summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2013-01-16ENGR00240261 support fastboot for nand boot in sabreauto_androidb02247
Add partition table for nand boot. Signed-off-by: b02247 <b02247@freescale.com>
2013-01-10ENGR00239607 add nand config for android sabreautob02247
Add nand config for android sabreauto Signed-off-by: b02247 <b02247@freescale.com>
2013-01-08ENGR00238363: mx6dl: epdc: remove epdc macro redefinition in config fileFugang Duan
Remove mx6dl_arm2 and mx6dl_sabresd config file epdc macro redefinition to avoid build warning. Signed-off-by: Fugang Duan <B38611@freescale.com>
2013-01-04ENGR00238834: mx6solo: add MFG support for mx6solo sabresd boardJason Liu
add MFG support for mx6solo sabresd board Signed-off-by: Jason Liu <r64343@freescale.com>
2012-12-27ENGR00238371: mx6solo: sabresd: make system prompt indicate solo configJason Liu
make system prompt indicate solo config when using mx6solo_sabresd: "MX6Solo SABRESD U-Boot > " Signed-off-by: Jason Liu <r64343@freescale.com>
2012-12-21ENGR00238048: Add support for processor serial ATAG in uboot for iMX53Nitin Garg
Add support for Processor UID ATAG in uboot for iMX53. The UID is present in Fuses bank 0 at offset 0x20. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
2012-12-18ENGR00235540 add sabreauto_6q config for androidb02247
Support fastboot and recovery Signed-off-by: b02247 <b02247@freescale.com>
2012-12-11ENGR00236620: Add Android fastboot and recovery reboot supportNitin Garg
Add support for Android fastboot and recovery reboot commands for iMX5. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
2012-11-28ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.Zhang Xiaodong
Add HDMIdongle board for imx6Q/DL under board/freescale. Signed-off-by: Zhang Xiaodong <B39117@freescale.com>
2012-11-27ENGR00233168 - U-Boot fails to boot from eMMCOliver Brown
Aligning the flash header to remove the boot plugin as in previous release. Signed-off-by: Oliver Brown <oliver.brown@freescale.com>
2012-11-20ENGR00234353-2: mx6q_sabreauto_weimnor fix redundant env offsetAdrian Alonso
* Fix redundant enviroment offset * Disable I2C support as they share pads * Enable flash empty information * weim-nor partition layout +-----------------+ 0x08000000 + u-boot + +-----------------+ 0x08040000 (256k) + u-boot env + +-----------------+ 0x08060000 (128k) + u-boot redundat + +-----------------+ 0x08080000 (128k) + Kernel + +-----------------+ 0x08480000 (4M) + Rootfs + +-----------------+ (~27M) Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2012-11-20ENGR00234353-1: mx6_sabreauto fix weim-nor bootAdrian Alonso
* Fix weim-nor boot failure * Group weim-nor conflict modules If not defined CONFIG_CMD_WEIMNOR enable SPI-NOR and I2C (default) else enable weim-nor * Remove FLASH_SIZE macro, size is query by CFI driver * Enable flash empty information Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2012-11-19ENGR00233366-5 Anatop PFUZE: move LDO bypass code to kernelRobin Gong
move LDO bypass code and one PFUZE1.0 workaround code to kernel. Remove CONFIG_MX6_INTER_LDO_BYPASS in u-boot Signed-off-by: Robin Gong <b38343@freescale.com>
2012-11-15ENGR00233716-1: mx6q_sabreauto aling spi-nor environment offssetAdrian Alonso
* Aling spi-nor environment offsset to 256k this allows a partition layout +-----------------+ 0x0 + bootloader + +-----------------+ 0x40000 (256k) + boot env + +-----------------+ 0x42000 (8k) + kernel + +-----------------+ Remaining space (~3.7M) Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2012-11-12ENGR00233307 Need secure/encrypted boot for Widevine support.Dan Douglass
* Adding the config option CONFIG_SECURE_BOOT to the SabreSD board, but defaulting it to be disabled. Removed the CONFIG_SECURE_BOOT key from mx6q_arm2_android.h so that it is only in one file, include/configs/mx6q_arm2.h * Fixed up an address alignment check in authenticate_image(). The test would fail in the event the address is already aligned. Also, added some debug code which can be enabled to assist in testing secure images. * Added support for authenticating an image when using booti. * Adding support for secure boot to the Sabre SD board. * Added support for encrypted boot to mx6q arm2 board linker script. Signed-off-by: Dan Douglass <dan.douglass@freescale.com>
