From 221838cc7eb178370ff62aa05920a582e12ac322 Mon Sep 17 00:00:00 2001 From: Jason Jin Date: Tue, 10 Jul 2007 09:03:22 +0800 Subject: Remove the bios emulator from MAI board. The bios emulator in the MAI board can not pass compile and have a lot of crap in it. remove it and will have a clean and small bios emulator in the drivers directory which can be uesed for every board. Signed-off-by: Jason Jin --- .../bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm | 226 ------ .../MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c | 64 -- board/MAI/bios_emulator/scitech/src/pm/qnx/event.c | 601 -------------- .../MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c | 182 ----- board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h | 103 --- board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c | 891 --------------------- board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c | 49 -- .../MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c | 91 --- 8 files changed, 2207 deletions(-) delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/event.c delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c (limited to 'board/MAI/bios_emulator/scitech/src/pm/qnx') diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm b/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm deleted file mode 100644 index 5a3fe105ec..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm +++ /dev/null @@ -1,226 +0,0 @@ -;**************************************************************************** -;* -;* SciTech OS Portability Manager Library -;* -;* ======================================================================== -;* -;* The contents of this file are subject to the SciTech MGL Public -;* License Version 1.0 (the "License"); you may not use this file -;* except in compliance with the License. You may obtain a copy of -;* the License at http://www.scitechsoft.com/mgl-license.txt -;* -;* Software distributed under the License is distributed on an -;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -;* implied. See the License for the specific language governing -;* rights and limitations under the License. -;* -;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -;* -;* The Initial Developer of the Original Code is SciTech Software, Inc. -;* All Rights Reserved. -;* -;* ======================================================================== -;* -;* Language: NASM -;* Environment: QNX -;* -;* Description: Assembler support routines for the Memory Type Range Register -;* (MTRR) module for QNX. -;* -;**************************************************************************** - - IDEAL - -include "scitech.mac" ; Memory model macros - -header _mtrrqnx ; Set up memory model - -begdataseg _mtrrqnx ; Start of code segment - -ifdef USE_NASM -%define R0_FLUSH_TLB 0 -%define R0_SAVE_CR4 1 -%define R0_RESTORE_CR4 2 -%define R0_READ_MSR 3 -%define R0_WRITE_MSR 4 -else -R0_FLUSH_TLB EQU 0 -R0_SAVE_CR4 EQU 1 -R0_RESTORE_CR4 EQU 2 -R0_READ_MSR EQU 3 -R0_WRITE_MSR EQU 4 -endif - -cpublic _PM_R0 -_PM_R0_service dd 0 -_PM_R0_reg dd 0 -_PM_R0_eax dd 0 -_PM_R0_edx dd 0 - -enddataseg _mtrrqnx ; Start of code segment - -begcodeseg _mtrrqnx ; Start of code segment - -P586 - -;---------------------------------------------------------------------------- -; ulong _MTRR_disableInt(void); -;---------------------------------------------------------------------------- -; Return processor interrupt status and disable interrupts. -;---------------------------------------------------------------------------- -cprocstart _MTRR_disableInt - - pushfd ; Put flag word on stack -; cli ; Disable interrupts! - pop eax ; deposit flag word in return register - ret - -cprocend - -;---------------------------------------------------------------------------- -; void _MTRR_restoreInt(ulong ps); -;---------------------------------------------------------------------------- -; Restore processor interrupt status. -;---------------------------------------------------------------------------- -cprocstart _MTRR_restoreInt - - ARG ps:ULONG - - push ebp - mov ebp,esp ; Set up stack frame - push [ULONG ps] - popfd ; Restore processor status (and interrupts) - pop ebp - ret - -cprocend - -;---------------------------------------------------------------------------- -; uchar _MTRR_getCx86(uchar reg); -;---------------------------------------------------------------------------- -; Read a Cyrix CPU indexed register -;---------------------------------------------------------------------------- -cprocstart _MTRR_getCx86 - - ARG reg:UCHAR - - enter_c - mov al,[reg] - out 22h,al - in al,23h - leave_c - ret - -cprocend - -;---------------------------------------------------------------------------- -; uchar _MTRR_setCx86(uchar reg,uchar val); -;---------------------------------------------------------------------------- -; Write a Cyrix CPU indexed register -;---------------------------------------------------------------------------- -cprocstart _MTRR_setCx86 - - ARG reg:UCHAR, val:UCHAR - - enter_c - mov al,[reg] - out 22h,al - mov al,[val] - out 23h,al - leave_c - ret - -cprocend - -;---------------------------------------------------------------------------- -; ulong _PM_ring0_isr(void); -;---------------------------------------------------------------------------- -; Ring 0 clock interrupt handler that we use to execute the MTRR support -; code. -;---------------------------------------------------------------------------- -cprocnear _PM_ring0_isr - -;-------------------------------------------------------- -; void PM_flushTLB(void); -;-------------------------------------------------------- - pushad - cmp [DWORD _PM_R0_service],R0_FLUSH_TLB - jne @@1 - wbinvd ; Flush the CPU cache - mov eax,cr3 - mov cr3,eax ; Flush the TLB - jmp @@Exit - -;-------------------------------------------------------- -; ulong _MTRR_saveCR4(void); -;-------------------------------------------------------- -@@1: cmp [DWORD _PM_R0_service],R0_SAVE_CR4 - jne @@2 - -; Save value of CR4 and clear Page Global Enable (bit 7) - - mov ebx,cr4 - mov eax,ebx - and al,7Fh - mov cr4,eax - -; Disable and flush caches - - mov eax,cr0 - or eax,40000000h - wbinvd - mov cr0,eax - wbinvd - -; Return value from CR4 - - mov [_PM_R0_reg],ebx - jmp @@Exit - -;-------------------------------------------------------- -; void _MTRR_restoreCR4(ulong cr4Val) -;-------------------------------------------------------- -@@2: cmp [DWORD _PM_R0_service],R0_RESTORE_CR4 - jne @@3 - - mov eax,cr0 - and eax,0BFFFFFFFh - mov cr0,eax - mov eax,[_PM_R0_reg] - mov cr4,eax - jmp @@Exit - -;-------------------------------------------------------- -; void _MTRR_readMSR(int reg, ulong FAR *eax, ulong FAR *edx); -;-------------------------------------------------------- -@@3: cmp [DWORD _PM_R0_service],R0_READ_MSR - jne @@4 - - mov ecx,[_PM_R0_reg] - rdmsr - mov [_PM_R0_eax],eax - mov [_PM_R0_edx],edx - jmp @@Exit - -;-------------------------------------------------------- -; void _MTRR_writeMSR(int reg, ulong eax, ulong edx); -;-------------------------------------------------------- -@@4: cmp [DWORD _PM_R0_service],R0_WRITE_MSR - jne @@Exit - - mov ecx,[_PM_R0_reg] - mov eax,[_PM_R0_eax] - mov edx,[_PM_R0_edx] - wrmsr - jmp @@Exit - -@@Exit: mov [DWORD _PM_R0_service],-1 - popad - mov eax,0 - retf - -cprocend - -endcodeseg _mtrrqnx - - END ; End of module diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c deleted file mode 100644 index a8782542b2..