| Age | Commit message (Collapse) | Author |
|---|
|
Follow the rename imx6q-apalis-eval_v1_0.dtb to imx6q-apalis_v1_0-eval.dtb
in the kernel.
The v1_0 denotes the Apalis module version, not the evaluation board version.
|
|
These methods should be passed a slave device, not a bus. This matches the
old SPI interface. It is important to know which device is claiming the bus
so passing a bus is not that useful.
Reported-by: Haikun Wang <haikun.wang@freescale.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
|
|
Implement early TPS6586X PMIC rail configuration setting SM0 being
VDD_CORE_1.2V to 1.2 volts and SM1 being VDD_CPU_1.0V to 1.0 volts.
While those are PMIC power-up defaults the SoC might have been reset
separately with certain rails being left at lower DVFS states which
is e.g. the case upon watchdog reset while otherwise nearly idling.
|
|
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
[add CONFIG_DM to colibri_vf_defconfig]
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Move the Freescale DSPI driver over to driver model.
Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
|
|
Add additional environment variable "fdt_fixup" which will be
called between device tree load command and kernel boot command.
This allows to change device tree using U-Boot scripting
environment.
|
|
Enable the display driver on Apalis T30. Unfortunately the PWM pin
muxing wasn't any good neither which made that display stay dark.
|
|
On popular request enable the display driver on Colibri T30. A few
notes about some things encountered during porting: While analogue VGA
(e.g. via the on-carrier RAMDAC) worked just fine from the beginning
the EDT display flickered like crazy which turned out to be a pin
muxing issue. Unfortunately the PWM pin muxing wasn't any good neither
which made that display stay dark. Enjoy.
|
|
On popular request make the display driver from T20 work on T30 as
well. Turned out to be quite straight forward. However a few notes
about some things encountered during porting: Of course the T30 device
tree was completely missing host1x as well as PWM support but it turns
out this can simply be copied from T20. The only trouble compiling the
Tegra video driver for T30 had to do with some hard-coded PWM pin
muxing for T20 which is quite ugly anyway. On T30 this gets handled by
a board specific complete pin muxing table. The older Chromium U-Boot
2011.06 which to my knowledge was the only prior attempt at enabling a
display driver for T30 for whatever reason got some clocking stuff
mixed up. Turns out at least for a single display controller T20 and
T30 can be clocked quite similar. Enjoy.
|
|
Enable CONFIG_IP_DEFRAG and set CONFIG_TFTP_BLOCKSIZE to 16384 (resp.
1536 on Colibri T20). This increases the tftp download speed
considerably.
While at it enable CONFIG_TFTP_TSIZE which limits the progress bar to
fifty '#' independent of the downloaded file size.
While at it also fix some spacing from using spaces to tabs.
|
|
This is a copy/paste error from the Apalis T30 configuration as there
we show the Linux framebuffer console by default on the second
framebuffer instance being the DVI-D aka HDMI one due to analogue VGA
not being available. This patch changes it for the Colibri T30 back to
the first framebuffer instance being the parallel RGB aka TFTLCD one
which usually gets converted to analogue VGA via an on-carrier RAMDAC
(e.g. at least on the Colibri Evaluation board as well as Iris this is
the case).
|
|
Add support for ARM global timer. This allows to save the platform
wide PIT timer for other purposes such as MQX on the secondary
Cortex-M4 core.
|
|
Use device-tree fixup to communicate the MTD partitions to the
kernel. U-Boot's mtdparts environment variable will be used as
partition source for the device-tree based partition table too.
|
|
Add new identifiers for Cortex-M4 related (RT)OS eCos, MQX and
Bare-metal.
|
|
Add m4boot command which allows to boot FIT images on the Cortex-M4
kernel. The command currently only supports FIT image, which allows
to provide entry point and load addresses for all boot artifacts.
Currently, the Cortex-M4 mini loader needs to be loaded manually
to Kernel loadaddr - 0x80 (e.g. 0x8f000000, if kernel is loaded at
0x8f000080).
|
|
Enable CONFIG_IP_DEFRAG and set CONFIG_TFTP_BLOCKSIZE to 16384.
This increases the tftp download speed from ~2.5 to ~8.2MiB/s.
While at it enable CONFIG_TFTP_TSIZE which limits the progress bar
to 50 '#' indepent off the downloaded file size.
|
|
Increase console IO buffer size to 1024 from the previous value of 256.
The previous value was too short for editing environment variables like
ubiboot, from the console.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
|
|
Enable CONFIG_IP_DEFRAG and set CONFIG_TFTP_BLOCKSIZE to 16384.
This increases the tftp download speed considerably.
While at it enable CONFIG_TFTP_TSIZE which limits the progress bar to
fifty '#' indepent off the downloaded file size.
|
|
Fix setsdupdate by adding missing 'usb start' command.
