summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2018-01-22Convert CONFIG_USB_MUSB_OMAP2PLUS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_PIO_ONLY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22ARM: omap3_logic: Enable SPL_OF_CONTROL and SPL_OF_PLATDATAAdam Ford
The SPL doesn't have much room, so in order to support OF_CONTROL in SPL, we need the extra functionality of SPL_OF_PLATDATA. Adding these features allows us to remove a small part of code without losing the serial port during SPL. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-19Merge git://git.denx.de/u-boot-arcTom Rini
2018-01-19powerpc: Drop unreferenced CONFIG_* definesTuomas Tynkkynen
The following config symbols are only defined once and never referenced anywhere else: CONFIG_CYRUS CONFIG_IDS8313 CONFIG_MPC8308_P1M CONFIG_MPC8308RDB CONFIG_MPC8349EMDS CONFIG_MPC8349ITXGP CONFIG_SBC8349 CONFIG_SBC8548 CONFIG_SBC8641D CONFIG_TQM834X CONFIG_VE8313 CONFIG_XPEDITE5140 CONFIG_XPEDITE5200 CONFIG_XPEDITE550X Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Acked-by: Mario Six <mario.six@gdsys.cc>
2018-01-19configs: stm32: move config flag from defconfig to KconfigPatrice Chotard
Move system flags from defconfig to mach-stm32/Kconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-19serial: stm32: Rename serial_stm32x7.c to serial_stm32.cPatrice Chotard
Now this driver is used across stm32f4, stm32f7 and stm32h7 SoCs family, give it a generic name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-19ARM: qemu-arm: Add support for AArch64Tuomas Tynkkynen
This adds support for '-machine virt' on AArch64. This is rather simple: we just add TARGET_QEMU_ARM_xxBIT to select a few different Kconfig symbols, provide the ARMv8 memory map from the board file and add a new defconfig based on the 32-bit defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19rpi_0_w: Add configs consistent with RpI3Drew Moseley
CONFIG_OF_EMBED in particular is needed to allow the Raspberry Pi firmware to pass the DTB to U-Boot and on to the kernel. Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
2018-01-19ARM: dts: omap3-beagle{-xm}: Enable DM and devicetree for BeagleBoardDerald D. Woods
This commit updates the configuration files needed to support OF_CONTROL on the OMAP3 BeagleBoard(s).
2018-01-19ARM: dts: am574x-idk: Add initial supportLokesh Vutla
Add initial dts support for am574x-idk Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19ARC: HSDK: Hang on panicEugeniy Paltsev
As HSDK is a development board it is better to hang on panic instead of reset the board when panic occurs. That way we preserve a state of HW for possibility to do post-mortem debug via JTAG. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-17Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-01-17armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfigAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15Merge git://git.denx.de/u-boot-netTom Rini
2018-01-15Merge git://git.denx.de/u-boot-imxTom Rini
2018-01-15db410c: use the device tree parsed by the lk loader.Jorge Ramirez-Ortiz
We dont need to keep copies of the properties that we are going to fixup since we will be using the dtb provided by the firmware. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db410c: replace reset driver with psciJorge Ramirez-Ortiz
this should be the norm for armv8 platforms. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db410c: update wlan and bt mac addresses from firmwareJorge Ramirez-Ortiz
The firmware that runs before u-boot modifies u-boot's device tree adding the local-mac-address and local-bd-address properties for the compatibles "qcom,wcnss-bt" and "qcom,wcnss-wlan". This commit reads that firmware, retrieves the properties and fixups the device tree that is passed to the kernel before booting. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db820c: enable pmic gpios for pm8994Jorge Ramirez-Ortiz
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15db820c: add qualcomm dragonboard 820C supportJorge Ramirez-Ortiz
