| Age | Commit message (Collapse) | Author |
|---|
|
This function is replaced by AVB, we don't need the
CONFIG_FSL_BOOTCTL anymore.
Change-Id: Ib418a4ec565e2a098f0a0ce574710317619bbebe
Signed-off-by: ji.luo <ji.luo@nxp.com>
|
|
Fix typo CONIFG->CONFIG, if not, spl will include i2c uclass code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
We start to use imx-mkimage to package images, so move the DDR
PHY firmware images out of u-boot to imx-mkimage.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
Fix out of tree build.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
To avoid violating GPL license, we can't static link the DDR PHY FW into
uboot binary, so change to attach the FW images with u-boot binary.
Remove the codes and link scripts for static linking the FW in sections.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
* add board support for android and android things.
mx6ul_nxpu_iopb, pico-6ul, pico-imx7d, aquila-6ul
reorganize the Kconfig, and fix the redefine issue.
* add android configure into configure-while
* add a common file mx_android_common.h
it will be included by android and android things.
defconfig only include ANDROID_THINGS_SUPPORT or ANDROID_SUPPORT
* move partition_table_valid into f_fastboot.c.
it's a common code.
* add invalidate_dcache_range in fixed order.
It will have salt invalid issue if we do not add it in order
* add display for pico-7d.
Change-Id: I6f8a4876c2f8bbd098034d1e3f53033109300bca
Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>
|
|
add configs for arm2-8qm.
Change-Id: Ief47e1587f6dbc4f16b243c29fa9bc9c8c80c044
Signed-off-by: sanshan zhang <sanshan.zhang@nxp.com>
|
|
Add fsl_fspi driver for flexspi controller. This driver supports:
1. DDR Quad output
2. Prefetch function for improve read performance.
3. Fast read and Quad read for one line read mode.
4. Read flash FSR register.
5. DM.
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
- some delay is required between SATA_CTRL0 RST SET and CLR.
Otherwise, sata phy link would be down.
- specific the ahci modification by imx8qm platform.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
- one lane pcie gen2 link is okay, the cfg space
of the rc/ep can be accessed.
rc cfg base 0x5f00_0000. ep cfg base 0x6000_0000
- limit to gen2 speed
- mask the wait of eq3 finish, because it is used
for gen3.
- use pcie_ctrla_init_rc() to do the initialization
of the pciea controller
- setup the common pcie codes in pcie_imx8x.c, separate
the different soc speicifed initialization codes into
their own pcie/board codes, move the macro definitions
into the new header file imx8_hsio.h.
- i.MX8QXP only have PCIe Control B. Enable PORT B at default.
i.MX8QM needs to set CONFIG_IMX_PCIEB to enable PORT B.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
To use keyboard on mx6slevk, some configurations are added in android header files.
Need adding them to config_whilelist.txt
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
Add Android support for mx6qarm2 lpddr2 pop target
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
(cherry picked from commit 6356f2b420f3571493755f6b3a307a66a539b60c)
|
|
Add the mipi dsi panel driver for device HX8363 from kernel. The panel
driver needs work with mipi_dsi_northwest driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 0c6d0f4202bae7f61d38ecff1c9d255261f022f2)
|
|
Add the host driver base from kernel for MIPI DSI controller on i.MX7ULP.
The controller provides a DPI-2 interface for LCDIF video stream, and a APB interface
for packet transmission.
The driver provides APIs to register a MIPI panel device and its driver. The panel
driver can use the write packet function provided by the host driver to send control
packets to panel device via APB interface.
MIPI DSI has its PHY and dedicated PLL. The driver will setup them when enabling the DSI
host.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit e02115dd1c5d36ec06eabcb5a0b8e09aaf0f29a0)
|
|
This is a demo that CM4 will boot up by u-boot without typing any
command. It boots up at u-boot early init, try to minimize the time
from power up to the CM4 running.
Since CM4 runs on QSPI NOR XIP, we have to disable the QSPI driver in
u-boot to avoid conflict.
RDC for shared GPIO1 is added, but not enabled, because the kernel is
not ready for shared GPIO1. Users can uncomment the CONFIG_IMX_RDC to
enable it.
Some legacy codes in mx6sxsabreauto are removed. We only need this work
on mx6sxsabresd as a demo.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit f66842f79d4e33ace45762466eed23a86d367642)
|
|
Add support for various boot devices like NAND, QSPINOR, SPINOR,
eMMC, EIMNOR, SATA.
Modify board level files to support the feature and add corresponding defconfig files
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 72c35e80b86f7f75a52db45959793882bb730793)
|
|
Add gis module, current gis is support vadc input.
