summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-31Merge https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
- rzg2_beacon updates
2021-10-31board: samsung: add support for Galaxy A series of 2017 (a5y17lte)Dzmitry Sankouski
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones. U-boot can be used as chain-loaded bootloader to gain control on booting vanilla linux(and possibly others) kernels Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31arm: dts: apple: Add preliminary device treesMark Kettenis
Add preliminary device trees for the Apple M1 mini (2020) and Apple M1 Macbook Pro 13" (2020). Device tree bindings for the Apple M1 SoC are still being formalized and these device trees will be synchronized with the Linux kernel as needed. The device trees in this commit are based on the initial Apple M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl, pmgr, usb based on bindings on track for inclusion in Linux 5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and watchdog that don't have a proposed binding yet. These device trees are provided as a reference only as U-Boot uses the device tree passed by the m1n1 bootloader. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31serial: s5p: Add Apple M1 supportMark Kettenis
Apple M1 SoCs include an S5L UART which is a variant of the S5P UART. Add support for this variant and enable it by default on Apple SoCs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: apple: Add initial support for Apple's M1 SoCMark Kettenis
Add support for Apple's M1 SoC that is used in "Apple Silicon" Macs. This builds a basic U-Boot that can be used as a payload for the m1n1 boot loader being developed by the Asahi Linux project. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Add MAINTAINERS entry]
2021-10-31test: Add tests for IOMMU uclassMark Kettenis
Add a set of tests for the IOMMU uclass. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-30ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfigAdam Ford
Now that the three M/N/H variants can be built from one config, rename the defconfig file to be more generic since it supports multiple RZ/G2. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: Beacon: Remove dead codeAdam Ford
There are a few do-nothing functions that can be removed. Remove them. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/HAdam Ford
Now that TARGET_BEACON_RZG2M can handle all the work that was done with TARGET_BEACON_RZG2N and TARGET_BEACON_RZG2H, remove them since they just create more duplicate code. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2MAdam Ford
The three different boards share the same board file and only differ in terms of which SoC is being used. By enabling FIT on TARGET_BEACON_RZG2M, it can support all three boards and elimate duplicate code. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-25Merge tag 'u-boot-imx-20211022' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561 - i.MX8: - Toradex Verdin (switch to binman, cleanup, etc.) - Phytec phycore_imx8mm (fixes, boot from SPI-NOR) - fixes for imx8mp_evk - doc (i.MX): MX8MM with Fast boot - i.MX6: - Toradex : colibri-imx6ull with eMMC, fixes - i.MX7ULP : - preparation for OPTEE + Serial Number - generic: - imx8m_image: Support ddr3 firmware
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
2021-10-21imx8mp_evk: Enable the DWC EQoS iMX driverYe Li
Enable the EQoS i.MX driver in defconfig, also enable the PHYLIB to facilitate the case that only has FEC enabled. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek) - a37xx: pci: Misc smaller fixes (Pali) - cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven) - termios_linux.h: Fix tcsendbreak() implementation (Pali) - mvebu: Add missing "if SPL" (Tom)
2021-10-21arm: mvebu: a3720: Create Kconfig option for I2C_MVMarek Behún
Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21arm: mvebu: turris_mox: Move options to defconfigMarek Behún
Move config options CONFIG_LAST_STAGE_INIT and CONFIG_DISPLAY_BOARDINFO_LATE to turris_mox_defconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21configs: add mkeficapsule to tools-only_defconfigHeinrich Schuchardt
mkeficapsule is used to create capsules for UEFI firmware update. To ease inclusion into U-Boot tools packages of Linux distributions we should add it to the tools-only_defconfig. Provide dummy values for CONFIG_AVB_BUF_ADDR, CONFIG_AVB_BUF_SIZE to satisfy Kconfig. Suggested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-20Merge tag 'u-boot-imx-20211020' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211020 ------------------- First PR from u-boot-imx for 2022.01 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535 - new board: kontron-sl-mx8mm - imx8m: - fix secure boot - imx ESDHC: fixes - i.MX53: Support thum2, bmode and fixes for Menlo board usbarmory switch to Ethernet driver model - imx6 : - DDR calibration for Toradex boards - imx7: - Fixes - Updated gateworks boards (ventana / venice) # gpg verification failed.
