From fe1378a961e508b31b1f29a2bb08ba1dac063155 Mon Sep 17 00:00:00 2001 From: Jeroen Hofstee Date: Sat, 21 Sep 2013 14:04:41 +0200 Subject: ARM: use r9 for gd To be more EABI compliant and as a preparation for building with clang, use the platform-specific r9 register for gd instead of r8. note: The FIQ is not updated since it is not used in u-boot, and under discussion for the time being. The following checkpatch warning is ignored: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt Signed-off-by: Jeroen Hofstee cc: Albert ARIBAUD --- arch/arm/lib/crt0.S | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm/lib/crt0.S') diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 960d12e7327..ac54b9359ae 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -69,7 +69,7 @@ ENTRY(_main) bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ sub sp, #GD_SIZE /* allocate one GD above SP */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - mov r8, sp /* GD is above SP */ + mov r9, sp /* GD is above SP */ mov r0, #0 bl board_init_f @@ -81,15 +81,15 @@ ENTRY(_main) * 'here' but relocated. */ - ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */ + ldr sp, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r8, [r8, #GD_BD] /* r8 = gd->bd */ - sub r8, r8, #GD_SIZE /* new GD is below bd */ + ldr r9, [r9, #GD_BD] /* r9 = gd->bd */ + sub r9, r9, #GD_SIZE /* new GD is below bd */ adr lr, here - ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */ + ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */ add lr, lr, r0 - ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */ + ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */ b relocate_code here: @@ -111,8 +111,8 @@ clbss_l:cmp r0, r1 /* while not at end of BSS */ bl red_led_on /* call board_init_r(gd_t *id, ulong dest_addr) */ - mov r0, r8 /* gd_t */ - ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */ + mov r0, r9 /* gd_t */ + ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */ /* call board_init_r */ ldr pc, =board_init_r /* this is auto-relocated! */ -- cgit v1.2.3