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c +++ /dev/null @@ -1,64 +0,0 @@ -/**************************************************************************** -* -* Ultra Long Period Timer -* -* ======================================================================== -* -* The contents of this file are subject to the SciTech MGL Public -* License Version 1.0 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.scitechsoft.com/mgl-license.txt -* -* Software distributed under the License is distributed on an -* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -* -* The Initial Developer of the Original Code is SciTech Software, Inc. -* All Rights Reserved. -* -* ======================================================================== -* -* Language: ANSI C -* Environment: QNX -* -* Description: QNX specific code for the CPU detection module. -* -****************************************************************************/ - -/*----------------------------- Implementation ----------------------------*/ - -/**************************************************************************** -REMARKS: -TODO: We should implement this for QNX! -****************************************************************************/ -#define SetMaxThreadPriority() 0 - -/**************************************************************************** -REMARKS: -TODO: We should implement this for QNX! -****************************************************************************/ -#define RestoreThreadPriority(i) - -/**************************************************************************** -REMARKS: -Initialise the counter and return the frequency of the counter. -****************************************************************************/ -static void GetCounterFrequency( - CPU_largeInteger *freq) -{ - freq->low = CLOCKS_PER_SEC * 1000; - freq->high = 0; -} - -/**************************************************************************** -REMARKS: -Read the counter and return the counter value. -****************************************************************************/ -#define GetCounter(t) \ -{ \ - (t)->low = clock() * 1000; \ - (t)->high = 0; \ -} diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c deleted file mode 100644 index 45cd514454..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c +++ /dev/null @@ -1,601 +0,0 @@ -/**************************************************************************** -* -* SciTech Multi-platform Graphics Library -* -* ======================================================================== -* -* The contents of this file are subject to the SciTech MGL Public -* License Version 1.0 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.scitechsoft.com/mgl-license.txt -* -* Software distributed under the License is distributed on an -* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -* -* The Initial Developer of the Original Code is SciTech Software, Inc. -* All Rights Reserved. -* -* ======================================================================== -* -* Language: ANSI C -* Environment: QNX -* -* Description: QNX fullscreen console implementation for the SciTech -* cross platform event library. -* -****************************************************************************/ - -#include -#include - -/*--------------------------- Global variables ----------------------------*/ - -#ifndef __QNXNTO__ -static struct _mouse_ctrl *_PM_mouse_ctl; -static int _PM_keyboard_fd = -1; -/*static int _PM_modifiers, _PM_leds; */ -#else -static int kbd_fd = -1, mouse_fd = -1; -#endif -static int kill_pid = 0; -static ushort keyUpMsg[256] = {0};/* Table of key up messages */ -static int rangeX,rangeY; /* Range of mouse coordinates */ - -#define TIME_TO_MSEC(__t) ((__t).tv_nsec / 1000000 + (__t).tv_sec * 1000) - -#define LED_NUM 1 -#define LED_CAP 2 -#define LED_SCR 4 - -/* Scancode mappings on QNX for special keys */ - -typedef struct { - int scan; - int map; - } keymap; - -/* TODO: Fix this and set it up so we can do a binary search! */ - -keymap keymaps[] = { - {96, KB_padEnter}, - {74, KB_padMinus}, - {78, KB_padPlus}, - {55, KB_padTimes}, - {98, KB_padDivide}, - {71, KB_padHome}, - {72, KB_padUp}, - {73, KB_padPageUp}, - {75, KB_padLeft}, - {76, KB_padCenter}, - {77, KB_padRight}, - {79, KB_padEnd}, - {80, KB_padDown}, - {81, KB_padPageDown}, - {82, KB_padInsert}, - {83, KB_padDelete}, - {105,KB_left}, - {108,KB_down}, - {106,KB_right}, - {103,KB_up}, - {110,KB_insert}, - {102,KB_home}, - {104,KB_pageUp}, - {111,KB_delete}, - {107,KB_end}, - {109,KB_pageDown}, - {125,KB_leftWindows}, - {126,KB_rightWindows}, - {127,KB_menu}, - {100,KB_rightAlt}, - {97,KB_rightCtrl}, - }; - -/* And the keypad with num lock turned on (changes the ASCII code only) */ - -keymap keypad[] = { - {71, ASCII_7}, - {72, ASCII_8}, - {73, ASCII_9}, - {75, ASCII_4}, - {76, ASCII_5}, - {77, ASCII_6}, - {79, ASCII_1}, - {80, ASCII_2}, - {81, ASCII_3}, - {82, ASCII_0}, - {83, ASCII_period}, - }; - -#define NB_KEYMAPS (sizeof(keymaps)/sizeof(keymaps[0])) -#define NB_KEYPAD (sizeof(keypad)/sizeof(keypad[0])) - -/*---------------------------- Implementation -----------------------------*/ - -/**************************************************************************** -REMARKS: -Include generic raw scancode keyboard module. -****************************************************************************/ -#include "common/keyboard.c" - -/* These are not used under QNX */ -#define _EVT_disableInt() 1 -#define _EVT_restoreInt(flags) - -/**************************************************************************** -REMARKS: -This function is used to return the number of ticks since system -startup in milliseconds. This should be the same value that is placed into -the time stamp fields of events, and is used to implement auto mouse down -events. -****************************************************************************/ -ulong _EVT_getTicks(void) -{ - struct timespec t; - clock_gettime(CLOCK_REALTIME,&t); - return (t.tv_nsec / 1000000 + t.tv_sec * 1000); -} - -/**************************************************************************** -REMARKS: -Converts a mickey movement value to a pixel adjustment value. -****************************************************************************/ -static int MickeyToPixel( - int mickey) -{ - /* TODO: We can add some code in here to handle 'acceleration' for */ - /* the mouse cursor. For now just use the mickeys. */ - return mickey; -} - -#ifdef __QNXNTO__ -/**************************************************************************** -REMARKS: -Retrieves all events from the mouse/keyboard event queue and stuffs them -into the MGL event queue for further processing. -****************************************************************************/ -static void _EVT_pumpMessages(void) -{ - int rc1, rc2; - struct _keyboard_packet key; - struct _mouse_packet ms; - static long old_buttons = 0; - uint message = 0, but_stat = 0, mods = 0; - event_t evt; - - while (EVT.count < EVENTQSIZE) { - rc1 = read(kbd_fd, (void *)&key, sizeof(key)); - if (rc1 == -1) { - if (errno == EAGAIN) - rc1 = 0; - else { - perror("getEvents"); - PM_fatalError("Keyboard