summaryrefslogtreecommitdiff
path: root/include/configs/db-88f6820-gp.h
AgeCommit message (Collapse)Author
2015-07-24arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot supportStefan Roese
This patch adds the configuration options to boot via SDIO/MMC on the Marvell DB-88F6820-GP Armada A38x board. The default boot device is still SPI NOR flash. To enable MMC booting on this board 2 things need to be changes: a) Change kwbimage.cfg BOOT_FROM sdio b) In the config header select #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD The generated image needs to be copied to the first bootable MMC partition: dd if=u-boot-spl.kwb of=/dev/sdX1 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
2015-07-23arm: mvebu: db-88f6820: Add SPL support with DDR init codeStefan Roese
This patch adds SPL support for the Marvell DB-88F6820-GP board. With this change, the bin_hdr from the original Marvell U-boot is not needed any more on this board. The sources from bin_hdr (SERDES/PHY and DDR setup) are now integrated in mainline U-Boot. And this patch enables them for this board. Signed-off-by: Stefan Roese <sr@denx.de>
2015-07-10arm: mvebu: db-88f6820-gp: Add USB/EHCI supportStefan Roese
This patch enabled the USB/EHCI support for the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10arm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) supportStefan Roese
Configure and enable the SATA/SCSI (AHCI) support for the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38xStefan Roese
This patch adds support for the common AHCI controller on the Marvell Armada 38x. Tested on the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10arm: mvebu: db-88f6820-gp: Add MMC/SDIO supportStefan Roese
This patch adds MMC/SDIO support to the Marvell DB-88F6820-GP board configuration. Including support for the common partitions and filesystems. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-06-28db-88f6820-gp.h: Load data blobs into lower memoryKevin Smith
By default on this platform, u-boot loads data into high memory in the range of 0x7Fxxxxxx, which generates a data abort when the kernel tries to read it. Config the u-boot environment to load the device tree and initrd image into lower memory to make them accessible to the kernel. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de>
2015-06-25Move defaults from config_cmd_default.h to KconfigJoe Hershberger
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-05-05arm: mvebu: Add Armada A38x DB-88F6820-GP board supportStefan Roese
This patch adds support for the Marvell DB-88F6820-GP Armada A38x evaluation board. Supported peripherals are: - UART - Ethernet (mvneta) - I2C - SPI (including SPI NOR flash) Please note that this board support right now only supports the main U-Boot. Without the bin_hdr integration (DDR training etc). This will be added in a few days / weeks to complete this board port. But till then this U-Boot version can be run on the target via the original Marvell U-Boot via this command: tftpboot 4000000 db-88f6820-gp/u-boot.bin;go 4000000 Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>