From 3f397782ae6c6148f7fa12bbb62f309a4f5d897c Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 29 Jan 2013 16:37:37 +0000 Subject: ARM: rpi_b: use bcm2835 mbox driver to get memory size The firmware running on the bcm2835 SoC's VideoCore CPU determines how much of the system RAM is available for use by the ARM CPU. Previously, U-Boot assumed that only 128MB was available, since this was the smallest value configured by any public firmware. However, we can now query the actual value at run-time from the firmware using the mbox property protocol. Signed-off-by: Stephen Warren --- board/raspberrypi/rpi_b/rpi_b.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'board/raspberrypi/rpi_b/rpi_b.c') diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c index 688b0aade1..3c654a1ac1 100644 --- a/board/raspberrypi/rpi_b/rpi_b.c +++ b/board/raspberrypi/rpi_b/rpi_b.c @@ -15,13 +15,32 @@ */ #include +#include #include DECLARE_GLOBAL_DATA_PTR; +struct msg_get_arm_mem { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_get_arm_mem get_arm_mem; + u32 end_tag; +}; + int dram_init(void) { - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16); + int ret; + + BCM2835_MBOX_INIT_HDR(msg); + BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY); + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr); + if (ret) { + printf("bcm2835: Could not query ARM memory size\n"); + return -1; + } + + gd->ram_size = msg->get_arm_mem.body.resp.mem_size; return 0; } -- cgit v1.2.3