2021-10-20colibri-imx6ull: add emmc variantMax Krummenacher
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the 'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used on other SKUs. Related-to: ELB-4056, ELB-4057 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20board: phytec: imx8mm-phycore: Switch to binmanTeresa Remmet
Use binman for image creation. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20configs: phycore-imx8mm_defconfig: Enable clk commandTeresa Remmet
Enable clk command to dump clock tree. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20board: phytec: phycore-imx8mm: Add SPI-NOR flash supportTeresa Remmet
Adds SPI-NOR flash support to erase, read and write in bootloader. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20verdin-imx8mm: use preboot for fdtfile evaluationIgor Opaniuk
Enable and set preboot var with fdtfile evaluation. It will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20verdin-imx8mm: enable sleep_moci outputMax Krummenacher
This powers some peripherals on the carrier board e.g. the USB hub. Related-to: ELB-3206 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20verdin-imx8mm: switch to use binman to pack imagesMarcel Ziswiler
Use binman to pack images. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-20imx8mm-cl-iot-gate-optee: align config with KconfigStefano Babic
Due to missing configs, CI goes in deadlock until an OOM is tracked. Add CONFIG_SYS_LOAD_ADDR and replace CONFIG_SYS_EXTRA_OPTIONS with CONFIG_IMX_CONFIG. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org> CC: Fabio Estevam <festevam@denx.de>
2021-10-20kontron-sl-mx8mm: fix missing configs and deadlock in CIStefano Babic
Even if board can be successfuly built, CI goes in deadlock (see thread on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html). This is caused by SYS_CONFIG set in header file and because defconfig for the board is out of sync with Kconfig. As result, buildman goes on to read from stdin until an OOM is reached. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Frieder Schrempf <frieder.schrempf@kontron.de>
2021-10-19configs: am335x_evm: enable CONFIG_CLK_TI_CTRLAmjad Ouled-Ameur
This enables the clock controller driver support on TI's SoCs. This will fix this GPIO issue at boot time: request_and_set_gpio: Unable to request GPIO_PR1_MII_CTRL request_and_set_gpio: Unable to request GPIO_MUX_MII_CTRL request_and_set_gpio: Unable to request GPIO_FET_SWITCH_CTRL request_and_set_gpio: Unable to request GPIO_PHY_RESET This issue comes from the fact that the clock controller is not probed. Enable the TI's clock controller driver support to solve this. Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2021-10-19ARM: imx: mx5: Enable Thumb2 build on MX53 Menlo boardMarek Vasut
Build U-Boot in Thumb2 mode for M53Menlo board, this makes better use of the CPU since the instruction density is higher. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19ARM: imx: mx5: Enable BMODE command on MX53 Menlo boardMarek Vasut
The board can do primary/secondary boot switching, enable the bmode command. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfigRicardo Salveti
Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file. It also allows replacing the default CONFIG_BOOTCOMMAND without code modification. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-19smegw01: Select IMX_HABFabio Estevam
Select IMX_HAB to allow secure boot. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19smegw01: Add redundant environment supportFabio Estevam
Add redundant environment support as it is required by SWUpdate. While at it, place the CONFIG_ENV_OFFSET at 0x100000 to allow more headroom. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19apalis-imx6: use dynamic DDR calibrationFrancesco Dolcini
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-10-19colibri-imx6: use dynamic DDR calibrationFrancesco Dolcini
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-10-18board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boardsIlias Apalodimas
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. So let's remove the option in an effort to simplify U-Boot's config and DTB management, and use OF_BOARD instead. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-18riscv: Remove OF_PRIOR_STAGE from RISC-V boardsIlias Apalodimas
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. On RISC-V some of the boards pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary. So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-17Merge tag 'u-boot-rockchip-20211015' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Fix for Rockchip mmc HS400 mode; - Fix for px30 board Odroid Go; - rockchip_sfc update; - rk3568 clk update; - doc fix;
2021-10-15configs: Resync with savedefconfigTom Rini
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15rockchip: rk33xx: Drop ROCKCHIP_USB2_PHY on boards without itPeter Robinson
The 64 bit rk33xx chips don't have the ROCKCHIP_USB2_PHY IP so drop the configs as they were likely copied over from other boards during enablement. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
The bulk of it is Samuel's DM_I2C rework, which removes the nasty I2C deprecation warnings for most 32-bit boards. It also includes some smaller refactorings that pave the way for more changes, mostly driven by needing to support the Allwinner RISC-V SoC later on. Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board and official Pinetab support. Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3, H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there (where applicable).
2021-10-12configs: sandbox: add USB_ETHER and GADGET_DOWNLOAD gadget supportPatrice Chotard
This is needed for new gadget binding test. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Cc: Herbert Poetzl <herbert@13thfloor.at> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-12sunxi: video: Convert panel I2C to use DM_I2CSamuel Holland
Two displays supported by the sunxi display driver (each one used by a single board) require initialization over I2C. Both previously used i2c_soft; replace this with the i2c-gpio instance that already exists in those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus). Since the i2c-gpio nodes are not referenced by any other node in the device trees (the device trees have no panel node), the I2C bus is selected by its node name. This panel initialization code was the only i2c_soft user, so the i2c_soft GPIO setup code can be removed now as well. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12i2c: Add a DM_I2C driver for the sun8i RSB controllerSamuel Holland
This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12sunxi: Select SUN8I_RSB more carefullySamuel Holland
SUN8I_RSB should not be selected by MACH_SUN8I, because the hardware is not present in half of those SoCs (H3/H5, R40, and V3s). Move the selection to the SoCs where the hardware actually exists. As it currently stands, selecting that option also requires using it in some way, which is not the case for one A80 board. Since we have only three A80 boards in total, we select it their via their defconfigs. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixing up Sunchip_CX-A99 build] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-15 23:24:27 +0000