Age | Commit message (Collapse) | Author |
|
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Enable env import by default. It is enabled in other modules too
and it is required to boot TorizonCore.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
|
|
Enable USB fastboot support (CONFIG_FASTBOOT).
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
|
Enable env import by default. It is enabled in other modules too
and it is required to boot TorizonCore.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Clean-up configuration moving some stuff from include header file to
Kconfig defconfig.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Fix Ethernet functionality. The FEC clock on i.MX 8X really has an
additional by 2 divider plus our design requires the ENET0_RCLK50M_OUT
on the ENET0_RGMII_TXC pin to be turned on for the Micrel PHY.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Clean-up configuration moving some stuff from include header file to
Kconfig defconfig.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit eb0ed0e4283385700db1e5080d78f9a2684f98a5)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 3a5cc1cf85b8e22da78d794a2d71c03490f500b6)
|
|
Initial board support for Colibri iMX8QXP using a copy of Apalis iMX8.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 62f0f03e1acb4bb6b0fcca8d4e9bd4d2df04ad33)
(cherry picked from commit be14c3ea1850e2614883c86b62fd1c3a1828eac2)
|
|
Add Toradex config block support for i.MX8QM.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 18426b50681e6cd64ab5977f0ba84efd3f7c4495)
(cherry picked from commit c6d0e1042170d273a5b5434abe867213155d5582)
(cherry picked from commit ae31e946da33510a352795de09aa1c0ea9fc8280)
(cherry picked from commit 0798437c661ef3ca11f84fb45b4cce5b7ac145d9)
|
|
Extend bootcmd to also load the HDMI firmware through hdp
command.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 41ef3986ae21dc6fcc4355ab53ccc809d80d361e)
(cherry picked from commit 94d78f51638f4ab3519b845c4fbffe92865cc5b3)
(cherry picked from commit cad9542ed852cee3d3dd0b6c25a36a0de6f22c29)
(cherry picked from commit 331fc0f28dc6b3a4938c66a5788041e527eabc8b)
|
|
Make sure that all pins connected to the Micrel KSZ9031 PHY
are muxed. Properly reset the PHY after all muxing has been
applied. This makes sure that strapping is not overwritten by
the SoC default mux (particularly it makes sure that CLK125_NDO
is not driven low during reset).
Make sure to not use CONFIG_DM_ETH as it seems to break ETH
support as is.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit f0a1ceb6f5e2ab3b3618190541b1e7a9fd4c1e4a)
(cherry picked from commit 8f6405070189a8744c2f6a9d9a6e041554fb9046)
(cherry picked from commit 6f24c637fd7725a27249d6a950f587134f30b97c)
(cherry picked from commit 1b3c97e1eb50a56066820596a6b1b83da465af7f)
|
|
The Apalis iMX8 module does not have PCA9557 GPIO controllers
on the module.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit c80b3bfbe693d5a8851129f4878d0cd3a7325d13)
(cherry picked from commit 898ae105703cd0019a542bc0a17649339c934fa6)
(cherry picked from commit 69d385444efa79d2909f772c4a4b404d1bd7274d)
(cherry picked from commit 0f5887d5b80f8535a7f422b73d7a0bf4a4e445af)
|
|
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit aa830cb6a7c953ce85232b2ae951543ab1060948)
(cherry picked from commit f6c37cdf31633a541078d0813ab4f59f6b80babb)
(cherry picked from commit ae70d02213beabcd60853f655e2ff9849375c45c)
(cherry picked from commit ba629689c627a571d5902a1c50fe9927424b45c6)
|
|
Initial board support for Apalis iMX8 using a copy of NXP
iMX8QM ARM2 LPDDR4 board.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 68e401998ba0654292b7914b85433d8453202ec8)
(cherry picked from commit 6b9234fa1f5889f0eeecc6147afffbc859933c99)
(cherry picked from commit 0b7feded806717b4292615373ed6c018324b8ef5)
Conflicts:
arch/arm/cpu/armv8/imx8/Kconfig, file moved
(cherry picked from commit 393dd8dd4061833fcc3cfd85886d49160b515ce0)
|
|
To avoid end user executing uboot command through fastboot, the fastboot
command of "ucmd" and "acmd" in the uboot to be flashed into
non-volatile storage device is removed in this partch.
