summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2022-04-05Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
A big part is the DM pinctrl driver, which allows us to get rid of quite some custom pinmux code and make the whole port much more robust. Many thanks to Samuel for that nice contribution! There are some more or less cosmetic warnings about missing clocks right now, I will send the trivial fixes for that later. Another big chunk is the mkimage upgrade, which adds RISC-V and TOC0 (secure images) support. Both features are unused at the moment, but I have an always-secure board that will use that once the DT lands in the kernel. On top of those big things we have some smaller fixes, improving the I2C DM support, fixing some H6/H616 early clock setup and improving the eMMC boot partition support. The gitlab CI completed successfully, including the build test for all 161 sunxi boards. I also boot tested on a A64, A20, H3, H6, and F1C100 board. USB, SD card, eMMC, and Ethernet all work there (where applicable).
2022-04-04i2c: sun8i_rsb: Add support for DM clocks and resetsSamuel Holland
Currently, clock/reset setup for this device is handled by a platform-specific function and is intermixed with non-DM pinctrl setup. Use the devicetree to get clocks/resets, which disentagles it from the pinctrl setup in preparation for moving to DM_PINCTRL. This also has the added benefit of picking the right clock/reset bits for H6 and new SoCs that have a rearranged PRCM MMIO space. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04i2c: sun8i_rsb: Initialize chips in .child_pre_probeSamuel Holland
Chips attached to the RSB bus require an initialization command before they can be used. (Specifically, this command programs the chip's runtime address.) The driver does this in its .probe_chip hook, under the assumption that .probe_chip is called during child probe. This is not the case; .probe_chip is only called by dm_i2c_probe, which is intended for use by board-level code, not for chips with OF nodes. Since this initialization command must be run before a child chip can be used, do it before probing each child. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04i2c: sun6i_p2wi: Add support for DM clocks and resetsSamuel Holland
Currently, clock/reset setup for this device is handled by a platform-specific function and is intermixed with non-DM pinctrl setup. Use the devicetree to get clocks/resets, which disentagles it from the pinctrl setup in preparation for moving to DM_PINCTRL. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04i2c: sun6i_p2wi: Initialize chips in .child_pre_probeSamuel Holland
Chips attached to the P2WI bus require an initialization command before they can be used. (Specifically, this switches the chip from I2C mode to P2WI mode.) The driver does this in its .probe_chip hook, under the assumption that .probe_chip is called during child probe. This is not the case; .probe_chip is only called by dm_i2c_probe, which is intended for use by board-level code, not for chips with OF nodes. Since this initialization command must be run before a child chip can be used, do it before probing each child. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2CSamuel Holland
When the DM_I2C driver is loaded, the pin setup is done automatically from the device tree by the pinctrl driver. Clean up the code in the process: remove #ifdefs and recognize that the pin configuration is the same for all sun8i/sun50i SoCs, not just those which select CONFIG_MACH_SUN8I. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04i2c: sun6i_p2wi: Only do non-DM pin setup for non-DM I2CSamuel Holland
When the DM_I2C driver is loaded, the pin setup is done automatically from the device tree by the pinctrl driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-03-28Merge tag 'v2022.04-rc5' into nextTom Rini
Prepare v2022.04-rc5
2022-03-23i2c: fix always-true condition in i2c_probe_chip()Nikita Yushchenko
Per dm_i2c_ops.probe_chip documentation, i2c_probe_chip() shall fallback to default probe method when .probe_chip() returns -ENOSYS. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2022-03-09i2c: i2c-cdns: Prevent early termination of writeSai Pavan Boddu
During sequential loading of data, hold the bus to prevent controller from sending stop signal in case no data is available in fifo. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2407b39d305999cb42438c5423aebc3b514acabb.1646122610.git.michal.simek@xilinx.com
2022-03-09i2c: i2c-cdns: Fix write transaction stateSai Pavan Boddu
Start write transfer after loading data to FIFO. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f0b3e443daa7758e00dfdcc245cf6b2120b0e907.1646122610.git.michal.simek@xilinx.com
2022-03-09i2c: i2c-cdns: Start read transaction after write to transfer_size regSai Pavan Boddu
Avoid a race condition where read transaction is started keeping expected bytes as 0. Which sometimes would result in sending STOP signal as no data is expected. Observed on QEMU platform. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/487c8026791bfd60719403a2df2c54bb0ae99232.1646122610.git.michal.simek@xilinx.com
2022-02-21ti: i2c: fix probe_chip() return valueNikita Yushchenko
Per documentation, dm_i2c_ops.probe_chip() shall return -EREMOTEIO if probe fails. Currently, omap_i2c_probe_chip() returns 1 instead. Fix that. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2022-02-01i2c: muxes: pca954x: add PCA9847 variantVladimir Oltean
This seems to be very similar to the already existing PCA9547, save for the fact that it supports 0.8V and doesn't support 5V. In fact, it is so similar to the PCA9547 that the NXP LS1028A-RDB board has been driving this chip using a "nxp,pca9547" compatible string. Create a new compatible for the PCA9847 (which is the same as in Linux) and define the same operating parameters for it as for PCA9547. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Michael Walle <michael@walle.cc>
2022-01-30i2c: mvtwsi: Add compatible string for allwinner, sun4i-a10-i2cChris Morgan
This adds a compatible string for the Allwinner Sun4i-A10 I2C controller. Without this, boards based on the R8 and A13 (at a minimum) fail to boot. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Akash Gajjar <gajjar04akash@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-19doc: replace @return by Return:Heinrich Schuchardt
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-13i2c: at91: add compatible with microchip,sam9x60-i2cEugen Hristev
