summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2021-02-19configs: enable CONFIG_MMC_PWRSEQ configurationJaehoon Chung
Enable CONFIG_MMC_PWRSEQ configuration about boards that is using rockchip_dw_mmc driver. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-02-18configs: rpi4: Enable DM_DMA across all RPi4 configurationsNicolas Saenz Julienne
The DM_DMA option is needed in order to translate physical address into bus addresses on a per-device basis. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18dm: test: Add test case for dev->dma_offsetNicolas Saenz Julienne
Add test to validate dev->dma_offset is properly set on devices. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18config: Enable iProc RNG200 driver in RPi4 configsMatthias Brugger
We find the iProc RNG200 in the Raspberry Pi 4. Add it to all it's config so that it can be used. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> [mb: drop rpi_4_32b_defconfig] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-16configs: ls1028a: Enable the Ethernet switch driver in defconfigAlex Marginean
The switch driver for LS1028A Ethernet switch is now compiled in for the NXP LS1028A reference design boards and for the Kontron SMARC-sAL28. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Michael Walle <michael@walle.cc>
2021-02-15configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove sh7763rdp boardTom Rini
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove sh7757lcr boardTom Rini
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. As this is the last SH4A board, remove that support as well. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove sh7753evb boardTom Rini
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove sh7752evb boardTom Rini
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove r7780mp boardTom Rini
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Patch-cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Patch-cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove MigoR boardTom Rini
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15ppc: Remove MPC8641HPCN boardTom Rini
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15ppc: Remove MPC8610HPCD boardTom Rini
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15ppc: Remove MPC8572DS boardTom Rini
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15ppc: Remove MPC8544DS boardTom Rini
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15arm: Remove db-88f6281-bp boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Chris Packham <judge.packham@gmail.com>
2021-02-15arm: Remove ls2080a_simu boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15arm: Remove mx35pdk boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2021-02-15arm: Remove apx4devkit boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lauri Hintsala <lauri.hintsala@silabs.com<mailto:lauri.hintsala@silabs.com>> Signed-off-by: Tom Rini <trini@konsulko.com<mailto:trini@konsulko.com>>
2021-02-10Merge tag 'u-boot-amlogic-20210210' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Add configuration helpers for MIPI D-PHY - generic-phy: add configure op - Add Amlogic AXG MIPI D-PHY driver & MIPI PCIe Analog PHY driver - odroid: add runtime detection of the N2/N2+/C4/HC4 variants
2021-02-10board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variantsMarek Szyprowski
Use the ADC channel 1 to check the hardware revision of the board and detect the N2 vs. N2+ and the C4 vs. HC4 variants. Each of them use different dtb file, so adjust fdtfile environment variable to the detected variant. The ADC min/max values for each variant are taken from the vendor code, adjusted to the 12-bit ADC driver operation mode (vendor code use 10-bit mode). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-09configs: stm32mp1: enable the fastboot oem command bootbusPatrick Delaunay
Enable the fastboot oem command bootbus, used to configure the eMMC boot behavior, with same format than 'mmc bootbus' and with parameter: boot_bus_width reset_boot_bus_width boot_mode On stm32mp1 boards the expected command is $> fastboot oem partconf:0 0 0 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-09configs: stm32mp1: enable the fastboot oem command partconfPatrick Delaunay
Enable the fastboot oem command partconf, used to select the correct eMMC boot partition, with same format than 'mmc partconf' with parameter: boot_ack boot_partition On stm32mp1 family: - boot_ack = 1 (Boot Acknowledge is needed by ROM code) - boot_partition = 1 or 2 (Boot partition 1 / 2 enabled for boot) So on EV1 board the expected commands to select boot partition 1 or 2 $> fastboot oem partconf:1 1 $> fastboot oem partconf:1 2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-09configs: stm32mp1: enable the fastboot oem command formatJean-Philippe ROMAIN
Enable the fastboot oem command format and set the variable "partitions" with default eMMC partitions list. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Jean-Philippe ROMAIN <jean-philippe.romain@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-09configs: stm32mp1: enable fastboot support of eMMC boot partitionJean-Philippe ROMAIN
