summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2021-10-05colibri-imx7: move CONFIG_BOOTCOMMAND from header to defconfigMing Liu
Move CONFIG_BOOTCOMMAND definition from colibri_imx7.h to colibri_imx7_defconfig, to be more flexible, for instance, it could be overridden by merge_config.sh script. Signed-off-by: Ming Liu <ming.liu@toradex.com>
2021-10-05colibri-imx6ull: move CONFIG_BOOTCOMMAND from header to defconfigMing Liu
Move CONFIG_BOOTCOMMAND definition from colibri-imx6ull.h to colibri-imx6ull_defconfig, to be more flexible, for instance, it could be overridden by merge_config.sh script. Signed-off-by: Ming Liu <ming.liu@toradex.com>
2021-09-21colibri-imx6ull: reset vidargs env variableMarcel Ziswiler
Unfortunately, vidargs cause very suboptimal display timings to be calculated which destroys our nice VESA VGA definition from the device tree. Get rid of it. Related-to: ELB-4080 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-09-01colibri-imx7: improve env badblock managementFrancesco Dolcini
Use the complete 512kb (4 blocks) nand partition reserved for u-boot environment instead of just the first block, this allows the module to have a working environment even if 3 blocks are bad. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-09-01colibri-imx6ull: improve env badblock managementFrancesco Dolcini
Use the complete 512kb (4 blocks) nand partition reserved for u-boot environment instead of just the first block, this allows the module to have a working environment even if 3 blocks are bad. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-08-30colibri-imx6ull: reset vidargs env variableOleksii Bidnichenko
The "vidargs" variable is needed only if the board is not aware of the display that is connected to it. Since the EMMC version with the usage of overlays is able to specify display settings, such a variable becomes redundant. Related-to: ELB-4065
2021-08-12colibri-imx6ull: add tezi recovery configMax Krummenacher
This configuration creates an U-Boot which does not use any storage device, i.e. no eMMC or NAND. It is used to boot U-Boot over recovery aka. Serial Downloader without the need to know if the module uses eMMC or NAND for storage. It detects the storage device type and start the Toradex Easy Installer with the matching configuration. Note that for NAND devices the mtd partitioning is not patched into the device tree by U-Boot. It must be part of the provided device tree. Related-to: TEI-922 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2021-07-29colibri-imx6ull: add emmc variantMax Krummenacher
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the 'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used on other SKUs. Related-to: ELB-4056, ELB-4057 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2021-07-28colibri-imx6ull: imximage.cfg: integrate new 1GiB RAM variantPhilippe Schenker
Integrate new Toradex SKU 0062 Colibri iMX6ULL 1GB IT. This commit basically adjusts three parameters of the RAM settings: Increase density from 4Gb to 8Gb Increase ROW address from 15 to 16 Increase tRFC (refresh command time) from 260 to 350 This timing is valid for all Toradex Colibri iMX6ULL SKUs Related-to: ELB-4055, ELB-4057 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2021-07-09colibri_vf: synchronize/improve memory optionsStefan Agner
Synchronize initramfs related configuration options and improve memory layout. The memory layout with an offset of 16MiB allows to boot bigger kernels. With AUTO_ZRELADDR, which is pretty much the standard nowadays, the kernel relacates itself to PC masked with 0xf8000000 plus a text offset of 0x8000 (hence 0x80008000 for Vybrid). With a 16MiB offset from the start of memory and a 16MiB distance to the device-tree, we allow kernel up to ~16MiB. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> (cherry picked from commit c451702f146b4dffb10a5d76002e09d2e37315a9)
2021-06-14toradex: enable using another distro boot script for TEZIOleksandr Suvorov
The distro boot script for TEZI has another name to prevent u-boot of regular BSP trying to boot TEZI image. Expand the usage of TDX_EASY_INSTALLER Kconfig option to seek and use the TEZI-specific name of the script. Related-to: TEI-791 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-06-11configs: colibri_imx6ull: add ubiboot for easy installerPhilippe Schenker
Related-to: TEI-775 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2021-06-11configs: colibri_imx7: add ubiboot for easy installerPhilippe Schenker
Related-to: TEI-775 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2021-05-26colibri-imx7: full support of tezi-recovery imageOleksandr Suvorov
The recovery image needs to support both Colibri-iMX7 NAND and Colibri-iMX7 eMMC modules. Forward port the solution for this from u-boot 2016.11, originally developed by Stefan Agner <stefan.agner@toradex.com>. Related-to: TEI-775 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-05-17configs: arm32: add default value of rootpathOleksandr Suvorov
Variable rootpath is used by distroboot script as a default path to a rootfs on an NFS server. Set this variable properly for all aarch32 modules, which support a Distro Boot. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-02-17apalis/colibri_imx6: remove video= settingsOleksandr Suvorov
Since we have a full set of overlays for display interfaces for both Apalis iMX6Q and Colibri iMX6DL modules, the video= settings are obsolete. Remove these settings from the U-Boot. Related-to: ELB-3395, ELB-3243, ELB-3240 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-29include: colibri*imx6ull/imx7: add missing tdxargs variablePhilippe Schenker
All the other boards have tdxargs specified for setting manual kernel command-line arguments. Add them also to NAND-based boards. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-11-30apalis_imx6: fix vidargs settingsOleksandr Suvorov