While at it also add USB start to setethupdate as doing it twice won't
hurt (e.g. it returns immediately only 'usb reset' does a full rescan).
|
|
Enable OF system setup to add hardware revision and serial number
information to the device-tree in case a mainline Linux kernel with any
such is booted.
While at it default back to the regular 8 MB DFU data buffer size.
|
|
Enable optional raw initrd support to allow boot using an initrd.
|
|
|
|
Use ft_system_setup to set Toradex specific device-tree properties.
At first, this is only the serial-number, which is using a property
which is about to be standardized in the binding documentation of
the Linux kernel.
|
|
This uses the tools/logos/toradex.bmp instead of the default
tux logo and places it centered on screen.
While at it group the display releated variables together.
|
|
|
|
|
|
Swap the order of the Toradex factory configuration block location in
respect to the U-Boot environment. This to again be in-line with
mainline.
Move the Toradex factory configuration block to a 3 MB offset.
|
|
Add consoleblank=0 to disable console blanking by default. To use
initramfs without the need of creating a U-Boot image using mkimage,
enable CONFIG_SUPPORT_RAW_INITRD too.
|
|
Some functionality is repetitve accross the boards. This creates
a common place for U-Boot functions which need to be implemented
similarly for all Toradex modules.
|
|
use
make colibri_imx6_defconfig
|
|
Use for the industrial temperature range rated modules:
make apalis_imx6_it_defconfig
Use for the commercial temperature range rated modules:
make apalis_imx6_defconfig
|
|
|
|
Cleanup various whitespaces throughout its configuration file.
|
|
Fix setupdate handling.
While at it also fix using asix_mac rather than igb_mac on Colibri T30.
|
|
Migrate Colibri T20 to U-Boot 2015.04.
|
|
Add I2C support in order to subsequently allow disabling the PMIC sleep
mode on low supply voltage.
|
|
Add LCD display support defaulting to VESA VGA resolution. Different
resolutions configurable via device-tree.
|
|
Also, the kernel argument has been renamed (to fec.macaddr) and uses
a different format (0x00,0x2d...). The FEC ethernet address is assigned
through device tree nowadays. Hence remove the old argument "fec_mac"
without replacement.
|
|
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
|
|
Add environment variables for default framebuffer support using a
default VGA mode. Also remove memargs, since we use memory size to
reserve the framebuffer which does not get overwritten by the
Linux kernel. See related commit: 1d7518ec3a ("video: dcu: fix
framebuffer to the end of memory")
|
|
Fix the framebuffer location to the very end of the available memory.
This allows to remove the area from available memory for the kernel,
which in turn allows to display the splash screen through the while
Linux kernel boot process.
Ideas has been taken from the sunxi display driver, e.g.
20779ec3a5 ("sunxi: video: Dynamically reserve framebuffer memory")
|
|
The Vybrid SoC family has the same display controller unit (DCU)
like the LS1021A SoC. This patch adds platform data, pinmux defines
and clock control to enable the driver for Vybrid based boards too.
|
|
Implement boot mode for Vybrid SoC. Boot mode selection works much
like the i.MX6 implementation. Provide a standard set of boot modes
for the two eSDHC instances and use the reserved mode to jump into
SoC's recovery mechanism, the serial downloader.
|
|
Display model information even if config block is missing.
While at it fix an indentation issue, update copyright period and fix
abbreviated setenv commands.
|
|
Migrate Apalis/Colibri T30 to U-Boot 2015.04.
|
|
Allow for optional custom USB gadget manufacturer/product/vendor
IDs/strings to be specified.
|
|
Migrating our BSPs towards mainline U-Boot I noticed it suddenly booting
slower. With mainline Linux I noticed about a 1 to 2 second increase
while booting downstream L4T takes 10 to 15 seconds longer!
This reverts commit 858530a8c0a7ce7e573e513934804a00d6676813.
Conflicts:
drivers/serial/Makefile
(cherry picked from commit 752aae30a791326581efafbb761c0cebaba8d3ea)
Conflicts:
drivers/serial/serial_tegra.c
include/configs/tegra-common.h
|
|
Add default environment variable allowing update of the on-board flash
using USB mass storage in addition to SD card.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
[merged with SD-card update script]
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
|
|
Add writebcb command which creates a NAND Boot Configuration Block
(BCB) at the beginning of the active flash device. The BCB stores
the information for the SoC internal boot ROM where the application
with a valid IVT header can be found on the NAND device. The first
two argument of the command need an offset of the NAND device where
the primary and secondary application can be found.
Typically, U-Boot is the application which gets loaded by the boot
ROM. Hence, the offset address need to be the address where U-Boot
(u-boot.imx along with a 0x400 long prefix) is stored on the device.
At least one location is mandatory.
Currently only the FCB (Firmware Configuration Block) is written to
the device. The DBBT (Discovered Bad Block Table) is optional and
not created by writebcb currently.
|