Add power down function to lcdif driver.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793)
(cherry picked from commit a31dcdafb0963381e7213c59f79a340ef27ec2e2)
(cherry picked from commit 02dfe2e4af5f51d39a51542fb0e81f93faf505bc)
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This moves all of the current ARM errata from various header files and in to
Kconfig. This allows for a minor amount of cleanup as we had some instances
where both a general common header file was enabling errata as well as the
board config. We now just select these once at the higher level in Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
DTC 1.4.2 or later checks DT unit-address without reg property and
vice-versa, and generates lots of warnings. Fixing DT files will
take for a while. Until then, let's turn off the check unless
building with W=*.
Introduce a new helper dtc-option to check if the option is supported
in order to suppress warnings on older versions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
|
|
This is no longer used anywhere.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Re-sync all files under the scripts/kconfig directory with
Linux 4.10.
Some parts include U-Boot own modification. I made sure to not
revert the following commits:
5b8031ccb4ed ("Add more SPDX-License-Identifier tags")
192bc6948b02 ("Fix GCC format-security errors and convert sprintfs.")
da58dec86616 ("Various Makefiles: Add SPDX-License-Identifier tags")
20c20826efab ("Kconfig: Enable usage of escape char '\' in string values")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Pick commit 66b47b4a9dad0 checkpatch: look for common misspellings
from the Linux kernel for spelling check from Kees Cook
In addition pulled in additional changes
commit ebfd7d6237531 checkpatch: add optional --codespell dictionary to find more typos
from the Linux kernel for codespell from Joe Perches
commit f1a63678554f8 checkpatch: remove local from codespell path
from the Linux kernel for dictionary path from Maxim Uvarov
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Now that we have a Kconfig for the API, convert the two boards that
are using this to Kconfig and remove CONFIG_API from the whitelist.
Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Use the kbuild style log.
Prior to this commit:
./scripts/check-config.sh u-boot.cfg \
./scripts/config_whitelist.txt . 1>&2
With this commit:
CFGCHK u-boot.cfg
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This feature is inspired by /proc/config.gz of Linux. In Linux,
if CONFIG_IKCONFIG is enabled, the ".config" file contents are
embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also
enabled, the ".config" contents are exposed to /proc/config.gz.
Users can do "zcat /proc/config.gz" to check which config options
are enabled on the running kernel image.
The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled,
the ".config" contents are compressed and saved in the U-Boot image,
then printed by the new command "config".
The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run
> config
from the command line interface. The ".config" contents will be
printed on the console.
This feature increases the U-Boot image size by about 4KB (this is
mostly due to the gzip-compressed .config file). By default, it is
enabled only for Sandbox because we do not care about the memory
footprint on it. Of course, this feature is architecture agnostic,
so you can enable it on any board if the image size increase is
acceptable for you.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Import scripts/basic/bin2c.c of Linux.
In Linux Kernel, this file was moved to scripts/basic directory by
commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").
In U-Boot, we do not need to follow that commit. Just put it in the
original directory "scripts".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
When SPL is used we need to build the 16-bit start-up code. Add Makefile
rules to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
When BSS does not immediate follow the SPL image we don't need padding
before the device tree. Remove it in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
This Makefile variable can be used in the architecture's main Makefile but
at present it is not set up until later. Set it just before this Makefile is
included.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.
Let's create an entry for "config GENERIC_MMC" with "default MMC",
then convert all macro defines in headers to Kconfig. Almost all
of the defines will go away.
I see only two exceptions:
configs/blanche_defconfig
configs/sandbox_noblk_defconfig
They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
might be wrong with these two boards, so should be checked later.
Anyway, this is the output of the moveconfig tool.
This commit was created as follows:
[1] create a config entry in drivers/mmc/Kconfig
[2] tools/moveconfig.py -r HEAD GENERIC_MMC
[3] manual clean-up of garbage comments in doc/README.* and
include/configs/*.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Allow to use define CONFIG_IS_ENABLED
in include/config_fallbacks.h
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
|
|
This is not used in U-Boot, and the only usage calls a non-existent
function. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not used in U-Boot. Drop this option and associated dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not defined anywhere in U-Boot. Drop this dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_ARCH_MISC_INIT
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_ARCH_EARLY_INIT_R
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not defined by any board in U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.
TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.
Tested boards: CL-SOM-AM57x, CM-T335
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
|
|
|
|
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[York S: clean up scripts/config_whitelist.txt]
Reviewed-by: York Sun <york.sun@nxp.com>
|
|
Move symbol to Kconfig to cleanup configuration file.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
