From 71a988aa630f013b8425789351971dc4e202593d Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Fri, 18 Jan 2013 16:14:24 +0000 Subject: imximage.cfg: run files through C preprocessor The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky --- board/freescale/mx25pdk/imximage.cfg | 77 +++++++++++++++++++----------------- 1 file changed, 40 insertions(+), 37 deletions(-) (limited to 'board/freescale/mx25pdk/imximage.cfg') diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg index f7af7ff1d0e..c42a2836f7e 100644 --- a/board/freescale/mx25pdk/imximage.cfg +++ b/board/freescale/mx25pdk/imximage.cfg @@ -1,46 +1,49 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# EIM config-CS5 init -- CPLD +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* EIM config-CS5 init -- CPLD */ DATA 4 0xB8002050 0x0000D843 DATA 4 0xB8002054 0x22252521 DATA 4 0xB8002058 0x22220A00 -# DDR2 init +/* DDR2 init */ DATA 4 0xB8001004 0x0076E83A DATA 4 0xB8001010 0x00000204 DATA 4 0xB8001000 0x92210000 @@ -67,7 +70,7 @@ DATA 4 0x43FAC454 0x00001000 DATA 4 0x53F80008 0x20034000 -# Enable the clocks +/* Enable the clocks */ DATA 4 0x53f8000c 0x1fffffff DATA 4 0x53f80010 0xffffffff DATA 4 0x53f80014 0xfdfff -- cgit v1.2.3