From 16f217049a70da97bc61eff7a95b4b6313850909 Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 26 Aug 2002 21:58:50 +0000 Subject: Initial revision --- board/esteem192e/esteem192e.c | 318 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 318 insertions(+) create mode 100644 board/esteem192e/esteem192e.c (limited to 'board/esteem192e/esteem192e.c') diff --git a/board/esteem192e/esteem192e.c b/board/esteem192e/esteem192e.c new file mode 100644 index 00000000000..792a61cf856 --- /dev/null +++ b/board/esteem192e/esteem192e.c @@ -0,0 +1,318 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Modified By Conn Clark to work with Esteem 192E 7/31/00 + * + */ + +#include +#include + +/* ------------------------------------------------------------------------- */ + +static long int dram_size ( long int *base, long int maxsize); + +/* ------------------------------------------------------------------------- */ + +#define _NOT_USED_ 0xFFFFFFFF + +const uint sdram_table[] = +{ + /* + * Single Read. (Offset 0 in UPMA RAM) + * + * active, NOP, read, precharge, NOP */ + 0x0F27CC04, 0x0EAECC04, 0x00B98C04, 0x00F74C00, + 0x11FFCC05, /* last */ + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * NOP, Program + */ + 0x0F0A8C34, 0x1F354C37, /* last */ + + _NOT_USED_, /* Not used */ + + /* + * Burst Read. (Offset 8 in UPMA RAM) + * active, NOP, read, NOP, NOP, NOP, NOP, NOP */ + 0x0F37CC04, 0x0EFECC04, 0x00FDCC04, 0x00FFCC00, + 0x00FFCC00, 0x01FFCC00, 0x0FFFCC00, 0x1FFFCC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Single Write. (Offset 18 in UPMA RAM) + * active, NOP, write, NOP, precharge, NOP */ + 0x0F27CC04, 0x0EAE8C00, 0x01BD4C04, 0x0FFB8C04, + 0x0FF74C04, 0x1FFFCC05, /* last */ + _NOT_USED_, _NOT_USED_, + /* + * Burst Write. (Offset 20 in UPMA RAM) + * active, NOP, write, NOP, NOP, NOP, NOP, NOP */ + 0x0F37CC04, 0x0EFE8C00, 0x00FD4C00, 0x00FFCC00, + 0x00FFCC00, 0x01FFCC04, 0x0FFFCC04, 0x1FFFCC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Refresh (Offset 30 in UPMA RAM) + * precharge, NOP, auto_ref, NOP, NOP, NOP */ + 0x0FF74C34, 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, + 0x0FFFCCB4, 0x1FFFCC35, /* last */ + _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x0FFB8C00, 0x1FF74C03, /* last */ + _NOT_USED_, _NOT_USED_ +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + puts ("Board: Esteem 192E\n"); + return(0); +} + +/* ------------------------------------------------------------------------- */ + + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0, size_b1; + + /* + * Explain frequency of refresh here + */ + + memctl->memc_mptpr = 0x0200; /* divide by 32 */ + + memctl->memc_mamr = 0x18003112; /*CFG_MAMR_8COL;*/ /* 0x18005112 TODO: explain here */ + + upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + + /* + * Map cs 2 and 3 to the SDRAM banks 0 and 1 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ + + memctl->memc_or2 = CFG_OR2_PRELIM; /* not defined yet */ + memctl->memc_br2 = CFG_BR2_PRELIM; + + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; + + + /* perform SDRAM initializsation sequence */ + memctl->memc_mar = 0x00000088; + + memctl->memc_mcr = 0x80004830; /* SDRAM bank 0 execute 8 refresh */ + + memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ + + + memctl->memc_mcr = 0x80006830; /* SDRAM bank 1 execute 8 refresh */ + + memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */ + + + memctl->memc_mamr = CFG_MAMR_8COL; /* 0x18803112 start refresh timer TODO: explain here */ + +/* printf ("banks 0 and 1 are programed\n"); */ + + /* + * Check Bank 0 Memory Size for re-configuration + * + */ + + size_b0 = dram_size ((ulong *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); + + size_b1 = dram_size ((ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); + + + printf ("\nbank 0 size %lu\nbank 1 size %lu\n",size_b0,size_b1); + + +/* printf ("bank 1 size %u\n",size_b1); */ + + if(size_b1 == 0) { + + /* + * Adjust refresh rate if bank 0 isn't stuffed + */ + + memctl->memc_mptpr = 0x0400; /* divide by 64 */ + memctl->memc_br3 &= 0x0FFFFFFFE; + + /* + * Adjust OR2 for size of bank 0 + */ + memctl->memc_or2 |= 7 * size_b0; + + } + + else { + + if(size_b0 < size_b1) { + memctl->memc_br2 &= 0x00007FFE; + memctl->memc_br3 &= 0x00007FFF; + + /* + * Adjust OR3 for size of bank 1 + */ + memctl->memc_or3 |= 15 * size_b1; + + /* + * Adjust OR2 for size of bank 0 + */ + memctl->memc_or2 |= 15 * size_b0; + + memctl->memc_br2 += (size_b1 + 1); + + } + else { + + memctl->memc_br3 &= 0x00007FFE; + + + /* + * Adjust OR2 for size of bank 0 + */ + memctl->memc_or2 |= 15 * size_b0; + + /* + * Adjust OR3 for size of bank 1 + */ + memctl->memc_or3 |= 15 * size_b1; + + memctl->memc_br3 += (size_b0 + 1); + + + } + } + + +/* before leaving set all unused i/o pins to outputs */ + +/* + * --*Unused Pin List*-- + * + * group/port bit number + * IP_B 0,1,3,4,5 Taken care of in pcmcia-cs-x.x.xx + * PA 5,7,8,9,14,15 + * PB 22,23,31 + * PC 4,5,6,7,10,11,12,13,14,15 + * PD 5,6,7 + * + */ + +/* + * --*Pin Used for I/O List*-- + * + * port input bit number output bit number either + * PB 18,26,27 + * PD 3,4 8,9,10,11,12,13,14,15 + * + */ + + + immap->im_ioport.iop_papar &= ~0x05C3; /* set pins as io */ + immap->im_ioport.iop_padir |= 0x05C3; /* set pins as output */ + immap->im_ioport.iop_paodr &= 0x0008; /* config pins 9 & 14 as normal outputs */ + immap->im_ioport.iop_padat |= 0x05C3; /* set unused pins as high */ + + immap->im_cpm.cp_pbpar &= ~0x00001331; /* set unused port b pins as io */ + immap->im_cpm.cp_pbdir |= 0x00001331; /* set unused port b pins as output */ + immap->im_cpm.cp_pbodr &= ~0x00001331; /* config bits 18,22,23,26,27 & 31 as normal outputs */ + immap->im_cpm.cp_pbdat |= 0x00001331; /* set T/E LED, /NV_CS, & /POWER_ADJ_CS and the rest to a high */ + + immap->im_ioport.iop_pcpar &= ~0x0F3F; /* set unused port c pins as io */ + immap->im_ioport.iop_pcdir |= 0x0F3F; /* set unused port c pins as output */ + immap->im_ioport.iop_pcso &= ~0x0F3F; /* clear special purpose bit for unused port c pins for clarity */ + immap->im_ioport.iop_pcdat |= 0x0F3F; /* set unused port c pins high*/ + + immap->im_ioport.iop_pdpar &= 0xE000; /* set pins as io */ + immap->im_ioport.iop_pddir &= 0xE000; /* set bit 3 & 4 as inputs */ + immap->im_ioport.iop_pddir |= 0x07FF; /* set bits 5 - 15 as outputs */ + immap->im_ioport.iop_pddat = 0x0055; /* set alternating pattern on test port */ + + + + + return (size_b0 + size_b1); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size ( long int *base, long int maxsize) +{ + + volatile long int *addr; + long int cnt, val; + + for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + return (0); + } + + for (cnt = 1; ; cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + + if (val != (~cnt)) { + return (cnt * sizeof(long)); + } + } + /* NOTREACHED */ +} -- cgit v1.2.3