From 721ae657a8025a9c579b4298d117e45dfa313e25 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Thu, 11 Oct 2012 10:30:56 +0800 Subject: ENGR00229789 AHCI Disable SATA PHY in initialization * disable SATA PHY in default * add sata_initialize() func used to re-initialize SATA when sata is used. Signed-off-by: Richard Zhu --- board/freescale/mx6q_arm2/mx6q_arm2.c | 66 ++++++++++++++++++++++++ board/freescale/mx6q_sabreauto/mx6q_sabreauto.c | 66 ++++++++++++++++++++++++ board/freescale/mx6q_sabresd/mx6q_sabresd.c | 67 +++++++++++++++++++++++++ 3 files changed, 199 insertions(+) diff --git a/board/freescale/mx6q_arm2/mx6q_arm2.c b/board/freescale/mx6q_arm2/mx6q_arm2.c index 17ab35a7061..953a6c05fc6 100644 --- a/board/freescale/mx6q_arm2/mx6q_arm2.c +++ b/board/freescale/mx6q_arm2/mx6q_arm2.c @@ -72,6 +72,10 @@ #include #endif +#ifdef CONFIG_DWC_AHSATA +#include +#endif + DECLARE_GLOBAL_DATA_PTR; static u32 system_rev; @@ -81,6 +85,7 @@ static enum boot_device boot_dev; extern unsigned char fsl_bmp_600x400[]; extern int fsl_bmp_600x400_size; extern int g_ipu_hw_rev; +extern int sata_curr_device; #if defined(CONFIG_BMP_8BPP) unsigned short colormap[256]; @@ -240,6 +245,60 @@ void board_mmu_init(void) #define ANATOP_PLL_HOLD_RING_OFF_MASK 0x00000800 #define ANATOP_SATA_CLK_ENABLE_MASK 0x00100000 +/* Staggered Spin-up */ +#define HOST_CAP_SSS (1 << 27) +/* host version register*/ +#define HOST_VERSIONR 0xfc +#define PORT_SATA_SR 0x128 +#define PORT_PHY_CTL 0x178 +#define PORT_PHY_CTL_PDDQ_LOC 0x100000 + +int sata_initialize(void) +{ + u32 reg = 0; + u32 iterations = 1000000; + + if (sata_curr_device == -1) { + /* Make sure that the PDDQ mode is disabled. */ + reg = readl(SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + writel(reg & (~PORT_PHY_CTL_PDDQ_LOC), + SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + + /* Reset HBA */ + writel(HOST_RESET, SATA_ARB_BASE_ADDR + HOST_CTL); + + reg = 0; + while (readl(SATA_ARB_BASE_ADDR + HOST_VERSIONR) == 0) { + reg++; + if (reg > 1000000) + break; + } + + reg = readl(SATA_ARB_BASE_ADDR + HOST_CAP); + if (!(reg & HOST_CAP_SSS)) { + reg |= HOST_CAP_SSS; + writel(reg, SATA_ARB_BASE_ADDR + HOST_CAP); + } + + reg = readl(SATA_ARB_BASE_ADDR + HOST_PORTS_IMPL); + if (!(reg & 0x1)) + writel((reg | 0x1), + SATA_ARB_BASE_ADDR + HOST_PORTS_IMPL); + + /* Release resources when there is no device on the port */ + do { + reg = readl(SATA_ARB_BASE_ADDR + PORT_SATA_SR) & 0xF; + if ((reg & 0xF) == 0) + iterations--; + else + break; + + } while (iterations > 0); + } + + return __sata_initialize(); +} + int setup_sata(void) { u32 reg = 0; @@ -284,6 +343,13 @@ int setup_sata(void) reg |= 0x59124c6; writel(reg, IOMUXC_BASE_ADDR + 0x34); + if (sata_curr_device == -1) { + /* Enable PDDQ mode in default if there isn't sata boot */ + reg = readl(SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + writel(reg | PORT_PHY_CTL_PDDQ_LOC, + SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + } + return 0; } #endif diff --git a/board/freescale/mx6q_sabreauto/mx6q_sabreauto.c b/board/freescale/mx6q_sabreauto/mx6q_sabreauto.c index 8dec1d2af97..aeaf9087a69 100644 --- a/board/freescale/mx6q_sabreauto/mx6q_sabreauto.c +++ b/board/freescale/mx6q_sabreauto/mx6q_sabreauto.c @@ -67,6 +67,10 @@ #include #endif +#ifdef CONFIG_DWC_AHSATA +#include +#endif + #define I2C_EXP_RST IMX_GPIO_NR(1, 15) #define I2C3_STEER IMX_GPIO_NR(5, 4) @@ -78,6 +82,7 @@ static enum boot_device boot_dev; extern unsigned char fsl_bmp_600x400[]; extern int fsl_bmp_600x400_size; extern int g_ipu_hw_rev; +extern int sata_curr_device; #if defined(CONFIG_BMP_8BPP) unsigned short colormap[256]; @@ -213,6 +218,60 @@ void board_mmu_init(void) #define ANATOP_PLL_HOLD_RING_OFF_MASK 0x00000800 #define ANATOP_SATA_CLK_ENABLE_MASK 0x00100000 +/* Staggered Spin-up */ +#define HOST_CAP_SSS (1 << 27) +/* host version register*/ +#define HOST_VERSIONR 0xfc +#define PORT_SATA_SR 0x128 +#define PORT_PHY_CTL 0x178 +#define PORT_PHY_CTL_PDDQ_LOC 0x100000 + +int sata_initialize(void) +{ + u32 reg = 0; + u32 iterations = 1000000; + + if (sata_curr_device == -1) { + /* Make sure that the PDDQ mode is disabled. */ + reg = readl(SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + writel(reg & (~PORT_PHY_CTL_PDDQ_LOC), + SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + + /* Reset HBA */ + writel(HOST_RESET, SATA_ARB_BASE_ADDR + HOST_CTL); + + reg = 0; + while (readl(SATA_ARB_BASE_ADDR + HOST_VERSIONR) == 0) { + reg++; + if (reg > 1000000) + break; + } + + reg = readl(SATA_ARB_BASE_ADDR + HOST_CAP); + if (!