summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2006-08-24Updates for MCC200 / PRS200 boards:Wolfgang Denk
- support for configurations with SDRAM or DDR memory, - support for highboot and lowboot - adjusting environment definitions
2006-08-18Minor cleanupWolfgang Denk
2006-08-18Add support for WTK FO300 board (TQM5200 based).Marian Balakowicz
2006-08-18Merge with /home/raj/git/u-bootWolfgang Denk
2006-08-18Merge with git+ssh://fifi/home/wd/git/u-boot/masterWolfgang Denk
2006-08-18Fix TQM834x hang.Rafal Jaworowski
2006-08-17Cleanup debug code for yucca board.Wolfgang Denk
2006-08-17Add debug console on COM12 for MCC200 boardWolfgang Denk
2006-08-14Fixed common.h spelling error.Wolfgang Denk
Patch by Cory Tusar, 30 Nov 2005
2006-08-14Fix fatload command on FAT32 formatted partitions.Wolfgang Denk
Patch by Joachim Jaeger, 18 Nov 2005
2006-08-13Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-08-11Merge with /home/raj/git/u-bootWolfgang Denk
2006-08-11Fix preboot message on TQM85xx after switching to hush parser.Wolfgang Denk
2006-08-11Adapt TQM85xx ramdisk address to Linux kernel memory mapWolfgang Denk
2006-08-11Fix PCI-Express on PPC440SPe rev. A.Rafal Jaworowski
2006-08-10Merge with /home/raj/git/u-bootWolfgang Denk
2006-08-10Add support for PCI-Express on PPC440SPe (Yucca board).Rafal Jaworowski
2006-08-07Merge with /home/tur/proj/usb_sticks/u-bootWolfgang Denk
2006-08-07Add commandline history support to all AMCC eval boardsStefan Roese
Patch by Stefan Roese, 07 Aug 2006
2006-08-02Add rudimentary handling of alternate settings of USB interfaces - to fixBartlomiej Sieka
problems with some USB storage devices. Some code readability improvements.
2006-07-27Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-07-27AMCC bamboo (440EP) U-Boot image reduced to 384kbyteStefan Roese
Please see doc/README.bamboo for details. Patch by Stefan Roese, 27 Jul 2006
2006-07-26Fix preboot message on TQM5200 after switching to hush parser.Wolfgang Denk
2006-07-22Add support for 256 MB SDRAM on CPU87Wolfgang Denk
Patch by Josef Wagner, 25 Nov 2005
2006-07-22Add configuration for cam5200 board (based on TQM5200S).Wolfgang Denk
2006-07-21More code cleanupWolfgang Denk
2006-07-21Code cleanupWolfgang Denk
2006-07-21Enable initrd ATAG for xm250 board.Wolfgang Denk
Patch by Josef Wagner, 05 Sep 2005
2006-07-21Add support for friendly-arm SBC-2410X boardWolfgang Denk
Patch by JinHua Luo, 01 Sep 2005
2006-07-21Add support for KVME080 boardWolfgang Denk
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21* Cleanup TQM5200 board configurations:Wolfgang Denk
- make highboot configurations use environment at high end, too, to avoid flash fragmentation - always use redundand environment - don't enable video code for modules without graphics controller - provide useful (though different) mtdparts settings - get rid of CONFIG_CS_AUTOCONF which was always set anyway * Extend mkconfig tool to print more useful target name
2006-07-19Add support for high-boot on TQM5200 and TQM5200S boards.Wolfgang Denk
Hint: the CPLD on the TQM5200 must be programmed with a software version supporting the high boot option! The new TQM5200S is already supporting this option. On the TQM5200 this option will be supported in configurations with MPC5200 rev B processors. To actually "high boot", set jumper X30 on the STK52xx. Patch by Martin Krause, 12 Jul 2006
2006-07-19Add support for new TQM5200 revisionsWolfgang Denk
- Support for TQM5200S (short version without graphic controller) - Support for modules with 'N' type S29GL128N Spansion flashes (requires changes to flash layout) - Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19Fix support for PS/2 keyboard on TQM85xx boardsWolfgang Denk
The PS/2 keyobard driver for the TQM85xx modules only supports the internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't include a DUART, the TQM8560 modules can't be used with the PS/2 keyboard controller on the STK85xx board. The PS/2 keyboard driver should work with the modules TQM8540, TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. Make sure the PS/2 controller on the STK85xx is programmed. Jumper settings: X66 1-2, 9-10; X61 2-3 Patch by Martin Krause, 21 Jun 2006
2006-07-19Adjust RTC century handling on STK52xx board to match Linux driver.Wolfgang Denk
Patch by Martin Krause, 12 Jun 2006
2006-07-19Enable buffered flash writes for TB5200 board.Wolfgang Denk
2006-07-19Fix some bugs in TRAB board flash driver.Wolfgang Denk
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT - remove "Unlock Bypass" mode, because macronix flashes do not support this mode officially - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified for Intel compatible flashes, not for AMD compatible. Patch by Martin Krause, 15 Feb 2006
2006-07-19Add support for TB5200 boardWolfgang Denk
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
2006-07-18Enable buffered flash writes for TQM5200 board.Wolfgang Denk
2006-07-13Merge with /home/mk/11-cmb1920/u-bootWolfgang Denk
2006-07-13Cleanup duplicate definitions in MCC200 config file.Wolfgang Denk
2006-07-12Add support for TQM885D board.Markus Klotzbuecher
Patch by Martin Krause, 20 Mar 2006 Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12Support for spc1920 board.Markus Klotzbuecher
Patch by Markus Klotzbuecher, 12 Jul 2006
2006-07-11MCC200 board: support console on any one of the Quad UART ports.Wolfgang Denk
2006-07-10Major PCMCIA Cleanup to make code better readable and maintainable.Wolfgang Denk
Notes: - Board-dependend code for RPXLITE and RPXCLASSIC-based boards placed to the drivers/rpx_pmcia.c file to avoid duplication. Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c). - drivers/i82365.c has been split into two parts located at board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are the only boards using CONFIG_82365). - Changes were tested for clean build and *very* *few* boards.
2006-07-06MCC200: map the 2nd Quad UART into the processor's address space.Wolfgang Denk
2006-07-06Fix timer problems on AMCC yucca board.Marian Balakowicz
Set Timer Clock Select to use CPU clock as a timer input source.
2006-07-05Bring yucca config more in line with other AMCC boards.Wolfgang Denk
2006-07-05Merge with /home/m8/git/u-bootWolfgang Denk
2006-07-04Add system memory to the PCI region list for AMCC PPC44x CPUs.Marian Balakowicz
Enabled it for Yucca board.
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-21 02:41:50 +0000