summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-01-26Merge git://git.denx.de/u-boot-spiTom Rini
2018-01-24Merge git://git.denx.de/u-boot-mmcTom Rini
2018-01-24power: regulator: s2mps11: add a regulator driver for s2mps11Jaehoon Chung
exynos5422 has the s2mps11 PMIC. s2mps11 pmic has the 10-BUCK and 38-LDO regulators. Each IP and devices in exynos5422 can be controlled by each regulators. This patch is support for s2mps11 regulator driver. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-24Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when ↵Vignesh R
possible" This reverts commit 57897c13de03ac0136d64641a3eab526c6810387. Using bounce_buf.c to handle non-DMA alignment problems is bad as bounce_buf.c does cache manipulations which is not required. Therefore revert this patch in favour of local bounce buffer solution in the next patch. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Reviewed-by: Jason Rush <jarush@gmail.com> Acked-by: Jason Rush <jarush@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24config: cadence_spi: Remove defines read from DTJason Rush
Cleanup unused #define values that are read from the DT. Tested on TI K2G platform: Tested-by: Vignesh R <vigneshr@ti.com> Tested on a socfpga-cyclonev board: Tested-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Signed-off-by: Jason Rush <jarush@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Acked-by: Marek Vasut <marex@denx.de>
2018-01-24spi: Remove spi_setup_slave_fdtMario Six
A previous patch removed the spi_flash_probe_fdt function, which contained the last call of the spi_setup_slave_fdt function, which is now equally obsolete. This patch removes the function. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-24spi: Remove spi_flash_probe_fdtMario Six
Commit ba45756 ("dm: x86: spi: Convert ICH SPI driver to driver model") removed the last usage of the spi_flash_probe_fdt function, rendering it obsolete. This patch removes the function. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-24spi: Remove obsolete spi_base_setup_slave_fdtMario Six
0efc024 ("spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node") added a helper function spi_base_setup_slave_fdt to to set up a SPI slave from a given FDT blob. The only user was the exynos SPI driver. But commit 73186c9 ("dm: exynos: Convert SPI to driver model") removed the use of this function, hence rendering it obsolete. Remove this function, as well as the CONFIG_OF_SPI option, which guarded only this function. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-24drivers: spi: consider command bytes when sending transfersÁlvaro Fernández Rojas
Command bytes are part of the written bytes and they should be taken into account when sending a spi transfer. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24drivers: spi: allow limiting readsÁlvaro Fernández Rojas
For some SPI controllers it's not possible to keep the CS active between transfers and they are limited to a known number of bytes. This splits spi_flash reads into different iterations in order to respect the SPI controller limits. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24wait_bit: use wait_for_bit_le32 and remove wait_for_bitÁlvaro Fernández Rojas
wait_for_bit callers use the 32 bit LE version Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24wait_bit: add 8/16/32 BE/LE versions of wait_for_bitÁlvaro Fernández Rojas
Add 8/16/32 bits and BE/LE versions of wait_for_bit. This is needed for reading registers that are not aligned to 32 bits, and for Big Endian platforms. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-23Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-01-23armv8: ls1088a: Add IFC and eMMC as qixis boot sourcesAshish Kumar
Add macro QIXIS_LBMAP_EMMC, QIXIS_LBMAP_IFC, QIXIS_RCW_SRC_IFC, QIXIS_RCW_SRC_EMMC to enable IFC and eMMC as boot sources for qixis commands. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> [YS: Modify subject and add commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23ls1088a: Add VID support for QDS and RDB platformsRajesh Bhagat
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems. It reads the fusesr register and changes the VDD accordingly by adjusting the voltage via LTC3882 regulator. This patch also takes care of the special case of 0.9V VDD is present in fusesr register. In that case,it also changes the SERDES voltage by disabling the SERDES, changing the SVDD and then re-enabling SERDES. Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23common: board_f: vid: Add VID specific API to adjust core voltageRajesh Bhagat
Adds a VID specific API in init_sequence_f and spl code flow namely init_func_vid which is required to adjust core voltage. VID specific code is required in spl, hence moving flag CONFIG_VID out of spl flags. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23board: common: vid: Add support for LTC3882 voltage regulator chipRajesh Bhagat
Restructures common driver to support LTC3882 voltage regulator chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-01-23 This time around we have a lot of EFI patches from Heinrich. Highlights are: - Allow EFI applications to register as drivers - Allow exposure of U-Boot block devices from an EFI payload - Compatibility improvements
2018-01-22Convert CONFIG_SOC_DA8XX et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SOC_DA8XX CONFIG_SOC_DA850 CONFIG_DA850_LOWLEVEL CONFIG_MACH_DAVINCI_DA850_EVM CONFIG_SYS_DA850_PLL_INIT CONFIG_SYS_DA850_DDR_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> [trini: Rework CONFIG_SYS_DA850_PLL_INIT so it's selected on SOC_DA8XX] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-22efi_driver: EFI block driverHeinrich Schuchardt
This patch provides * a uclass for EFI drivers * a EFI driver for block devices For each EFI driver the uclass * creates a handle * adds the driver binding protocol The uclass provides the bind, start, and stop entry points for the driver binding protocol. In bind() and stop() it checks if the controller implements the protocol supported by the EFI driver. In the start() function it calls the bind() function of the EFI driver. In the stop() function it destroys the child controllers. The EFI block driver binds to controllers implementing the block io protocol. When the bind function of the EFI block driver is called it creates a new U-Boot block device. It installs child handles for all partitions and installs the simple file protocol on these. The read and write functions of the EFI block driver delegate calls to the controller that it is bound to. A usage example is as following: U-Boot loads the iPXE snp.efi executable. iPXE connects an iSCSI drive and exposes a handle with the block IO protocol. It calls ConnectController. Now the EFI block driver installs the partitions with the simple file protocol. iPXE uses the simple file protocol to load Grub or the Linux Kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: add comment on calloc len] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix ExitBootServicesHeinrich Schuchardt
