From 25eedb2c1958a13110c7de1fc809b624053cc69c Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 19 Mar 2008 15:02:07 -0500 Subject: FSL: Clean up board/freescale/common/Makefile Each file that can be built here now follows some CONFIG_ option so that they are appropriately built or not, as needed. And CONFIG_ defines were added to various board config files to make sure that happens. The other board/freescale/*/Makefiles no longer need to reach up and over into ../common to build their individually needed files any more. Boards that are CDS specific were renamed with cds_ prefix. Signed-off-by: Jon Loeliger --- board/freescale/common/Makefile | 12 +++- board/freescale/common/cds_eeprom.c | 60 ++++++++++++++++++++ board/freescale/common/cds_pci_ft.c | 72 ++++++++++++++++++++++++ board/freescale/common/cds_via.c | 109 ++++++++++++++++++++++++++++++++++++ board/freescale/common/eeprom.c | 60 -------------------- board/freescale/common/ft_board.c | 72 ------------------------ board/freescale/common/via.c | 109 ------------------------------------ 7 files changed, 251 insertions(+), 243 deletions(-) create mode 100644 board/freescale/common/cds_eeprom.c create mode 100644 board/freescale/common/cds_pci_ft.c create mode 100644 board/freescale/common/cds_via.c delete mode 100644 board/freescale/common/eeprom.c delete mode 100644 board/freescale/common/ft_board.c delete mode 100644 board/freescale/common/via.c (limited to 'board/freescale/common') diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 6665e7f7cae..6340b418ea1 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -29,10 +29,18 @@ endif LIB = $(obj)lib$(VENDOR).a -COBJS-${CONFIG_PQ_MDS_PIB} += pq-mds-pib.o -COBJS-${CONFIG_ID_EEPROM} += sys_eeprom.o +COBJS-${CONFIG_FSL_CADMUS} += cadmus.o +COBJS-${CONFIG_FSL_CDS_EEPROM} += cds_eeprom.o +COBJS-${CONFIG_FSL_VIA} += cds_via.o COBJS-${CONFIG_FSL_DIU_FB} += fsl_diu_fb.o fsl_logo_bmp.o COBJS-${CONFIG_FSL_PIXIS} += pixis.o +COBJS-${CONFIG_PQ_MDS_PIB} += pq-mds-pib.o +COBJS-${CONFIG_ID_EEPROM} += sys_eeprom.o + +COBJS-${CONFIG_MPC8541CDS} += cds_pci_ft.o +COBJS-${CONFIG_MPC8548CDS} += cds_pci_ft.o +COBJS-${CONFIG_MPC8555CDS} += cds_pci_ft.o + SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/common/cds_eeprom.c b/board/freescale/common/cds_eeprom.c new file mode 100644 index 00000000000..5034e0ca2e1 --- /dev/null +++ b/board/freescale/common/cds_eeprom.c @@ -0,0 +1,60 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + +#include "eeprom.h" + + +typedef struct { + char idee_pcbid[4]; /* "CCID" for CDC v1.X */ + u8 idee_major; + u8 idee_minor; + char idee_serial[10]; + char idee_errata[2]; + char idee_date[8]; /* yyyymmdd */ + /* The rest of the EEPROM space is reserved */ +} id_eeprom_t; + + +unsigned int +get_cpu_board_revision(void) +{ + uint major = 0; + uint minor = 0; + + id_eeprom_t id_eeprom; + + i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, + (uchar *) &id_eeprom, sizeof(id_eeprom)); + + major = id_eeprom.idee_major; + minor = id_eeprom.idee_minor; + + if (major == 0xff && minor == 0xff) { + major = minor = 0; + } + + return MPC85XX_CPU_BOARD_REV(major,minor); +} diff --git a/board/freescale/common/cds_pci_ft.c b/board/freescale/common/cds_pci_ft.c new file mode 100644 index 00000000000..6f221aff26f --- /dev/null +++ b/board/freescale/common/cds_pci_ft.c @@ -0,0 +1,72 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include "cadmus.h" + +#if defined(CONFIG_OF_BOARD_SETUP) +static void cds_pci_fixup(void *blob) +{ + int node, tmp[2]; + const char *path; + int len, slot, i; + u32 *map = NULL; + + node = fdt_path_offset(blob, "/aliases"); + tmp[0] = 0; + if (node >= 0) { + path = fdt_getprop(blob, node, "pci0", NULL); + if (path) { + node = fdt_path_offset(blob, path); + if (node >= 0) { + map = fdt_getprop_w(blob, node, "interrupt-map", &len); + } + } + } + + if (map) { + len /= sizeof(u32); + + slot = get_pci_slot(); + + for (i=0;i +#include + +/* Config the VIA chip */ +void mpc85xx_config_via(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *tab) +{ + pci_dev_t bridge; + unsigned int cmdstat; + + /* Enable USB and IDE functions */ + pci_hose_write_config_byte(hose, dev, 0x48, 0x08); + + pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); + cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY| PCI_COMMAND_MASTER; + pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + + /* + * Force the backplane P2P bridge to have a window + * open from 0x00000000-0x00001fff in PCI I/O space. + * This allows legacy I/O (i8259, etc) on the VIA + * southbridge to be accessed. + */ + bridge = PCI_BDF(0,BRIDGE_ID,0); + pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0); + pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0); + pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10); + pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0); +} + +/* Function 1, IDE */ +void mpc85xx_config_via_usbide(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *tab) +{ + pciauto_config_device(hose, dev); + /* + * Since the P2P window was forced to cover the fixed + * legacy I/O addresses, it is necessary to manually + * place the base addresses for the IDE and USB functions + * within this window. + */ + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8); + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4); + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8); + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4); + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0); +} + +/* Function 