +/* Main Memory is DDR_SDRAM_64Mx32 */ #define XILINX_RAM_START 0x28000000 #define XILINX_RAM_SIZE 0x04000000 -/* Sysace Controller is opb_sysace_0 */ +/* Sysace Controller is SysACE_CompactFlash */ #define XILINX_SYSACE_BASEADDR 0x41800000 -#define XILINX_SYSACE_HIGHADDR 0x4180FFFF +#define XILINX_SYSACE_HIGHADDR 0x4180ffff #define XILINX_SYSACE_MEM_WIDTH 16 -/* Ethernet controller is opb_ethernet_0 */ +/* Ethernet controller is Ethernet_MAC */ #define XPAR_XEMAC_NUM_INSTANCES 1 #define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 #define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000 -#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0fFFF +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff #define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 #define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 #define XPAR_OPB_ETHERNET_0_MII_EXIST 1 -- cgit v1.2.3