From 1114257c9df3fa3db39ff55dd03d1f7cbc5c0603 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 6 Jun 2004 21:35:06 +0000 Subject: Patch by Yuli Barcohen, 19 Apr 2004: - Rename DUET_ADS to MPC885ADS - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY - Clean up FADS family port to use the new defines --- board/fads/fads.h | 51 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 14 deletions(-) (limited to 'board/fads/fads.h') diff --git a/board/fads/fads.h b/board/fads/fads.h index 668b906d56..d4e9f02c3a 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -48,9 +48,6 @@ * | ... | v * *****************************************************************************/ -/* should ALWAYS define this, measure_gclk in speed.c is unreliable */ -/* in general, we always know this for FADS+new ADS anyway */ -#define CONFIG_8xx_GCLK_FREQ ((CFG_8XX_XIN) * (CFG_8XX_FACT)) #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -66,6 +63,7 @@ "bootm" #undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ /* * New MPC86xADS and Duet provide two Ethernet connectivity options: @@ -90,11 +88,12 @@ #endif #ifndef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_DHCP \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PCMCIA \ + | CFG_CMD_PING \ ) #endif /* !CONFIG_COMMANDS */ @@ -146,7 +145,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#if defined(CONFIG_MPC86xADS) || defined(CONFIG_DUET_ADS) /* New ADS or Duet */ +#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */ #define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ #elif defined(CONFIG_FADS) /* Old/new FADS */ #define CFG_SDRAM_SIZE 0x00400000 /* 4 Mbyte */ @@ -186,7 +185,12 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ + +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ +#else #define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ +#endif /* CONFIG_BZIP2 */ /*----------------------------------------------------------------------- * Cache Configuration @@ -248,7 +252,16 @@ #define SCCR_MASK SCCR_EBDF11 #define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) - /*----------------------------------------------------------------------- +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 14-22 + *----------------------------------------------------------------------- + * set the PLL, the low-power modes and the reset control + */ +#ifndef CFG_PLPRCR +#define CFG_PLPRCR PLPRCR_TEXPS +#endif + +/*----------------------------------------------------------------------- * *----------------------------------------------------------------------- * @@ -407,6 +420,20 @@ #define BCSR4_DATA_VOICE ((uint)0x00080000) #endif /* CONFIG_MPC850 */ +/* BSCR5 exists on MPC86xADS and Duet ADS only */ + +#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000) + +#define BCSR5 (CFG_PHYDEV_ADDR + 0x300) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + /* We don't use the 8259. */ #define NR_8259_INTS 0 @@ -419,10 +446,6 @@ * PCMCIA stuff *----------------------------------------------------------------------- */ -#if !defined(CONFIG_MPC823) && !defined(CONFIG_MPC850) -#define PCMCIA_SLOT_A 1 -#endif - #define CFG_PCMCIA_MEM_ADDR (0xE0000000) #define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) #define CFG_PCMCIA_DMA_ADDR (0xE4000000) -- cgit v1.2.3