error"); - } - } - if (rc1 > 0) { - memset(&evt, 0, sizeof(evt)); - if (key.data.modifiers & KEYMOD_SHIFT) - mods |= EVT_LEFTSHIFT; - if (key.data.modifiers & KEYMOD_CTRL) - mods |= EVT_CTRLSTATE; - if (key.data.modifiers & KEYMOD_ALT) - mods |= EVT_ALTSTATE; - - /* Now store the keyboard event data */ - evt.when = TIME_TO_MSEC(key.time); - if (key.data.flags & KEY_SCAN_VALID) - evt.message |= (key.data.key_scan & 0x7F) << 8; - if ((key.data.flags & KEY_SYM_VALID) && - (((key.data.key_sym & 0xff00) == 0xf000 && - (key.data.key_sym & 0xff) < 0x20) || - key.data.key_sym < 0x80)) - evt.message |= (key.data.key_sym & 0xFF); - evt.modifiers = mods; - if (key.data.flags & KEY_DOWN) { - evt.what = EVT_KEYDOWN; - keyUpMsg[evt.message >> 8] = (ushort)evt.message; - } - else if (key.data.flags & KEY_REPEAT) { - evt.message |= 0x10000; - evt.what = EVT_KEYREPEAT; - } - else { - evt.what = EVT_KEYUP; - evt.message = keyUpMsg[evt.message >> 8]; - if (evt.message == 0) - continue; - keyUpMsg[evt.message >> 8] = 0; - } - - /* Now add the new event to the event queue */ - addEvent(&evt); - } - rc2 = read(mouse_fd, (void *)&ms, sizeof (ms)); - if (rc2 == -1) { - if (errno == EAGAIN) - rc2 = 0; - else { - perror("getEvents"); - PM_fatalError("Mouse error"); - } - } - if (rc2 > 0) { - memset(&evt, 0, sizeof(evt)); - ms.hdr.buttons &= - (_POINTER_BUTTON_LEFT | _POINTER_BUTTON_RIGHT); - if (ms.hdr.buttons & _POINTER_BUTTON_LEFT) - but_stat = EVT_LEFTBUT; - if ((ms.hdr.buttons & _POINTER_BUTTON_LEFT) != - (old_buttons & _POINTER_BUTTON_LEFT)) - message = EVT_LEFTBMASK; - if (ms.hdr.buttons & _POINTER_BUTTON_RIGHT) - but_stat |= EVT_RIGHTBUT; - if ((ms.hdr.buttons & _POINTER_BUTTON_RIGHT) != - (old_buttons & _POINTER_BUTTON_RIGHT)) - message |= EVT_RIGHTBMASK; - if (ms.dx || ms.dy) { - ms.dy = -ms.dy; - EVT.mx += MickeyToPixel(ms.dx); - EVT.my += MickeyToPixel(ms.dy); - if (EVT.mx < 0) EVT.mx = 0; - if (EVT.my < 0) EVT.my = 0; - if (EVT.mx > rangeX) EVT.mx = rangeX; - if (EVT.my > rangeY) EVT.my = rangeY; - evt.what = EVT_MOUSEMOVE; - evt.when = TIME_TO_MSEC(ms.hdr.time); - evt.where_x = EVT.mx; - evt.where_y = EVT.my; - evt.relative_x = ms.dx; - evt.relative_y = ms.dy; - evt.modifiers = but_stat; - addEvent(&evt); - } - evt.what = ms.hdr.buttons < old_buttons ? - EVT_MOUSEUP : EVT_MOUSEDOWN; - evt.when = TIME_TO_MSEC(ms.hdr.time); - evt.where_x = EVT.mx; - evt.where_y = EVT.my; - evt.relative_x = ms.dx; - evt.relative_y = ms.dy; - evt.modifiers = but_stat; - evt.message = message; - if (ms.hdr.buttons != old_buttons) { - addEvent(&evt); - old_buttons = ms.hdr.buttons; - } - } - if (rc1 + rc2 == 0) - break; - } -} -#else -/**************************************************************************** -REMARKS: -Retrieves all events from the mouse/keyboard event queue and stuffs them -into the MGL event queue for further processing. -****************************************************************************/ -static void _EVT_pumpMessages(void) -{ - struct mouse_event ev; - int rc; - static long old_buttons = 0; - uint message = 0, but_stat = 0; - event_t evt; - char buf[32]; - int numkeys, i; - - /* Poll keyboard events */ - while ((numkeys = read(_PM_keyboard_fd, buf, sizeof buf)) > 0) { - for (i = 0; i < numkeys; i++) { - processRawScanCode(buf[i]); - } - } - - if (_PM_mouse_ctl == NULL) - return; - - /* Gobble pending mouse events */ - while (EVT.count < EVENTQSIZE) { - rc = mouse_read(_PM_mouse_ctl, &ev, 1, 0, NULL); - if (rc == -1) { - perror("getEvents"); - PM_fatalError("Mouse error (Input terminated?)"); - } - if (rc == 0) - break; - - message = 0, but_stat = 0; - memset(&evt, 0, sizeof(evt)); - - ev.buttons &= (_MOUSE_LEFT | _MOUSE_RIGHT); - if (ev.buttons & _MOUSE_LEFT) - but_stat = EVT_LEFTBUT; - if ((ev.buttons & _MOUSE_LEFT) != (old_buttons & _MOUSE_LEFT)) - message = EVT_LEFTBMASK; - if (ev.buttons & _MOUSE_RIGHT) - but_stat |= EVT_RIGHTBUT; - if ((ev.buttons & _MOUSE_RIGHT) != (old_buttons & _MOUSE_RIGHT)) - message |= EVT_RIGHTBMASK; - if (ev.dx || ev.dy) { - ev.dy = -ev.dy; - EVT.mx += MickeyToPixel(ev.dx); - EVT.my += MickeyToPixel(ev.dy); - if (EVT.mx < 0) EVT.mx = 0; - if (EVT.my < 0) EVT.my = 0; - if (EVT.mx > rangeX) EVT.mx = rangeX; - if (EVT.my > rangeY) EVT.my = rangeY; - evt.what = EVT_MOUSEMOVE; - evt.when = ev.timestamp*100; - evt.where_x = EVT.mx; - evt.where_y = EVT.my; - evt.relative_x = ev.dx; - evt.relative_y = ev.dy; - evt.modifiers = but_stat; - addEvent(&evt); - } - evt.what = ev.buttons < old_buttons ? EVT_MOUSEUP : EVT_MOUSEDOWN; - evt.when = ev.timestamp*100; - evt.where_x = EVT.mx; - evt.where_y = EVT.my; - evt.relative_x = ev.dx; - evt.relative_y = ev.dy; - evt.modifiers = but_stat; - evt.message = message; - if (ev.buttons != old_buttons) { - addEvent(&evt); - old_buttons = ev.buttons; - } - } -} -#endif /* __QNXNTO__ */ - -/**************************************************************************** -REMARKS: -This macro/function is used to converts the scan codes reported by the -keyboard to our event libraries normalised format. We only have one scan -code for the 'A' key, and use shift modifiers to determine if it is a -Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way, -but the OS gives us 'cooked' scan codes, we have to translate them back -to the raw format. -****************************************************************************/ -#define _EVT_maskKeyCode(evt) - -/**************************************************************************** -REMARKS: -Safely abort the event module upon catching a fatal error. -****************************************************************************/ -void _EVT_abort( - int signo) -{ - char buf[80]; - - EVT_exit(); - sprintf(buf,"Terminating on signal %d",signo); - PM_fatalError(buf); -} - -/**************************************************************************** -PARAMETERS: -mouseMove - Callback function to call wheneve the mouse needs to be moved - -REMARKS: -Initiliase the event handling module. Here we install our mouse handling ISR -to be called whenever any button's are pressed or released. We also build -the free list of events in the event queue. - -We use handler number 2 of the mouse libraries interrupt handlers for our -event handling routines. -****************************************************************************/ -void EVTAPI EVT_init( - _EVT_mouseMoveHandler mouseMove) -{ - int i; - struct stat st; - char *iarg[16]; -#ifdef __QNXNTO__ - char buf[128]; - FILE *p; - int argno,len; -#endif - -#ifdef __QNXNTO__ - ThreadCtl(_NTO_TCTL_IO, 0); /* So joystick code won't blow up */ -#endif - - /* Initialise the event queue */ - EVT.mouseMove = mouseMove; - initEventQueue(); - memset(keyUpMsg,0,sizeof(keyUpMsg)); - -#ifdef __QNXNTO__ - /* - * User may already have input running with the right parameters. - * Thus they could start input at boot time, using the output of - * inputtrap, passing the the -r flag to make it run as a resource - * manager. - */ - if ((mouse_fd = open("/dev/mouse0", O_RDONLY | O_NONBLOCK)) < 0) { - /* Run inputtrap to get the args for input */ - if ((p = popen("inputtrap", "r")) == NULL) - PM_fatalError("Error running 'inputtrap'"); - fgets(buf, sizeof(buf), p); - pclose(p); - - /* Build the argument list */ - len = strlen(buf); - iarg[0] = buf; - for (i = 0, argno = 0; i < len && argno < 15;) { - if (argno == 1) { - /* - * Add flags to input's arg list. - * '-r' means run as resource - * manager, providing the /dev/mouse - * and /dev/keyboard interfaces. - * '-P' supresses the /dev/photon - * mechanism. - */ - iarg[argno++] = "-Pr"; - continue; - } - while (buf[i] == ' ') - i++; - if (buf[i] == '\0' || buf[i] == '\n') - break; - iarg[argno++] = &buf[i]; - while (buf[i] != ' ' - && buf[i] != '\0' && buf[i] != '\n') - i++; - buf[i++] = '\0'; - } - iarg[argno] = NULL; - - if ((kill_pid = spawnvp(P_NOWAITO, iarg[0], iarg)) == -1) { - perror("spawning input resmgr"); - PM_fatalError("Could not start input resmgr"); - } - for (i = 0; i < 10; i++) { - if (stat("/dev/mouse0", &st) == 0) - break; - sleep(1); - } - if ((mouse_fd = open("/dev/mouse0", O_RDONLY|O_NONBLOCK)) < 0) { - perror("/dev/mouse0"); - PM_fatalError("Could not open /dev/mouse0"); - } - } - if ((kbd_fd = open("/dev/keyboard0", O_RDONLY|O_NONBLOCK)) < 0) { - perror("/dev/keyboard0"); - PM_fatalError("Could not open /dev/keyboard0"); - } -#else - /* Connect to Input/Mouse for event handling */ - if (_PM_mouse_ctl == NULL) { - _PM_mouse_ctl = mouse_open(0, "/dev/mouse", 0); - - /* "Mouse" is not running; attempt to start it */ - if (_PM_mouse_ctl == NULL) { - iarg[0] = "mousetrap"; - iarg[1] = "start"; - iarg[2] = NULL; - if ((kill_pid = spawnvp(P_NOWAITO, iarg[0], (void*)iarg)) == -1) - perror("spawn (mousetrap)"); - else { - for (i = 0; i < 10; i++) { - if (stat("/dev/mouse", &st) == 0) - break; - sleep(1); - } - _PM_mouse_ctl = mouse_open(0, "/dev/mouse", 0); - } - } - } - if (_PM_keyboard_fd == -1) - _PM_keyboard_fd = open("/dev/kbd", O_RDONLY|O_NONBLOCK); -#endif - - /* Catch program termination signals so we can clean up properly */ - signal(SIGABRT, _EVT_abort); - signal(SIGFPE, _EVT_abort); - signal(SIGINT, _EVT_abort); -} - -/**************************************************************************** -REMARKS -Changes the range of coordinates returned by the mouse functions to the -specified range of values. This is used when changing between graphics -modes set the range of mouse coordinates for the new display mode. -****************************************************************************/ -void EVTAPI EVT_setMouseRange( - int xRes, - int yRes) -{ - rangeX = xRes; - rangeY = yRes; -} - -/**************************************************************************** -REMARKS -Modifes the mouse coordinates as necessary if scaling to OS coordinates, -and sets the OS mouse cursor position. -****************************************************************************/ -#define _EVT_setMousePos(x,y) - -/**************************************************************************** -REMARKS: -Initiailises the internal event handling modules. The EVT_suspend function -can be called to suspend event handling (such as when shelling out to DOS), -and this function can be used to resume it again later. -****************************************************************************/ -void EVT_resume(void) -{ - /* Do nothing for QNX */ -} - -/**************************************************************************** -REMARKS -Suspends all of our event handling operations. This is also used to -de-install the event handling code. -****************************************************************************/ -void EVT_suspend(void) -{ - /* Do nothing for QNX */ -} - -/**************************************************************************** -REMARKS -Exits the event module for program terminatation. -****************************************************************************/ -void EVT_exit(void) -{ -#ifdef __QNXNTO__ - char c; - int flags; - - if (kbd_fd != -1) { - close(kbd_fd); - kbd_fd = -1; - } - if (mouse_fd != -1) { - close(mouse_fd); - mouse_fd = -1; - } -#endif - - /* Restore signal handlers */ - signal(SIGABRT, SIG_DFL); - signal(SIGFPE, SIG_DFL); - signal(SIGINT, SIG_DFL); - -#ifndef __QNXNTO__ - /* Kill the Input/Mouse driver if we have spawned it */ - if (_PM_mouse_ctl != NULL) { - struct _fd_entry fde; - uint pid = 0; - - /* Find out the pid of the mouse driver */ - if (kill_pid > 0) { - if (qnx_fd_query(0, - 0, _PM_mouse_ctl->fd, &fde) != -1) - pid = fde.pid; - } - mouse_close(_PM_mouse_ctl); - _PM_mouse_ctl = NULL; - - if (pid > 0) { - /* For some reasons the PID's are different under QNX4, - * so we use the old mechanism to kill the mouse server. - */ - kill(pid, SIGTERM); - kill_pid = 0; - } - } -#endif - if (kill_pid > 0) { - kill(kill_pid, SIGTERM); - kill_pid = 0; - } -} diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c deleted file mode 100644 index f960c75714..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c +++ /dev/null @@ -1,182 +0,0 @@ -/**************************************************************************** -* -* SciTech OS Portability Manager Library -* -* ======================================================================== -* -* The contents of this file are subject to the SciTech MGL Public -* License Version 1.0 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.scitechsoft.com/mgl-license.txt -* -* Software distributed under the License is distributed on an -* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -* -* The Initial Developer of the Original Code is SciTech Software, Inc. -* All Rights Reserved. -* -* ======================================================================== -* -* Language: ANSI C -* Environment: QNX -* -* Description: MTRR helper functions module. To make it easier to implement -* the MTRR support under QNX, we simply put our ring 0 helper -* functions into stubs that run them at ring 0 using whatever -* mechanism is available. -* -****************************************************************************/ - -#include "pmapi.h" -#include -#include -#include -#ifdef __QNXNTO__ -#include -#include -#else -#include -#include -#endif - -/*--------------------------- Global variables ----------------------------*/ - -#define R0_FLUSH_TLB 0 -#define R0_SAVE_CR4 1 -#define R0_RESTORE_CR4 2 -#define R0_READ_MSR 3 -#define R0_WRITE_MSR 4 - -typedef struct { - int service; - int reg; - ulong eax; - ulong edx; - } R0_data; - -extern volatile R0_data _PM_R0; - -/*----------------------------- Implementation ----------------------------*/ - -#ifdef __QNXNTO__ -const struct sigevent * _ASMAPI _PM_ring0_isr(void *arg, int id); -#else -pid_t far _ASMAPI _PM_ring0_isr(); -#endif - -/**************************************************************************** -REMARKS: -Return true if ring 0 (or if we can call the helpers functions at ring 0) -****************************************************************************/ -ibool _ASMAPI _MTRR_isRing0(void) -{ -#ifdef __QNXNTO__ - return false; /* Not implemented yet! */ -#else - return true; -#endif -} - -/**************************************************************************** -REMARKS: -Function to execute a service at ring 0. This is done using the clock -interrupt handler since the code we attach to it will always run at ring 0. -****************************************************************************/ -static void CallRing0(void) -{ -#ifdef __QNXNTO__ - uint clock_intno = SYSPAGE_ENTRY(qtime)->intr; -#else - uint clock_intno = 0; /* clock irq */ -#endif - int intrid; - -#ifdef __QNXNTO__ - mlock((void*)&_PM_R0, sizeof(_PM_R0)); - ThreadCtl(_NTO_TCTL_IO, 0); -#endif -#ifdef __QNXNTO__ - if ((intrid = InterruptAttach(_NTO_INTR_CLASS_EXTERNAL | clock_intno, - _PM_ring0_isr, (void*)&_PM_R0, sizeof(_PM_R0), _NTO_INTR_FLAGS_END)) == -1) { -#else - if ((intrid = qnx_hint_attach(clock_intno, _PM_ring0_isr, FP_SEG(&_PM_R0))) == -1) { -#endif - perror("Attach"); - exit(-1); - } - while (_PM_R0.service != -1) - ; -#ifdef __QNXNTO__ - InterruptDetachId(intrid); -#else - qnx_hint_detach(intrid); -#endif -} - -/**************************************************************************** -REMARKS: -Flush the translation lookaside buffer. -****************************************************************************/ -void PMAPI PM_flushTLB(void) -{ - _PM_R0.service = R0_FLUSH_TLB; - CallRing0(); -} - -/**************************************************************************** -REMARKS: -Read and return the value of the CR4 register -****************************************************************************/ -ulong _ASMAPI _MTRR_saveCR4(void) -{ - _PM_R0.service = R0_SAVE_CR4; - CallRing0(); - return _PM_R0.reg; -} - -/**************************************************************************** -REMARKS: -Restore the value of the CR4 register -****************************************************************************/ -void _ASMAPI _MTRR_restoreCR4(ulong cr4Val) -{ - _PM_R0.service = R0_RESTORE_CR4; - _PM_R0.reg = cr4Val; - CallRing0(); -} - -/**************************************************************************** -REMARKS: -Read a machine status register for the CPU. -****************************************************************************/ -void _ASMAPI _MTRR_readMSR( - int reg, - ulong *eax, - ulong *edx) -{ - _PM_R0.service = R0_READ_MSR; - _PM_R0.reg = reg; - CallRing0(); - *eax = _PM_R0.eax; - *edx = _PM_R0.edx; -} - -/**************************************************************************** -REMARKS: -Write a machine status register for the CPU. -****************************************************************************/ -void _ASMAPI _MTRR_writeMSR( - int reg, - ulong eax, - ulong edx) -{ - _PM_R0.service = R0_WRITE_MSR; - _PM_R0.reg = reg; - _PM_R0.eax = eax; - _PM_R0.edx = edx; - CallRing0(); -} diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h deleted file mode 100644 index 0961193049..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h +++ /dev/null @@ -1,103 +0,0 @@ -/**************************************************************************** -* -* SciTech Multi-platform Graphics Library -* -* ======================================================================== -* -* The contents of this file are subject to the SciTech MGL Public -* License Version 1.0 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.scitechsoft.com/mgl-license.txt -* -* Software distributed under the License is distributed on an -* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -* -* The Initial Developer of the Original Code is SciTech Software, Inc. -* All Rights Reserved. -* -* ======================================================================== -* -* Language: ANSI C -* Environment: QNX -* -* Description: Include file to include all OS specific header files. -* -****************************************************************************/ - -#include -#include -#include -#include -#ifndef __QNXNTO__ -#include -#include -#include -#include -#else -#include - -/* Things 'borrowed' from photon/keycodes.h */ - -/* - * Keyboard modifiers - */ -#define KEYMODBIT_SHIFT 0 -#define KEYMODBIT_CTRL 1 -#define KEYMODBIT_ALT 2 -#define KEYMODBIT_ALTGR 3 -#define KEYMODBIT_SHL3 4 -#define KEYMODBIT_MOD6 5 -#define KEYMODBIT_MOD7 6 -#define KEYMODBIT_MOD8 7 - -#define KEYMODBIT_SHIFT_LOCK 8 -#define KEYMODBIT_CTRL_LOCK 9 -#define KEYMODBIT_ALT_LOCK 10 -#define KEYMODBIT_ALTGR_LOCK 11 -#define KEYMODBIT_SHL3_LOCK 12 -#define KEYMODBIT_MOD6_LOCK 13 -#define KEYMODBIT_MOD7_LOCK 14 -#define KEYMODBIT_MOD8_LOCK 15 - -#define KEYMODBIT_CAPS_LOCK 16 -#define KEYMODBIT_NUM_LOCK 17 -#define KEYMODBIT_SCROLL_LOCK 18 - -#define KEYMOD_SHIFT (1 << KEYMODBIT_SHIFT) -#define KEYMOD_CTRL (1 << KEYMODBIT_CTRL) -#define KEYMOD_ALT (1 << KEYMODBIT_ALT) -#define KEYMOD_ALTGR (1 << KEYMODBIT_ALTGR) -#define KEYMOD_SHL3 (1 << KEYMODBIT_SHL3) -#define KEYMOD_MOD6 (1 << KEYMODBIT_MOD6) -#define KEYMOD_MOD7 (1 << KEYMODBIT_MOD7) -#define KEYMOD_MOD8 (1 << KEYMODBIT_MOD8) - -#define KEYMOD_SHIFT_LOCK (1 << KEYMODBIT_SHIFT_LOCK) -#define KEYMOD_CTRL_LOCK (1 << KEYMODBIT_CTRL_LOCK) -#define KEYMOD_ALT_LOCK (1 << KEYMODBIT_ALT_LOCK) -#define KEYMOD_ALTGR_LOCK (1 << KEYMODBIT_ALTGR_LOCK) -#define KEYMOD_SHL3_LOCK (1 << KEYMODBIT_SHL3_LOCK) -#define KEYMOD_MOD6_LOCK (1 << KEYMODBIT_MOD6_LOCK) -#define KEYMOD_MOD7_LOCK (1 << KEYMODBIT_MOD7_LOCK) -#define KEYMOD_MOD8_LOCK (1 << KEYMODBIT_MOD8_LOCK) - -#define KEYMOD_CAPS_LOCK (1 << KEYMODBIT_CAPS_LOCK) -#define KEYMOD_NUM_LOCK (1 << KEYMODBIT_NUM_LOCK) -#define KEYMOD_SCROLL_LOCK (1 << KEYMODBIT_SCROLL_LOCK) - -/* - * Keyboard flags - */ -#define KEY_DOWN 0x00000001 /* Key was pressed down */ -#define KEY_REPEAT 0x00000002 /* Key was repeated */ -#define KEY_SCAN_VALID 0x00000020 /* Scancode is valid */ -#define KEY_SYM_VALID 0x00000040 /* Key symbol is valid */ -#define KEY_CAP_VALID 0x00000080 /* Key cap is valid */ -#define KEY_DEAD 0x40000000 /* Key symbol is a DEAD key */ -#define KEY_OEM_CAP 0x80000000 /* Key cap is an OEM scan code from keyboard */ - -#endif /* __QNXNTO__ */ diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c deleted file mode 100644 index c993ee0837..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c +++ /dev/null @@ -1,891 +0,0 @@ -/**************************************************************************** -* -* SciTech OS Portability Manager Library -* -* ======================================================================== -* -* The contents of this file are subject to the SciTech MGL Public -* License Version 1.0 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.scitechsoft.com/mgl-license.txt -* -* Software distributed under the License is distributed on an -* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -* -* The Initial Developer of the Original Code is SciTech Software, Inc. -* All Rights Reserved. -* -* ======================================================================== -* -* Language: ANSI C -* Environment: QNX -* -* Description: Implementation for the OS Portability Manager Library, which -* contains functions to implement OS specific services in a -* generic, cross platform API. Porting the OS Portability -* Manager library is the first step to porting any SciTech -* products to a new platform. -* -****************************************************************************/ - -#include "pmapi.h" -#include "drvlib/os/os.h" -#include "mtrr.h" -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "qnx/vbios.h" -#ifndef __QNXNTO__ -#include -#include -#include -#include -#else -#include -#include -#endif - -/*--------------------------- Global variables ----------------------------*/ - -static uint VESABuf_len = 1024; /* Length of the VESABuf buffer */ -static void *VESABuf_ptr = NULL; /* Near pointer to VESABuf */ -static uint VESABuf_rseg; /* Real mode segment of VESABuf */ -static uint