index
:
u-boot-toradex.git
2011.12-colibri_vf
2014.04-toradex
2014.10-toradex
2014.10-toradex-next
2015.04-imx7-1.1.0_ga-toradex-next
2015.04-toradex
2015.04-toradex-next
2016.11-toradex
2016.11-toradex-next
colibri
colibri-next
colibri_vf
toradex_2019.07
toradex_2019.07-next
toradex_2020.07
toradex_imx6
toradex_imx_lf_v2022.04
toradex_imx_lf_v2024.04
toradex_imx_v2017.03_4.9.123_imx8mm_ga-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta1-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta2-bring_up
toradex_imx_v2018.03_4.14.62_1.0.0_beta-bringup
toradex_imx_v2018.03_4.14.78_1.0.0_ga-bringup
toradex_imx_v2018.03_4.14.98_2.3.0_bringup
toradex_imx_v2020.04_5.4.24_2.1.0
toradex_imx_v2020.04_5.4.70_2.3.0
toradex_ti-u-boot-2021.01_bringup
toradex_ti-u-boot-2023.04
toradex_ti-u-boot-2024.04
U-Boot bootloader for Apalis and Colibri modules
Toradex
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
cpu
/
blackfin
Age
Commit message (
Expand
)
Author
2009-02-21
Blackfin: disable syscontrol code for now
Mike Frysinger
2009-02-05
Blackfin: dynamically update UART speed when initializing
Mike Frysinger
2009-02-05
Blackfin: add support for fast SPI reads with Boot ROM
Mike Frysinger
2009-02-05
Blackfin: check for reserved settings in DDR MMRs
Mike Frysinger
2009-02-05
Blackfin: set default voltage levels for BF538/BF539 parts
Mike Frysinger
2009-02-05
Blackfin: use on-chip syscontrol() rom function when available
Mike Frysinger
2009-02-02
Blackfin: rewrite cache handling functions
Mike Frysinger
2009-02-02
Blackfin: enable --gc-sections
Mike Frysinger
2009-02-02
Blackfin: dont check baud if it wont actually get used
Mike Frysinger
2009-01-28
Blackfin: fixup misc warnings such as printf's and missing casts
Mike Frysinger
2009-01-28
Blackfin: allow serial console to be disabled
Mike Frysinger
2009-01-28
Blackfin: support console-over-JTAG
Mike Frysinger
2009-01-28
Blackfin: handle new anomalies with reset
Mike Frysinger
2009-01-28
Blackfin: pass RETX to Linux
Mike Frysinger
2009-01-28
Blackfin: clarify relocation comment during init
Mike Frysinger
2009-01-28
Blackfin: just set SP register directly during init
Mike Frysinger
2009-01-28
Blackfin: add portmuxing for UARTs on the BF51x
Mike Frysinger
2009-01-28
Blackfin: respect CONFIG_CLKIN_HALF
Mike Frysinger
2009-01-28
Blackfin: use common memcpy routine during init
Mike Frysinger
2009-01-28
Blackfin: overhaul i2c driver
Mike Frysinger
2009-01-28
Blackfin: fix dcache handling when doing dma memcpy's
Mike Frysinger
2009-01-28
Blackfin: minimize time cache is turned off when replacing cplb entries
Mike Frysinger
2008-12-15
i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Timur Tabi
2008-10-23
Blackfin: fix up UART status bit handling
Mike Frysinger
2008-10-23
Blackfin: small cpu init optimization while setting interrupt mask
Mike Frysinger
2008-10-23
Blackfin: set initial stack correctly according to Blackfin ABI
Mike Frysinger
2008-10-23
Blackfin: make baud calculation more accurate
Mike Frysinger
2008-10-23
Blackfin: decode hwerrcause/excause when crashing
Mike Frysinger
2008-10-23
Blackfin: fix register dump messages
Mike Frysinger
2008-10-23
Blackfin: don't bother displaying reboot msg when crashing
Mike Frysinger
2008-10-23
Blackfin: enable support for nested interrupts
Mike Frysinger
2008-10-23
Blackfin: drop unused cache flush code
Mike Frysinger
2008-10-23
Blackfin: unify cache handling code
Mike Frysinger
2008-10-23
Blackfin: only enable hardware error irq by default
Mike Frysinger
2008-10-18
rename CFG_ macros to CONFIG_SYS
Jean-Christophe PLAGNIOL-VILLARD
2008-05-21
Big white-space cleanup.
Wolfgang Denk
2008-03-30
Blackfin: unify cpu and boot modes
Mike Frysinger
