summaryrefslogtreecommitdiff
path: root/drivers/mmc/mmc.c
AgeCommit message (Expand)Author
2019-03-19MLK-21176 mmc: correct the HS400 initialization processHaibo Chen
2019-03-19mmc: Do not poll using CMD13 when changing timingMarek Vasut
2019-03-19mmc: Add support for downgrading HS200/HS400 to HS modeMarek Vasut
2018-08-12MLK-19200-2 Revert "Add iMX8DX DDR3 arm2 board support"Ye Li
2018-08-10Add iMX8DX DDR3 arm2 board supportYe Li
2018-04-27MLK-18161-15 mmc: Add HS400 Enhanced Strobe mode supportYe Li
2018-04-27MLK-18149-1 mmc: add HS400 supportPeng Fan
2018-04-27MLK-18148 mmc: fix return value check conditionPeng Fan
2018-02-23mmc: fix off-by-one bug in mmc_startup_v4()Alexander Kochetkov
2018-02-23mmc: Drop unnecessary case for mmc_probe()Faiz Abbas
2018-02-21mmc: synchronize the sequence with enum bus_mode in mmc.hJaehoon Chung
2018-02-19mmc: fix bug in mmc_startup_v4()Jean-Jacques Hiblot
2018-02-19mmc: Fix bug in sd_set_card_speed()Jean-Jacques Hiblot
2018-02-19mmc: use pr_* log functionsMasahiro Yamada
2018-01-24mmc: Poll for broken card detection caseJun Nie
2018-01-24mmc: fix to assign to correct clock value when clock is enablingJaehoon Chung
2018-01-22mmc: fix the wrong disabling clockJaehoon Chung
2018-01-12mmc: remove hc_wp_grp_size from struct mmc if not neededJean-Jacques Hiblot
2018-01-12mmc: don't read the size of eMMC enhanced user data area in SPLJean-Jacques Hiblot
2018-01-12mmc: compile out erase and write mmc commands if write operations are not ena...Jean-Jacques Hiblot
2018-01-12mmc: read ssr only if MMC write support is enabledJean-Jacques Hiblot
2018-01-12mmc: reworked version lookup in mmc_startup_v4Jean-Jacques Hiblot
2018-01-12mmc: compile out more code if support for UHS and HS200 is not enabledJean-Jacques Hiblot
2018-01-12mmc: make optional the support for eMMC hardware partitioningJean-Jacques Hiblot
2018-01-12mmc: make UHS and HS200 optionalJean-Jacques Hiblot
2018-01-12mmc: convert most of printf() to pr_err() and pr_warn()Jean-Jacques Hiblot
2018-01-12mmc: don't use malloc_cache_aligned()Jean-Jacques Hiblot
2018-01-12mmc: fix for old MMCs (below version 4)Jean-Jacques Hiblot
2018-01-12mmc: all hosts support 1-bit bus width and legacy timingsJean-Jacques Hiblot
2018-01-12mmc: Fixed a problem with old sd or mmc that do not support High speedJean-Jacques Hiblot
2018-01-12mmc: dump card and host capabilities if debug is enabledJean-Jacques Hiblot
2018-01-12mmc: add a library function to send tuning commandJean-Jacques Hiblot
2018-01-12mmc: use the right voltage level for MMC DDR and HS200 modesJean-Jacques Hiblot
2018-01-12mmc: Retry some MMC cmds on failureKishon Vijay Abraham I
2018-01-12mmc: Change mode when switching to a boot partitionJean-Jacques Hiblot
2018-01-12mmc: disable UHS modes if Vcc cannot be switched on and offJean-Jacques Hiblot
2018-01-12mmc: Add support for UHS modesJean-Jacques Hiblot
2018-01-12mmc: add HS200 support in MMC coreKishon Vijay Abraham I
2018-01-12mmc: Add a execute_tuning() callback to the mmc operations.Kishon Vijay Abraham I
2018-01-12mmc: disable the mmc clock during power offKishon Vijay Abraham I
2018-01-12mmc: add a new mmc parameter to disable mmc clockKishon Vijay Abraham I
2018-01-12mmc: add power cyle support in mmc coreKishon Vijay Abraham I
2018-01-12mmc: Add a new callback function to perform the 74 clocks cycle sequenceJean-Jacques Hiblot
2018-01-12mmc: Enable signal voltage to be selected from mmc coreKishon Vijay Abraham I
2018-01-12mmc: make mmc_set_ios() return statusKishon Vijay Abraham I
2018-01-12mmc: refactor MMC startup to make it easier to support new modesJean-Jacques Hiblot
2018-01-12mmc: refactor SD startup to make it easier to support new modesJean-Jacques Hiblot
2018-01-12mmc: use mmc modes to select the correct bus speedJean-Jacques Hiblot
2018-01-12mmc: Add a function to dump the mmc capabilitiesJean-Jacques Hiblot
2018-01-12mmc: introduce mmc modesJean-Jacques Hiblot
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-28 06:33:13 +0000