summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2016-01-28test/py: make net test aware of USB and PCI enumerationStephen Warren
The existing net test executes a list of commands supplied by boardenv variable env__net_pre_commands. The idea was that boardenv would know whether the Ethernet device was attached to USB, PCI, ... and hence was the best place to put any commands required to probe the device. However, this approach doesn't scale well when attempting to use a single boardenv across multiple branches of U-Boot, some of which require "pci enum" to enumerate PCI and others of which don't, or don't /yet/ simply because various upstream changes haven't been merged down. This patch updates the test to require that the boardenv state which HW features are required for Ethernet to work, and lets the test itself map that knowledge to the set of commands to execute. Since this mapping is part of the test script, which is part of the U-Boot code/branch, this approach is more scalable. It also feels cleaner, since again boardenv is only providing data, rather than test logic. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: dfu: error out if USB device already existsStephen Warren
The DFU test requests U-Boot configure its USB controller in device mode, then waits for the host machine to enumerate the USB device and create a device node for it. However, this wait can be fooled if the USB device node already exists before the test starts, e.g. if some previous software stack already configured the USB controller into device mode and never de-configured it. This "previous software stack" could even be another test/py test, if U-Boot's own USB teardown does not operate correctly. If this happens, dfu-util may be run before U-Boot is ready to serve DFU commands, which may cause false test failures. Enhance the dfu test to fail if the device node exists before it is expected to. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: make crash detection more robustStephen Warren
test/py contains logic to detect the target crashing and rebooting by searching the console output for a U-Boot signon message, which will presumably be emitted when the system boots after the crash/reset. Currently, this logic only searches for the exact signon message that was printed by the U-Boot version under test, upon the assumption that binary is written into flash, and hence will be the version booted after any reset. However, this is not a valid assumption; some test setups download the U-Boot-under-test into RAM and boot it from there, and in such a scenario an arbitrary U-Boot version may be located in flash and hence run after any reset. Fix the reset detection logic to match any U-Boot signon message. This prevents false negatives. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: add a networking testStephen Warren
This tests: - dhcp (if indicated by boardenv file). - Static IP network setup (if provided by boardenv file). - Ping. - TFTP get. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: move find_ram_base() into u_boot_utilsStephen Warren
find_ram_base() is a shared utility function, not a core part of the U-Boot console interaction. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: add DFU testStephen Warren
Add a test of DFU functionality to the Python test suite. The test starts DFU in U-Boot, waits for USB device enumeration on the host, executes dfu-util multiple times to test various transfer sizes, many of which trigger USB driver edge cases, and finally aborts the DFU command in U-Boot. This test mirrors the functionality previously available via the shell scripts in test/dfu, and hence those are removed too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: ums: add filesystem-based testingStephen Warren
Enhance the UMS test to optionally mount a partition and read/write a file to it, validating that the content written and read back are identical. This enhancement is backwards-compatible; old boardenv contents that don't define the new configuration data will cause the test code to perform as before. test/ums/ is deleted since the Python test now performs the same testing that it did. The code is also re-written to make use of the recently added utility module, and split it up into nested functions so the overall logic of the test process can be followed more easily without the details cluttering the code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: add various utility codeStephen Warren
Add various common utility functions. These will be used by a forthcoming re-written UMS test, and a brand-new DFU test. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: optionally ignore errors from shell commandsStephen Warren
Sometimes it's useful to run shell commands and ignore any errors. One example might be cleanup logic; if a test-case experiences an error, the cleanup logic might experience an error too, and we don't want that error to mask the original error, so we want to ignore the subsequent error. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: log when tests send CTRL-CStephen Warren
Write a note to the log file when a test sends CTRL-C to U-Boot. This makes it easier to follow what's happening in the logs, especially since U-Boot doesn't echo the character back to its output, so there's no other signal of what's going on. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: drain console log at the end of any failed testStephen Warren
Tests may fail for a number of reasons, and in particular for reasons other than a timeout waiting for U-Boot to print expected data. If the last operation that a failed test performs is not waiting for U-Boot to print something, then any trailing output from U-Boot during that test's operation will not be logged as part of that test, but rather either along with the next test, or even thrown away, potentiall hiding clues re: the test failure reason. Solve this by explicitly draining (and hence logging) the U-Boot output in the case of failed tests. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: move U-Boot respawn trigger to the test coreStephen Warren
