From 7aa1f198c897e48a011f9f0dca6b3088bc474236 Mon Sep 17 00:00:00 2001 From: Shinya Kuribayashi Date: Sat, 7 May 2011 00:18:13 +0900 Subject: MIPS: Coding style cleanups on common assembly files Fix style issues and alignments globally. No logical changes. - Replace C comments with AS line comments where possible - Use ifndef where possible, rather than if !defined for simplicity - An instruction executed in a delay slot is now indicated by a leading space, not by C comment Signed-off-by: Shinya Kuribayashi --- arch/mips/cpu/mips32/cache.S | 81 ++++++++++++++--------------- arch/mips/cpu/mips32/start.S | 119 ++++++++++++++++++++----------------------- 2 files changed, 93 insertions(+), 107 deletions(-) (limited to 'arch') diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/cpu/mips32/cache.S index edc0674b24..5ce0ec45fc 100644 --- a/arch/mips/cpu/mips32/cache.S +++ b/arch/mips/cpu/mips32/cache.S @@ -76,8 +76,8 @@ * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz) */ LEAF(mips_init_icache) - blez a1, 9f - mtc0 zero, CP0_TAGLO + blez a1, 9f + mtc0 zero, CP0_TAGLO /* clear tag to invalidate */ PTR_LI t0, INDEX_BASE PTR_ADDU t1, t0, a1 @@ -94,15 +94,15 @@ LEAF(mips_init_icache) 1: cache_op Index_Store_Tag_I t0 PTR_ADDU t0, a2 bne t0, t1, 1b -9: jr ra +9: jr ra END(mips_init_icache) /* * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz) */ LEAF(mips_init_dcache) - blez a1, 9f - mtc0 zero, CP0_TAGLO + blez a1, 9f + mtc0 zero, CP0_TAGLO /* clear all tags */ PTR_LI t0, INDEX_BASE PTR_ADDU t1, t0, a1 @@ -119,25 +119,23 @@ LEAF(mips_init_dcache) 1: cache_op Index_Store_Tag_D t0 PTR_ADDU t0, a2 bne t0, t1, 1b -9: jr ra +9: jr ra END(mips_init_dcache) -/******************************************************************************* -* -* mips_cache_reset - low level initialisation of the primary caches -* -* This routine initialises the primary caches to ensure that they -* have good parity. It must be called by the ROM before any cached locations -* are used to prevent the possibility of data with bad parity being written to -* memory. -* To initialise the instruction cache it is essential that a source of data -* with good parity is available. This routine -* will initialise an area of memory starting at location zero to be used as -* a source of parity. -* -* RETURNS: N/A -* -*/ +/* + * mips_cache_reset - low level initialisation of the primary caches + * + * This routine initialises the primary caches to ensure that they have good + * parity. It must be called by the ROM before any cached locations are used + * to prevent the possibility of data with bad parity being written to memory. + * + * To initialise the instruction cache it is essential that a source of data + * with good parity is available. This routine will initialise an area of + * memory starting at location zero to be used as a source of parity. + * + * RETURNS: N/A + * + */ NESTED(mips_cache_reset, 0, ra) move RA, ra li t2, CONFIG_SYS_ICACHE_SIZE @@ -185,13 +183,12 @@ NESTED(mips_cache_reset, 0, ra) jr RA END(mips_cache_reset) -/******************************************************************************* -* -* dcache_status - get cache status -* -* RETURNS: 0 - cache disabled; 1 - cache enabled -* -*/ +/* + * dcache_status - get cache status + * + * RETURNS: 0 - cache disabled; 1 - cache enabled + * + */ LEAF(dcache_status) mfc0 t0, CP0_CONFIG li t1, CONF_CM_UNCACHED @@ -202,13 +199,12 @@ LEAF(dcache_status) 2: jr ra END(dcache_status) -/******************************************************************************* -* -* dcache_disable - disable cache -* -* RETURNS: N/A -* -*/ +/* + * dcache_disable - disable cache + * + * RETURNS: N/A + * + */ LEAF(dcache_disable) mfc0 t0, CP0_CONFIG li t1, -8 @@ -218,13 +214,12 @@ LEAF(dcache_disable) jr ra END(dcache_disable) -/******************************************************************************* -* -* dcache_enable - enable cache -* -* RETURNS: N/A -* -*/ +/* + * dcache_enable - enable cache + * + * RETURNS: N/A + * + */ LEAF(dcache_enable) mfc0 t0, CP0_CONFIG ori t0, CONF_CM_CMASK diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S index 0a9d9d596c..5d7467d02a 100644 --- a/arch/mips/cpu/mips32/start.S +++ b/arch/mips/cpu/mips32/start.S @@ -62,11 +62,11 @@ .globl _start .text _start: - RVECENT(reset,0) /* U-boot entry point */ - RVECENT(reset,1) /* software reboot */ -#if defined(CONFIG_INCA_IP) - .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */ - .word 0x00000000 /* phase of the flash */ + RVECENT(reset,0) # U-boot entry point + RVECENT(reset,1) # software reboot +#ifdef CONFIG_INCA_IP + .word INFINEON_EBU_BOOTCFG # EBU init code, fetched during + .word 0x00000000 # booting phase of the flash #else RVECENT(romReserved,2) #endif @@ -131,7 +131,7 @@ _start: RVECENT(romReserved,61) RVECENT(romReserved,62) RVECENT(romReserved,63) - XVECENT(romExcHandle,0x200) /* bfc00200: R4000 tlbmiss vector */ + XVECENT(romExcHandle,0x200) # bfc00200: R4000 tlbmiss vector RVECENT(romReserved,65) RVECENT(romReserved,66) RVECENT(romReserved,67) @@ -147,7 +147,7 @@ _start: RVECENT(romReserved,77) RVECENT(romReserved,78) RVECENT(romReserved,79) - XVECENT(romExcHandle,0x280) /* bfc00280: R4000 xtlbmiss vector */ + XVECENT(romExcHandle,0x280) # bfc00280: R4000 xtlbmiss vector RVECENT(romReserved,81) RVECENT(romReserved,82) RVECENT(romReserved,83) @@ -163,7 +163,7 @@ _start: RVECENT(romReserved,93) RVECENT(romReserved,94) RVECENT(romReserved,95) - XVECENT(romExcHandle,0x300) /* bfc00300: R4000 cache vector */ + XVECENT(romExcHandle,0x300) # bfc00300: R4000 cache vector RVECENT(romReserved,97) RVECENT(romReserved,98) RVECENT(romReserved,99) @@ -179,7 +179,7 @@ _start: RVECENT(romReserved,109) RVECENT(romReserved,110) RVECENT(romReserved,111) - XVECENT(romExcHandle,0x380) /* bfc00380: R4000 general vector */ + XVECENT(romExcHandle,0x380) # bfc00380: R4000 general vector RVECENT(romReserved,113) RVECENT(romReserved,114) RVECENT(romReserved,115) @@ -196,19 +196,19 @@ _start: RVECENT(romReserved,126) RVECENT(romReserved,127) - /* We hope there are no more reserved vectors! + /* + * We hope there are no more reserved vectors! * 128 * 8 == 1024 == 0x400 * so this is address R_VEC+0x400 == 0xbfc00400 */ .align 4 reset: - /* Clear watch registers. - */ + /* Clear watch registers */ mtc0 zero, CP0_WATCHLO mtc0 zero, CP0_WATCHHI - /* WP(Watch Pending), SW0/1 should be cleared. */ + /* WP(Watch Pending), SW0/1 should be cleared */ mtc0 zero, CP0_CAUSE setup_c0_status_reset @@ -217,47 +217,42 @@ reset: mtc0 zero, CP0_COUNT mtc0 zero, CP0_COMPARE -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* CONFIG0 register */ li t0, CONF_CM_UNCACHED mtc0 t0, CP0_CONFIG -#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */ +#endif - /* Initialize $gp. - */ + /* Initialize $gp */ bal 1f - nop + nop .word _gp 1: lw gp, 0(ra) -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) - /* Initialize any external memory. - */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + /* Initialize any external memory */ la t9, lowlevel_init jalr t9 - nop + nop - /* Initialize caches... - */ + /* Initialize caches... */ la t9, mips_cache_reset jalr t9 - nop + nop - /* ... and enable them. - */ + /* ... and enable them */ li t0, CONF_CM_CACHABLE_NONCOHERENT mtc0 t0, CP0_CONFIG -#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */ +#endif - /* Set up temporary stack. - */ + /* Set up temporary stack */ li t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET la sp, 0(t0) la t9, board_init_f jr t9 - nop + nop /* * void relocate_code (addr_sp, gd, addr_moni) @@ -272,13 +267,13 @@ reset: .globl relocate_code .ent relocate_code relocate_code: - move sp, a0 /* Set new stack pointer */ + move sp, a0 # set new stack pointer li t0, CONFIG_SYS_MONITOR_BASE la t3, in_ram - lw t2, -12(t3) /* t2 <-- uboot_end_data */ + lw t2, -12(t3) # t2 <-- uboot_end_data move t1, a2 - move s2, a2 /* s2 <-- destination address */ + move s2, a2 # s2 <-- destination address /* * Fix $gp: @@ -287,8 +282,8 @@ relocate_code: */ move t6, gp sub gp, CONFIG_SYS_MONITOR_BASE - add gp, a2 /* gp now adjusted */ - sub s1, gp, t6 /* s1 <-- relocation offset */ + add gp, a2 # gp now adjusted + sub s1, gp, t6 # s1 <-- relocation offset /* * t0 = source address @@ -299,30 +294,28 @@ relocate_code: /* * Save destination address and size for later usage in flush_cache() */ - move s0, a1 /* save gd in s0 */ - move a0, t1 /* a0 <-- destination addr */ - sub a1, t2, t0 /* a1 <-- size */ + move s0, a1 # save gd in s0 + move a0, t1 # a0 <-- destination addr + sub a1, t2, t0 # a1 <-- size 1: lw t3, 0(t0) sw t3, 0(t1) addu t0, 4 ble t0, t2, 1b - addu t1, 4 /* delay slot */ + addu t1, 4 - /* If caches were enabled, we would have to flush them here. - */ + /* If caches were enabled, we would have to flush them here. */ /* a0 & a1 are already set up for flush_cache(start, size) */ la t9, flush_cache jalr t9 - nop + nop - /* Jump to where we've relocated ourselves. - */ + /* Jump to where we've relocated ourselves */ addi t0, s2, in_ram - _start jr t0 - nop + nop .word _gp .word _GLOBAL_OFFSET_TABLE_ @@ -337,45 +330,43 @@ in_ram: * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object * generated by GNU ld. Skip these reserved entries from relocation. */ - lw t3, -4(t0) /* t3 <-- num_got_entries */ - lw t4, -16(t0) /* t4 <-- _GLOBAL_OFFSET_TABLE_ */ - lw t5, -20(t0) /* t5 <-- _gp */ - sub t4, t5 /* compute offset*/ - add t4, t4, gp /* t4 now holds relocated _GLOBAL_OFFSET_TABLE_ */ - addi t4, t4, 8 /* Skipping first two entries. */ + lw t3, -4(t0) # t3 <-- num_got_entries + lw t4, -16(t0) # t4 <-- _GLOBAL_OFFSET_TABLE_ + lw t5, -20(t0) # t5 <-- _gp + sub t4, t5 # compute offset + add t4, t4, gp # t4 now holds relocated _G_O_T_ + addi t4, t4, 8 # skipping first two entries li t2, 2 1: lw t1, 0(t4) beqz t1, 2f - add t1, s1 + add t1, s1 sw t1, 0(t4) 2: addi t2, 1 blt t2, t3, 1b - addi t4, 4 /* delay slot */ + addi t4, 4 - /* Clear BSS. - */ - lw t1, -12(t0) /* t1 <-- uboot_end_data */ - lw t2, -8(t0) /* t2 <-- uboot_end */ - add t1, s1 /* adjust pointers */ + /* Clear BSS */ + lw t1, -12(t0) # t1 <-- uboot_end_data + lw t2, -8(t0) # t2 <-- uboot_end + add t1, s1 # adjust pointers add t2, s1 sub t1, 4 1: addi t1, 4 bltl t1, t2, 1b - sw zero, 0(t1) /* delay slot */ + sw zero, 0(t1) - move a0, s0 /* a0 <-- gd */ + move a0, s0 # a0 <-- gd la t9, board_init_r jr t9 - move a1, s2 /* delay slot */ + move a1, s2 .end relocate_code - /* Exception handlers. - */ + /* Exception handlers */ romReserved: b romReserved -- cgit v1.2.3