From 15b8c7505819fa48dd99fb51e91b9536f341fde1 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Mon, 25 Feb 2019 21:53:46 -0600 Subject: davinci: da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full In order to fully support SPL_OF_CONTROL, we need BSS to be a bit larger. This patch relocates BSS to SDRAM instead of SRAM which is similar to how ARMv7 boards (like OMAP2+) do it. This means two new variables are required: CONFIG_SPL_BSS_START_ADDR set to DAVINCI_DDR_EMIF_DATA_BASE CONFIG_SPL_BSS_MAX_SIZE is set to 0x1080000 which is 1 byte before the location where U-Boot will load. Signed-off-by: Adam Ford --- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 21 +++++++++++++-------- include/configs/da850evm.h | 3 ++- include/configs/omapl138_lcdk.h | 3 +++ 3 files changed, 18 insertions(+), 9 deletions(-) diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index 7b5fab7756..8f04911306 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -10,6 +10,9 @@ MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\ LENGTH = CONFIG_SPL_MAX_FOOTPRINT } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) ENTRY(_start) @@ -42,6 +45,15 @@ SECTIONS __rel_dyn_end = .; } >.sram + __image_copy_end = .; + + .end : + { + *(.__end) + } + + _image_binary_end = .; + .bss : { . = ALIGN(4); @@ -49,12 +61,5 @@ SECTIONS *(.bss*) . = ALIGN(4); __bss_end = .; - } >.sram - - __image_copy_end = .; - - .end : - { - *(.__end) - } + } >.sdram } diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 583f994807..94848f5128 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -48,7 +48,8 @@ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - +#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE +#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000 /* memtest start addr */ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 1786e099ad..6680c3e503 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -43,6 +43,9 @@ #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ +#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE +#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000 + /* memtest start addr */ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) -- cgit v1.2.3