summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2019-12-10riscv: ax25-ae350: add SPL configurationRick Chen
This patch provides four configurations which can support U-Boot SPL to boot from RAM or FLASH and then boot FIT image including OpenSBI FW_DYNAMIC firmware and U-Boot proper images from RAM or MMC boot devices. With ae350_rv[32|64]_spl_defconfigs: U-Boot SPL will be loaded by gdb or FSBL and runs in RAM in machine mode and then load FIT image from RAM device on AE350. With ae350_rv[32|64]_spl_xip_defconfigs: U-Boot SPL can be burned into SPI flash and run in flash in machine mode and then load FIT image from SPI flash or MMC device on AE350. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10Use dts support from U-Boot via OF_SEPARATE instead of depending from opensbi.Rick Chen
This would help to make the necessary changes in drivers and device trees in U-Boot tree itself. This feature would also be helpful to not pass dtb during opensbi builds. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Rick Chen <rick@andestech.com>
2019-12-09Merge tag 'u-boot-imx-20191209' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.01 ----------------- - imx8qxp_mek: increase buffer sizes and args number - Fixes for imx7ulp - imx8mm: Fix the first root clock in imx8mm_ahb_sels[] - colibri_imx7: reserve DDR memory for Cortex-M4 - vining2000: fixes and convert to ethernet DM - imx8m: fix rom version check to unbreak some B0 chips - tbs2910: Disable VxWorks image booting support
2019-12-06Merge tag 'u-boot-rockchip-20191206' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rockchip pwm driver update to support all the SoCs - RK3308 GMAC and pinctrl support - More UART interface support on PX30 and pmugrf reg fix - Fixup on misc for eth_addr/serial# - Other updates on variant SoCs
2019-12-06ARM: imx: vining2000: Enable fitImage supportMarek Vasut
The fitImage support was enabled in the downstream U-Boot port and the kernel images on the device are fitImage, yet this functionality is not enabled in mainline U-Boot. Enable it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2019-12-06ARM: imx: vining2000: Convert to ethernet DMMarek Vasut
Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2019-12-06ARM: imx: vining2000: Enable DDR DRAM calibrationMarek Vasut
Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2019-12-06ARM: imx: vining2000: Convert to SPL frameworkMarek Vasut
In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2019-12-06warp7: Fix U-Boot corruption after saving the environmentFabio Estevam
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" followed by a "reset" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io> Acked-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Joris Offouga <offougajoris@gmail.com>
2019-12-06rockchip: rk3328: rock64: enable CONFIG_MISC_INIT_RBen Wolsieffer
This enables reading of the cpuid and a static MAC address. Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06rockchip: config: add support for firefly-px30 boardKever Yang
This is a core board named Core-PX30-JD4 with a mainboard from Firefly, name it as firefly-px30 for now. This board can re-use the dts of PX30, the only difference is the UART IO, the firefly use UART2 M1 while evb use UART2 M0. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: evb-px5: disable NETAndy Yan
PX5 evb has no ETH port, so disable it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05ARM: omapl138_lcdk: Shrink code size by building with ThumbAdam Ford
SPL has limited available resources, and the performance between ARM and Thumb isn't that significant. This patch builds using Thumb instruction set to reduce the code size by nearly 6K. Original: text data bss dec hex filename 26526 4004 1376 31906 7ca2 spl/u-boot-spl Thumb: text data bss dec hex filename 20232 4004 1376 25612 640c spl/u-boot-spl Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-05ARM: da850-evm: Disable SYS_MMCSD_RAW_MODE_USE_SECTORAdam Ford
The da850-evm doesn't have the boot pins configured in a way to make MMC/SD booting an option, and MMC/SD support is not enabled in SPL. Therefore, there is no need to support raw mode mmc/sd support in SPL. This patch disables CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR Signed-off-by: Adam Ford <aford173@gmail.com>
2019-12-04Merge git://git.denx.de/u-boot-shTom Rini
- Convert some R-Car Gen3 platforms to DM_SPI{,_FLASH}
2019-12-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04dfu: add dependency on the raw NAND coreMiquel Raynal
CONFIG_DFU_NAND needs the raw NAND core being compiled. Also fix the colibri_vf defconfig to reflect this dependency. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04configs: ls104x/ls108x/ls208x: Build the raw NAND core with TFABOOTMiquel Raynal
Enabling TFABOOT configuration will compile-in a call to nand_read in the boot sequence. Handle the situation by also selecting officially the raw NAND core in this case. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-12-04configs: socfpga: mcvevk: Remove useless UBI infosMiquel Raynal
There is no flash on this board, there is no reason to define MTD environment variables nor UBI. Drop them from the configuration file. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Wolfgang Grandegger <wg@aries-embedded.de>
2019-12-04configs: remove MTD support from bcm11130 and M54418TWR defconfigsMiquel Raynal
While the right Kconfig entries were selected, because of the missing CMD_NAND symbol the raw NAND core was never compiled. Remove it from the defconfigs otherwise the build will fail. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Also do this on bcm11130_nand] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04configs: remove raw NAND core from k2g defconfigsMiquel Raynal