Prior to this change, U-Boot was lazilly (re-)spawned if/when a test attempted to interact with it, and no active connection existed. This approach was simple, yet had the disadvantage that U-Boot might be spawned in the middle of a test function, e.g. after the test had already performed actions such as creating data files, etc. In that case, this could cause the log to contain the sequence (1) some test logs, (2) U-Boot's boot process, (3) the rest of that test's logs. This isn't optimally readable. This issue will affect the upcoming DFU and enhanced UMS tests. This change converts u_boot_console to be a function-scoped fixture, so that pytest attempts to re-create the object for each test invocation. This allows the fixture factory function to ensure that U-Boot is spawned prior to every test. In practice, the same object is returned each time so there is essentially no additional overhead due to this change. This allows us to remove: - The explicit ensure_spawned() call from test_sleep, since the core now ensures that the spawn happens before the test code is executed. - The laxy calls to ensure_spawned() in the u_boot_console_* implementations. The one downside is that test_env's "state_ttest_env" fixture must be converted to a function-scoped fixture too, since a module-scoped fixture cannot use a function-scoped fixture. To avoid overhead, we use the same trick of returning the same object each time. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28test/py: fix timeout to be absoluteStephen Warren
Currently, Spawn.expect() imposes its timeout solely upon receipt of new data, not on its overall operation. In theory, this could cause the timeout not to fire if U-Boot continually generated output that did not match the expected patterns. Fix the code to additionally impose a timeout on overall operation, which is the intended mode of operation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-24dm: syscon: Allow finding devices by driver dataSimon Glass
We have a way to find a regmap by its syscon driver data value. Add the same for syscon itself. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-20dm: video: test: Test that bitmap display works correctlySimon Glass
Add a test for the 'bmp' command. Test both the uncompressed and compressed versions of the file, since they use different code paths. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20dm: video: test: Add tests for rotated consolesSimon Glass
Test that text is displayed correctly when the console is rotated. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20dm: video: test: Add tests for the video uclassSimon Glass
Add tests that check that the video console is working correcty. Also check that text output produces the expected result. Test coverage includes character output, wrapping and scrolling. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20test/py: add a test for the sleep commandStephen Warren
Execute "sleep", and validate that it sleeps for approximately the correct amount of time. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20test/py: test the ums commandStephen Warren
This test invokes the "ums" command in U-Boot, and validates that a USB storage device is enumerated on the test host system, and can be read from. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20test/py: test the shell if commandStephen Warren
Migrate all most tests from command_ut.c into the Python test system. This allows the tests to be run against any U-Boot binary that supports the if command (i.e. where hush is enabled) without requiring that binary to be permanently bloated with the code from command_ut. Some tests in command_ut.c can only be executed from C code, since they test internal (more unit-level) features of various U-Boot APIs. The migrated tests can all operate directly from the U-Boot console. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20test/py: add test of basic shell functionalityStephen Warren
This tests whether the following features of the U-Boot shell: - Execution of a directly entered command. - Compound commands (; delimiter). - Quoting of arguments containing spaces. - Executing commands from environment variables. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20test/py: test the md/mw commandsStephen Warren
This tests whether md/mw work, and affect each-other. Command repeat is also tested. test/cmd_repeat.sh is removed, since the new Python-based test does everything it used to. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20test/py: add test of setenv/printenv/echoStephen Warren
This tests basic environment variable functionality. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20test/py: test that sandbox exits when askedStephen Warren
Test the sandbox port's implementation of the reset command and SIGHUP handling. These should both cause the U-Boot process to exit gracefully. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20test/py: Implement pytest infrastructureStephen Warren
This tool aims to test U-Boot by executing U-Boot shell commands using the console interface. A single top-level script exists to execute or attach to the U-Boot console, run the entire script of tests against it, and summarize the results. Advantages of this approach are: - Testing is performed in the same way a user or script would interact with U-Boot; there can be no disconnect. - There is no need to write or embed test-related code into U-Boot itself. It is asserted that writing test-related code in Python is simpler and more flexible that writing it all in C. - It is reasonably simple to interact with U-Boot in this way. A few simple tests are provided as examples. Soon, we should convert as many as possible of the other tests in test/* and test/cmd_ut.c too. The hook scripts, relay control utilities, and udev rules I use for my own HW setup are published at https://github.com/swarren/uboot-test-hooks. See README.md for more details! Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> #v3
2016-01-13test/fs: error case fixes/enhancementsStephen Warren
- Use "mkdir -p" to avoid errors when intermediate directories are missing. - Fall back to "dd" when "fallocate" fails. For example, fallocate isn't supported on ext4. - Add error checking for test image generation. Without this, the test simply plows on spewing all kinds of errors which are hard to immediately root-cause. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-01-13block: pass block dev not num to read/write/erase()Stephen Warren
This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-12dm: test: Convert PCI tests to use the DM PCI APISimon Glass
Update these tests to use driver model API functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-11dm: test: usb: Update the USB tests so that they all passSimon Glass
Due to a limitation removed in an earlier patch, USB tests were not seeing all the devices. Update the tests to pass now that all devices are visible. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-07dm: Disable all SPI and SPI flash testsSimon Glass
This subsystem has been broken since commit: 4efad20a sf: Update status reg check in spi_flash_cmd_wait_ready There has so far been no response from the maintainer, and a release is imminent. For now, let's just disable the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-12-07CONFIG_NEEDS_MANUAL_RELOC: Fix warnings when not setTom Rini