Change-Id: I999b8688a53c2201d02979be68266afc110dfb15
Signed-off-by: faqiang.zhu <faqiang.zhu@nxp.com>
|
|
To align aiy_imx8mq uboot used by uuu with other platforms, a defconfig
used to configure and build uboot used by uuu is added.
This "imx8mq_aiy_android_uuu_defconfig" for now is a copy of below file:
imx8mq_aiy_android_defconfig
Change-Id: I7c96297fa13fa7bb02117ceee8675e95f86e7b60
Signed-off-by: faqiang.zhu <faqiang.zhu@nxp.com>
|
|
Open configs to enable trusty for imx8mm_evk and also
add new config imx8mm_evk_android_trusty_defconfig based
on imx8mm_evk_android_defconfig.
Test: Trusty starts ok.
Change-Id: Iaea90de21f886ed23082a5e8e8d2fa7fb139a9cb
Signed-off-by: Ji Luo <ji.luo@nxp.com>
|
|
Enable the memory operation commands because we need them
sometimes, this won't increase much boot time.
Test: build and boot on imx8qm_mek.
Change-Id: Idad8de845203c3d958dd58c58b17b7d8a5d65b4f
Signed-off-by: Ji Luo <ji.luo@nxp.com>
|
|
uuu doesn't parse SPL+FIT format for mek_8q platforms. this patch
delete SPL and FIT related configurations in defconfig file for uuu
uboot.
Change-Id: If7c352a60a1534b1a5af9f0b661953c9c60191dc
Signed-off-by: faqiang.zhu <faqiang.zhu@nxp.com>
|
|
defconfig files for uuu uboot and uboot flashed to board need to be
different.
because ab slot feature need to be used, defconfig of BSP team won't
be used.
this patch add for defconfig files for uuu uboot used on imx8. these
two files are directly copied from the files below:
1. imx8qm_mek_android_defconfig
2. imx8qxp_mek_android_defconfig
3. imx8mm_evk_android_defconfig
4. imx8mq_evk_android_defconfig
they are respectively be pasted as:
1. imx8qm_mek_android_uuu_defconfig
2. imx8qxp_mek_android_uuu_defconfig
3. imx8mm_evk_android_uuu_defconfig
4. imx8mq_evk_android_uuu_defconfig
Change-Id: I483593beb99477f1821c529254856d372d274661
Signed-off-by: faqiang.zhu <faqiang.zhu@nxp.com>
|
|
for 8qxp_mek and 8qm_mek platforms, container is used instead of FIT,
SPL now will load container, not FIT.
This modification can minish the size of u-boot image.
Change-Id: Id7e3e62bf95db5941264c3370a3e092e9b77a42f
Signed-off-by: faqiang.zhu <faqiang.zhu@nxp.com>
|
|
Fix typo "ONFIG_CMD_FLASH=y" in defconfig, correct it to
CONFIG_CMD_FLASH=y
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit eabb33f2a422aa677816bb984efd1885ae3b9c19)
|
|
Too many macros are used in fsl_avbkey.c and
make it difficult to maintain.
This patch made some refine by:
1. Move all avb/atx operations to fsl_avb.c.
2. Refine the functions logic.
3. Drop some unsupported conditions/functions.
Test: build and boot on
imx8qm_mek/imx8mq_evk/imx6qp_sabresd/imx7d_pico/imx8m_aiy.
Change-Id: I5c99732acfc47d53cdf188d69223983777e577f4
Signed-off-by: Luo Ji <ji.luo@nxp.com>
|
|
Enable dm usb using the base board otg usb port for fastboot usage
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
|
|
Enable dm serial for xen uboot.
Log as below:
#xl console 1
MMC: FSL_SDHC: 0
Loading Environment from <NULL>... *** Warning - bad CRC, using default environment
Failed (-5)
In: serial@5a060000
Out: serial@5a060000
Err: serial@5a060000
flash target is MMC:0
Fastboot: Normal
Normal Boot
=>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Flynn xu <flynn.xu@nxp.com>
|
|
Enable HAB for imx8m Android Things platform, this will enable
HAB verify for bootloader.img(atf+tee+u-boot) at spl stage.
Disable the HAB verify for bootimg because we will use AVB to
verify it.
Test: Build and boot ok on AIY.