This patch lets the implementation of ExitBootServices conform to the UEFI standard. The timer events must be disabled before calling the notification functions of the exit boot services events. The boot services must be disabled in the system table. The handles in the system table should be defined as efi_handle_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: add check_tpl parameter to efi_signal_eventHeinrich Schuchardt
In ExitBootServices we need to signal events irrespective of the current TPL level. A new parameter check_tpl is added to efi_signal_event(). Function efi_console_timer_notify() gets some comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide function to get last node of a device pathHeinrich Schuchardt
On a block device and its partitions the same protocols can be installed. To tell the apart we can use the type of the last node of the device path which is not the end node. The patch provides a utility function to find this last node. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitionsHeinrich Schuchardt
Add the revision constants. Depending on the revision additional fields are needed in the media descriptor. Use efi_uintn_t for number of bytes to read or write. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_disk_create_partitions a global symbolHeinrich Schuchardt
Up to now we have been using efi_disk_create_partitions() to create partitions for block devices that existed before starting an EFI application. We need to call it for block devices created by EFI applications at run time. The EFI application will define the handle for the block device and install a device path protocol on it. We have to use this device path as stem for the partition device paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide a function to create a partition nodeHeinrich Schuchardt
Provide new function efi_dp_part_node() to create a device node for a partition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_block_io_guid a global symbolHeinrich Schuchardt
The GUID of the EFI_BLOCK_IO_PROTOCOL is needed in different code parts. To avoid duplication make efi_block_io_guid a global symbol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: return NULL from device path functionsHeinrich Schuchardt
For the construction of device paths we need to call the AllocatePool service. We should not ignore if it fails due to an out of memory situation. This patch changes the device path functions to return NULL if the memory allocation fails. Additional patches will be needed to fix the callers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: consistently use efi_handle_t for handlesHeinrich Schuchardt
We should consistently use the efi_handle_t typedef when referring to handles. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix signature of efi_disconnect_controllerHeinrich Schuchardt
Handles should be passed as efi_handle_t and not as void *. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement ConnectControllerHeinrich Schuchardt
Implement the ConnectController boot service. A unit test is supplied in a subsequent patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: debug output installed device pathHeinrich Schuchardt
When a device path protocol is installed write the device path to the console in debug mode. For printing the new macro EFI_PRINT is used, which can be reused for future diagnostic output. Remove unused EFI_PRINT_GUID macro Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: list of open protocol infosHeinrich Schuchardt
Add a list of open protocol infos to each protocol of a handle. Provide helper functions to access the list items. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: colored test outputHeinrich Schuchardt
Add color coding to output: test section blue success green errors red todo yellow summary white others light gray Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> [agraf: Fold in move of set_attribute before the print] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: support device path for IDE and SCSI disksHeinrich Schuchardt
Correctly create the device path for IDE and SCSI disks. Support for SATA remains to be done in a future patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22fs: fat: Drop CONFIG_SUPPORT_VFATTuomas Tynkkynen
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since 2003), so as a result VFAT support is always enabled regardless of whether a board config defines it or not. Drop this unnecessary option. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22env: ENV_IS_IN_FAT improvementsTuomas Tynkkynen
Make it select FS_FAT as well, because if it's not selected, enabling ENV_IS_IN_FAT causes a Kconfig warning: warning: (ENV_IS_IN_FAT) selects FAT_WRITE which has unmet direct dependencies (FS_FAT) This also allows dropping some code from config_fallbacks. Also drop the unnecessary help text about having to enable CONFIG_FAT_WRITE - Kconfig automatically handles that. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITETuomas Tynkkynen
The symbol's been converted to Kconfig for a while, poplar is the only one #defining it. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22fs: Migrate ext4 to KconfigTuomas Tynkkynen
Migrate the following symbols to Kconfig: CONFIG_FS_EXT4 CONFIG_EXT4_WRITE The definitions in config_fallbacks.h can now be expressed in Kconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22Convert CONFIG_ROCKCHIP_USB2_PHY to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ROCKCHIP_USB2_PHY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_OMAP_USB_PHY to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_OMAP_USB_PHY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_TWL4030_USB to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_TWL4030_USB Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_DAVINCI_SPI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DAVINCI_SPI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_USB_MUSB_HCD et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_USB_MUSB_HCD CONFIG_USB_MUSB_UDC CONFIG_USB_DAVINCI CONFIG_USB_OMAP3 CONFIG_USB_DA8XX CONFIG_USB_AM35X Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_USB_MUSB_OMAP2PLUS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_PIO_ONLY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22dm: add dev_read_u32()Masahiro Yamada
dev_read_u32_default() always returns something even when the property is missing. So, it is impossible to do nothing in the case. One solution is to use ofnode_read_u32() instead, but adding dev_read_u32() will be helpful. BTW, Linux has an equvalent function, device_property_read_u32(); it is clearer that it reads a property. I cannot understand the behavior of dev_read_u32() from its name. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-21core: Add {ofnode, dev}_translate_address functionsMario Six
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21dm: pinctrl: sync with Linux to use pin_config_paramPeng Fan
Sync with Linux commit 30a7acd573899fd8b("Linux 4.15-rc6") to use enum pin_config_param. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-21dm: fix typo falbackHeinrich Schuchardt
%s/falback/fallback/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19Merge git://git.denx.de/u-boot-arcTom Rini
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-04 00:27:20 +0000