VESABuf_roff; /* Real mode offset of VESABuf */ -static VBIOSregs_t *VRegs = NULL; /* Pointer to VBIOS registers */ -static int raw_count = 0; -static struct _console_ctrl *cc = NULL; -static int console_count = 0; -static int rmbuf_inuse = 0; - -static void (PMAPIP fatalErrorCleanup)(void) = NULL; - -/*----------------------------- Implementation ----------------------------*/ - -void PMAPI PM_init(void) -{ - char *force; - - if (VRegs == NULL) { -#ifdef __QNXNTO__ - ThreadCtl(_NTO_TCTL_IO, 0); /* Get IO privilidge */ -#endif - force = getenv("VBIOS_METHOD"); - VRegs = VBIOSinit(force ? atoi(force) : 0); - } -#ifndef __QNXNTO__ - MTRR_init(); -#endif -} - -ibool PMAPI PM_haveBIOSAccess(void) -{ return VRegs != NULL; } - -long PMAPI PM_getOSType(void) -{ return _OS_QNX; } - -int PMAPI PM_getModeType(void) -{ return PM_386; } - -void PMAPI PM_backslash(char *s) -{ - uint pos = strlen(s); - if (s[pos-1] != '/') { - s[pos] = '/'; - s[pos+1] = '\0'; - } -} - -void PMAPI PM_setFatalErrorCleanup( - void (PMAPIP cleanup)(void)) -{ - fatalErrorCleanup = cleanup; -} - -void PMAPI PM_fatalError(const char *msg) -{ - if (fatalErrorCleanup) - fatalErrorCleanup(); - fprintf(stderr,"%s\n", msg); - exit(1); -} - -static void ExitVBEBuf(void) -{ - if (VESABuf_ptr) - PM_freeRealSeg(VESABuf_ptr); - VESABuf_ptr = 0; -} - -void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff) -{ - if (!VESABuf_ptr) { - /* Allocate a global buffer for communicating with the VESA VBE */ - if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL) - return NULL; - atexit(ExitVBEBuf); - } - *len = VESABuf_len; - *rseg = VESABuf_rseg; - *roff = VESABuf_roff; - return VESABuf_ptr; -} - -static int term_raw(void) -{ - struct termios termios_p; - - if (raw_count++ > 0) - return 0; - - /* Go into "raw" input mode */ - if (tcgetattr(STDIN_FILENO, &termios_p)) - return -1; - - termios_p.c_cc[VMIN] = 1; - termios_p.c_cc[VTIME] = 0; - termios_p.c_lflag &= ~( ECHO|ICANON|ISIG|ECHOE|ECHOK|ECHONL); - tcsetattr(STDIN_FILENO, TCSADRAIN, &termios_p); - return 0; -} - -static void term_restore(void) -{ - struct termios termios_p; - - if (raw_count-- != 1) - return; - - tcgetattr(STDIN_FILENO, &termios_p); - termios_p.c_lflag |= (ECHO|ICANON|ISIG|ECHOE|ECHOK|ECHONL); - termios_p.c_oflag |= (OPOST); - tcsetattr(STDIN_FILENO, TCSADRAIN, &termios_p); -} - -int PMAPI PM_kbhit(void) -{ - int blocking, c; - - if (term_raw() == -1) - return 0; - - /* Go into non blocking mode */ - blocking = fcntl(STDIN_FILENO, F_GETFL) | O_NONBLOCK; - fcntl(STDIN_FILENO, F_SETFL, blocking); - c = getc(stdin); - - /* restore blocking mode */ - fcntl(STDIN_FILENO, F_SETFL, blocking & ~O_NONBLOCK); - term_restore(); - if (c != EOF) { - ungetc(c, stdin); - return c; - } - clearerr(stdin); - return 0; -} - -int PMAPI PM_getch(void) -{ - int c; - - if (term_raw() == -1) - return (0); - c = getc(stdin); -#if defined(__QNX__) && !defined(__QNXNTO__) - if (c == 0xA) - c = 0x0D; - else if (c == 0x7F) - c = 0x08; -#endif - term_restore(); - return c; -} - -PM_HWND PMAPI PM_openConsole( - PM_HWND hwndUser, - int device, - int xRes, - int yRes, - int bpp, - ibool fullScreen) -{ -#ifndef __QNXNTO__ - int fd; - - if (console_count++) - return 0; - if ((fd = open("/dev/con1", O_RDWR)) == -1) - return -1; - cc = console_open(fd, O_RDWR); - close(fd); - if (cc == NULL) - return -1; -#endif - return 1; -} - -int PMAPI PM_getConsoleStateSize(void) -{ - return PM_getVGAStateSize() + sizeof(int) * 3; -} - -void PMAPI PM_saveConsoleState(void *stateBuf,int console_id) -{ -#ifdef __QNXNTO__ - int fd; - int flags; - - if ((fd = open("/dev/con1", O_RDWR)) == -1) - return; - flags = _CONCTL_INVISIBLE_CHG | _CONCTL_INVISIBLE; - devctl(fd, DCMD_CHR_SERCTL, &flags, sizeof flags, 0); - close(fd); -#else - uchar *buf = &((uchar*)stateBuf)[PM_getVGAStateSize()]; - - /* Save QNX 4 console state */ - console_read(cc, -1, 0, NULL, 0, - (int *)buf+1, (int *)buf+2, NULL); - *(int *)buf = console_ctrl(cc, -1, - CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE, - CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE); - - /* Save state of VGA registers */ - PM_saveVGAState(stateBuf); -#endif -} - -void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags)) -{ - /* TODO: Implement support for console switching if possible */ -} - -void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole) -{ -#ifdef __QNXNTO__ - int fd; - int flags; - - if ((fd = open("/dev/con1", O_RDWR)) == -1) - return; - flags = _CONCTL_INVISIBLE_CHG; - devctl(fd, DCMD_CHR_SERCTL, &flags, sizeof flags, 0); - close(fd); -#else - uchar *buf = &((uchar*)stateBuf)[PM_getVGAStateSize()]; - - /* Restore the state of the VGA compatible registers */ - PM_restoreVGAState(stateBuf); - - /* Restore QNX 4 console state */ - console_ctrl(cc, -1, *(int *)buf, - CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE); - console_write(cc, -1, 0, NULL, 0, - (int *)buf+1, (int *)buf+2, NULL); -#endif -} - -void PMAPI PM_closeConsole(PM_HWND hwndConsole) -{ -#ifndef __QNXNTO__ - if (--console_count == 0) { - console_close(cc); - cc = NULL; - } -#endif -} - -void PM_setOSCursorLocation(int x,int y) -{ - if (!cc) - return; -#ifndef __QNXNTO__ - console_write(cc, -1, 0, NULL, 0, &y, &x, NULL); -#endif -} - -void PM_setOSScreenWidth(int width,int height) -{ -} - -ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler ih, int frequency) -{ - /* TODO: Implement this for QNX */ - return false; -} - -void PMAPI PM_setRealTimeClockFrequency(int frequency) -{ - /* TODO: Implement this for QNX */ -} - -void PMAPI PM_restoreRealTimeClockHandler(void) -{ - /* TODO: Implement this for QNX */ -} - -char * PMAPI PM_getCurrentPath( - char *path, - int maxLen) -{ - return getcwd(path,maxLen); -} - -char PMAPI PM_getBootDrive(void) -{ return '/'; } - -const char * PMAPI PM_getVBEAFPath(void) -{ return PM_getNucleusConfigPath(); } - -const char * PMAPI PM_getNucleusPath(void) -{ - char *env = getenv("NUCLEUS_PATH"); -#ifdef __QNXNTO__ -#ifdef __X86__ - return env ? env : "/nto/scitech/x86/bin"; -#elif defined (__PPC__) - return env ? env : "/nto/scitech/ppcbe/bin"; -#elif defined (__MIPS__) -#ifdef __BIGENDIAN__ - return env ? env : "/nto/scitech/mipsbe/bin"; -#else - return env ? env : "/nto/scitech/mipsle/bin"; -#endif -#elif defined (__SH__) -#ifdef __BIGENDIAN__ - return env ? env : "/nto/scitech/shbe/bin"; -#else - return env ? env : "/nto/scitech/shle/bin"; -#endif -#elif defined (__ARM__) - return env ? env : "/nto/scitech/armle/bin"; -#endif -#else /* QNX 4 */ - return env ? env : "/qnx4/scitech/bin"; -#endif -} - -const char * PMAPI PM_getNucleusConfigPath(void) -{ - static char path[512]; - char *env; -#ifdef __QNXNTO__ - char temp[64]; - gethostname(temp, sizeof (temp)); - temp[sizeof (temp) - 1] = '\0'; /* Paranoid */ - sprintf(path,"/etc/config/scitech/%s/config", temp); -#else - sprintf(path,"/etc/config/scitech/%d/config", getnid()); -#endif - if ((env = getenv("NUCLEUS_PATH")) != NULL) { - strcpy(path,env); - PM_backslash(path); - strcat(path,"config"); - } - return path; -} - -const char * PMAPI PM_getUniqueID(void) -{ - static char buf[128]; -#ifdef __QNXNTO__ - gethostname(buf, sizeof (buf)); -#else - sprintf(buf,"node%d", getnid()); -#endif - return buf; -} - -const char * PMAPI PM_getMachineName(void) -{ - static char buf[128]; -#ifdef __QNXNTO__ - gethostname(buf, sizeof (buf)); -#else - sprintf(buf,"node%d", getnid()); -#endif - return buf; -} - -void * PMAPI PM_getBIOSPointer(void) -{ - return PM_mapRealPointer(0, 0x400); -} - -void * PMAPI PM_getA0000Pointer(void) -{ - static void *ptr = NULL; - void *freeptr; - unsigned offset, i, maplen; - - if (ptr != NULL) - return ptr; - - /* Some trickery is required to get the linear address 64K aligned */ - for (i = 0; i < 5; i++) { - ptr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true); - offset = 0x10000 - ((unsigned)ptr % 0x10000); - if (!offset) - break; - munmap(ptr, 0x10000); - maplen = 0x10000 + offset; - freeptr = PM_mapPhysicalAddr(0xA0000-offset, maplen-1,true); - ptr = (void *)(offset + (unsigned)freeptr); - if (0x10000 - ((unsigned)ptr % 0x10000)) - break; - munmap(freeptr, maplen); - } - if (i == 5) { - printf("Could not get a 64K aligned linear address for A0000 region\n"); - exit(1); - } - return ptr; -} - -void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached) -{ - uchar_t *p; - unsigned o; - unsigned prot = PROT_READ|PROT_WRITE|(isCached?0:PROT_NOCACHE); -#ifdef __PAGESIZE - int pagesize = __PAGESIZE; -#else - int pagesize = 4096; -#endif - int rounddown = base % pagesize; -#ifndef __QNXNTO__ - static int __VidFD = -1; -#endif - - if (rounddown) { - if (base < rounddown) - return NULL; - base -= rounddown; - limit += rounddown; - } - -#ifndef __QNXNTO__ - if (__VidFD < 0) { - if ((__VidFD = shm_open( "Physical", O_RDWR, 0777 )) == -1) { - perror( "Cannot open Physical memory" ); - exit(1); - } - } - o = base & 0xFFF; - limit = (limit + o + 0xFFF) & ~0xFFF; - if ((int)(p = mmap( 0, limit, prot, MAP_SHARED, - __VidFD, base )) == -1 ) { - return NULL; - } - p += o; -#else - if ((p = mmap(0, limit, prot, MAP_PHYS | MAP_SHARED, - NOFD, base)) == MAP_FAILED) { - return (void *)-1; - } -#endif - return (p + rounddown); -} - -void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit) -{ - munmap(ptr,limit+1); -} - -ulong PMAPI PM_getPhysicalAddr(void *p) -{ - /* TODO: This function should find the physical address of a linear */ - /* address. */ - return 0xFFFFFFFFUL; -} - -ibool PMAPI PM_getPhysicalAddrRange( - void *p, - ulong length, - ulong *physAddress) -{ - /* TODO: Implement this! */ - return false; -} - -void PMAPI PM_sleep(ulong milliseconds) -{ - /* TODO: Put the process to sleep for milliseconds */ -} - -int PMAPI PM_getCOMPort(int port) -{ - /* TODO: Re-code this to determine real values using the Plug and Play */ - /* manager for the OS. */ - switch (port) { - case 0: return 0x3F8; - case 1: return 0x2F8; - } - return 0; -} - -int PMAPI PM_getLPTPort(int port) -{ - /* TODO: Re-code this to determine real values using the Plug and Play */ - /* manager for the OS. */ - switch (port) { - case 0: return 0x3BC; - case 1: return 0x378; - case 2: return 0x278; - } - return 0; -} - -void * PMAPI PM_mallocShared(long size) -{ - return PM_malloc(size); -} - -void PMAPI PM_freeShared(void *ptr) -{ - PM_free(ptr); -} - -void * PMAPI PM_mapToProcess(void *base,ulong limit) -{ return (void*)base; } - -void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off) -{ - void *p; - - PM_init(); - - if ((p = VBIOSgetmemptr(r_seg, r_off, VRegs)) == (void *)-1) - return NULL; - return p; -} - -void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off) -{ - if (size > 1024) { - printf("PM_allocRealSeg: can't handle %d bytes\n", size); - return 0; - } - if (rmbuf_inuse != 0) { - printf("PM_allocRealSeg: transfer area already in use\n"); - return 0; - } - PM_init(); - rmbuf_inuse = 1; - *r_seg = VBIOS_TransBufVSeg(VRegs); - *r_off = VBIOS_TransBufVOff(VRegs); - return (void*)VBIOS_TransBufPtr(VRegs); -} - -void PMAPI PM_freeRealSeg(void *mem) -{ - if (rmbuf_inuse == 0) { - printf("PM_freeRealSeg: nothing was allocated\n"); - return; - } - rmbuf_inuse = 0; -} - -void PMAPI DPMI_int86(int intno, DPMI_regs *regs) -{ - PM_init(); - if (VRegs == NULL) - return; - - VRegs->l.eax = regs->eax; - VRegs->l.ebx = regs->ebx; - VRegs->l.ecx = regs->ecx; - VRegs->l.edx = regs->edx; - VRegs->l.esi = regs->esi; - VRegs->l.edi = regs->edi; - - VBIOSint(intno, VRegs, 1024); - - regs->eax = VRegs->l.eax; - regs->ebx = VRegs->l.ebx; - regs->ecx = VRegs->l.ecx; - regs->edx = VRegs->l.edx; - regs->esi = VRegs->l.esi; - regs->edi = VRegs->l.edi; - regs->flags = VRegs->w.flags & 0x1; -} - -int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out) -{ - PM_init(); - if (VRegs == NULL) - return 0; - - VRegs->l.eax = in->e.eax; - VRegs->l.ebx = in->e.ebx; - VRegs->l.ecx = in->e.ecx; - VRegs->l.edx = in->e.edx; - VRegs->l.esi = in->e.esi; - VRegs->l.edi = in->e.edi; - - VBIOSint(intno, VRegs, 1024); - - out->e.eax = VRegs->l.eax; - out->e.ebx = VRegs->l.ebx; - out->e.ecx = VRegs->l.ecx; - out->e.edx = VRegs->l.edx; - out->e.esi = VRegs->l.esi; - out->e.edi = VRegs->l.edi; - out->x.cflag = VRegs->w.flags & 0x1; - - return out->x.ax; -} - -int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out, - RMSREGS *sregs) -{ - PM_init(); - if (VRegs == NULL) - return 0; - - if (intno == 0x21) { - time_t today = time(NULL); - struct tm *t; - t = localtime(&today); - out->x.cx = t->tm_year + 1900; - out->h.dh = t->tm_mon + 1; - out->h.dl = t->tm_mday; - return 0; - } - else { - VRegs->l.eax = in->e.eax; - VRegs->l.ebx = in->e.ebx; - VRegs->l.ecx = in->e.ecx; - VRegs->l.edx = in->e.edx; - VRegs->l.esi = in->e.esi; - VRegs->l.edi = in->e.edi; - VRegs->w.es = sregs->es; - VRegs->w.ds = sregs->ds; - - VBIOSint(intno, VRegs, 1024); - - out->e.eax = VRegs->l.eax; - out->e.ebx = VRegs->l.ebx; - out->e.ecx = VRegs->l.ecx; - out->e.edx = VRegs->l.edx; - out->e.esi = VRegs->l.esi; - out->e.edi = VRegs->l.edi; - out->x.cflag = VRegs->w.flags & 0x1; - sregs->es = VRegs->w.es; - sregs->ds = VRegs->w.ds; - - return out->x.ax; - } -} - -void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in, - RMSREGS *sregs) -{ - PM_init(); - if (VRegs == NULL) - return; - - VRegs->l.eax = in->e.eax; - VRegs->l.ebx = in->e.ebx; - VRegs->l.ecx = in->e.ecx; - VRegs->l.edx = in->e.edx; - VRegs->l.esi = in->e.esi; - VRegs->l.edi = in->e.edi; - VRegs->w.es = sregs->es; - VRegs->w.ds = sregs->ds; - - VBIOScall(seg, off, VRegs, 1024); - - in->e.eax = VRegs->l.eax; - in->e.ebx = VRegs->l.ebx; - in->e.ecx = VRegs->l.ecx; - in->e.edx = VRegs->l.edx; - in->e.esi = VRegs->l.esi; - in->e.edi = VRegs->l.edi; - in->x.cflag = VRegs->w.flags & 0x1; - sregs->es = VRegs->w.es; - sregs->ds = VRegs->w.ds; -} - -void PMAPI PM_availableMemory(ulong *physical,ulong *total) -{ -#ifndef __QNXNTO__ - *physical = *total = _memavl(); -#endif -} - -void * PMAPI PM_allocLockedMem( - uint size, - ulong *physAddr, - ibool contiguous, - ibool below16M) -{ - /* TODO: Implement this on QNX */ - return NULL; -} - -void PMAPI PM_freeLockedMem( - void *p, - uint size, - ibool contiguous) -{ - /* TODO: Implement this on QNX */ -} - -void * PMAPI PM_allocPage( - ibool locked) -{ - /* TODO: Implement this on QNX */ - return NULL; -} - -void PMAPI PM_freePage( - void *p) -{ - /* TODO: Implement this on QNX */ -} - -void PMAPI PM_setBankA(int bank) -{ - PM_init(); - if (VRegs == NULL) - return; - - VRegs->l.eax = 0x4F05; - VRegs->l.ebx = 0x0000; - VRegs->l.edx = bank; - VBIOSint(0x10, VRegs, 1024); -} - -void PMAPI PM_setBankAB(int bank) -{ - PM_init(); - if (VRegs == NULL) - return; - - VRegs->l.eax = 0x4F05; - VRegs->l.ebx = 0x0000; - VRegs->l.edx = bank; - VBIOSint(0x10, VRegs, 1024); - - VRegs->l.eax = 0x4F05; - VRegs->l.ebx = 0x0001; - VRegs->l.edx = bank; - VBIOSint(0x10, VRegs, 1024); -} - -void PMAPI PM_setCRTStart(int x,int y,int waitVRT) -{ - PM_init(); - if (VRegs == NULL) - return; - - VRegs->l.eax = 0x4F07; - VRegs->l.ebx = waitVRT; - VRegs->l.ecx = x; - VRegs->l.edx = y; - VBIOSint(0x10, VRegs, 1024); -} - -ibool PMAPI PM_doBIOSPOST( - ushort axVal, - ulong BIOSPhysAddr, - void *copyOfBIOS, - ulong BIOSLen) -{ - (void)axVal; - (void)BIOSPhysAddr; - (void)copyOfBIOS; - (void)BIOSLen; - return false; -} - -int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh) -{ - p = p; len = len; - return 1; -} - -int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh) -{ - p = p; len = len; - return 1; -} - -int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh) -{ - p = p; len = len; - return 1; -} - -int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh) -{ - p = p; len = len; - return 1; -} - -PM_MODULE PMAPI PM_loadLibrary( - const char *szDLLName) -{ - /* TODO: Implement this to load shared libraries! */ - (void)szDLLName; - return NULL; -} - -void * PMAPI PM_getProcAddress( - PM_MODULE hModule, - const char *szProcName) -{ - /* TODO: Implement this! */ - (void)hModule; - (void)szProcName; - return NULL; -} - -void PMAPI PM_freeLibrary( - PM_MODULE hModule) -{ - /* TODO: Implement this! */ - (void)hModule; -} - -int PMAPI PM_setIOPL( - int level) -{ - /* QNX handles IOPL selection at the program link level. */ - return level; -} - -/**************************************************************************** -PARAMETERS: -base - The starting physical base address of the region -size - The size in bytes of the region -type - Type to place into the MTRR register - -RETURNS: -Error code describing the result. - -REMARKS: -Function to enable write combining for the specified region of memory. -****************************************************************************/ -int PMAPI PM_enableWriteCombine( - ulong base, - ulong size, - uint type) -{ -#ifndef __QNXNTO__ - return MTRR_enableWriteCombine(base,size,type); -#else - return PM_MTRR_NOT_SUPPORTED; -#endif -} diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c deleted file mode 100644 index 579ef2c95c..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c +++ /dev/null @@ -1,49 +0,0 @@ -/**************************************************************************** -* -* SciTech OS Portability Manager Library -* -* ======================================================================== -* -* The contents of this file are subject to the SciTech MGL Public -* License Version 1.0 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.scitechsoft.com/mgl-license.txt -* -* Software distributed under the License is distributed on an -* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -* -* The Initial Developer of the Original Code is SciTech Software, Inc. -* All Rights Reserved. -* -* ======================================================================== -* -* Language: ANSI C -* Environment: Any -* -* Description: Dummy module; no virtual framebuffer for this OS -* -****************************************************************************/ - -#include "pmapi.h" - -ibool PMAPI VF_available(void) -{ - return false; -} - -void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc) -{ - baseAddr = baseAddr; - bankSize = bankSize; - codeLen = codeLen; - bankFunc = bankFunc; - return NULL; -} - -void PMAPI VF_exit(void) -{ -} diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c deleted file mode 100644 index d2740971f9..0000000000 --- a/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c +++ /dev/null @@ -1,91 +0,0 @@ -/**************************************************************************** -* -* Ultra Long Period Timer -* -* ======================================================================== -* -* The contents of this file are subject to the SciTech MGL Public -* License Version 1.0 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.scitechsoft.com/mgl-license.txt -* -* Software distributed under the License is distributed on an -* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -* -* The Initial Developer of the Original Code is SciTech Software, Inc. -* All Rights Reserved. -* -* ======================================================================== -* -* Language: ANSI C -* Environment: QNX -* -* Description: QNX specific implementation for the Zen Timer functions. -* -****************************************************************************/ - -/*----------------------------- Implementation ----------------------------*/ - -/**************************************************************************** -REMARKS: -Initialise the Zen Timer module internals. -****************************************************************************/ -void __ZTimerInit(void) -{ -} - -/**************************************************************************** -REMARKS: -Use the gettimeofday() function to get microsecond precision (probably less -though) -****************************************************************************/ -static ulong __ULZReadTime(void) -{ - struct timespec ts; - clock_gettime(CLOCK_REALTIME, &ts); - return (ts.tv_nsec / 1000 + ts.tv_sec * 1000000); -} - -/**************************************************************************** -REMARKS: -Start the Zen Timer counting. -****************************************************************************/ -#define __LZTimerOn(tm) tm->start.low = __ULZReadTime() - -/**************************************************************************** -REMARKS: -Compute the lap time since the timer was started. -****************************************************************************/ -#define __LZTimerLap(tm) (__ULZReadTime() - tm->start.low) - -/**************************************************************************** -REMARKS: -Call the assembler Zen Timer functions to do the timing. -****************************************************************************/ -#define __LZTimerOff(tm) tm->end.low = __ULZReadTime() - -/**************************************************************************** -REMARKS: -Call the assembler Zen Timer functions to do the timing. -****************************************************************************/ -#define __LZTimerCount(tm) (tm->end.low - tm->start.low) - -/**************************************************************************** -REMARKS: -Define the resolution of the long period timer as microseconds per timer tick. -****************************************************************************/ -#define ULZTIMER_RESOLUTION 1 - -/**************************************************************************** -REMARKS: -Compute the elapsed time from the BIOS timer tick. Note that we check to see -whether a midnight boundary has passed, and if so adjust the finish time to -account for this. We cannot detect if more that one midnight boundary has -passed, so if this happens we will be generating erronous results. -****************************************************************************/ -ulong __ULZElapsedTime(ulong start,ulong finish) -{ return finish - start; } -- cgit v1.2.3