The default mxcfb devices were changed in the Toradex Linux kernel. Make the appropriate change in vidargs u-boot env variable. Realted-to: ELB-3240 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-11-29colibri_imx6: adjust boot orderIgor Opaniuk
Remove duplicate of mmc0, set this boot order: 1) SD 2) eMMC 3) USB 4) DHCP boot Related-to: ELB-3041 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-10-29toradex: drop legacy nfsboot scriptIgor Opaniuk
Drop legacy nfsboot script in favor of distroboot DHCP boot. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-10-29toradex: set default dhcp distroboot scriptnameIgor Opaniuk
Use the same name of DHCP Distroboot script as in regular eMMC case. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-30colibri_imx7: boot linux kernel in secure modeMarcel Ziswiler
NXP i.MX 7 downstream requires the Linux kernel to boot in secure mode therefore set bootm_boot_mode to sec. We can/will override this in our OE recipe should we build for mainline/upstream. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-09-11apalis_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk
Provide fdtfile value in default env instead of setting it dynamically in runtime. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk
Provide fdtfile value in default env instead of setting it dynamically in runtime. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri_imx7: use preboot for fdtfile evaluationIgor Opaniuk
ENable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri_vf: use preboot for fdtfile evaluationIgor Opaniuk
ENable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri-imx6ull: use preboot for fdtfile evaluationIgor Opaniuk
ENable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28colibri_imx7: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28colibri-imx6ull: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-27rk3399: Add BOOTENV_SF commandJagan Teki
Add missing BOOTENV_SF command in rk3399 config. Fix it. Fixes: f263b860acf8 ("rk3399: Enable SF distro bootcmd") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reported-by: Suniel Mahesh <sunil@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-22arm: wandboard: move CONFIG_MXC_UART to defconfigHeinrich Schuchardt
For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in the .config file. To avoid duplicate definitions move the setting from include/configs/wandboard.h to configs/wandboard_defconfig. Document the debug UART settings in the README. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-06-22colibri_imx6: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22colibri_imx7: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22apalis_imx6: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22apalis-tk1: enable distrobootIgor Opaniuk
1. Use distro_bootcmd as default boot command instead of legacy emmcboot wrapper. 2. Drop emmcboot and sdboot wrappers. 3. Provide proper boot order for Distro Boot. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22configs/colibri_vf.h: drop sdboot in favour of distro_bootcmdMax Krummenacher
The distro bootscript uses kernel_image to get the file name of the kernel, so change that variable name. UBI boot has precedence in the default boot command. If one wants to boot from SD with a working NAND installation stop in U-Boot and enter: setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-06-22colibri-imx6ull/imx7: define bootubipart for distro bootStefan Agner
When using distro boot to boot from UBI volumes the boot partition has been hardcoded to "UBI" (capital letters). However, our default MTD layout uses "ubi" (lower case letter). Define "ubi" as the default UBI partition for distro boot for Toradex. This allows to use distro boot without having to redefine the MTD partition layout which is useful for TorizonCore. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2020-06-22colibri_imx7: add addresses required for distro bootStefan Agner
Define addresses required for full distro boot support. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2020-06-22colibri-imx8x: declare consoleargsOleksandr Suvorov
Store all console-related kernel parameters in dedicated variable. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-06-22mx6cuboxi: Convert to DM_ETHFabio Estevam
Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet Driver Model. This also brings the benefit of restoring Ethernet functionality. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
2020-06-18ARM: rmobile: Increase PHY auto-negotiation timeout to 20sMarek Vasut
The ethernet PHY on all known Gen3 boards takes a while to come out of reset, increase the auto-negotiation timeout to prevent it from timing out in case the ethernet is used right after the board was reset. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-06-18colibri_imx6: fix video stdout in default environmentAnatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-18apalis_imx6: fix video stdout in default environmentAnatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-18cm_fx6: fix video stdout in default environmentAnatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il>
2020-06-11arm: Remove pcm051 boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11arm: Remove omap3_pandora_defconfig boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: davinci: Drop non-dm codeJagan Teki
Now all boards which are using davinci SPI driver have moved to SPL_DM so drop the unneeded non-dm code. Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2020-06-11ks2_evm: Switch to DM_SPL, SPL_OF_CONTROLJagan Teki
This would make SPL build to DM_SPL, SPL_OF_CONTROL. Build fine with but not tested. Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-09Merge tag 'u-boot-imx-20200609' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-30 23:12:15 +0000