From 7d0299cd8f11f33910f15531913ff2e3d1621bda Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 17 Apr 2018 14:13:11 +0200 Subject: ARM: rmobile: Update M2 Koelsch The M2 Koelsch port was broken since some time. This patch updates the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- board/renesas/koelsch/koelsch_spl.c | 410 ++++++++++++++++++++++++++++++++++++ 1 file changed, 410 insertions(+) create mode 100644 board/renesas/koelsch/koelsch_spl.c (limited to 'board/renesas/koelsch/koelsch_spl.c') diff --git a/board/renesas/koelsch/koelsch_spl.c b/board/renesas/koelsch/koelsch_spl.c new file mode 100644 index 00000000000..de6c1c05673 --- /dev/null +++ b/board/renesas/koelsch/koelsch_spl.c @@ -0,0 +1,410 @@ +/* + * board/renesas/koelsch/koelsch_spl.c + * + * Copyright (C) 2018 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define TMU0_MSTP125 BIT(25) +#define SCIF0_MSTP721 BIT(21) +#define QSPI_MSTP917 BIT(17) + +#define SD2CKCR 0xE615026C +#define SD_97500KHZ 0x7 + +struct reg_config { + u16 off; + u32 val; +}; + +static void dbsc_wait(u16 reg) +{ + static const u32 dbsc3_0_base = DBSC3_0_BASE; + static const u32 dbsc3_1_base = DBSC3_0_BASE + 0x10000; + + while (!(readl(dbsc3_0_base + reg) & BIT(0))) + ; + + while (!(readl(dbsc3_1_base + reg) & BIT(0))) + ; +} + +static void spl_init_sys(void) +{ + u32 r0 = 0; + + writel(0xa5a5a500, 0xe6020004); + writel(0xa5a5a500, 0xe6030004); + + asm volatile( + /* ICIALLU - Invalidate I$ to PoU */ + "mcr 15, 0, %0, cr7, cr5, 0 \n" + /* BPIALL - Invalidate branch predictors */ + "mcr 15, 0, %0, cr7, cr5, 6 \n" + /* Set SCTLR[IZ] */ + "mrc 15, 0, %0, cr1, cr0, 0 \n" + "orr %0, #0x1800 \n" + "mcr 15, 0, %0, cr1, cr0, 0 \n" + "isb sy \n" + :"=r"(r0)); +} + +static void spl_init_pfc(void) +{ + static const struct reg_config pfc_with_unlock[] = { + { 0x0090, 0x60000000 }, + { 0x0094, 0x60000000 }, + { 0x0098, 0x00800200 }, + { 0x009c, 0x00000000 }, + { 0x0020, 0x00000000 }, + { 0x0024, 0x00000000 }, + { 0x0028, 0x000244c8 }, + { 0x002c, 0x00000000 }, + { 0x0030, 0x00002400 }, + { 0x0034, 0x01520000 }, + { 0x0038, 0x00724003 }, + { 0x003c, 0x00000000 }, + { 0x0040, 0x00000000 }, + { 0x0044, 0x00000000 }, + { 0x0048, 0x00000000 }, + { 0x004c, 0x00000000 }, + { 0x0050, 0x00000000 }, + { 0x0054, 0x00000000 }, + { 0x0058, 0x00000000 }, + { 0x005c, 0x00000000 }, + { 0x0160, 0x00000000 }, + { 0x0004, 0xffffffff }, + { 0x0008, 0x00ec3fff }, + { 0x000c, 0x3bc001e7 }, + { 0x0010, 0x5bffffff }, + { 0x0014, 0x1ffffffb }, + { 0x0018, 0x01bffff0 }, + { 0x001c, 0xcf7fffff }, + { 0x0074, 0x0381fc00 }, + }; + + static const struct reg_config pfc_without_unlock[] = { + { 0x0100, 0xffffffdf }, + { 0x0104, 0xc883c3ff }, + { 0x0108, 0x1201f3c9 }, + { 0x010c, 0x00000000 }, + { 0x0110, 0xffffeb04 }, + { 0x0114, 0xc003ffff }, + { 0x0118, 0x0800000f }, + { 0x011c, 0x001800f0 }, + }; + + static const u32 pfc_base = 0xe6060000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) { + writel(~pfc_with_unlock[i].val, pfc_base); + writel(pfc_with_unlock[i].val, + pfc_base | pfc_with_unlock[i].off); + } + + for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++) + writel(pfc_without_unlock[i].val, + pfc_base | pfc_without_unlock[i].off); +} + +static void spl_init_gpio(void) +{ + static const u16 gpio_offs[] = { + 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x5400, 