(reg & HOST_CAP_SSS)) { + reg |= HOST_CAP_SSS; + writel(reg, SATA_ARB_BASE_ADDR + HOST_CAP); + } + + reg = readl(SATA_ARB_BASE_ADDR + HOST_PORTS_IMPL); + if (!(reg & 0x1)) + writel((reg | 0x1), + SATA_ARB_BASE_ADDR + HOST_PORTS_IMPL); + + /* Release resources when there is no device on the port */ + do { + reg = readl(SATA_ARB_BASE_ADDR + PORT_SATA_SR) & 0xF; + if ((reg & 0xF) == 0) + iterations--; + else + break; + + } while (iterations > 0); + } + + return __sata_initialize(); +} + int setup_sata(void) { u32 reg = 0; @@ -257,6 +316,13 @@ int setup_sata(void) reg |= 0x59124c6; writel(reg, IOMUXC_BASE_ADDR + 0x34); + if (sata_curr_device == -1) { + /* Enable PDDQ mode in default if there isn't sata boot */ + reg = readl(SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + writel(reg | PORT_PHY_CTL_PDDQ_LOC, + SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + } + return 0; } #endif diff --git a/board/freescale/mx6q_sabresd/mx6q_sabresd.c b/board/freescale/mx6q_sabresd/mx6q_sabresd.c index 165e9bfb141..2a82329fca9 100644 --- a/board/freescale/mx6q_sabresd/mx6q_sabresd.c +++ b/board/freescale/mx6q_sabresd/mx6q_sabresd.c @@ -79,6 +79,11 @@ #ifdef CONFIG_ANDROID_RECOVERY #include #endif + +#ifdef CONFIG_DWC_AHSATA +#include +#endif + DECLARE_GLOBAL_DATA_PTR; static enum boot_device boot_dev; @@ -91,6 +96,7 @@ static enum boot_device boot_dev; extern unsigned char fsl_bmp_reversed_600x400[]; extern int fsl_bmp_reversed_600x400_size; extern int g_ipu_hw_rev; +extern int sata_curr_device; #if defined(CONFIG_BMP_8BPP) unsigned short colormap[256]; @@ -232,6 +238,60 @@ void board_mmu_init(void) #define ANATOP_PLL_HOLD_RING_OFF_MASK 0x00000800 #define ANATOP_SATA_CLK_ENABLE_MASK 0x00100000 +/* Staggered Spin-up */ +#define HOST_CAP_SSS (1 << 27) +/* host version register*/ +#define HOST_VERSIONR 0xfc +#define PORT_SATA_SR 0x128 +#define PORT_PHY_CTL 0x178 +#define PORT_PHY_CTL_PDDQ_LOC 0x100000 + +int sata_initialize(void) +{ + u32 reg = 0; + u32 iterations = 1000000; + + if (sata_curr_device == -1) { + /* Make sure that the PDDQ mode is disabled. */ + reg = readl(SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + writel(reg & (~PORT_PHY_CTL_PDDQ_LOC), + SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + + /* Reset HBA */ + writel(HOST_RESET, SATA_ARB_BASE_ADDR + HOST_CTL); + + reg = 0; + while (readl(SATA_ARB_BASE_ADDR + HOST_VERSIONR) == 0) { + reg++; + if (reg > 1000000) + break; + } + + reg = readl(SATA_ARB_BASE_ADDR + HOST_CAP); + if (!(reg & HOST_CAP_SSS)) { + reg |= HOST_CAP_SSS; + writel(reg, SATA_ARB_BASE_ADDR + HOST_CAP); + } + + reg = readl(SATA_ARB_BASE_ADDR + HOST_PORTS_IMPL); + if (!(reg & 0x1)) + writel((reg | 0x1), + SATA_ARB_BASE_ADDR + HOST_PORTS_IMPL); + + /* Release resources when there is no device on the port */ + do { + reg = readl(SATA_ARB_BASE_ADDR + PORT_SATA_SR) & 0xF; + if ((reg & 0xF) == 0) + iterations--; + else + break; + + } while (iterations > 0); + } + + return __sata_initialize(); +} + int setup_sata(void) { u32 reg = 0; @@ -276,6 +336,13 @@ int setup_sata(void) reg |= 0x59124c6; writel(reg, IOMUXC_BASE_ADDR + 0x34); + if (sata_curr_device == -1) { + /* Enable PDDQ mode in default if there isn't sata boot */ + reg = readl(SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + writel(reg | PORT_PHY_CTL_PDDQ_LOC, + SATA_ARB_BASE_ADDR + PORT_PHY_CTL); + } + return 0; } #endif -- cgit v1.2.3