Due to previous Makefile organization, the raw NAND subdirectory was not compiled in if CMD_NAND was not enabled. Because the Denali driver does not compile with these boards (undefined environment offset), remove the dependency within the defconfig over the controller driver (was ignored anyway in the past). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-12-04configs: move CONFIG_MTD in defconfigs when set in arch includesMiquel Raynal
Let's be consistent and always declare CONFIG_MTD from the defconfig file when needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD is compiled when CMD_MTDPARTS is selectedMiquel Raynal
MTD support must be enabled when using mtdparts. Indeed, functions like get_mtd_info(), get_mtd_device() and put_mtd_device() are in drivers/mtd/mtd_uboot.c and are built only with CONFIG_MTD. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure CMD_NAND is compiled when its options are selectedMiquel Raynal
In some files, options of CMD_NAND are selected but not the command itself. Fix this inconsistency. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selectedMiquel Raynal
Raw NAND support must be enabled when the environment is in NAND. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selectedMiquel Raynal
UBI must be enabled when the environment is in UBI. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure UBI is compiled when using fastmapMiquel Raynal
UBI must be enabled when using fastmap, reflect this is defconfigs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD is compiled when there is a SPI NOR flash using MTDMiquel Raynal
MTD must be enabled when there is a SPI NOR flash using the SPI_FLASH_MTD config entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flashMiquel Raynal
Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04ARM: rmobile: Convert M2N Gose to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on M2N Gose. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-04ARM: rmobile: Convert M2W Koelsch to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on M2W Koelsch. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-04ARM: rmobile: Convert H2 Lager to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on H2 Lager. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-03mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTDMiquel Raynal
Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03mtd: rename CONFIG_MTD -> CONFIG_DM_MTDMiquel Raynal
CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03arm64: zynqmp: Point zcu216 defconfig to correct dts fileMichal Simek
Defconfig is pointing to incorrect DT file which needs to be fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-03ARM: MediaTek: add basic support for MT8518 boardsmingming lee
This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com> [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03ARM: omapl138_lcdk: Enable SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATEAdam Ford
In order to further prepare for full device tree support in SPL, this patch enables both SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE. Both of these are already enabled in U-Boot, so SPL will have the same functionality Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03ARM: omapl138_lcdk: Increase malloc pool before relocationAdam Ford
Driver model requires a malloc pool to allocate memory before relocations to operate serial and some other devices. This patch increases the pool size to 2K. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03ARM: omapl138_lcdk: Separate BSS in SPLAdam Ford
In preparation to use full device tree support, SPL can separate BSS from text region. This patch enables SPL_SEPARATE_BSS. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CORTINA_FW_IN_MMC CONFIG_SYS_CORTINA_FW_IN_NAND CONFIG_SYS_CORTINA_FW_IN_NOR CONFIG_SYS_CORTINA_FW_IN_REMOTE CONFIG_SYS_CORTINA_FW_IN_SPIFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03Convert CONFIG_PHY_CORTINA to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHY_CORTINA Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03tbs2910: Disable VxWorks image booting supportTom Rini
There are currently no known users of this functionality on this platform, disable it to prepare for additional VxWorks functionality that would cause this platform to fail to link. Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Soeren Moch <smoch@web.de>
2019-12-03tbs2910: Disable VxWorks image booting supportTom Rini
There are currently no known users of this functionality on this platform, disable it to prepare for additional VxWorks functionality that would cause this platform to fail to link. Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Soeren Moch <smoch@web.de>
2019-12-02Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- fsl-qoriq : Minor bug fixes and updates on lx2160a, ls1028a, ls1012a, ls1043aqds platforms
2019-12-02Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: remove Micronas VCT boards
2019-11-29MIPS: remove Micronas VCT boardsDaniel Schwierzeck
The deadline for migration to CONFIG_DM is v2020.01. The VCT baords would need an almost complete rewrite of all drivers to support driver model. Unless someone has access to the hardware and volunteers to do the migration, the board should be scheduled for removal. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Stefan Roese <sr@denx.de>
2019-11-29configs: ls1028a: enable CMD_DMAlex Marginean
Since at least some of the drivers relevant to LS1028A are now following DM, it's useful to have dm command enabled by default. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-29configs/lx2160a: Add CONFIG_ENV_SECT_SIZE in defconfigPriyanka Jain
Define CONFIG_ENV_SECT_SIZE as 0x20000 in lx2160a related defconfigs: lx2160ardb_tfa_defconfig, lx2160ardb_tfa_SECURE_BOOT_defconfig, lx2160aqds_tfa_defconfig, lx2160aqds_tfa_SECURE_BOOT_defconfig Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-28Merge git://git.denx.de/u-boot-usbTom Rini
- USB keyboard improvements
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-04 12:00:16 +0000