2012-11-02ENGR002232258 MX6Q-ARM2: add a NAND boot config for ubootHuang Shijie
add a new config for NAND boot in the mx6q-arm2 board. Signed-off-by: Huang Shijie <b32955@freescale.com>
2012-10-30ENGR00230967 Enable recovery mode by keys when bootLiGang
1. Add matrix key support 2. Add recovery mode support by pressing power key and volume down key when boot SW10 on MX6SL-EVK board configed as volume down key. SW1 on MX6SL-EVK board configed as power key Signed-off-by: LiGang <b41990@freescale.com>
2012-10-25ENGR00231155 add enable_wait_mode=off for all the mx6q/dl mfg ubootTony LIU
- currently only a work around can be applied, the root cause is not identified yet The workaround is to disable wait mode, so all the mfgtool uboot need to add "enable_wait_mode=off" in the cmd line pass to kernel Signed-off-by: Tony LIU <junjie.liu@freescale.com>
2012-10-18ENGR00230104 mx6q_sabreauto_nand: fix fec phy addressAdrian Alonso
* Fix FEC Phy address to 1 * Enable micrel phy support, revA compatibility Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2012-10-18ENGR00230334: Fix the mx53_smd_android configNitin Garg
Update the u-boot config for mx53 smd android to include the correct boot env, enable boot splash, increase the cmdline buffer, tokens and 1G DDR. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
2012-10-17ENGR00229931 Support for Solo configuration on ARD platformAlejandro Sierra
Added support for Solo configuration on ARD platform. This support was replaced by DL configuration, however it was added again to emulate or use Solo chip on ARD platform. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-10-16ENGR00229711 Add weim-nor argument on uboot config Quad/DLAlejandro Sierra
Missing argument "weim-nor" on uboot configuration to boot from NOR. Quad/DL Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-10-16ENGR00229709 Support 2 processors at Linux bootAlejandro Sierra
Remove argument "nosmp" to support dual processor configuration on Linux. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-10-16ENGR00229817: i.mx6dl/mx6solo_sabresd_config: fix the build issueJason Liu
This patch fixed the following build issue: mx6q_sabresd.c:1382: undefined reference to `imx_pwm_config' mx6q_sabresd.c:1383: undefined reference to `imx_pwm_enable' And also removed the extra '_' in the config name. Signed-off-by: Jason Liu <r64343@freescale.com>
2012-10-12ENGR00229456 Support for 64bit DDR configuration for ARDAlejandro Sierra
Added support for 64bit DDR configuration on DL chip. On ARD platform Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-10-12ENGR00227413 Change configuration file names on AIAlejandro Sierra
Change configuration file names for AI platform. From solo to DL. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-10-11ENGR00228238 i.mx6/i.mx6dl: sabresd: add solo-ddr32bit supportJason Liu
This patch adds the solo-ddr32bit config support. The DDR script got from: http://compass.freescale.net/livelink/livelink/227589697/ MX6DL_init_DDR3_400MHz_32bit_For_SD_1.0.inc.txt?func=doc.Fetch&nodeid=227589697 Signed-off-by: Jason Liu <r64343@freescale.com>
2012-09-27ENGR00223794 MX6 SabreSD:Enable LVDS panel pwm backlightLiu Ying
This patch enables pwm backlight for LVDS panel and stops using gpio backlight to align with kernel to avoid unstable backlight when booting into kernel, as kernel usually uses pwm backlight instead of gpio backlight. Following items are done to support this: 1) Add PWM1 and PWM2 controller base addresses. 2) Change PIN SD1_DAT3 mux from GPIO to PWM1_PWMO. 3) Set default backlight density to 50%. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
2012-09-26ENGR00226048 Fix weim nor for mfg toolAlejandro Sierra
Weim interface share pins with I2C. A define was declared to enable weim pins and disable I2C when mfg tool is used. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-09-24ENGR00225691 NAND support on i.MX6Solo ARDAlejandro Sierra
