From f0a3f3492ac197ea89be58a29aed7500aad5542d Mon Sep 17 00:00:00 2001
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Tue, 31 Jan 2017 09:32:57 +0530
Subject: ARM: dts: k2*: Rename the k2* files to keystone-k2* files

As reported in [1], rename the k2* dts files to keystone-* files
this will force consistency throughout.

Script for the same (and hand modified for Makefile and config
files):
for i in arch/arm/dts/k2*
do
	b=`basename $i`;
	git mv $i arch/arm/dts/keystone-$b;
	sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si]
done

This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename
the k2* files to keystone-k2* files")

[1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/dts/keystone-k2e-evm.dts | 155 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 155 insertions(+)
 create mode 100644 arch/arm/dts/keystone-k2e-evm.dts

(limited to 'arch/arm/dts/keystone-k2e-evm.dts')

diff --git a/arch/arm/dts/keystone-k2e-evm.dts b/arch/arm/dts/keystone-k2e-evm.dts
new file mode 100644
index 0000000000..3be8b53252
--- /dev/null
+++ b/arch/arm/dts/keystone-k2e-evm.dts
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2e.dtsi"
+
+/ {
+	compatible =  "ti,k2e-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison EVM";
+
+	soc {
+
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11", "spi-flash";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	status = "ok";
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
-- 
cgit v1.2.3