summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-06-23UBI: initialise update markerPeter Horton
UBI: initialise update marker The in kernel copy of a volume's update marker is not initialised from the volume table. This means that volumes where an update was unfinnished will not be treated as "forbidden to use". This is basically that the update functionality was broken. Signed-off-by: Peter Horton <zero@colonel-panic.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Stefan Roese <sr@denx.de>
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-06-17Add Orion5x support to 16550 device driverAlbert Aribaud
This patch provides access to the 16550-compatible serial device of the Orion5x SoC. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-06-14s5pc1xx: gpio: bug fix at gpio_set_pull functionMinkyu Kang
When set to PULL_NONE, gpio_set_pull function is returned without write the register. This patch fixed it. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-06-08DaVinci: Improve DaVinci SPI speed.Delio Brignoli
I have updated this patch based on the comments [1] by Wolfgang Denk and removed unused variables. [1][http://lists.denx.de/pipermail/u-boot/2010-May/071728.html] Reduce the number of reads per byte transferred on the BUF register from 2 to 1 and take advantage of the TX buffer in the SPI module. On LogicPD OMAP-L138 EVM, SPI read throughput goes up from ~0.8Mbyte/s to ~1.3Mbyte/s. Tested with a 2Mbyte image file. Remove unused variables in the spi_xfer() function. Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-05-28Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk
2010-05-28spi: add altera spi controller supportThomas Chou
This patch adds the driver of altera spi controller, which is used as epcs/spi flash controller. It also works with mmc_spi driver. This driver support more than one spi bus, with base list declared #define CONFIG_SYS_ALTERA_SPI_LIST { BASE_0,BASE_1,... } Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28misc: add gpio based status led driverThomas Chou
This patch adds a status led driver followed the GPIO access conventions of Linux. The led mask is used to specify the gpio pin. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-26Blackfin: nand: drain the write buffer before returningAndrew Caldwell
The current Blackfin nand write function fills up the write buffer but returns before it has had a chance to drain. On faster systems, this isn't a problem as the operation finishes before the ECC registers are read, but on slower systems the ECC may be incomplete when the core tries to read it. So wait for the buffer to drain once we're done writing to it. Signed-off-by: Andrew Caldwell <Andrew.Caldwell@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-26Coding style cleanup, update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-26dm9000x.c: fix compile problemsWolfgang Denk
Use readX() / writeX() accessors instead of inX() / outX(). Suggested-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-21Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk
2010-05-21Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk
2010-05-19UBI: Ensure that "background thread" operations are really executedStefan Roese
The current U-Boot UBI implementation is copied from Linux. In this porting the UBI background thread was not handled correctly. Upon write operations ubi_wl_flush() makes sure, that all queued operations, like page-erase, are completed. But this is missing for read operations. This patch now makes sure that such operations (like scrubbing upon bit-flip errors) are not queued, but executed directly. Signed-off-by: Stefan Roese <sr@denx.de>
2010-05-19MX31: Added support for the Casio COM57H5M10XRC to QONGStefano Babic
The patch adds setup to connect a CASIO COM57H5M10XRC (640x480 TFT display) to the QONG module. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-17lan91c96, smc911x: remove useless free(ptr) calls on NULL ptrSerge Ziryukin
Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com>
2010-05-17Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-05-15drivers/mmc/fsl_esdhc.c: fix compiler warningsWolfgang Denk
Commit 77c1458d caused the following compiler warnings: fsl_esdhc.c: In function 'esdhc_pio_read_write': fsl_esdhc.c:142: warning: assignment discards qualifiers from pointer target type fsl_esdhc.c: In function 'esdhc_setup_data': fsl_esdhc.c:169: warning: unused variable 'wml_value' fsl_esdhc.c: In function 'esdhc_pio_read_write': fsl_esdhc.c:164: warning: control reaches end of non-void function Fix these. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Dipen Dudhat <dipen.dudhat@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
2010-05-1285xx/fsl-sata: Use is_serdes_configured() to determine if SATA is enabledKumar Gala
On the MPC85xx platform if we have SATA its connected on SERDES. Determing if SATA is enabled via sata_initialize should not be board specific and thus we move it out of the MPC8536DS board code. Additionally, now that we have is_serdes_configured() we can determine if the given SATA port is enabled and error out if its not in the driver. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-06Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk
2010-05-06drivers/*/Makefile: fix conditional compile rule.Ender.Dai
Fix conditional compile rule for twl4030.c and videomodes.c. Signed-off-by: Ender.Dai <ender.dai@gmail.com>
2010-05-06SERIAL: Enable port-mapped accessGraeme Russ
The x86 architecture exclusively uses Port-Mapped I/O (inb/outb) to access the 16550 UARTs. This patch mimics how Linux selects between Memory-Mapped and Port-Mapped I/O. This allows x86 boards to use CONFIG_SERIAL_MUTLI and drop the custom serial port driver Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05Blackfin: TWI/I2C: implement multibus supportMike Frysinger
In order to do this cleanly, the register accesses have to be converted to a C struct (base pointer), so do that in the process. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-05SPI: added support for MX51 to mxc_spiStefano Babic
This patch add SPI support for the MX51 processor. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-05MX: RTC13783 uses general function to access PMICStefano Babic
The RTC is part of the Freescale's PMIC controller. Use general function to access to PMIC internal registers. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-05-05MX: Added Freescale Power Management DriverStefano Babic