NAND support on i.MX6Solo ARD. Two files were added. mx6solo_sabreauto_nand.h --> bootloader's image mx6solo_sabreauto_nand_mfg.h --> mfg tool bootloader Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-09-21ENGR00225486 Support for spi-nor bootAlejandro Sierra
Support for spi-nor boot with valid "extra_env_settings". It used to be the same as the SD Card boot, however it couldn't read/write the env settings because the CONFIG_FSL_ENV_IN_MMC was set instead of CONFIG_FSL_ENV_IN_SF. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-09-14ENGR00224313:i.MX6 general:enable CONFIG_CMD_IMXOTP to fix the build errorEric Sun
Commit 7942886(ENGR00221503-2 imx6: add cpu serial number support) introduces dependency on "CONFIG_SERIAL_TAG" and "CONFIG_CMD_IMXOTP". On U-boot configuration header files which only defines the first one, build error will be met. --- build error message --- arm_cortexa8/mx6/libmx6.a(generic.o): In function `get_board_serial': arm_cortexa8/mx6/generic.c:1438: undefined reference to `imx_otp_read_one_u32' arm_cortexa8/mx6/generic.c:1439: undefined reference to `imx_otp_read_one_u32' --------------------------- To fix it, add missing "CONFIG_CMD_IMXOTP" macro definition in the config head file. Configs affected are: --------------------------- mx6q_arm2_iram mx6q_sabresd_iram mx6dl_arm2_iram mx6sl_arm2_iram mx6sl_evk_iram Signed-off-by: Eric Sun <jian.sun@freescale.com>
2012-09-14ENGR00224291:i.MX6Q/ARM2-LPDDR2:enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu
Need enable CONFIG_CMD_IMXOTP to fix the build error: arm_cortexa8/mx6/generic.c:1438: undefined reference to `imx_otp_read_one_u32' arm_cortexa8/mx6/generic.c:1439: undefined reference to `imx_otp_read_one_u32' Signed-off-by: Jason Liu <r64343@freescale.com>
2012-09-14ENGR00224272: MFG:i.mx6q/ARM2 enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu
Need enable CONFIG_CMD_IMXOTP to fix the build error: arm_cortexa8/mx6/generic.c:1438: undefined reference to `imx_otp_read_one_u32' arm_cortexa8/mx6/generic.c:1439: undefined reference to `imx_otp_read_one_u32' Signed-off-by: Jason Liu <r64343@freescale.com>
2012-09-13ENGR00223788 mx6sl_evk: change boot args to boot from mmc/sdRobby Cai
default setting is to boot via nfs. By this way, after mfgtool burned the whole image on EVK, the system will probably not load the Linux kernel if the network is not correctly set or not availabe for it. Change to mmc/sd boot to make sure an entire boot process can be completed, in order to easily verify mfgtool. Signed-off-by: Robby Cai <R63905@freescale.com>
2012-09-11ENGR00223027 Add support for nand on MFG for IMX6QAlejandro Sierra
Add support for nand flash on IMX6Q. Modifying partitions number and size. mx6q_sabreauto_nand_boot.h --> Modify the size of partitions used to 3. PARTITION 0 (16M) ------------------------------ | | | uboot | | | ------------------------------ PARTITION 1 (16M) ------------------------------ | | | Kernel | | | ------------------------------ PARTITION 2 (128M) ------------------------------ | | | | | Root file system | | | | | ------------------------------ mx6q_sabreauto_mfg_enable_nand.h --> Enable partitions on manufacturing tool Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-09-06ENGR00222170: Add mx6sl_evk_android_config for mx6sl evk boardLiGang
- mx6sl_evk_android.h is a new file, copied from mx6sl_arm2_android.h - set default sdio port as mmc1 Signed-off-by: LiGang <b41990@freescale.com>
2012-08-31ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing
add cpu serial number tag, kernel will read this number and put it in /proc/cpuinfo, as 'Serial' part it can be used as a UUID source in software. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
2012-08-30ENGR00222005 mfgtool can't work on mx6slTony LIU
- for arm2 board, the I2C module is not defined in mfg config - and a new config file for evk board - change some prompt information Signed-off-by: Tony LIU <junjie.liu@freescale.com>
2012-08-29ENGR00219316-1: mx6 sabreauto: enable mxc_gpio supportAdrian Alonso