0x5800 + }; + + static const struct reg_config gpio_set[] = { + { 0x2000, 0x04381000 }, + { 0x5000, 0x00000000 }, + { 0x5800, 0x000e0000 }, + + }; + + static const struct reg_config gpio_clr[] = { + { 0x1000, 0x00000000 }, + { 0x2000, 0x04381010 }, + { 0x3000, 0x00000000 }, + { 0x4000, 0x00000000 }, + { 0x5000, 0x00400000 }, + { 0x5400, 0x00000000 }, + { 0x5800, 0x000e0380 }, + }; + + static const u32 gpio_base = 0xe6050000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x20 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x00 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_set); i++) + writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off); + + for (i = 0; i < ARRAY_SIZE(gpio_clr); i++) + writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); +} + +static void spl_init_lbsc(void) +{ + static const struct reg_config lbsc_config[] = { + { 0x00, 0x00000020 }, + { 0x08, 0x00002020 }, + { 0x30, 0x2a103320 }, + { 0x38, 0xff70ff70 }, + }; + + static const u16 lbsc_offs[] = { + 0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8, 0x180 + }; + + static const u32 lbsc_base = 0xfec00200; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) { + writel(lbsc_config[i].val, + lbsc_base | lbsc_config[i].off); + writel(lbsc_config[i].val, + lbsc_base | (lbsc_config[i].off + 4)); + } + + for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++) + writel(0, lbsc_base | lbsc_offs[i]); +} + +static void spl_init_dbsc(void) +{ + static const struct reg_config dbsc_config1[] = { + { 0x0018, 0x21000000 }, + { 0x0018, 0x11000000 }, + { 0x0018, 0x10000000 }, + { 0x0280, 0x0000a55a }, + { 0x0290, 0x00000010 }, + { 0x02a0, 0xf004649b }, + { 0x0020, 0x00000007 }, + { 0x0024, 0x0f030a02 }, + { 0x0030, 0x00000001 }, + { 0x00b0, 0x00000000 }, + { 0x0040, 0x0000000b }, + { 0x0044, 0x00000008 }, + { 0x0048, 0x00000000 }, + { 0x0050, 0x0000000b }, + { 0x0054, 0x000c000b }, + { 0x0058, 0x00000027 }, + { 0x005c, 0x0000001c }, + { 0x0060, 0x00000006 }, + { 0x0064, 0x00000020 }, + { 0x0068, 0x00000008 }, + { 0x006c, 0x0000000c }, + { 0x0070, 0x00000009 }, + { 0x0074, 0x00000012 }, + { 0x0078, 0x000000d0 }, + { 0x007c, 0x00140005 }, + { 0x0080, 0x00050004 }, + { 0x0084, 0x70233005 }, + { 0x0088, 0x000c0000 }, + { 0x008c, 0x00000300 }, + { 0x0090, 0x00000040 }, + { 0x0100, 0x00000001 }, + { 0x00c0, 0x00020001 }, + { 0x00c8, 0x20082008 }, + { 0x0380, 0x00020002 }, + { 0x0390, 0x0000001f }, + }; + + static const struct reg_config dbsc_config5[] = { + { 0x0244, 0x00000011 }, + { 0x0290, 0x00000006 }, + { 0x02a0, 0x0005c000 }, + { 0x0290, 0x00000003 }, + { 0x02a0, 0x0300c481 }, + { 0x0290, 0x00000023 }, + { 0x02a0, 0x00fdb6c0 }, + { 0x0290, 0x00000011 }, + { 0x02a0, 0x1000040b }, + { 0x0290, 0x00000012 }, + { 0x02a0, 0x9d9cbb66 }, + { 0x0290, 0x00000013 }, + { 0x02a0, 0x1a868400 }, + { 0x0290, 0x00000014 }, + { 0x02a0, 0x300214d8 }, + { 0x0290, 0x00000015 }, + { 0x02a0, 0x00000d70 }, + { 0x0290, 0x00000016 }, + { 0x02a0, 0x00000006 }, + { 0x0290, 0x00000017 }, + { 0x02a0, 0x00000018 }, + { 0x0290, 0x0000001a }, + { 0x02a0, 0x910035c7 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config6[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x00000181 }, + { 0x0018, 0x11000000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config7[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x0000fe01 