From 9acb626fc145e7327f94fd77f927dce08dd978a8 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 20 Apr 2006 08:42:42 +0200 Subject: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash Add EB+MCF-EV123 board support. Add m68k Boards to MAKEALL Patch from Jens Scharsig, 08 Aug 2005 --- board/BuS/EB+MCF-EV123/flash.c | 413 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 413 insertions(+) create mode 100644 board/BuS/EB+MCF-EV123/flash.c (limited to 'board/BuS/EB+MCF-EV123/flash.c') diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c new file mode 100644 index 00000000000..a5d621c44ae --- /dev/null +++ b/board/BuS/EB+MCF-EV123/flash.c @@ -0,0 +1,413 @@ +/* + * (C) Copyright 2005 + * BuS Elektronik GmbH & Co.KG + * + * Based On + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "cfm_flash.h" + +#define PHYS_FLASH_1 CFG_FLASH_BASE +#define FLASH_BANK_SIZE 0x200000 + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +void flash_print_info (flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (AMD_MANUFACT & FLASH_VENDMASK): + printf ("AMD: "); + switch (info->flash_id & FLASH_TYPEMASK) { + case (AMD_ID_LV160B & FLASH_TYPEMASK): + printf ("AM29LV160B (16Bit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + break; + case FREESCALE_MANUFACT & FLASH_VENDMASK: + cfm_flash_print_info (info); + break; + default: + printf ("Unknown Vendor "); + break; + } + + puts (" Size: "); + if ((info->size >> 20) > 0) + { + printf ("%ld MiB",info->size >> 20); + } + else + { + printf ("%ld KiB",info->size >> 10); + } + printf (" in %d Sectors\n", info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 4) == 0) { + printf ("\n "); + } + printf ("%02d: %08lX%s ", i,info->start[i], + info->protect[i] ? " P" : " "); + } + printf ("\n\n"); +} + +unsigned long flash_init (void) +{ + int i, j; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + switch (i) + { + case 1: + flash_info[i].flash_id = + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV160B & FLASH_TYPEMASK); + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + flashbase = PHYS_FLASH_1; + for (j = 0; j < flash_info[i].sector_count; j++) { + if (j == 0) { + /* 1st is 16 KiB */ + flash_info[i].start[j] = flashbase; + } + if ((j >= 1) && (j <= 2)) { + /* 2nd and 3rd are 8 KiB */ + flash_info[i].start[j] = + flashbase + 0x4000 + 0x2000 * (j - 1); + } + if (j == 3) { + /* 4th is 32 KiB */ + flash_info[i].start[j] = flashbase + 0x8000; + } + if ((j >= 4) && (j <= 34)) { + /* rest is 256 KiB */ + flash_info[i].start[j] = + flashbase + 0x10000 + 0x10000 * (j - 4); + } + } + break; + case 0: + cfm_flash_init (&flash_info[i]); + break; + default: + panic ("configured to many flash banks!\n"); + } + + size += flash_info[i].size; + } + + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + 0xffff, &flash_info[0]); + + return size; +} + +#define CMD_READ_ARRAY 0x00F0 +#define CMD_UNLOCK1 0x00AA +#define CMD_UNLOCK2 0x0055 +#define CMD_ERASE_SETUP 0x0080 +#define CMD_ERASE_CONFIRM 0x0030 +#define CMD_PROGRAM 0x00A0 +#define CMD_UNLOCK_BYPASS 0x0020 + +#define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1))) +#define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1))) + + +#define BIT_ERASE_DONE 0x0080 +#define BIT_RDY_MASK 0x0080 +#define BIT_PROGRAM_ERROR 0x0020 +#define BIT_TIMEOUT 0x80000000 /* our flag */ + +#define ERR_READY -1 + +int amd_flash_erase_sector(flash_info_t * info, int sector) +{ + int state; + ulong result; + + volatile u16 *addr = + (volatile u16 *) (info->start[sector]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + state = 0; + set_timer (0); + + do { + result = *addr; + + /* check timeout */ + if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + state = ERR_TIMOUT; + } + + if (!state && (result & 0xFFFF) & BIT_ERASE_DONE) + state = ERR_READY; + } + while (!state); + if (state == ERR_READY) + state = ERR_OK; + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + return state; +} + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int iflag, cflag; + int sector; + int rc; + + rc = ERR_OK; + + if (info->flash_id == FLASH_UNKNOWN) + { + rc = ERR_UNKNOWN_FLASH_TYPE; + } /* (info->flash_id == FLASH_UNKNOWN) */ + + if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count) + { + rc = ERR_INVAL; + } + + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) { + + if (info->protect[sector]) + { + putc('P'); /* protected sector will not erase */ + } + else + { + /* erase on unprotected sector */ + puts("E\b"); + switch (info->flash_id & FLASH_VENDMASK) + { + case (AMD_MANUFACT & FLASH_VENDMASK): + rc = amd_flash_erase_sector(info,sector); + break; + case (FREESCALE_MANUFACT & FLASH_VENDMASK): + rc = cfm_flash_erase_sector(info,sector); + break; + default: + return ERR_UNKNOWN_FLASH_VENDOR; + } + putc('.'); + } + } + if (rc!=ERR_OK) + { + printf ("\n "); + flash_perror (rc); + } + else + { + printf (" done\n"); + } + + udelay (10000); /* allow flash to settle - wait 10 ms */ + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return rc; +} + +volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data) +{ + volatile u16 *addr; + ulong result; + int cflag, iflag; + int state; + + /* + * Check if Flash is (sufficiently) erased + */ + addr = (volatile u16 *) dest; + + result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_PROGRAM; + *addr = data; + + /* arm simple, non interrupt dependent timer */ + set_timer (0); + + /* wait until flash is ready */ + state = 0; + do { + result = *addr; + + /* check timeout */ + if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { + state = ERR_TIMOUT; + } + if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK))) + state = ERR_READY; + + } while (!state); + + *addr = CMD_READ_ARRAY; + + if (state == ERR_READY) + state = ERR_OK; + if ((*addr != data) && (state != ERR_TIMOUT)) + state = ERR_PROG_ERROR; + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return state; +} + +int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + int rc; + ulong dest; + u16 data; + + rc = ERR_OK; + if (addr & 1) + { + debug ("Byte alignment not supported\n"); + rc = ERR_ALIGN; + } + if (cnt & 1) + { + debug ("Byte transfer not supported\n"); + rc = ERR_ALIGN; + } + + dest = addr; + while ((cnt>=2) && (rc == ERR_OK)) + { + data =*((volatile u16 *) src); + rc=amd_write_word (info,dest,data); + src +=2; + dest +=2; + cnt -=2; + } + return rc; +} + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + int rc; + + switch (info->flash_id & FLASH_VENDMASK) + { + case (AMD_MANUFACT & FLASH_VENDMASK): + rc = amd_flash_write_buff(info,src,addr,cnt); + break; + case (FREESCALE_MANUFACT & FLASH_VENDMASK): + rc = cfm_flash_write_buff(info,src,addr,cnt); + break; + default: + rc = ERR_UNKNOWN_FLASH_VENDOR; + } + return rc; + +} +int amd_flash_protect(flash_info_t * info,long sector,int prot) +{ + int rc; + rc= ERR_OK; + if (prot) + { + info->protect[sector]=1; + } + else + { + info->protect[sector]=0; + } + return rc; +} + +#ifdef CFG_FLASH_PROTECTION + +int flash_real_protect(flash_info_t * info,long sector,int prot) +{ + int rc; + + switch (info->flash_id & FLASH_VENDMASK) + { + case (AMD_MANUFACT & FLASH_VENDMASK): + rc = amd_flash_protect(info,sector,prot); + break; + case (FREESCALE_MANUFACT & FLASH_VENDMASK): + rc = cfm_flash_protect(info,sector,prot); + break; + default: + rc = ERR_UNKNOWN_FLASH_VENDOR; + } + return rc; +} + +#endif -- cgit v1.2.3