From 64c7abf0235a3cb5efc32b6c926b6ff8cc0d1d9b Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 3 Jan 2018 09:19:17 -0500 Subject: toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL The code for programming the OTP fuses on the PMIC PF0100 can only be used in full U-Boot, so do not build / link it into SPL. Cc: Max Krummenacher Cc: Stefano Babic Cc: Fabio Estevam Signed-off-by: Tom Rini Reviewed-by: Fabio Estevam Tested-by: Max Krummenacher --- board/toradex/colibri_imx6/pf0100.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'board/toradex/colibri_imx6/pf0100.c') diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c index 6889287760..62e64ab1d7 100644 --- a/board/toradex/colibri_imx6/pf0100.c +++ b/board/toradex/colibri_imx6/pf0100.c @@ -23,7 +23,7 @@ /*#define DEBUG */ /* use GPIO: EXT_IO1 to switch on VPGM, ON: 1 */ -static iomux_v3_cfg_t const pmic_prog_pads[] = { +static __maybe_unused iomux_v3_cfg_t const pmic_prog_pads[] = { MX6_PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL), # define PMIC_PROG_VOLTAGE IMX_GPIO_NR(2, 3) }; @@ -144,7 +144,8 @@ unsigned pmic_init(void) return programmed; } -int pf0100_prog(void) +#ifndef CONFIG_SPL_BUILD +static int pf0100_prog(void) { unsigned char bus = 1; unsigned char val; @@ -191,7 +192,7 @@ int pf0100_prog(void) return CMD_RET_SUCCESS; } -int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc, +static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int ret; @@ -209,3 +210,4 @@ U_BOOT_CMD( "Program the OTP fuses on the PMIC PF0100", "" ); +#endif -- cgit v1.2.3