The patch add supports for the Freescale's Power Management Controller (known as Atlas) used together with i.MX31/51 processors. It was tested with a MC13783 (MX31) and MC13892 (MX51). Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-05-03Blackfin: bfin_mac: hook up new write_hwaddr functionMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: ethoc: add write_hwaddr supportThomas Chou
Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: altera_tse: add write_hwaddr supportThomas Chou
Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: fec_mxc: add write_hwaddr supportHeiko Schocher
tested on the magnesium board. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net:kirkwood_egiga.c: MAC addresses programming using write_hwaddrPrafulla Wadaskar
Added a new function kwgbe_write_hwaddr for programming egiga controller's hardware address. This function will be called for each egiga port being used Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: add altera triple speeds ethernet mac driverThomas Chou
This driver supports the Altera triple speeds 10/100/1000 ethernet mac. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: add opencore 10/100 ethernet mac driverThomas Chou
This patch ports the opencore 10/100 ethernet mac driver ethoc.c from linux kernel to u-boot. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03smc911x driver frame alignment patchValentin Yakovenkov
SMSC911x chips have alignment function to allow frame payload data (which comes after 14-bytes ethernet header) to be aligned at some boundary when reading it from fifo (usually - 4 bytes boundary). This is done by inserting fake zeros bytes BEFORE actual frame data when reading from SMSC's fifo. This function controlled by RX_CFG register. There are bits that represents amount of fake bytes to be inserted. Linux uses alignment of 4 bytes. Ethernet frame header is 14 bytes long, so we need to add 2 fake bytes to get payload data aligned at 4-bytes boundary. Linux driver does this by adding IP_ALIGNMENT constant (defined at skb.h) when calculating fifo data length. All network subsystem of Linux uses this constant too when calculating different offsets. But u-boot does not use any packet data alignment, so we don't need to add anything when calculating fifo data length. Moreover, driver zeros the RX_CFG register just one line up, so chip does not insert any fake data at the beginig. So calculated data length is always bigger by 1 word. It seems that at almost every packet read we get an underflow condition at fifo and possible corruption of data. Especially at continuous transfers, such as tftp. Just after removing this magic addition, I've got tftp transfer speed as it aught to be at 100Mbps. It was really slow before. It seems that fifo underflow occurs only when using byte packing on 32-bit blackfin bus (may be because of very small delay between reads). Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: Kirkwood_egiga.c bugfixes for rx pathPrafulla Wadaskar
Cosmetic changes: Few comments updated Functionality: Rx packet frame size is programming should be done when port is in disabled state. this is corrected Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03fec_mxc.c: Fix MX27 FEC MAC validity checkEric Jarrige
Fix MX27 FEC logic to check validity of the MAC address in fuse. Only null (empty fuse) or invalid MAC address was retrieved from mx27 fuses before this change. Signed-off-by: Eric Jarrige <jorasse@armadeus.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03tsec: Wait for both RX and TX to stopAndy Fleming
When gracefully stopping the controller, the driver was continuing if *either* RX or TX had stopped. We need to wait for both, or the controller could get into an invalid state. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: dm9000x: use standard I/O accessorsMike Frysinger
The current dm9000x driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on Blackfin systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03mpc512x_fec: Move PHY initialization from probe into init routine.Detlev Zundel
This saves the autonegotation delay when not using ethernet in U-Boot Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03fec_mxc don't use internal eeprom on MX25John Rigby
Avoid using the internal eeprom on MX25 like MX51 already does. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03fix lockup in mcfmii/mii_discover_phy() in case communication failsWolfgang Wegner
Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-0383xx: UEC: Added support for bitBang MII driver access to PHYsRichard Retanubun
This patch enabled support for having PHYs on bitBang MII and uec MII operating at the same time. Modeled after the MPC8360ADS implementation. Added the ability to specify which ethernet interfaces have bitbang SMI on the board header file. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03Remove unused "local_crc32" function.Detlev Zundel
For code archeologists, this is a nice example of copy and paste history. Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: Kirkwood_egiga.c: fixed build warningsPrafulla Wadaskar
This patch fixes following build warnings for kirkwood_egiga.c kirkwood_egiga.c: In function "kwgbe_init": kirkwood_egiga.c:448: warning: dereferencing type-punned pointer will break strict-aliasing rules kirkwood_egiga.c: In function "kwgbe_recv": kirkwood_egiga.c:609: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-04-30MX31: add accessor function to get a gpioStefano Babic
The patch adds an accessor function to get the value of a gpio. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30SAMSUNG: make s5p common gpio functionsMinkyu Kang
Because of s5pc1xx gpio is same as s5p seires SoC, move gpio functions to drvier/gpio/ and modify structure's name from s5pc1xx_ to s5p_. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-30SAMSUNG: serial: modify name from s5pc1xx to s5pMinkyu Kang
Because of other s5p series SoC will use these serial functions, modify function's name and structure's name. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-27MX31: Added LCD support for QONG moduleStefano Babic
Added support for LCD and splash image to the QONG module. The supported display is VBEST-VGG322403. Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-26 01:08:53 +0000