This commit adds support for 96Boards Dragonboard820C. The board is based on APQ8086 Qualcomm Soc, complying with the 96Boards specification. Features - 4x Kyro CPU (64 bit) up to 2.15GHz - USB2.0 - USB3.0 - ISP - Qualcomm Hexagon DSP - SD 3.0 (UHS-I) - UFS 2.0 - Qualcomm Adreno 530 GPU - GPS - BT 4.2 - Wi-Fi 2.4GHz, 5GHz (802.11ac) - PCIe 2.0 - MIPI-CSI, MIPI-DSI - I2S U-Boot boots chained from LK (LK implements the fastboot protocol) in 64-bit mode. For detailed build instructions see readme.txt in the board directory. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15board: ls1012a: LS1012A-2G5RDB board supportBhaskar Upadhaya
LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15net: sh-eth: Add to Kconfig and convertNobuhiro Iwamatsu
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15configs: Update Lamobo_R1 with B53 switch optionsFlorian Fainelli
Enable CONFIG_B53_SWITCH, define the CPU/management port number (8) and enable all 5 ports of the switch to be usable. Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-14Merge git://git.denx.de/u-boot-mmcTom Rini
2018-01-12ARM: imx: cm_fx6: env: try to determine dtb to useChristopher Spinrath
Some distributions like Fedora expect U-Boot to select a proper devicetree. Since there are several variants of the cm-fx6 module featuring different SoC variants and the module can be paired with several baseboards, it is not viable to hardcode a filename. Instead, follow the lead of other i.MX6 based devices and try to determine the devicetree to use with the help of the board name and the SoC variant exported by the board code, before calling the distro bootcommand. For now, only for the Utilite Pro a proper devicetree filename is known but further variants of the Utilite Computer or other devices based on the cm-fx6 module may be added in the future. Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
2018-01-12imx: mx6ull-14x14-evk: enable DM QSPI driverPeng Fan
To support QSPI DM driver - Add spi0 alias for qspi node. Which is used for bus number 0. - Modify the n25q256a@0 compatible property to "spi-flash". - Modify spi4 (gpio_spi) node to spi5 - Define DM SPI/QSPI related config to enable QSPI Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-12imx: mx6sxsabresd: Enable DM driverPeng Fan
Enable I2C/MMC/GPIO/REGUALTOR/PMIC/USB DM drivers. There are some dependency, such as when DM MMC enabled, USB compile error. Also the i.MX I2C MMC DM driver does not support legacy GPIO interface. So enable them all together. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12ARM: imx: Enable dts for i.MX6SX-SDBPeng Fan
Enable DTS and OF_CONTROL for i.MX6SX-SDB. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12mx6: Support SKS-Kinkel sksimx6 BoardStefano Babic
Board has 1GB RAM and boots from SD Card U-Boot SPL 2018.01-rc3-00005-ga1898b8 (Jan 02 2018 - 13:48:54) BT_FUSE_SEL already fused, will do nothing Trying to boot from MMC1 U-Boot 2018.01-rc3-00005-ga1898b8 (Jan 02 2018 - 13:48:54 +0100) CPU: Freescale i.MX6DL rev1.2 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 40C Reset cause: POR I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC [PRIME] Signed-off-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12riscv: defconfig: Add nx25-ae250 defconfig to support RISC-VRick Chen
Add nx25-ae250 default configuration for RISC-V Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com>
2018-01-12am335x_hs_evm: Trim options in SPL to reduce binary sizeTom Rini
The am335x_hs_evm runs into size constraint problems at times with various toolchains as changes come in due to the config have a large number of options in SPL (to showcase what is possible) while also having rather constrained binary limits. Gain some of this room back by lowering the loglevel, disabling HW partition support and switching over to the tiny FIT image support. Cc: Andrew F. Davis <afd@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> --- I'd really appreciate a run-time test of this patch if at all possible as I'm a little worried about TINY_FIT being incompatible with all of the security options. Thanks!