2, USB ports 0-1 */ +void mpc85xx_config_via_usb(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *tab) +{ + pciauto_config_device(hose, dev); + + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0); +} + +/* Function 3, USB ports 2-3 */ +void mpc85xx_config_via_usb2(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *tab) +{ + pciauto_config_device(hose, dev); + + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80); +} + +/* Function 5, Power Management */ +void mpc85xx_config_via_power(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *tab) +{ + pciauto_config_device(hose, dev); + + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00); + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc); + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8); +} + +/* Function 6, AC97 Interface */ +void mpc85xx_config_via_ac97(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *tab) +{ + pciauto_config_device(hose, dev); + + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00); +} diff --git a/board/freescale/common/eeprom.c b/board/freescale/common/eeprom.c deleted file mode 100644 index 5034e0ca2e1..00000000000 --- a/board/freescale/common/eeprom.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - -#include "eeprom.h" - - -typedef struct { - char idee_pcbid[4]; /* "CCID" for CDC v1.X */ - u8 idee_major; - u8 idee_minor; - char idee_serial[10]; - char idee_errata[2]; - char idee_date[8]; /* yyyymmdd */ - /* The rest of the EEPROM space is reserved */ -} id_eeprom_t; - - -unsigned int -get_cpu_board_revision(void) -{ - uint major = 0; - uint minor = 0; - - id_eeprom_t id_eeprom; - - i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, - (uchar *) &id_eeprom, sizeof(id_eeprom)); - - major = id_eeprom.idee_major; - minor = id_eeprom.idee_minor; - - if (major == 0xff && minor == 0xff) { - major = minor = 0; - } - - return MPC85XX_CPU_BOARD_REV(major,minor); -} diff --git a/board/freescale/common/ft_board.c b/board/freescale/common/ft_board.c deleted file mode 100644 index 6f221aff26f..00000000000 --- a/board/freescale/common/ft_board.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include "cadmus.h" - -#if defined(CONFIG_OF_BOARD_SETUP) -static void cds_pci_fixup(void *blob) -{ - int node, tmp[2]; - const char *path; - int len, slot, i; - u32 *map = NULL; - - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - node = fdt_path_offset(blob, path); - if (node >= 0) { - map = fdt_getprop_w(blob, node, "interrupt-map", &len); - } - } - } - - if (map) { - len /= sizeof(u32); - - slot = get_pci_slot(); - - for (i=0;i -#include - -/* Config the VIA chip */ -void mpc85xx_config_via(struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *tab) -{ - pci_dev_t bridge; - unsigned int cmdstat; - - /* Enable USB and IDE functions */ - pci_hose_write_config_byte(hose, dev, 0x48, 0x08); - - pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); - cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY| PCI_COMMAND_MASTER; - pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - - /* - * Force the backplane P2P bridge to have a window - * open from 0x00000000-0x00001fff in PCI I/O space. - * This allows legacy I/O (i8259, etc) on the VIA - * southbridge to be accessed. - */ - bridge = PCI_BDF(0,BRIDGE_ID,0); - pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0); - pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0); - pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10); - pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0); -} - -/* Function 1, IDE */ -void mpc85xx_config_via_usbide(struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *tab) -{ - pciauto_config_device(hose, dev); - /* - * Since the P2P window was forced to cover the fixed - * legacy I/O addresses, it is necessary to manually - * place the base addresses for the IDE and USB functions - * within this window. - */ - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8); - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4); - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8); - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4); - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0); -} - -/* Function 2, USB ports 0-1 */ -void mpc85xx_config_via_usb(struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *tab) -{ - pciauto_config_device(hose, dev); - - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0); -} - -/* Function 3, USB ports 2-3 */ -void mpc85xx_config_via_usb2(struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *tab) -{ - pciauto_config_device(hose, dev); - - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80); -} - -/* Function 5, Power Management */ -void mpc85xx_config_via_power(struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *tab) -{ - pciauto_config_device(hose, dev); - - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00); - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc); - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8); -} - -/* Function 6, AC97 Interface */ -void mpc85xx_config_via_ac97(struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *tab) -{ - pciauto_config_device(hose, dev); - - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00); -} -- cgit v1.2.3