summaryrefslogtreecommitdiff
path: root/drivers/gpio/Makefile
AgeCommit message (Collapse)Author
2019-07-12gpio: stm32: Rename stm32f7_gpio to stm32_gpioPatrice Chotard
As this driver is used on stm32f4/f7/h7 and stm32mp1 SoCs, rename it with a more generic name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-07gpio: renesas: Add RZ/A1 R7S72100 GPIO driverMarek Vasut
Add GPIO driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-01-28gpio: introduce CONFIG_SPL_DM_PCA953XPeng Fan
Introduce CONFIG_SPL_DM_PCA953X for SPL usage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-16mips: gpio: mscc: Obsoleted gpio-mscc-bitbang-spi.cLars Povlsen
With the new mscc_bb_spi.c driver, there is no longer use for the gpio-mscc-bitbang-spi.c driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)Lars Povlsen
This add support for the the MSCC serial GPIO driver in MSCC VCoreIII-based SOCs. By using a serial interface, the SIO controller significantly extends the number of available GPIOs with a minimum number of additional pins on the device. The primary purpose of the SIO controller is to connect control signals from SFP modules and to act as an LED controller. This adds the base driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2018-12-19gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spiGregory CLEMENT
The VCore III SoCs such as the Luton but also the Ocelot can remap an SPI flash directly in memory. However, for writing in the flash the communication has to be done by software. Each of the signal used for the SPI are exposed in a single register. In order to be able to use the soft-spi driver, the management of this pin is done through this simple gpio driver. Even if the main purpose of this driver is to be used by soft-spi, it can still be used as a normal gpio driver but with limitation: for example the first pin can't be used as output. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18gpio: Add MT7621 GPIO supportStefan Roese
This patch adds GPIO support for the Mediatek MT7621 SoC, tested on MT7688 (Gardena smart-gateway). The driver is loosly based on the Linux kernel version. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed checkpatch.pl warnings: Prefer 'unsigned int' to bare use of 'unsigned'] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-28gpio: mpc8xxx: Rename Kconfig option, structures, and functionsMario Six
Rename the Kconfig option, structures (and their members), as well as functions of the mpc85xx driver to include mpc8xxx to reflect the more generic usage. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-28gpio: mpc85xx: Rename driver file to mpc8xxxMario Six
In preparation to making the MPC85xx GPIO driver useable for a broader range of SoCs, rename the driver file. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-10board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driverPatrice Chotard
Use available DM stm32f7_gpio.c and pinctrl_stm32.c drivers instead of board GPIO initialization. Remove stm32_gpio.c which is no more used and migrate structs stm32_gpio_regs and stm32_gpio_priv into arch-stm32f4/gpio.h to not break compilation. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-24ARC: HSDK: introduce CREG GPIO driverEugeniy Paltsev
The HSDK can manage some pins via CREG registers block. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-09-28gpio: rmobile: Add Renesas RCar GPIO driverMarek Vasut
Add GPIO driver for the Renesas RCar SoCs . The driver currently supports only the RCar Gen3 R8A7795 and R8A7796 SoCs, but is easily extensible for the other RCar SoCs as well. This driver is meant to replace the pinmux part of SH_GPIO_PFC driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-11gpio: Drop sx151x driverSimon Glass
This driver is not used in U-Boot. Drop it and its associated CONFIG options. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-05gpio: samsung: Drop s3c2440_gpio driverSimon Glass
This is no longer used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-10dm: gpio: add BCM6345 gpio driverÁlvaro Fernández Rojas
This driver is based on linux/arch/mips/bcm63xx/gpio.c, simplified to allow defining one or two independent banks for each Broadcom SoC. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08dm: gpio: Add driver for stm32f7 gpio controllerVikas Manocha
This patch adds gpio driver supporting driver model for stm32f7 gpio. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Christophe KERELLO <christophe.kerello@st.com> [trini: Add depends on STM32] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-17gpio: Add Rapid GPIO2P driver for i.MX7ULPPeng Fan
Add the imx_rgpio2p driver for Rapid GPIO2P controllers on i.MX7ULP. Have added all ports on RGPIO2P_0 and RGPIO2P_1. The configurations CONFIG_IMX_RGPIO2P and CONFIG_DM_GPIO must be set to y to enable the drivers. To use the GPIO function, the IBE and OBE needs to set in IOMUXC. We did not set the bits in driver, but leave them to IOMUXC settings of the GPIO pins. User should use IMX_GPIO_NR to generate the GPIO number for gpio APIs access. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by : Stefano Babic <sbabic@denx.de>
2016-08-08gpio: Add driver for TI PCF8575 I2C GPIO expanderVignesh R
