summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-02-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes on ls1012a, ls1021a, ls1028ardb platforms Integrate fspi for ls1028a, add DM-I2C support, update secure boot header offset
2020-02-05Merge tag 'rpi-next-2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi - DFU support file operations lager then the default max size - add dfu support to dwc2 for bcm2835 - enable DFU for RPi4 - Fix RPi4 memory map to include the genet device - add driver for the genet ethernet device - enable network support in RPi4 config
2020-02-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Various minor fixes for x86 - Switch to ACPI mode on Intel edison - Support run-time configuration for NS16550 driver - Update coreboot and slimbootloader serial drivers to use NS16550 run-time configuration - ICH SPI driver fixes to hardware sequencing erase case - Move ITSS from Apollo Lake to a more generic location - Intel GPIO driver bug fixes - Move to vs2017-win2016 platform build host for Azure pipelines
2020-02-04dm: arm: ls1021a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1021A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04dm: arm64: ls1012a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1012A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04configs: ls1028a: Enable FSPI supportKuldeep Singh
Enable FSPI controller support. So, flash environment can now be used Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04configs: ls1012ardb: Enable CONFIG_SYS_RELOC_GD_ENV_ADDRKuldeep Singh
Enable the config for ls1012ardb as the entry got missed earlier. Fixes: 8d8ee47e03 ("env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol") Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04configs: j721e_evm_a72: Add GPIO supportFaiz Abbas
Enable CONFIG_DA8XX_GPIO to enable GPIO support. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_defconfig: Enable PCA953x IO expanderVignesh Raghavendra
Enable PCA953x IO expander to control MMC/SD power lines. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable DFU related configsVignesh Raghavendra
Enable DFU, Fastboot and USB mass storage gadget related configs Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable USB Gadget related configsVignesh Raghavendra
Enable USB Gadget for R5 SPL, A72 SPL and A72 U-Boot to support DFU boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5_defconfig: Increase early malloc sizeVignesh Raghavendra
Increase R5 SPL early malloc memory pool by ~7K to accommodate SPL USB DFU boot requirements Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_a72: Fix redundant environment offsetFaiz Abbas
The current environment offset overlaps with the sysfw area and whenever environment is saved in the redundant slot, it overwrites sysfw.itb. Fix the offset to prevent this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: am57xx_evm: Enable Android commandsSam Protsenko
Enable Android commands that will be needed for Android 10 boot flow implementation, for all AM57x variants. Commands enabled: 1. 'abootimg': - CONFIG_CMD_ABOOTIMG=y 2. 'ab_select': - CONFIG_ANDROID_AB=y - CONFIG_CMD_AB_SELECT=y 3. 'avb': - CONFIG_LIBAVB=y - CONFIG_AVB_VERIFY=y - CONFIG_CMD_AVB=y While at it, resync defconfig files with "make savedefconfig". Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04test/py: android: Add test for abootimgSam Protsenko
Unit test for 'abootimg' command. Right now it covers dtb/dtbo functionality in Android Boot Image v2, which was added recently. Running test: $ ./test/py/test.py --bd sandbox --build -k test_abootimg shows that 1/1 tests passes successfully. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04x86: edison: Switch to ACPI modeAndy Shevchenko
SFI is quite poor and useless resource provider. Moreover it makes hard to develop and extend functionality in the Linux kernel. Enable a necessary minimum to use ACPI on Intel Edison. Linux kernel have been prepared for this change since v5.4, where the last crucial driver, i.e. for Basin Cove PMIC, has been submitted. Note, that stock image won't suffer by this change since it doesn't have ACPI enabled on the kernel level. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04x86: edison: Enable command line editingMarek Vasut
Enable command line editing, because it is extremely convenient. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-30configs: firefly-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSEMark Kettenis
This enables readning the cpuid from e-fuse, and deriving a static MAC address from it. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30rockchip: px30: remove CONFIG_OPTEE supportKever Yang
Rockchip use CONFIG_SPL_OPTEE for OPTEE support, which is load and run before U-Boot, but not use CONFIG_OPTEE which is after U-Boot. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30rockchip: Add Single boot image (with binman, pad_cat)Jagan Teki
All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets. This patch creates a single boot image component using - binman, for arm32 rockchip platforms - pad_cat, for arm64 rockchip platforms. This would help users to get rid of burning different boot stage images. The new image called 'u-boot-rockchip.bin' which can burn into flash like: ₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet. Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Cc: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30rockchip: rk3399: Enable DISPLAY_CPUINFOJagan Teki
RK3288, RK3399 are now support cpu-info, so enable DISPLAY_CPUINFO by default. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-30rockpro-rk3399: Enable SPI FlashJagan Teki
Enable winbond SPI flash for ROC-PC-RK3399 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30roc-pc-rk3399: Enable SPI FlashJagan Teki
Enable winbond SPI flash for ROC-PC-RK3399 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-29rpi4: Enable GENET Ethernet controllerAmit Singh Tomar
The Raspberry Pi 4 SoC features an integrated Gigabit Ethernet controller, connected as a platform device. Enable the new driver in the three applicable defconfigs, to allow TFTP booting on the board. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> [Andre: Add joined and 32-bit configs] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-01-29config: enable DFU over USB on Raspberry Pi4 boardsMarek Szyprowski
Enable support for DFU over USB. This requires to enable USB gadget, DWC2 UDC OTG driver and DFU command. DFU entities are defined for the following firmware objects: u-boot.bin, uboot.env, config.txt, and zImage/Image. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-01-28Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
- Various exynos fixes
2020-01-27tbs2910: add custom CONFIG_OF_REMOVE_PROPS list to defconfigAnatolij Gustschin