Activate fastboot support on boot partition for eMMC, mmc1 device on STMicroelectronics board (EV1). Signed-off-by: Jean-Philippe ROMAIN <jean-philippe.romain@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-02-08Merge git://git.denx.de/u-boot-marvellTom Rini
- Espressobin: Set default env values at runtime (Pali) - Espressobin: Set the maximum slave SPI speed to 40MHz (Pali) - theadorable: PCIe test code enhancement and early deemphasis enabling (Stefan) - pci_mvebu: Disable config access to PCI host bridge ports (Stefan) - mv_sdhci: parse device-tree entry (Baruch)
2021-02-08Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Layerscape: Enable gpio Bug fixes & updates related to dspi, qspi, pciep, SVR mask, stream-id, env variables, mdio for LAyerscape Platforms Add SATA, network variant 1, 2 support on sl28 powerpc: T1042: drop CONFIG_VIDEO, Add kmcent2 board supporrt, keymile Bug fixes and updates for keymile, Kontron
2021-02-08Merge git://git.denx.de/u-boot-shTom Rini
- Beacon EmbeddedWorks RZG2H/N Dev Kit support
2021-02-08configs: lx2160aqds: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board lx2160aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: lx2160ardb: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board lx2160ardb Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1088ardb: enable DM_GPIO and CMD_GPIOBiwen Li
Enable DM_GPIO and CMD_GPIO for board ls1088ardb Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1088aqds: enable DM_GPIO and CMD_GPIOBiwen Li
Enable DM_GPIO and CMD_GPIO for board ls1088aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls2088aqds: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls2088aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls2088ardb: enable DM_GPIO and CMD_GPIOBiwen Li
Enable DM_GPIO and CMD_GPIO for board ls2088ardb Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1046aqds: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls1046aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1046ardb: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls1046ardb Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1043ardb: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls1043ardb Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1043aqds: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls1043aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1028ardb: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls1028ardb Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1028aqds: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls1028aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1021atwr: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for ls1021atwr Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1021aqds: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for board ls1021aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1012ardb: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for ls1012ardb Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: ls1012afrwy: enable CMD_GPIOBiwen Li
Enable CMD_GPIO for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08configs: T1042: Drop the CONFIG_VIDEOHou Zhiqiang
Drop the CONFIG_VIDEO to fix the following build warning. ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. UPD include/generated/dt.h Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. UPD include/generated/timestamp_autogenerated.h ==================================================== Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08PowerPC: keymile: Add support for kmcent2 boardNiel Fourie
Add basic support for the Hitachi Power Grids kmcent2 board, based on the NXP QorIQ T1040 SoC. Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> [Fixed blank line at EOF errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: sl28: add SATA supportMichael Walle
Enable SATA support. Although not supported by the usual SATA pins on the SMARC baseboard connector, SATA mode is supported on a PCIe lane. This way one can use a mSATA card in a Mini PCI slot. We need to invert the received data because in this mode the polarity of the SerDes lane is swapped. Provide a fixup in board_early_init_f() for the SPL. board_early_init_f() is then not common between SPL and u-boot proper anymore, thus common.c is removed, as it just contained said function. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: kontron: disable flash unlock allMichael Walle
Although the status register is protected by the hardware write protection, there is a hardware jumper to disable that hardware write protection. Thus if a user would set this jumper any u-boot start would disable the write protection altogether. Circumvent that by not disabling the write protection in the first place. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHzKonstantin Porotchkin
While the SPI controller speed is defined by DTS, the maximum slave speed (connected devices) is limited by the pre-defined configuration value CONFIG_SF_DEFAULT_SPEED to 1MHz This patch increases this maximum SPI slave device speed to 40MHz Change-Id: I0d1239bd8a2061c66725c2c227c1e1f49c92c29e Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/59516 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> [pali: Set CONFIG_SF_DEFAULT_SPEED via defconfig] Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-04 17:17:35 +0000