summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2007-08-14Merge with /home/stefan/git/u-boot/zeusStefan Roese
2007-08-14ppc4xx: Add initial Zeus (PPC405EP) board supportStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-10Coding style cleanupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-10Add PPC4xx-HCU4 and HCU5 boards: HCU5 configNiklaus Giger
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2007-08-10Add PPC4xx-HCU4 and HCU5 boards: HCU4 configNiklaus Giger
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2007-08-10ppc4xx: Update lwmon5 POST configurationStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-31ppc4xx: Update AMCC Bamboo 440EP supportEugene OBrien
Changed storage type of cfg_simulate_spd_eeprom to const Changed storage type of gpio_tab to stack storage (Cannot access global data declarations in .bss until afer code relocation) Improved SDRAM tests to catch problems where data is not uniquely addressable (e.g. incorrectly programmed SDRAM row or columns) Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules Fixed AM29LV320DT (OpCode Flash) sector map Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-31ppc4xx: Update 440EPx lwmon5 board supportStefan Roese
- Clear ECC status regs after ECC POST test - Set dcbz for ECC generation with caches enabled as default - Code cleanup Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-26ppc4xx: Add support for AMCC 405EP Taihu boardJohn Otken
Signed-off-by: John Otken <john@softadvances.com>
2007-07-26ppc4xx: lwmon5: Update Lime initializationAnatolij Gustschin
Change Lime SDRAM initialization to now support 100MHz and 133MHz (if enabled). Also the framebuffer is initialized to display a blue rectangle with a white border. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-24ppc4xx: lwmon5: Support for 128 MByte NOR FLASH addedStefan Roese
The used Intel NOR FLASH chips have internally two dies, and are now treated as two seperate chips. Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-20POST: Add ECC POST for the lwmon5 boardPavel Kolesnikov
This patch adds ECC Post test for the Lwmon5 board based on PPC440EPx to U-Boot. Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> Acked-by: Yuri Tikhonov <yur@emcraft.com> Acked-by: Stefan Roese <sr@denx.de>
2007-07-16Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-07-16ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-12Merge with /home/tur/git/u-boot#cm1_qp1Wolfgang Denk
2007-07-11CM1.QP1: Support for the Schindler CM1.QP1 board.Bartlomiej Sieka
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-07-11[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failedHeiko Schocher
- now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-11Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-07-10Coding style cleanup; update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-09Merge with /home/hs/Atronic/u-bootWolfgang Denk
2007-07-06ppc4xx: Update lwmon5 default environmentStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-06ppc4xx: Update lwmon5 boardStefan Roese
Add unlock=yes environment variable to default variables to unlock the CFI flash by default. Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-06Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-07-06Code cleanup and default config update for STC GP3 SSA board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-05Merged POST framework with the current TOT.Sergei Poselenov
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2007-07-04ppc4xx: Update lwmon5 boardStefan Roese
- Add optional ECC generation routine to preserve existing RAM values. This is needed for the Linux log-buffer support - Add optional DDR2 setup with CL=4 - GPIO50 not used anymore - Lime register setup added Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-03Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk
2007-06-25Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-06-25[PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANGHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-25ppc4xx: Add pci_pre_init() for 405 boardsStefan Roese
This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-25ppc4xx: Maintenance patch for esd's CPCI405 derivatsMatthias Fuchs
-add pci_pre_init() for pci interrupt fixup code -disable phy sleep mode via reset_phy() function -use correct io accessors -cleanup Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-06-22Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk
2007-06-22Extend POST support for PPC440Igor Lisitsin
Added memory, CPU, UART, I2C and SPR POST tests for PPC440. Signed-off-by: Igor Lisitsin <igor@emcraft.com> --
2007-06-22[PCS440EP] upgrade the PCS440EP board:Heiko Schocher
- Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-20Coding style cleanup. Refresh CHANGELOG.Wolfgang Denk
2007-06-20Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-06-19[ppc4xx] Fix problem with NAND booting on AMCC AcadiaStefan Roese
The latest changes showed a problem with the location of the NAND-SPL image in the OCM and the init-data area (incl. cache). This patch fixes this problem. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-15[ppc4xx] Change lwmon5 port to work with recent 440 exception reworkStefan Roese
Now CONFIG_440 has to be defined in all PPC440 board config files. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-15Merge with /home/stefan/git/u-boot/denx-440-exceptionsStefan Roese
2007-06-15ppc4xx: Clean up 440 exceptions handlingGrzegorz Bernacki
- Introduced dedicated switches for building 440 and 405 images required for 440-specific machine instructions like 'rfmci' etc. - Exception vectors moved to the proper location (_start moved away from the critical exception handler space, which it occupied) - CriticalInput now serviced (with default handler) - MachineCheck properly serviced (added a dedicated handler and return subroutine) - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, unhandled and those not relevant for 4xx were eliminated) - Eliminated Linux leftovers, removed dead code Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Rafal Jaworowski <raj@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-15[ppc4xx] Add initial lwmon5 board supportStefan Roese
This patch adds initial support for the Liebherr lwmon5 board euqipped with an AMCC 440EPx PowerPC. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-15[ppc4xx] Extend 44x GPIO setup with default output stateStefan Roese
The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup is extended with the default GPIO output state (level). Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-08TQM5200: Add Flat Device Tree support, update default env. accordingly.Bartlomiej Sieka
Signed-off-by: Jan Wrobel <wrr@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-06-08Fix config problems on SC3 board; make ide_reset_timeout work.Wolfgang Denk
2007-06-06Coding Style cleanup; generate new CHANGELOG file.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-06-06Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk
2007-06-06Merge with /home/wd/git/u-boot/custodian/u-boot-armWolfgang Denk
2007-06-06Merge with /home/stefan/git/u-boot/acadia-nand-bootStefan Roese
2007-06-06ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval boardStefan Roese
This patch adds NAND booting support for the AMCC Acadia eval board. Please make sure to configure jumper J7 to position 2-3 when booting from NOR, and to position 1-2 when booting for NAND. I also added a board command to configure the I2C bootstrap EEPROM values. Right now only 267MHz is support for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 267 nor ;to configure the board for 267MHz NOR booting => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-05Merge branch 'mpc8641'Jon Loeliger
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 23:58:52 +0000