TI's PCF8575 is a 16-bit I2C GPIO expander.The device features a 16-bit quasi-bidirectional I/O ports. Each quasi-bidirectional I/O can be used as an input or output without the use of a data-direction control signal. The I/Os should be high before being used as inputs. Read the device documentation for more details[1]. This driver is based on pcf857x driver available in Linux v4.7 kernel. It supports basic reading and writing of gpio pins. [1] http://www.ti.com/lit/ds/symlink/pcf8575.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-06-04Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2016-06-03dm: gpio: Add driver for MPC85XX GPIO controllermario.six@gdsys.cc
This patch adds a driver for the built-in GPIO controller of the MPC85XX SoC (probably supporting other PowerQUICC III SoCs as well). Each GPIO bank is identified by its own entry in the device tree, i.e. gpio-controller@fc00 { #gpio-cells = <2>; compatible = "fsl,pq3-gpio"; reg = <0xfc00 0x100> } By default, each bank is assumed to have 32 GPIOs, but the ngpios setting is honored, so the number of GPIOs for each bank in configurable to match the actual GPIO count of the SoC (e.g. the 32/32/23 banks of the P1022 SoC). The usual functions of GPIO drivers (setting input/output mode and output value setting) are supported. The driver has been tested on MPC85XX, but it is likely that other PowerQUICC III devices will work as well. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-31gpio: add Tegra186 GPIO driverStephen Warren
Tegra186's GPIO controller register layout is significantly different from previous chips, so add a new driver for it. In fact, there are two different GPIO controllers in Tegra186 that share a similar register layout, but very different port mapping. This driver covers both. The DT binding is already present in the Linux kernel (in linux-next via the Tegra tree so far). Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # v1 Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-17dm: gpio: introduce 74x164 driverPeng Fan
Introduce driver to support "fairchild,74hc595" devices. 1. Take linux drivers/drivers/gpio/gpio-74x164.c as reference. 2. Following the naming used in Linux driver with gen_7x164 as the prefix. 3. Enable CONFIG_DM_74X164 to use this driver. 4. Follow Documentation/devicetree/bindings/gpio/gpio-74x164.txt to add device nodes 5. Tested on i.MX6 UltraLite with 74LV595 using gpio command and oscillograph. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Chin Liang See <clsee@altera.com> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: gpio: pca953x: introduce driver model support for pca953xPeng Fan
Introduce a new driver that supports driver model for pca953x. The pca953x chips are used as I2C I/O expanders. This driver is designed to support the following chips: " 4 bits: pca9536, pca9537 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, pca9556, pca9557, pca9574, tca6408, xra1202 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, tca6416 24 bits: tca6424 40 bits: pca9505, pca9698 " But for now this driver only supports max 24 bits and pca953x compatible chips. pca957x compatible chips are not supported now. These can be addressed when we need to add such support for the different chips. This driver has been tested on i.MX6 SoloX Sabreauto board with max7310 i2c expander using gpio command as following: =>gpio status -a Bank gpio@30_: gpio@30_0: input: 1 [ ] => dm tree: i2c [ ] | | `-- i2c@021a8000 gpio [ ] | | |-- gpio@30 gpio [ ] | | `-- gpio@32 Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Andrea Scian <andrea.scian@dave.eu> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Michal Simek <michal.simek@xilinx.com> #on ZynqMP zcu102
2016-04-01gpio: Add support for Qualcomm PM8916 gpiosMateusz Kulikowski
This driver supports GPIOs present on PM8916 PMIC. There are 2 device drivers inside: - GPIO driver (4 "generic" GPIOs) - Keypad driver that presents itself as GPIO with 2 inputs (power and reset) Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01gpio: Add support for Qualcomm gpio controllerMateusz Kulikowski
Add support for gpio controllers on Qualcomm Snapdragon devices. This devices are usually called Top Level Mode Multiplexing in Qualcomm documentation. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-24gpio: Add DM GPIO driver for Marvell MVEBUStefan Roese
This patch adds a DM GPIO driver for the Marvell MVEBU SoCs. There are other non-DM drivers that might be used on these platforms. But this patch creates a new DM driver. Which will be used by all Armada XP/38x boards. Other MVEBU SoC (Kirkwood / Orion) may follow once they support DM as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-03-17x86: broadwell: Add a GPIO driverSimon Glass
Add a GPIO driver for the GPIO peripheral found on broadwell devices. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-29gpio: uniphier: add driver for UniPhier GPIO controllerMasahiro Yamada
This GPIO controller device is used on UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-02-01drivers: gpio: add driver for Microchip PIC32 GPIO controller.Purna Chandra Mandal