* Enable mxc_gpio support in order to configure steer logic circuits so attached pads can be used by dedicated IP modules I2C3, SPI-NOR, WEIM-NOR. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2012-08-24ENGR00221332: U_BOOT: remove "boot" and "enable" from configs' nameTerry Lv
Remove "boot" and "enable" from some configs' name. Affacted configs: mx6q_sabreauto_boot_weimnor mx6q_sabreauto_mfg_enable_weimnor mx6solo_sabreauto_boot_weimnor mx6solo_sabreauto_mfg_enable_weimnor mx6q_sabreauto_mfg_enable_spi-nor mx6solo_sabreauto_mfg_enable_spi-nor mx6q_sabreauto_nand_boot Currently, various u-boot are built in nightlybuild, to make it easier, we naming u-boot binary name and config as <soc_name>_<board_type>_<ddr_type>_<boot_device>. Then it is easier to be parsed, also easier to be maintained in nightlybuild and u-boot git. Signed-off-by: Terry Lv <r65388@freescale.com>
2012-08-22ENGR00221150 Support spi-nor on manufacturing toolAlejandro Sierra
Two configuration files were included to suppoort spi-nor on the manufacturing tool. Basically these files send the parameter "spi-nor" to the kernel, so the SPI interface can be setup. Files included are: mx6q_sabreauto_mfg_enable_spi-nor.h --> For Quad mx6solo_sabreauto_mfg_enable_spi-nor.h --> For solo Signed-off-by: Alejandro Sierra <b18039@freescale.com>
2012-08-21ENGR00220824: mx6sl_evk: mmc: only SD1 supports 8bit on evk board.Ryan QIAN
- configure SD1 to support 8bit on evk Signed-off-by: Ryan QIAN <b32804@freescale.com>
2012-08-21ENGR00180538-1 MFG download burn sd,spi, nand, nor failed.Francisco Munoz
Added two new board files for Solo and Quad which allow uboot to be booted from WEIM NOR. Also amended the word “weim-nor” in both mfg configuration files which allow to erase/write u-boot and uImage in Parallel nor using the mfg tool. Lastly just added a label in the regular board files indicating that another config file has to be used in the case of NOR boot. Modified files: Makefile common/env_common.c include/configs/mx6q_sabreauto.h include/configs/mx6q_sabreauto_boot_weimnor.h include/configs/mx6q_sabreauto_mfg_enable_weimnor.h include/configs/mx6solo_sabreauto.h include/configs/mx6solo_sabreauto_boot_weimnor.h include/configs/mx6solo_sabreauto_mfg_enable_weimnor.h Signed-off-by: Francisco Munoz <francisco.munoz@freescale.com>
2012-08-20ENGR00217505-1 uboot: MX6Q-ARD: add a NAND boot configHuang Shijie
add a new config for NAND boot in the mx6q-ard board. Signed-off-by: Huang Shijie <b32955@freescale.com>
2012-08-14ENGR00220161: imx6sl: Add MX6SL EVK SupportRobby Cai
Add mx6sl evk board support - copied from ARM2 board support - added a new board revision - removed unused boot device detection Signed-off-by: Robby Cai <R63905@freescale.com>
2012-08-09ENGR00219854-1 Enable fastboot feature on mx6q-arm2 boardLiGang
1. enable fastboot feature on mx6q-arm2 board 2. enlarge fastboot buffer to 320MB 3. correct some usb descriptors Signed-off-by: LiGang <b41990@freescale.com>
2012-08-07ENGR00219636 MX6 UBOOT : Enlarge command line buffer sizeEric Sun
There is a problem that a too long command line parameter in U-Boot console will actually be truncated and not properly truncated to the kernel. The root cause is that the command line in the U-Boot console is read into a buffer --- console_buffer[CONFIG_SYS_CBSIZE]. Currently the CONFIG_SYS_CBSIZE is set as 256. Command line parameter larger than it will not be recorded. On the other hand, max length of boot parameter of linux kernel is set to 1024, which means it can accept parameter size as large as 1024. So we need to align these 2 values. Enlarge CONFIG_SYS_CBSIZE to 1024 as well. Signed-off-by: Eric Sun <jian.sun@freescale.com>
2012-07-31ENGR00218583-5 MX6DL SabreSD Android:Add splashimage uboot varLiu Ying
This patch adds splashimage related variables to board configure file so that splashimage can work without touching the uboot variables. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
2012-07-31ENGR00218583-4 MX6Q SabreSD Android:Add splashimage uboot varLiu Ying
This patch adds splashimage related variables to board configure file so that splashimage can work without touching the uboot variables. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-14 01:43:22 +0000