Now that we may compile (but not link) code calling fixup_cmdtable when this is not set, we need to always have the declaration available. We should also make sure that anyone calling the function includes <command.h> as that's where the function declaration is. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-07dm: cmd: Relocate subcommands when MANUAL_RELOCMichal Simek
Subcommands contain pointers to functions which are not updated when MANUAL_RELOC is enabled. This patch fix it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-19dm: test: usb: sandbox: Add keyboard tests for sandboxSimon Glass
Add a test that verifies that USB keyboards work correctly on sandbox. This verifies some additional parts of the USB stack. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19dm: test: usb: Add a test for device reorderingSimon Glass
Add tests that 'usb tree' produces the right output when a device changes order on the bus. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19dm: test: usb: Add tests for the 'usb tree' commandSimon Glass
Add tests that this command produces the right output, even when a rescan results in a device disappearing from the bus. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19test: Record and silence console in testsSimon Glass
When running sandbox tests, silence the console to avoid unwanted output. Also, record the console in case tests want to check it. The -v option can be used to enable stdout during tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19Move console definitions into a new console.h fileSimon Glass
The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19dm: usb: Avoid time delays in sandbox testsSimon Glass
Currently the USB tests take around two seconds to run. Remove these unnecessary time delays so that the tests run quickly. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19sandbox: add a sandbox timer and basic testThomas Chou
Add a sandbox timer which get time from host os and a basic test. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-18test: fat: add error-checking to non-contig testStephen Warren
Check the result code of all command that are executed. Without this, if the fallocate invocation fails (this feature is not supported on ext3 filesystems for example) then a zero-length output file will be created, and subsequent the mkfs and mount invocations will fail, which will cause the subsequent dd invocation to attempt to fill up the host's entire free disk space. That's not a nice user experience! Related, if fallocate does fail, try to create the test disk image using dd instead. That should work everywhere. Fixes: 4a28274227d0 ("test: fat: add test of non-contiguous file reads") Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-11-02sandbox: add ADC unit testsPrzemyslaw Marczak
This commit adds unit tests for ADC uclass's methods using sandbox ADC. Testing proper ADC binding: - dm_test_adc_bind() - device binding - dm_test_adc_wrong_channel_selection() - checking wrong channel selection Testing ADC supply operations: - dm_test_adc_supply(): - Vdd/Vss values validating - Vdd regulator updated value validating - Vdd regulator's auto enable state validating Testing ADC operations results: - dm_test_adc_single_channel_conversion() - single channel start/data - dm_test_adc_single_channel_shot() - single channel shot - dm_test_adc_multi_channel_conversion() - multi channel start/data - dm_test_adc_multi_channel_shot() - multi channel single shot Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-29Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2015-10-29dm: test: Add a new test case against dm eth codes for NULL pointer accessBin Meng
U-Boot crashes when doing a 'ping' with the following test scenario: - All ethernet devices are not probed - "ethaddr" for all ethernet devices are not set - "ethact" is set to a valid ethernet device name Add a new test case 'dm_test_eth_act' to hit such scenario. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-27Merge git://git.denx.de/u-boot-dmTom Rini
2015-10-24fs-test.sh: fix pre-requisite detectionStephen Warren
In the following snippet: if [ ! -x `which $prereq` ]; then When $prereq does not exist, `which $prereq` evaluates to the empty string, which results in *no* argument being passed to the -x operator, which then evaluates to true, which is the equivalent of the prereq having been found. In order for this to fail as expected, we must pass an empty argument, which then causes -x to fail. Do this by wrapping the `` in quotes so there's always an argument to -x, even if the value of the argument is zero-length. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-10-24test: fat: add test of non-contiguous file readsStephen Warren
In my patch series to replace fs/fat with "ff.c", I enhanced ff.c to optimize file reading, so that reads of contiguous clusters are submitted to the IO device as a single read. This test attempts to torture-test edge-cases of that enhancement. BTW, the only way I found to validate that this script actually does create non-contiguous files was to manually inspect the FAT bitmap in a hex dump of the FAT image. hdparm --fibmap doesn't work on loop-mounted filesystems. filefrag -v -e seems to lie about files being contiguous when they aren't. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-10-23dm: Rename dev_get_parentdata() to dev_get_parent_priv()Simon Glass
The current name is inconsistent with other driver model data access functions. Rename it and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-22test: Add basic tests for remoteprocNishanth Menon
Use the sandbox environment for the basic tests. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-11test/fs/fs-test.sh: Update expected results and TC10 logicTom Rini
With the changes in 7a3e70c we now get read(2) behavior so trying to read 2MB with 1MB left in the file results in 1MB read and a warning. We update the test logic here to make sure we read back 1MB as expected. This change however changes the overall summary as while EXT4 continues to not have offset support the test now fails when expected to pass rather than fails when expected to fail (and we report that as pass). Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-11Add support for LZ4 decompression algorithmJulius Werner
This patch adds support for LZ4-compressed FIT image contents. This algorithm has a slightly worse compression ration than LZO while being nearly twice as fast to decompress. When loading images from a fast storage medium this usually results in a boot time win. Sandbox-tested only since I don't have a U-Boot development system set up right now. The code was imported unchanged from coreboot where it's proven to work, though. I'm mostly interested in getting this recognized by mkImage for use in a downstream project. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>