In PIC32 GPIO controller is part of PIC32 pin controller. PIC32 has ten independently programmable ports and each with multiple pins. Each of these pins can be configured and used as GPIO, provided they are not in use for other peripherals. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-11-30gpio: atmel: Add the PIO4 driver supportWenyou Yang
The PIO4 is introduced from SAMA5D2, as a new version for Atmel PIO controller. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2015-09-02rockchip: gpio: Add rockchip GPIO driverSimon Glass
This supports RK3288 at present. It does not implement functions or support for pull up/down. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-23gpio: Add DW APB GPIO driverMarek Vasut
Add driver for the DesignWare APB GPIO IP block. This driver is DM capable and probes from DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org>
2015-08-12dm: gpio: hi6220: Add a hi6220 GPIO driver model driver.Peter Griffin
This patch adds support for the GPIO perif found on hi6220 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2015-07-21dm: gpio: Allow GPIO uclass to be used in SPLSimon Glass
Now that we support driver model in SPL, allow GPIO drivers to be used there also. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-08dm: gpio: vf610: Add GPIO driver supportBhuvanchandra DV
Add GPIO driver support to Freescale VF610 Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-05-04sunxi: axp: Move axp gpio code to a separate axpi-gpio driverHans de Goede
Move the axp-gpio code out of the drivers/power/axp*.c code, and into a new separate axpi-gpio driver. This change drops supports for the gpio3 pin on the axp209, as that requires special handling, and no boards are using it. Besides cleaning things up by moving the code to a separate driver, as a bonus this change also adds support for the (non vusb) gpio pins on the axp221 and the gpio pins on the axp152. The new axp-gpio driver gets its own Kconfig option, and is only enabled on boards which need it. Besides that it only gets enabled in the regular u-boot build and not for the SPL as we never need it in the SPL. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-29gpio: add Xilinx Zynq PS GPIO driverAndrea Scian
Most of the code is taken (and adapted) from Linux kernel driver. Just add CONFIG_ZYNQ_GPIO to you config to enable it Signed-off-by: Andrea Scian <andrea.scian@dave.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-22ARMv7M: Add STM32F4 supportrev13@wp.pl
Signed-off-by: Kamil Lulko <rev13@wp.pl> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-10lpc32xx: add GPIO supportAlbert ARIBAUD \(3ADEV\)
This driver only supports Driver Model, not legacy model. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-03-04dm: tegra: Enable driver model in SPL and adjust the GPIO driverSimon Glass
Use the full driver model GPIO and serial drivers in SPL now that these are supported. Since device tree is not available they will use platform data. Remove the special SPL GPIO function as it is no longer needed. This is all in one commit to maintain bisectability. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-28Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-07-23dm: gpio: Don't use the driver model uclass for SPLSimon Glass
Driver model does not support SPL yet, so we should not use the GPIO uclass for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-18sunxi: add gpio driverIan Campbell
This patch enables CONFIG_CMD_GPIO for the Allwinner (sunxi) platform as well as providing the common gpio API (gpio_request/free, direction in/out, get/set etc). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Henrik Nordström <henrik@henriknordstrom.net> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-03-04dm: Add GPIO support and testsSimon Glass
Add driver model support for GPIOs. Since existing GPIO drivers do not use driver model, this feature must be enabled by CONFIG_DM_GPIO. After all GPO drivers are converted over we can perhaps remove this config. Tests are provided for the sandbox implementation, and are a sufficient sanity check for basic operation. The GPIO uclass understands the concept of named banks of GPIOs, with each GPIO device providing a single bank. Within each bank the GPIOs are numbered using an offset from 0 to n-1. For example a bank named 'b' with 20 offsets will provide GPIOs named b0 to b19. Anonymous GPIO banks are also supported, and are just numbered without any prefix. Each time a GPIO driver is added to the uclass, the GPIOs are renumbered accordinging, so there is always a global GPIO numbering order. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-02-22gpio: kona: Add Kona gpio driverDarwin Rambo
Add support for the Kona GPIO controller found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tkryger@linaro.org>
2013-11-08Add support for SX151x SPI GPIO ExpandersViktar Palstsiuk
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
2013-10-31drivers: convert makefiles to Kbuild styleMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-07-30gpio: tca642x: Add the tca642x gpio expander driverDan Murphy
Add the tca642x gpio expander driver Datasheet: http://www.ti.com/product/tca6424a Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-19 14:17:49 +0000