Change-Id: Ia6ee456c7c5fa71afc3740689adf898f411c6c4e
Signed-off-by: Ji Luo <ji.luo@nxp.com>
|
|
Add fastboot commands "fastboot oem at-get-vboot-unlock-challenge"
and "fastboot oem at-unlock-vboot" to support the authenticated
unlock feature for Android Things devices. Use software random
numbers generator to generate the 16 bytes random challenge, it
should be replaced with hardware encrypted random generator when
the TEE part is ready.
Test: Generate unlock challenge by:
./avbtool make_atx_unlock_credential
--output=atx_unlock_credential.bin
--intermediate_key_certificate=atx_pik_certificate.bin
--unlock_key_certificate=atx_puk_certificate.bin
--challenge=my_generated_challenge.bin
--unlock_key=testkey_atx_puk.pem
validated the unlock credential successfully on imx7d_pico
and AIY.
Change-Id: I4b8cee87c9e96924169479b65020a081136681f6
Signed-off-by: Ji Luo <ji.luo@nxp.com>
|
|
Change-Id: Ia9e76742d0501d3222d5837057d8bc916f2ff989
Signed-off-by: Haoran.Wang <elven.wang@nxp.com>
|
|
Because sysdeps.h in trusty include stdint.h, so we need to define
USE_STDINT.
Test: Local build test and flash on imx7d. Verify provision som
key and product key succeed.
Bug: None
Change-Id: I08db7c10dd4453a87f15ff4432335fe4c41f9c5f
|
|
Some configs are missed in imx8mm_evk_fspi_defconfig file, so the FAT
commands are not supported in flexspi u-boot and cause kernel booting
failed from SD card.
Also add the missed splash screen configs for MIPI DSI.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
Refact the i.MX8MQ dram init flow to reuse the common dram
driver used by i.MX8MM.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
|
|
iMX8MM DDR3L validation board uses FPGA to link with SPI NOR flash
on ECSPI1 port. Update the codes and configurations to enable the
ECSPI1 to access SPI NOR in u-boot.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
Generate the key blob and store it to the last block of boot1 partition
after setting the rpmb key. The key blob should be checked in spl and be
passed to Trusty OS if it's valid. If the key blob are damaged, RPMB
storage proxy service will return fail and should make the device hang.
Test: Build and boot ok on imx8qm/qxp.
Change-Id: Ia274cd72109ab6ae15920e91b2a2008e1f1e667c
Signed-off-by: Ji Luo <ji.luo@nxp.com>
|
|
Add defconfig for nand on lpddr4 arm2 board
Signed-off-by: Teo Hall <teo.hall@nxp.com>
|
|
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Open configs to enable spl build for imx8q on both
Android and Android Auto.
Change-Id: Ide757086ad0208973ac8510ba4a2f1c84aecdfad
Signed-off-by: Luo Ji <ji.luo@nxp.com>
|
|
Add DDR3 init codes, board codes, defconfig and DTS into u-boot.
Basic modules are ready: SD, UART, I2C, USB host and NAND.
There is a FPGA on this board. It controls WDOG_B, and ENET PHY RESET.
So reset and ethernet won't work at default.
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
|
|
Add support for FIT image loading of ATF and uboot proper for iMX8QXP mek.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
Add support for FIT image loading of ATF and uboot proper for iMX8QM mek.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
enable fastboot for uuu in i.MX6ULL 14x14 QSPI config
Signed-off-by: Han Xu <han.xu@nxp.com>
|
|
Enabled fastboot relating macros in optee config to
support uuu.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
|
|
Specify the default dtb file for kernel boot per i.MX7ULP
board config.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Frank Li <Frank.li@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
|
|
This reverts commit 26766be89286cad4946655b3004ab0fc4ef63a65.
|
|
The current u-boot configures the fdt_file environment variable
to the file name of that built together with u-boot. Sometimes
Linux kernel needs another dtb file other than the one built with
u-boot. For example, imx7ulp needs to build imx7ulp-evk-qspi.dts for
u-boot, but the kernel needs imx7ulp-evk.dts. Adding this new
macro to let the user have an option to specify a dtb file to run
Linux kernel.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
|
|
Add the imx8qm_mek_spl_fspi_defconfig to allow booting from QSPI.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
|
|
Add a defconfig for SPL build for iMX8QM MEK board
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
|
|
Add imx8qxp_lpddr4_arm2_spl_defconfig for lpddr4 boards
Signed-off-by: Teo Hall <teo.hall@nxp.com>
|