This shrinks the image size: all -3840.0 text -3840.0 Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Soeren Moch <smoch@web.de>
2020-01-28arm: exynos: Read default MMC device from XOM[7:5] pinsMarek Szyprowski
XOM pins provide information for iROM bootloader about the boot device. Those pins are mapped to lower bits of OP_MODE register (0x10000008), which is common for all Exynos SoC variants. Set the default MMC device id to reflect the boot device selected by XOM[7:5] pins (2 for the SD or 0 for the eMMC). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-26Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai) - Allwinner R40 Ethernet, usb phy enablement (Andre Przywara) - Sunxi auto load from 128KB MMC offset (Andre Przywara) - Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-26configs: Orange Pi Win: enable ethernet phyJernej Skrabec
Orange Pi Win has gigabit ethernet port, but default U-Boot configuration for that board enabled ethernet driver but didn't enable realtek phy. Fix that. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a, ls1088a platforms: - lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes
2020-01-25fastboot: mt85xx: add command to flash/erase emmc hwpartmingming lee
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25configs: mt8518: Enable fastboot related configsmingming lee
Enable EFI module. Enable fastboot. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25configs: mt8518: enable usb gadget drivermingming lee
Enable board_late_init and usb gadget for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-24sunxi: Add Libre Computer ALL-H5-CC H5 boardChen-Yu Tsai
The Libre Computer ALL-H5-CC board is an upgraded version of the ALL-H3-CC. Changes include: - Gigabit Ethernet via external RTL8211E Ethernet PHY - 16 MiB SPI NOR flash memory - PoE tap header - Line out jack removed Only H5 variant test samples were made available, and the vendor is not certain whether other SoC variants would be made or not. Furthermore the board is a minor upgrade compared to the ALL-H3-CC. Thus the device tree simply includes the one for the ALL-H3-CC, and adds the changes on top. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: Add Libre Computer ALL-H3-IT H5 boardChen-Yu Tsai
The Libre Computer ALL-H3-IT board is a small single board computer that is roughly the same size as the Raspberry Pi Zero, or around 20% smaller than a credit card. The board features: - H2, H3, or H5 SoC from Allwinner - 2 DDR3 DRAM chips - Realtek RTL8821CU based WiFi module - 128 Mbit SPI-NOR flash - micro-SD card slot - micro HDMI video output - FPC connector for camera sensor module - generic Raspberri-Pi style 40 pin GPIO header - additional pin headers for extra USB host ports, ananlog audio and IR receiver Only H5 variant test samples were made available, but the vendor does have plans to include at least an H3 variant. Thus the device tree is split much like the ALL-H3-CC, with a common dtsi file for the board design, and separate dts files including the common board file and the SoC dtsi file. The other variants will be added as they are made available. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: move CONFIG_SYS_SPI_U_BOOT_OFFS out of defconfigAndre Przywara
For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a board choice: The boot ROM only loads the SPL from offset 0 of the SPI NOR flash, and loads at most 32KB. This is a similar situation as on MMC, so consequently we create our "joint" image (SPL + U-Boot proper) with that 32KB offset during the build. So define the value of this symbol to be 32KB by default for every Allwinner SoC. This removes the definition of this symbol from the _defconfig files, and avoids every board to define this over and over again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: defconfig: R40 boards: enable USBAndre Przywara
Now that the USB PHY on the Allwinner R40 SoC is supported, enable USB support for the two R40 boards U-Boot supports. For this we need to add the GPIO pin that powers the USB port(s), also enable the usual suspects (OHCI/EHCI support). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: defconfig: Bananapi M2 Berry: enable EthernetAndre Przywara
The M2 Berry features the normal Gigabit PHY connected to the SoC's MAC, so enable the sun8i-emac driver to support Ethernet on the board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24configs: ls1028aqds: enable mdio muxing by defaultAlex Marginean
LS1028A QDS boards have a MDIO MUX and they require the driver for it for PHYs to work. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: fsl-layerscape: secure_boot: Enable setexpr commandUdit Agarwal
setexpr command is used while running secure boot (chain of trust with confidentiality) feature. Enable CONFIG_CMD_SETEXPR to enable setexpr command. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24board: fsl: ls1028a: free up arch_misc_initAlex Marginean
Currently LS1028A board code uses arch_misc_init to set up the board mux on QDS. Move this code to misc_init_r. This is consistent with LS gen 2 and T series SoCs/boards. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24board: fsl: lx2160a: free up arch_misc_initAlex Marginean
Currently LX2 board code uses arch_misc_init to set up the board mux on RDB and QDS. Move this code to misc_init_r. This is consistent with LS gen 2 and T series SoCs/boards. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: lx2160a: enable CONFIG_OF_BOARD_FIXUP for SECURE_BOOT defconfigWasim Khan
lx2160a rev1 and rev2 SoC has different pcie controller. The pcie controller device tree node fields "compatible" and registers names needs to be updated accordingly. Enable CONFIG_OF_BOARD_FIXUP to apply board_fix_fdt which updates the "compatible" and registers names. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Common device tree fixup for NXP SoCsWasim Khan
Add Common device tree fixup for NXP SoCs. Based on SoC and revision call pcie_layerscape or pcie_layerscape_gen4 fixup. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: ls1012afwry: Enable usb network cards supportYinbo Zhu
Enable RTL8152, AX88179 and AX8817X USB network cards support for ls1012afwry Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: ls1088ardb: Enable usb network cards supportYinbo Zhu
Enable RTL8152, AX88179 and AX8817X USB network cards support for ls1088ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: ls1046afwry: Enable usb network cards supportYinbo Zhu
Enable RTL8152, AX88179 and AX8817X USB network cards support for ls1046afrwy Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-23arm/km: remove unmaintained board kmsuv31Holger Brunck
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-23arm/km: remove unmaintained board SUGP1Holger Brunck
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-05 16:36:57 +0000