From 14d319b1856b86e593e01abd0a1e3c2d63b52a8a Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Thu, 23 May 2019 14:11:30 -0500 Subject: spl: imx6: Let spl_boot_device return USDHC1 or USDHC2 Currently, when the spl_boot_device checks the boot device, it will only return MMC1 when it's either sd or eMMC regardless of whether or not it's MMC1 or MMC2. This is a problem when booting from MMC2 if MMC isn't being manually configured like in the DM_SPL case with SPL_OF_CONTROL. This patch will check the register and return either MMC1 or MMC2. Signed-off-by: Adam Ford --- arch/arm/mach-imx/spl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-imx/spl.c') diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c index 9f1e0f6a72..1f230aca33 100644 --- a/arch/arm/mach-imx/spl.c +++ b/arch/arm/mach-imx/spl.c @@ -24,6 +24,7 @@ u32 spl_boot_device(void) { unsigned int bmode = readl(&src_base->sbmr2); u32 reg = imx6_src_get_boot_mode(); + u32 mmc_index = ((reg >> 11) & 0x03); /* * Check for BMODE if serial downloader is enabled @@ -84,11 +85,12 @@ u32 spl_boot_device(void) /* SD/eSD: 8.5.3, Table 8-15 */ case IMX6_BMODE_SD: case IMX6_BMODE_ESD: - return BOOT_DEVICE_MMC1; - /* MMC/eMMC: 8.5.3 */ case IMX6_BMODE_MMC: case IMX6_BMODE_EMMC: - return BOOT_DEVICE_MMC1; + if (mmc_index == 1) + return BOOT_DEVICE_MMC2; + else + return BOOT_DEVICE_MMC1; /* NAND Flash: 8.5.2, Table 8-10 */ case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX: return BOOT_DEVICE_NAND; -- cgit v1.2.3