From 33846df28fa1f4cf96a96c18142d48d813caa892 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Wed, 11 Feb 2009 18:38:23 +0100 Subject: Add wait flags to support board/chip specific delays The NAND flash on the TQM8548_BE modules requires a short delay after running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE requires a further short delay after writing out a buffer. Normally the R/B pin should be checked, but it's not connected on the TQM8548_BE. The corresponding Linux FSL UPM driver uses similar delay points at the same locations. To manage these extra delays in a more general way, I introduced the "wait_flags" field allowing the board-specific driver to specify various types of extra delay. Signed-off-by: Wolfgang Grandegger Signed-off-by: Scott Wood --- board/freescale/mpc8360erdk/nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board/freescale') diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c index aa43350f2d..9ffffb436c 100644 --- a/board/freescale/mpc8360erdk/nand.c +++ b/board/freescale/mpc8360erdk/nand.c @@ -76,7 +76,7 @@ static struct fsl_upm_nand fun = { .upm_cmd_offset = 8, .upm_addr_offset = 16, .dev_ready = dev_ready, - .wait_pattern = 1, + .wait_flags = FSL_UPM_WAIT_RUN_PATTERN, .chip_delay = 50, }; -- cgit v1.2.3