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config8[] = { + { 0x0304, 0x00000000 }, + { 0x00f4, 0x01004c20 }, + { 0x00f8, 0x014000aa }, + { 0x00e0, 0x00000140 }, + { 0x00e4, 0x00081860 }, + { 0x00e8, 0x00010000 }, + { 0x0014, 0x00000001 }, + { 0x0010, 0x00000001 }, + { 0x0280, 0x00000000 }, + }; + + static const u32 dbsc3_0_base = DBSC3_0_BASE; + static const u32 dbsc3_1_base = DBSC3_0_BASE + 0x10000; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++) { + writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off); + writel(dbsc_config1[i].val, dbsc3_1_base | dbsc_config1[i].off); + } + + dbsc_wait(0x240); + + for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++) { + writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off); + writel(dbsc_config5[i].val, dbsc3_1_base | dbsc_config5[i].off); + } + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++) { + writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off); + writel(dbsc_config6[i].val, dbsc3_1_base | dbsc_config6[i].off); + } + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++) { + writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off); + writel(dbsc_config7[i].val, dbsc3_1_base | dbsc_config7[i].off); + } + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++) { + writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off); + writel(dbsc_config8[i].val, dbsc3_1_base | dbsc_config8[i].off); + } + +} + +static void spl_init_qspi(void) +{ + mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); + + static const u32 qspi_base = 0xe6b10000; + + writeb(0x08, qspi_base + 0x00); + writeb(0x00, qspi_base + 0x01); + writeb(0x06, qspi_base + 0x02); + writeb(0x01, qspi_base + 0x0a); + writeb(0x00, qspi_base + 0x0b); + writeb(0x00, qspi_base + 0x0c); + writeb(0x00, qspi_base + 0x0d); + writeb(0x00, qspi_base + 0x0e); + + writew(0xe080, qspi_base + 0x10); + + writeb(0xc0, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x08); + writeb(0x48, qspi_base + 0x00); +} + +void board_init_f(ulong dummy) +{ + int i; + + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); + + /* + * SD0 clock is set to 97.5MHz by default. + * Set SD2 to the 97.5MHz as well. + */ + writel(SD_97500KHZ, SD2CKCR); + + spl_init_sys(); + spl_init_pfc(); + spl_init_gpio(); + spl_init_lbsc(); + + /* Unknown, likely ES1.0-specific delay */ + for (i = 0; i < 100000; i++) + asm volatile("nop"); + + spl_init_dbsc(); + spl_init_qspi(); +} + +void spl_board_init(void) +{ + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); +} + +void board_boot_order(u32 *spl_boot_list) +{ + const u32 jtag_magic = 0x1337c0de; + const u32 load_magic = 0xb33fc0de; + + /* + * If JTAG probe sets special word at 0xe6300020, then it must + * put U-Boot into RAM and SPL will start it from RAM. + */ + if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { + printf("JTAG boot detected!\n"); + + while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) + ; + + spl_boot_list[0] = BOOT_DEVICE_RAM; + spl_boot_list[1] = BOOT_DEVICE_NONE; + + return; + } + + /* Boot from SPI NOR with YMODEM UART fallback. */ + spl_boot_list[0] = BOOT_DEVICE_SPI; + spl_boot_list[1] = BOOT_DEVICE_UART; + spl_boot_list[2] = BOOT_DEVICE_NONE; +} + +void reset_cpu(ulong addr) +{ +} -- cgit v1.2.3