Add compatible and data platform struct for sam9x60 SoC. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-12-27Convert CONFIG_SYS_IMMR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_IMMR We do this by consolidating the SYS_IMMR options we have and providing defaults. We also, in the few places where M68K was also sharing code with these platforms, define it within the file to CONFIG_SYS_MBAR to match usage. This should be cleaned up longer term. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-20i2c: mvtwsi: Swab the register address if its size is > 1Stefan Roese
Testing on Armada XP with an EEPROM using register address with size of 2 has shown, that the register address bytes are sent to the I2C EEPROM in the incorrect order. This patch swabs the address bytes so that the correct address is transferred to the I2C device. BTW: This worked without any issues before migrating Armada XP to DM I2C. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Samuel Holland <samuel@sholland.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pali Rohár <pali@kernel.org> Cc: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
2021-12-02i2c: Add Microchip PolarFire SoC I2C driverPadmarao Begari
Add I2C driver code for the Microchip PolarFire SoC. This driver supports I2C data transfer and probe for I2C slave addresses. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek) - a37xx: pci: Misc smaller fixes (Pali) - cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven) - termios_linux.h: Fix tcsendbreak() implementation (Pali) - mvebu: Add missing "if SPL" (Tom)
2021-10-21arm: mvebu: a3720: Create Kconfig option for I2C_MVMarek Behún
Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-20i2c: ocores: Fix -Wint-to-pointer-cast warningBin Meng
The following warning is seen in ocores_i2c.c in a 32-bit build: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Change to use dev_read_addr_ptr(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12i2c: Add a DM_I2C driver for the sun8i RSB controllerSamuel Holland
This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12i2c: Add a DM_I2C driver for the sun6i P2WI controllerSamuel Holland
This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08i2c: stm32f7: compute i2cclk only one timePatrick Delaunay
Compute i2cclk only one time in stm32_i2c_compute_timing() and remove setup parameter (accessible in i2c_priv). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08i2c: stm32f7: add support for DNF i2c-digital-filter bindingPatrick Delaunay
Add the support for the i2c-digital-filter binding, allowing to enable the digital filter via the device-tree and indicate its value in the DT Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08i2c: stm32f7: fix configuration of the digital filterPatrick Delaunay
The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08i2c: stm32f7: support DT binding i2c-analog-filterPatrick Delaunay
Replace driver internally coded enabling/disabling of the analog-filter with the DT binding "i2c-analog-filter". Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08i2c: stm32f7: move driver data of each instance in a privdataPatrick Delaunay
Today all the I2C instance point on the same global variable stm32_i2c_setup according the compatible: i2c_priv->setup = pointer to the same driver data. This patch changes this driver data (stm32f7_setup and stm32mp15_setup) to a const struct and move the timing struct 'setup' as element of i2c privdata, initialized in stm32_ofdata_to_platdata() with the driver configuration data. This patch solves issues when several I2C instance have not the same clock source or not the same configuration: each timing setup is saved is the I2C privdata. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-28i2c: mvtwsi: Add support for DM clocks and resetsSamuel Holland
The controller may need to have clocks/resets enabled for it to work. Add support for this. Since the clocks/resets are optional on some platforms (per the device tree binding), do not prevent probing the controller if they are missing. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-09-28i2c: rcar_i2c: Enable configuring SCL rise and fall timesAdam Ford
The Linux i2c driver supports i2c-scl-rising-time-ns, and i2c-scl-falling-time-ns, but U-Boot uses hard-coded values for these values. Update the calculation by fetching them from the device tree if present and use the previous values as the default if they are missing. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-09-25treewide: Use OF_REAL instead of !OF_PLATDATASimon Glass
Now that we have a 'positive' Kconfig option, use this instead of the negative one, which is harder to understand. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: Simply conditions with the new OF_REALSimon Glass
Use this new Kconfig to simplify the compilation conditions where appropriate. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-13pci: Drop DM_PCISimon Glass
This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-07riscv: Add missing sentinel in ocores_i2c.cThomas Skibo
The ocores_i2c.c driver is missing a sentinel at the end of the compatible strings list. This causes the "dm compat" command to spew garbage. Signed-off-by: Thomas Skibo <thomas-git@skibo.net> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: fsl_i2c: Migrate to KconfigTom Rini
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30rcar: i2c: Migrate SYS_I2C_SH to KconfigTom Rini
- Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: Remove non-DM code from ihs_i2c.cTom Rini
This driver and it's only user are converted to DM_I2C, remove legacy code. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespaceTom Rini
The omap24xx I2C driver uses its own CONFIG namespace for common I2C variables. Rather than convert more of them to Kconfig, rename these to the common I2C ones and remove the entirely unused functionality. As part of this, we make the am335x_shc platforms consistent with their intended speed values. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: designware: Remove unused non-DM functionalityTom Rini
There are no users of more than 1 i2c bus in the non-DM case currently. Remove the additional defines for this. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_EARLY_INIT to KconfigTom Rini
Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on SPL_SYS_I2C_LEGACY. Remove the weak implementation as it's either something that needs to exist for real, or shouldn't be called. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-19 05:49:18 +0000