2018-01-12configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPLJean-Jacques Hiblot
The changes in the MMC stack have increased its footprint up to the point were its breaks the generation of the SPL for this platform. Fix this by reducing the loglevel. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Peter Howard <phoward@gme.net.au>
2018-01-12configs: openrd: removed support for eMMC hardware partitioningJean-Jacques Hiblot
builds are broken because the size of the binary exceeds the limit. Make some space by removing support for hardware partitioning as those boards don't have any eMMC. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-11Merge git://git.denx.de/u-boot-sunxiTom Rini
2018-01-12configs: sun50i: Enable eMMC on a64-olinuxinoJagan Teki
a64-olinuxino has 8GiB eMMC, enable it. Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-11Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-01-11Merge git://git.denx.de/u-boot-socfpgaTom Rini
2018-01-11Merge git://git.denx.de/u-boot-usbTom Rini
2018-01-10ls1088ardb: Add SD Secure boot target supportSumit Garg
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> [YS: run moveconfig.py -s] Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10configs: Move SYS_DPAA_QBMAN to KconfigAhmed Mansour
The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to add device tree fixups that allow deep sleep in Linux. The define was placed in header files included by a number of boards, but was not explicitly documented in any of the Kconfigs. A description was added to the drivers/networking menuconfig and default selection for current SOCs that have this part Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10Merge git://git.denx.de/u-boot-marvellTom Rini
2018-01-10configs: am57xx_evm: fix ethernet phy configurationSekhar Nori
Configure AM57xx EVMs for the exact PHY part that is present on the various boards. This makes U-Boot apply configurations needed for this PHY like centering the FLP timing. For configurations to take effect, DM_ETH needs to be enabled. Do that too. Tested on BeagleBoard x15 and AM571x IDK. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-01-10configs: stm32f746-disco: enable MMC related flagsPatrice Chotard
STM32F469-disco embeds an arm_pl180 mmc IP, so enable CMD_MMC, DM_MMC and ARM_PL180_MMCI flags. Also enables all filesystem command related flags : _ CMD_EXT2 _ CMD_EXT4 _ CMD_FAT _ CMD_FS_GENERIC _ CMD_GPT _ CMD_BOOTZ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10board: stm32: add stm32f469-discovery board supportPatrice Chotard
This board offers : _ STM32F469NIH6 microcontroller featuring 2 Mbytes of Flash memory and 324 Kbytes of RAM in BGA216 package _ On-board ST-LINK/V2-1 SWD debugger, supporting USB reenumeration capability: _ Mbed-enabled (mbed.org) _ USB functions: USB virtual COM port, mass storage, debug port _ 4 inches 800x480 pixel TFT color LCD with MIPI DSI interface and capacitive touch screen _ SAI Audio DAC, with a stereo headphone output jack _ 3 MEMS microphones _ MicroSD card connector _ I2C extension connector _ 4Mx32bit SDRAM _ 128-Mbit Quad-SPI NOR Flash _ Reset and wake-up buttons _ 4 color user LEDs _ USB OTG FS with Micro-AB connector _ Three power supply options: _ Expansion connectors and Arduino™ UNO V3 connectors Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driverPatrice Chotard
Use available DM stm32f7_gpio.c and pinctrl_stm32.c drivers instead of board GPIO initialization. Remove stm32_gpio.c which is no more used and migrate structs stm32_gpio_regs and stm32_gpio_priv into arch-stm32f4/gpio.h to not break compilation. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10board: stm32f429-disco: switch to DM STM32 clock driverPatrice Chotard
Use available DM clk_stm32f.c driver instead of dedicated mach-stm32/stm32f4/clock.c. Migrate periph_clock defines from stm32_periph.h directly in CLK driver. These periph_clock defines will be removed when STMMAC, TIMER2 and SYSCFG drivers will support DM CLK. Enable also CLK flag. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10board: stm32f429-disco: switch to DM STM32 serial driverPatrice Chotard
Remove serial_stm32.c driver and uart init from board file, use available DM serial_stm32x7.c driver compatible for STM32F4/F7 and H7 SoCs. The serial_stm32x7.c driver will be renamed later with a more generic name as it's shared with all STM32 Socs. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10configs: stm32f429-disco: enable MISC, STM32_RCC, DM_RESET and STM32_RESETPatrice Chotard
This allows to support rcc MFD driver. By enabling all these flags, we need to increase malloc area to avoid crash during early stage. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10board: stm32f429-discovery: switch to DM STM32 sdram driverPatrice Chotard
Use available DM stm32_sdram.c driver instead of board SDRAM initialization. For that, enable OF_CONTROL, OF_EMBED and STM32_SDRAM flags. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10rockchip: rk3288: enable rockusb support on rk3288 based deviceEddie Cai
this patch enable rockusb support on rk3288 based device. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-18 04:35:33 +0000